CONDITIONS and ANNEXURE - Exemption and effective rate of basic and additional duty for specified goods of Chapter 1 to 99 - 021/2002 Part-II - Customs -Tariff

Superseded vide Notification No.12/2012 Customs, dated 17/03/2012 Prescribes effective rate of duty on import of goods Notification - Customs - Cus ANNEXURE 21/2002 Part-I - Table Condition No. Conditions 1. The rate of duty specified in column (4) shall apply to such quantity of imports for which an importer holds a Tariff Rate Quota Allocation Certificate issued by the EXIM Facilitation Committee in the Directorate General of Foreign Trade in accordance with the procedure as may be specified by the EXIM Facilitation Committee in the Directorate General Of Foreign Trade from time to time through a Public Notice. 2. If the importer gives a declaration that such material is for the purposes of sowing or planting only. 3. Omitted 4. If the importer, is registered with the Directorate of Vanaspati, Vegetable Oils and Fats in the Department of Food and Public Distribution in the Government of India. 5. If the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996. 3 [5A. (a) If imported by a sugar factory or a sugar refinery. Explanation .- For the purpose of this notification - (i) sugar factory shall have the same meaning as assigned to it in Section 2(c) of the Sugarcane (Control) Order, 1966; (ii) sugar refinery means a unit which is engaged in the manufacture of refined sugar starting from the stage of raw sugar . (b) If imported by any person other than at (a) above: (i) the importer shall produce to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a valid contract or agreement with a sugar factory or sugar refinery for refining of such raw sugar and shall furnish a bond to the effect that the said raw sugar shall be used for the said purpose; (ii) The bond shall be discharged by the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, on production of a certificate from the Central Excise authorities having jurisdiction over such sugar factory within a period of three months from the date of import of such raw sugar that the entire quantity of imported raw sugar has been refined and (iii) in the event of his failure to comply with the above conditions, the importer shall be liable to pay, in respect of such quantity of the raw sugar as is not proven to have been refined, an amount equal to the difference between the duty leviable on such quantity but for the exemption contained herein. ; ] 3A [5B. If the importer produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a proof to show that the contract for import of such sugar is duly registered with Agricultural Processed Food Products Export Development Authority (APEDA) ] 23 [5C. If the importer, at the time of import, produces a certificate from a Chartered Accountant to the effect that the importer is a bulk consumer. Explanation ,- For the purpose of this notification,- (i) bulk consumer is a person, establishment or industrial unit using or consuming more than ten quintals of sugar per month as a raw material for production or consumption or use in any manner other than sale. (ii) the said certificate shall be issued by the Chartered Accountant after taking into account monthly use or consumption of sugar by such person, establishment or unit in the last twelve months; and (iii) Chartered Accountant shall have the same meaning as assigned to it in clause (b) of sub-section (1) of section 2 of the Chartered Accountant Act, 1949 .] 34 [5D. If imported by National Handloom Development Corporation up to an aggregate quantity not exceeding 2500 metric tonnes in a financial year under cover of a certificate from an officer not below the rank of Joint Secretary to the Government of India in the Ministry of Textiles. ] 36 [5D (a) If imported by a sugar factory or a sugar refinery. Explanation .- For the purpose of this notification - (i) sugar factory shall have the same meaning as assigned to it in Section 2(c) of the Sugarcane (Control) Order, 1966; (ii) sugar refinery means a unit which is engaged in the manufacture of refined sugar starting from the stage of raw sugar . (b) If imported by any person other than at (a) above: (i) the importer shall produce to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a valid contract or agreement with a sugar factory or sugar refinery for refining of such raw sugar and shall furnish a bond to the effect that the said raw sugar shall be used for the said purpose; (ii) the bond shall be discharged by the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, on production of a certificate from the Central Excise authorities having jurisdiction over such sugar factory within a period of three months from the date of import of such raw sugar that the entire quantity of imported raw sugar has been refined and (iii) in the event of his failure to comply with the above conditions, the importer shall be liable to pay, in respect of such quantity of the raw sugar as is not proven to have been refined, an amount equal to the difference between the duty leviable on such quantity but for the exemption contained herein. ; 5E If the importer produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a proof to show that the contract for import of such sugar is duly registered with Agricultural Processed Food Products Export Development Authority (APEDA) . 5F If the importer, at the time of import, produces a certificate from a Chartered Accountant to the effect that the importer is a bulk consumer. Explanation ,- For the purpose of this notification,- (i) bulk consumer is a person, establishment or industrial unit using or consuming more than ten quintals of sugar per month as a raw material for production or consumption or use in any manner other than sale. (ii) the said certificate shall be issued by the Chartered Accountant after taking into account monthly use or consumption of sugar by such person, establishment or unit in the last twelve months; and (iii) Chartered Accountant shall have the same meaning as assigned to it in clause (b) of sub-section (1) of section 2 of the Chartered Accountant Act, 1949. ] 45 [5G (a) If imported by a sugar factory or a sugar refinery. Explanation .- For the purpose of this notification - (i) sugar factory shall have the same meaning as assigned to it in Section 2(c) of the Sugarcane (Control) Order, 1966; (ii) sugar refinery means a unit which is engaged in the manufacture of refined sugar starting from the stage of raw sugar . (b) If imported by any person other than at (a) above: (i) the importer shall produce to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a valid contract or agreement with a sugar factory or sugar refinery for refining of such raw sugar and shall furnish a bond to the effect that the said raw sugar shall be used for the said purpose; (ii) the bond shall be discharged by the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, on production of a certificate from the Central Excise authorities having jurisdiction over such sugar factory within a period of three months from the date of import of such raw sugar that the entire quantity of imported raw sugar has been refined and (iii) in the event of his failure to comply with the above conditions, the importer shall be liable to pay, in respect of such quantity of the raw sugar as is not proven to have been refined, an amount equal to the difference between the duty leviable on such quantity but for the exemption contained herein. ; 5H If the importer produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a proof to show that the contract for import of such sugar is duly registered with Agricultural Processed Food Products Export Development Authority (APEDA) . 5I If the importer, at the time of import, produces a certificate from a Chartered Accountant to the effect that the importer is a bulk consumer. Explanation ,- For the purpose of this notification,- (i) bulk consumer is a person, establishment or industrial unit using or consuming more than ten quintals of sugar per month as a raw material for production or consumption or use in any manner other than sale. (ii) the said certificate shall be issued by the Chartered Accountant after taking into account monthly use or consumption of sugar by such person, establishment or unit in the last twelve months; and (iii) Chartered Accountant shall have the same meaning as assigned to it in clause (b) of sub-section (1) of section 2 of the Chartered Accountant Act, 1949.] 46 [5J (a) If imported by a sugar factory or a sugar refinery. Explanation.- For the purpose of this notification - (i) sugar factory shall have the same meaning as assigned to it in Section 2(c) of the Sugarcane (Control) Order, 1966; (ii) sugar refinery means a unit which is engaged in the manufacture of refined sugar starting from the stage of raw sugar . (b) If imported by any person other than at (a) above: (i) the importer shall produce to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a valid contract or agreement with a sugar factory or sugar refinery for refining of such raw sugar and shall furnish a bond to the effect that the said raw sugar shall be used for the said purpose; (ii) the bond shall be discharged by the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, on production of a certificate from the Central Excise authorities having jurisdiction over such sugar factory within a period of three months from the date of import of such raw sugar that the entire quantity of imported raw sugar has been refined and (iii) in the event of his failure to comply with the above conditions, the importer shall be liable to pay, in respect of such quantity of the raw sugar as is not proven to have been refined, an amount equal to the difference between the duty leviable on such quantity but for the exemption contained herein. ; 5K If the importer produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a proof to show that the contract for import of such sugar is duly registered with Agricultural Processed Food Products Export Development Authority (APEDA) . 5L If the importer, at the time of import, produces a certificate from a Chartered Accountant to the effect that the importer is a bulk consumer. Explanation,- For the purpose of this notification,- (i) bulk consumer is a person, establishment or industrial unit using or consuming more than ten quintals of sugar per month as a raw material for production or consumption or use in any manner other than sale. (ii) the said certificate shall be issued by the Chartered Accountant after taking into account monthly use or consumption of sugar by such person, establishment or unit in the last twelve months; and (iii) Chartered Accountant shall have the same meaning as assigned to it in clause (b) of sub-section (1) of section 2 of the Chartered Accountant Act, 1949.] 6. If the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, that the wine shall be used as sacramental wine 7. Omitted 8. If,- (a) the goods are imported by an individual for personal use; (b) it is certified in the Form below, by the Director General or Deputy Director General or Assistant Director General, Health Services, New Delhi, Director of Health Services of the State Government or the District Medical Officer/Civil Surgeon of the district, in each individual case, that the goods are life saving drugs or medicines; and (c) the importer produces the said certificate to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of clearance, or gives an undertaking as acceptable to the Deputy Commissioner or the Assistant Commissioner to furnish the said certificate within such period as may be specified by the Deputy Commissioner or the Assistant Commissioner, failing which to pay duty leviable thereon. Form Certificate No.... . of ... .. (year) Certified that the drug / medicine .(name of the drug / medicine) being imported by ................... is a life saving drug / medicine and exemption from the payment of customs duty is recommended. Signature with date of Director General / Deputy Director General / Assistant Director General, Health Services, New Delhi or Director of Health Services or District Medical Officer/Civil Surgeon. 9. If the importer at the time of import- (1) furnishes a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Atomic Energy, Government of India, to the effect that the imported goods (in respect of description, quantity and technical specifications) are required for the manufacture of laser and laser based instrumentation; and (2) furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the imported goods shall be used for the above purpose and he shall pay, on demand, in the event of his failure to use the imported goods for the above purpose, an amount equal to the difference between the duty leviable on such quantity of the imported goods but for the exemption under this notification and that already paid at the time of importation. 10. If,- (a) the importer produces a certificate from a duly authorised officer of the UNICEF to the effect that the said raw materials, intermediates and consumables are required for the manufacture of DTP vaccines; and (b) the importer, at the time of clearance, furnishes an undertaking, in each case, to the effect that the said raw materials, intermedi.0ates and consumables shall be used only for the manufacture of DTP vaccines. 25 [11. ****] 12. If,- (a) the goods are imported,- (i) by a manufacturer of handicrafts; (ii) by a merchant exporter tied up with supporting manufacturer of handicrafts; or (iii) on behalf of the said manufacturer or merchant exporter by the Export Promotions Council for Handicrafts, for use in the manufacturer of handicrafts for export by the said manufacturers or as the case may be, the merchant exporter and the said manufacturers or as the case may be, merchant exporter is registered with the Export Promotion Council for Handicrafts; (b) the value of the goods imported does not exceed 5% of the FOB value of handicrafts exported during the preceding financial year; and (c) the importer produces a certificate from the Export Promotion Council for Handicrafts certifying the value of exports made during the financial year mentioned in clause (b) above and also the description, value and quantity of the item(s) already imported under this notification during the current financial year 13. If, imported for the manufacture of solar cells or solar cell modules. 14. If certified by the Ministry of Information and Broadcasting that the films and video cassettes are intended for archival study, or record and reference purposes. 15. If, the Central Board of Film Censors or, an officer not below the rank of a Director, All India Radio or Doordarshan, as the case may be, certifies that the said film is predominantly educational in character. 16. If certified by the Ministry of Defence that the film is predominantly educational in character and is meant for training of defence personnel. 17. If the importer produces a certificate of the Reference Standard and copies of documents to subtantiate that the organization or institution from where the Reference Standard has been imported is approved by the World Health Organisation or International Organisation for Standards. 18. If, imported for the manufacture of Copper - T contraceptives. 19. If,- (a) the pulp of wood is imported for the manufacture of newsprint, that is to say, paper intended for the printing of newspapers, books and periodicals; and (b) the newsprint manufactured in terms of (a) above is supplied to a newspaper. Explanation .- For the purpose of this condition, newspaper means a newspaper registered by the Registrar of Newspapers for India under the provisions of the Press and Registration of Books Act, 1867 (25 of 1867). 20. If,- (a) the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, that such imported goods will be used for the purpose specified and in the event of his failure to comply with this condition, he shall be liable to pay, in respect of such quantity of the said goods as is not proved to have been so used, an amount equal to the difference between the duty leviable on such quantity but for the exemption under this notification and that already paid at the time of importation; and (b) the importer produces to the said Deputy Commissioner or Assistant Commissioner, as the case may be, within six months or such extended period, as that Deputy Commissioner or Assistant Commissioner may allow, a certificate issued by the Deputy Commissioner of Central Excise or the Assistant Commissioner of Central Excise, as the case may be, in whose jurisdiction the said goods have been used in such unit, that the said goods have been so used. 2 [20A. If the importer, at the time of import,- Is an establishment registered with the Registrar of Newspapers, India (RNI). ] 21. If- 37 [ (a) the goods are imported (i) by a manufacturer of textile garments or leather garments; or (ii) by a merchant exporter tied up with supporting manufacturer of textile garments or leather garments, for use in the manufacture of textile garments or leather garments for export by that manufacturer directly or through a merchant exporter, as the case may be, and that the said manufacturer or merchant-exporter is registered with the Apparel Export Promotion Council or Council for Leather Exports, or as the case may be, Handloom Export Promotion Council: and (b) the entitlement certificate issued by respective export promotion councils shall carry the name of supporting manufacturers along with the name of the merchant- exporter in case the goods are exported by a merchant exporter. ; ] (b) the total value of goods imported shall not exceed 3 percent of the FOB value of textile garments (other than handloom garments) or leather garments, as the case may be, or 5 percent of the FOB value of handloom garments exported during the preceding financial year, however the value of lining and inter-lining materials imported shall not exceed 2 percent of the said FOB value; (c) the importer produces a certificate from the Apparel Export Promotion Council or Council for Leather Exports, as the case may be, or Handloom Export Promotion Council certifying the value of exports made during the financial year mentioned in clause (b) above, and also the value and quantity of goods already imported under this notification during the current financial year; (d) the importer produces a certificate from Apparel Export Promotion Council or Council for Leather Exports, as the case may be, or Handloom Export Promotion Council certifying that the lining and inter-lining materials shall not be put to any other use or sold in the market except in the manufacture of textile garments or leather garments; and (e) there is a doubt as to the useability of lining and interlining materials in relation to the export product, the Commissioner of Customs, for reasons to be recorded in writing, orders drawal of sample at the time of export to verify such use. 21A. If, - (a) The goods are imported by a manufacturer of leather footwear, or synthetic footwear, or other leather products, for use in the manufacture of the said goods, for export by that manufacturer and the said manufacturer is registered with the Council for Leather Exports; (b) The total value of goods imported shall not exceed 3 per cent of the FOB value of leather footwear or synthetic footwear or other leather products, exported during the preceding financial year; (c) The importer produces a certificate from the Council for Leather Exports certifying the value of exports made during the financial year mentioned in sub-condition (b), and also the value and quantity of goods already imported under this notification during the current financial year. 35 [21B . If, - (a) the goods are imported by a manufacturer of handloom made ups or cotton made ups or polyester made ups for use in the manufacture of said goods for export by that manufacturer and the said manufacturer is registered with the Handloom Export Promotion Council or Cotton Textile Export Promotion Council or Synthetic Rayon Textiles Export Promotion Council as the case may be; (b) the total value of goods imported shall not exceed 5 percent of the FOB Value of handloom made ups or 1 percent of the FOB value of cotton made ups or polyester made ups as the case may be, exported during the preceding financial year; (c) the importer produces a certificate from the Handloom Export Promotion Council or Cotton Textile Export Promotion Council or Synthetic Rayon Textiles Export Promotion Council certifying the value of exports made during the financial year mentioned in sub-condition (b), and also the value and quantity of goods already imported under this notification during the current financial year .] 21C. If, - (a) the total value of goods imported shall not exceed 1 percent of the FOB value of exports of carpets during the preceding financial year; (b) the importer produces a certificate from Carpet Export Promotion Council certifying the value of exports made during the preceding financial year, mentioned in condition (a), and also the value and quantity of goods already imported under this notification during the current financial year. 22. If at the time of importation, the importer,- (1) in all cases [excluding the case of the goods at item No. 9 of List 9 (B)], produces a valid registration-cum-membership certificate issued by the Council for Leather Exports sponsored by the Government of India in the Ministry of Commerce and Industry; and (2) furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that- (a) the imported goods shall be used in the leather industry, or as the case may be, for the manufacture of leather chemicals to be used in the leather industry; (b) he shall maintain an account of the imported goods, received and consumed in the place of manufacture for the above purpose, in the manner specified by the said Deputy Commissioner or the Assistant Commissioner; (c) he shall, within three months or such extended period as the said Deputy Commissioner or the Assistant Commissioner may allow, produce the extract of the aforesaid account, duly certified by the Deputy Commissioner of Central Excise or the Assistant Commissioner of Central Excise, as the case may be, having jurisdiction over the factory manufacturing the goods, to the effect that the said goods have been used for the aforesaid purpose; and (d) he shall pay, in the event of his failure to comply with the conditions above, an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation. 23. If the importer produces a certificate from an officer not below the rank of a Joint Director in the Ministry of Information Technology, Government of India, mentioning the technical specifications, description and quantity of the moulds, tools and dies and certifying that they are required for the manufacture of electronic parts and recommending grant of exemption. 24. If the said coins are imported with the approval of the Reserve Bank of India and are utilised for disbursement by the Scheduled bank in accordance with the regulations of the Reserve Bank of India, sanctioning foreign exchange for travellers. Explanation .- The expression Scheduled bank means the State Bank of India constituted under the State Bank of India Act, 1955 (23 of 1955), a subsidiary bank as defined in the State Bank of India (Subsidiary Banks) Act, 1959 (38 of 1959), a corresponding new bank constituted under section 3 of the Banking Companies (Acquisition and Transfer of Undertakings) Act, 1970 (5 of 1970) or any other bank, being a bank included in the Second Schedule to the Reserve Bank of India Act, 1934 (2 of 1934). 25. If, the horological raw materials are imported for the manufacture of parts of wrist watches (watches designed primarily to show the time of the day, with or without additional features), mechanical or quartz analog. 26. If the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, that the coin blanks shall be used only for the purpose of coining of coins in a Mint of the Government of India 27. Omitted 28. Omitted 28A. If,- (1) the dies for drawing metal, acquired in exchange, are imported within one year of the date of exportation of similar dies out of India for repairs; and (2) no drawback of duty has been paid on the occasion of their export. Explanation .- On the imports referred to in condition (1) above, the duty would be leviable as if the value of the said dies were equal to- (i) the aggregate of- (a) labour charges for such repair; (b) cost of materials used in such repair ; (c) any other charges paid by the importer for repair of such dies; and (ii) the insurance and freight charges, both ways. 28B. If,- (1) zinc metal is imported within one year of the date of export of zinc concentrate out of India; and (2) sufficient evidence exists to establish that the zinc metal, which is imported has in fact been obtained out of toll smelting or toll processing of zinc concentrate exported out of India. Explanation .- On the imports referred to in condition (1) above, the duty shall be leviable as if the value of the said metal were equal to the aggregate of - (i) the toll smelting or toll processing costs, as the case may be, that is to say,- (a) labour charges; (b) cost of materials (other than the cost of goods exported out of India) used in such toll smelting or toll processing; and (c) any other charges which are payable in connection with the toll smelting or toll processing abroad; and (ii) the insurance and freight charges, both ways. 29. If,- (a) the goods are imported by the Oil and Natural Gas Corporation or Oil India Limited (hereinafter referred to as the licensee ) or a sub-contractor of the licensee and in each case in connection with petroleum operations to be undertaken under petroleum exploration licenses or mining leases, as the case may be, issued or renewed after the 1st of April, 1999 and granted by the Government of India or any State Government on nomination basis; (b) where the importer is a licensee, he produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, the following, namely, a certificate from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the licences referred to in that clause, and (c) where the importer is a sub-contractor, he produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, the following, namely:- (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the licenses or mining leases, as the case may be, referred to in that clause and containing the name of such sub-contractor, (ii) an affidavit to the effect that such sub-contractor is a bona-fide sub-contractor of the licensee or lessee, as the case may be, (iii) an undertaking from such licensee or lessee, as the case may be, binding him to pay any duty, fine or penalty that may become payable, if any of the conditions of this notification are not complied with by such subcontractor or licensee or lessee, as the case may be, and (iv) a certificate, in the case of a petroleum exploration license or mining lease, as the case may be, issued or renewed after the 1st of April, 1999, by the Government of India or any State Government on nomination basis, that no foreign exchange remittance is made for the import of such goods undertaken by the sub-contractor on behalf of the licensee or lessee, as the case may be: Provided that nothing contained in this sub-clause shall apply if such subcontractor is an Indian Company or Companies. 30. If,- (a) the parts and raw materials are used in the manufacture of goods in accordance with the provisions of section 65 of the Customs Act, 1962 (52 of 1962); and (b) a certificate is produced in each case to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, from a duly authorized officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the goods are required for the purposes of off-shore oil exploration or exploitation. 31. If,- (a) the goods are imported by an Indian Company or Companies, a Foreign Company or Companies, or a consortium of an Indian Company or Companies and a Foreign Company or Companies (hereinafter referred to as the contractor ) or a sub-contractor of the contractor and in each case in connection with petroleum operations to be undertaken under a contract with the Government of India; (b) where the importer is a contractor, he produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, the following, namely:- (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the contract referred to in that clause, and (ii) a certificate, in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the imports of such goods undertaken by such Foreign Company or Companies; (c) where the importer is a sub-contractor, he produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, the following, namely:- (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the contract referred to in that clause and containing, the name of such sub-contractor, (ii) an affidavit to the effect that such sub-contractor is a bona-fide sub-contractor of the contractor, (iii) an undertaking from such contractor, binding him to pay any duty, fine or penalty that may become payable, if any of the conditions of this notification are not complied with, by such sub-contractor or contractor, as the case may be, and (iv) a certificate, in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the import of such goods undertaken by the sub-contractor on behalf of the Foreign Company or Companies: Provided that nothing contained in this sub-clause shall apply if such subcontractor is an Indian Company or Companies. 32. If,- (a) the goods are imported by an Indian Company or Companies, a Foreign Company or Companies, or a consortium of an Indian Company or Companies and a Foreign Company or Companies (hereinafter referred to as the contractor ) or a sub-contractor of such Company or Companies or such consortium and in each case in connection with petroleum operations or coal bed methane operations, as the case may be, to be undertaken under a contract signed with the Government of India, on or after the 1st day of April,1998, under the New Exploration Licensing Policy, or on or after the 1st day of April 2001 in terms of the Coal Bed Methane Policy, as the case may be; (b) where the importer is a contractor, he produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, the following, namely:- (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for such petroleum operations or coal bed methane operations, as the case may be, and have been imported under a contract signed under the New Exploration Licensing Policy or the Coal Bed Methane Policy, as the case may be; and (ii) a certificate, in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the imports of such goods undertaken by the Foreign Company or Companies; (c) where the importer is a sub-contractor, he produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, the following, namely:- (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations or coal bed methane operations, as the case may be, referred to in clause (a) and have been imported under a contract signed under the New Exploration Licensing Policy or the Coal Bed Methane Policy, as the case may be, and containing the name of such sub-contractor, (ii) an affidavit to the effect that such sub-contractor is a bona-fide sub-contractor of the contractor, (iii) an undertaking from such contractor, binding him to pay any duty, fine or penalty that may become payable, if any of the conditions of this notification are not complied with, by such sub-contractor or contractor, as the case may be; and (iv) a certificate, in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the import of such goods undertaken by the sub-contractor on behalf of the Foreign Company or Companies: Provided that nothing contained in this sub-clause shall apply if such subcontractor is an Indian Company or Companies. 33. Omitted 34. If the importer produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time and place of importation, a certificate issued by the Gem and Jewellery Export Promotion Council mentioning the technical specifications, description and quantity of the goods and certifying that the said goods are required for the setting up of a Training and Development Project by the importing institute and recommending the grant of exemption in each case. 35. If the importer at the time of importation,- (a) furnishes in all cases a certificate to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Non-Conventional Energy Sources recommending the grant of this exemption and in the case of the goods at (2) to (5), the said officer certifies that the goods are required for the specified purposes; and (b) furnishes an undertaking to the said Deputy Commissioner or Assistant Commissioner to the effect that,- (i) in the case of wind operated electricity generators upto 30 KW or wind operated battery chargers upto 30 KW, he shall not sell or otherwise dispose off, in any manner, such generators or chargers for a period of two years from the date of importation; (ii) in the case of other goods specified at (2) to (5), he shall use them for the specified purpose; and (iii) in case he fails to comply with sub-conditions (i) or (ii), or both conditions, as the case may be, he shall pay an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation. 4 [35A. If the importer at the time of importation,- (a) furnishes a certificate to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of New and Renewable Energy recommending the grant of this exemption and the said officer certifies that the goods are required for the specified purpose; and (b) furnishes an undertaking to the said Deputy Commissioner or Assistant Commissioner to the effect that,- (i) he shall use the goods for the specified purpose; and (ii) in case he fails to comply with sub-condition (i), he shall pay an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation. ] 36. If,- (a) the project for substitution of ozone depleting substances (ODS) or the project for setting up of new capacity with non-ODS technology has been approved by the Steering Committee set up in the Ministry of Environment and Forests for the clearance of such projects; and (b) the importer furnishes in each case a list of the goods required for the aforesaid projects, which is duly certified, to the effect that the goods mentioned in the said list are required for the aforesaid projects, by an officer not below the rank of a Deputy Secretary in the Ministry of Environment and Forests. 37. (1) If an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Fertilizers,- (i) certifies that the scheme for renovation or modernisation as the case may be, of the fertilizer plant has been granted techno-economic clearance by the said Department; (ii) recommends, in each case, the grant of exemption under this notification to,- (a) Machinery, instruments, apparatus and appliances, as well as components (whether finished or not) or raw materials for the manufacture of aforesaid items and their components, required for renovation or modernisation of a fertilizer plant; and (b) spare parts, other raw materials (including semi-finished material) or consumable stores, essential for maintenance of the fertilizer plant mentioned above (hereinafter referred to as the said goods) for such scheme; and (iii) certifies in each case, that the said goods are, or will be, required for the purposes specified above; (2) the value of import of the goods specified in sub-clause (b) of clause (ii) of sub-condition (1) shall not exceed 10% of the value of imported goods specified in sub-clause (a) of the said clause; (3) if the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the said goods shall be used for the purposes specified above and in the event of his failure to use the goods for such purposes, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 38. Omitted 39. If, at the time of importation, the importer produces a certificate, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Environment and Forests, to the effect that the imported kits or parts thereof are required for the conversion of motor-spirit or diesel driven vehicles into Compressed Natural Gas driven vehicles, or Propane driven vehicles, or Liquefied Petroleum Gas driven vehicles, as the case may be. 40. If, (a) the goods are imported by- (i) the Ministry of Surface Transport, or (ii) a person who has been awarded a contract for the construction of roads in India by or on behalf of the Ministry of Surface Transport, by the National Highway Authority of India, by the Public Works Department of a State Government or by a road construction corporation under the control of the Government of a State or Union Territory; or (iii) a person who has been named as a sub-contractor in the contract referred to in (ii) above for the construction of roads in India by or on behalf of the Ministry of Surface Transport, by the National Highway Authority of India, by Public Works Department of a State Government or by a road construction corporation under the control of the Government of a State or Union Territory; 26 [(b) the importer, at the time of importation, furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that he shall use the imported goods exclusively for the construction of roads and that he shall not sell or otherwise dispose of the said goods, in any manner, for a period of five years from the date of their importation: Provided that the said Deputy Commissioner of Customs or the Assistant Commissioner of Customs, may allow the importer to sell or dispose of any of the imported goods on payment of customs duties at the rates applicable at the time of import but for this exemption, on the depreciated value of the goods to be calculated @ 5% on straight line method for each completed quarter starting from the date of importation of the said goods till the date of their sale subject to the condition that the concerned Ministry Authority, Department or Corporation referred to in condition (a) above certifies that said goods in the project, for which duty free import was allowed, are no longer required for the project. ] (c) in case of goods of serial no.12 and 13 of List 18, the importer, at the time of importation of such goods, also produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Surface Transport (Roads Wing), or an officer not below the rank of Chief Engineer of the National Highways Authority of India, to the effect that the imported goods are required for construction of roads in India. 41. Omitted 41A. Omitted 42. Omitted 43. Omitted 44. Omitted 45. If,- (i) in the case of a power plant (except a nuclear power plant),- (a) in the case of Central Power Sector Undertakings, the Chairman of the concerned Undertaking or an officer authorized by him certifies that the scheme for renovation or modernisation as the case may be, of such power plant, has been approved and an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Power recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; (b) in other cases, an officer not below the rank of the Chief Engineer of the concerned State Electricity Board or State Power Utility certifies that the scheme for renovation or modernisation, as the case may be, of such power plant, has been approved and an officer not below the rank of a Secretary in the State Government concerned dealing with the subject of power or electricity recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; (ii) in the case of nuclear power plant, an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Atomic Energy certifies the scheme for renovation or modernisation as the case may be, of such power plant, has been approved and recommends the grant of the aforesaid exemption to the goods for such scheme; and (iii) in all cases, the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the said goods shall be used for the purpose specified above and in the event of his failure to use the goods for the renovation or modernisation of the said power generation plant, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 46. If,- (a) in the case of small hydel power generation plants upto 3 MW station capacity, an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Non-Conventional Energy Sources certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said hydel power generation plant and recommends the grant of this exemption to the imported goods; (b) in the case of nuclear power generation plant, an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Atomic Energy certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said power generation plant and recommends the grant of this exemption to the imported goods; (c) in the case of power generation plants (except those specified above),- (i) in the case of Central Power Sector Undertakings, the Chairman of the concerned Undertaking or an officer authorized by him certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said power generation plant and an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Power recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; (ii) in other cases, an officer not below the rank of the Chief Engineer of the concerned State Electricity Board or State Power Utility certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said power generation plant and an officer not below the rank of a Secretary in the State Government concerned dealing with the subject of power or electricity recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; and (iii) in all cases, the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the imported goods shall be used for the purpose specified above and in the event of his failure to use the goods for the purpose specified, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 47. If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing basic telephone service, cellular mobile telephone service, value added services via V-SAT system or Internet Service 48. If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing radio paging service. 49. If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing Public Mobile Radio Trunked Service (PMRTS). 50. Omitted 51. (i) If the importer produces a certificate from an officer not below the rank of a Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting to the effect that the importer is an accredited press cameraman, and that the importer has not availed, on any occasion in the previous two years, exemption under this notification or the notification of the Government of India in the Ministry of Finance (Department of Revenue), No.16/2000-Customs, dated the 1st March, 2000 or No.17/2001-Customs, dated the 1st March, 2001; (ii) the exemption under this notification shall be applicable to that portion of C.I.F. value of the specified cameras, lenses and other goods, which does not exceed one lakh rupees; and (iii) if the importer gives an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time and place of importation to the effect that the said goods shall remain in his possession, control and use and shall not be sold or parted with for a period of two years from the date of importation. 52. (i) If the importer produces a certificate from an officer not below the rank of a Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting to the effect that the importer is an accredited journalist, and that the importer has not availed, on any occasion in the previous two years, exemption under this notification or the notification of the Government of India in the Ministry of Finance (Department of Revenue), No. 16/2000-Customs, dated the 1 st March, 2000 or No.17/2001-Customs, dated the 1st March, 2001; (ii) the exemption under this notification shall be applicable to that portion of C.I.F. value of the specified personal computers, typewriters and fax machines, which does not exceed one lakh rupees; and (iii) if the importer gives an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time and place of importation to the effect that the said goods shall remain in his possession, control and use and shall not be sold or parted with for a period of two years from the date of importation. 53. (i) If, - (a) the goods are imported for Research and Development purposes; (b) the imported goods are installed in the said Research and Development Wing of the importer within six months from the date of importation and certificate from the jurisdictional Assistant Commissioner of Central Excise or the Deputy Commissioner of Central Excise, as the case may be for the units registered with the Central Excise, and from an independent Chartered Engineer, for the units not registered with the Central Excise, is produced before the Assistant Commissioner of Customs or the Deputy Commissioner of Customs, as the case may be, at the Port of importation; and (c) the goods imported are not transferred or sold for a period of seven years from the date of installation; (ii) If, - (a) the goods are imported for use in the manufacture of commodities; (b) the total value of goods imported does not exceed 25 per cent. of the FOB value of exports made during the preceding financial year; (c) the importer produces a certificate from the Joint Director General of Foreign Trade in the Ministry of Commerce of the Government of India, certifying the value of exports made during the financial year mentioned in clause (b) above, and also the value and quantity of goods already imported under this notification during the current financial year; (d) the imported goods are installed in the factory of the importer within six months from the date of importation and certificate from the jurisdictional Assistant Commissioner of Central Excise or the Deputy Commissioner of Central Excise, as the case may be for the units registered with the Central Excise and from an independent Chartered Engineer, for the units not registered with the Central Excise, is produced before the Assistant Commissioner of Customs or the Deputy Commissioner of Customs, as the case may be, at the Port of importation; (e) the goods imported are not transferred or sold for a period of 7 years from the date of installation. 53A. If, - (a) the goods are imported for Research and Development purpose; (b) the total value of goods imported does not exceed one percent of the FOB value of exports made during the preceding financial year; (c) the importer produces a certificate from the Joint Director General of Foreign Trade in the Ministry of Commerce of the Government of India, certifying the value of exports made during the financial year mentioned in clause (b) above, and also the value and quantity of goods already imported under this notification during the current financial year; (d) the imported goods are installed in the said Research and Development wing of the importer within six months from the date of importation and certificate from the jurisdictional Assistant Commissioner of Central Excise or Deputy Commissioner of Central Excise, as the case may be for the units registered with the Central Excise and from an independent Chartered Engineer, for the units not registered with the Central Excise, is produced before the Assistant Commissioner of Customs or Deputy Commissioner of Customs, as the case may be, at the port of importation; (e) the goods imported are not transferred or sold for a period of 7 years from the date of installation. 54. If,- (A) imported by a State Fisheries Corporation or any Fisheries Co-operative Federation recogonised by the State Government; or (B) imported by a person other than a State Fisheries Corporation or any Fisheries Co-operative Federation recogonised by the State Government concerned,- (i) the importer produces a certificate, from an officer not below the rank of a Deputy Secretary of the Department concerned with fisheries in the State Government, to the effect that the spares are being imported with outboard motors meant for fitment to boats which are exclusively used for fishing operations and that such spares are for the purpose of maintenance of the said outboard motors and recommending the grant of the concession; and (ii) the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation to the effect that - (a) the said spares shall be used for the purpose specified above; and (b) he shall pay on demand in the event of his failure to comply with (a) above an amount equal to the difference between the duty leviable on the said spares but for the exemption under this notification and that already paid at the time of importation. 55. Omitted 56. If,- (1) the spinnerettes acquired in exchange, are imported, within one year of the date of exportation of spinnerettes out of India; and (2) no drawback of duty has been paid on the occasion of their export. Explanation .- On the imports referred to in condition (1) above, the duty would be leviable as if the value of the said spinnerettes were equal to - (i) the cost of such exchange, that is to say, the aggregate of - (a) labour charges; (b) price charged for that quantity of gold, platinum and rhodium, if any, which is in excess of the respective quantity of gold, platinum or rhodium contained in the said spinnerettes exported out of India; and (c) any other charges paid by the importer to the supplier of such spinnerettes for such exchange of spinnerettes; and (ii) the insurance and freight charges, both ways. 57. If, - (1) the bushings acquired in exchange, are imported, within one year of the date of exportation of bushings out of India; and (2) no drawback of duty has been paid on the occasion of their export. Explanation .- On the imports referred to in condition (1) above, the duty would be leviable as if the value of the said bushings were equal to- (i) the cost of such exchange, that is to say, the aggregate of- (a) labour charges; (b) price charged for that quantity of platinum and rhodium, if any, which is in excess of the respective quantity of the platinum and rhodium contained in the said bushings exported out of India; and (c) any other charges paid by the importer to the supplier of such bushings for such exchange of bushings; and (ii) the insurance and freight charges, both ways. 58. If an accredited representative of the foreign film unit or the television team executes a bond in such form and with such surety as may be acceptable to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, binding himself to pay on demand an amount equal to the duty leviable on such equipment and cameras if the same are not placed under customs control for re-export within a period of three months or such extended period as the said Deputy Commissioner or the Assistant Commissioner may permit, after clearance for home consumption. 59. If, - (a) the duties of customs leviable on the specified equipment, raw films and tapes had been paid at the time of their first importation into India; (b) no drawback of duty was paid on their exportation from India; (c) the identity of the goods is established to the satisfaction of the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of availing of this concession; (d) the goods are reimported into India within six months or such period not exceeding one year from the date of their export from India, as may be extended by the said Deputy Commissioner or the Assistant Commissioner on sufficient cause being shown to his satisfaction; and (e) the External Publicity Division of the Ministry of External Affairs certifies that the purpose for which the goods had been exported from India was in public interest and had been sponsored or approved by the Government of India. 60. If, - (a) the total C.I.F. value of the wireless apparatus, accessories and parts, imported under this notification does not exceed seventy-five thousand rupees; (b) the total value of the parts imported under this exemption does not exceed Rs.1,000; (c) the importer, i.e. the Licensed amateur radio operator, at the time of clearance, produces a certificate from an officer not below the rank of an Assistant Wireless Adviser to the Government of India in the Ministry of Communications to the effect that the wireless apparatus, accessories and parts in respect of which this exemption is claimed are within the value limit specified above, and also recommending the grant of this exemption. Explanation .- Licensed amateur radio operator means a person duly authorised under the Indian Wireless Telegraphs (Amateur Service) Rules, 1978, made under sections 4 and 7 of the Indian Telegraph Act, 1885 (13 of 1885). 61. Omitted 62. If the importer, at the time of importation furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that,- (a) the imported goods shall be used for the specified purposes and shall not be sold or otherwise disposed of in any manner for a period of at least two years from the date of importation; and (b) in the event of failure to comply with (a) above, he shall be liable to pay an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation. 63. If,- (1) the goods are imported for being tested in - (a) Defence Research and Development Organisation (DRDO) laboratories; (b) Indian Institutes of Technology; (c) Council for Scientific and Industrial Research (CSIR) laboratories; (d) Central Power Research Institute, Bangalore; or (e) Any other test centre approved by any Ministry in the Government of India for this purpose; and (2) the Head of the organisation certifies that the goods have been imported by that organisation only for the purpose of testing and shall not be used or sold after such testing. 64. If, - (a) the goods are imported by a newspaper establishment registered with the Registrar of Newspapers for India appointed under section 19A of the Press and Registration of Books Act, 1867 (25 of 1867); and (b) the importer at the time of import produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, - (1) a certificate issued by the Registrar of Newspapers for India recommending the grant of exemption under this notification; and (2) an undertaking to the effect that the imported goods shall remain in his possession, control and use and shall not be sold or parted with for a period of five years from the date of importation and in case the said goods are sold thereafter, the sale shall be subject to the permission granted by the Registrar of Newspapers for India. 65. Omitted 66. If the importer, at the time and place of clearance,- (a) produces a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Human Resource Development, Department of Education, to the effect that the imported recorded magnetic tapes and floppy diskettes are recorded with educational or scientific material for use in computers and are required by Institutes or Research Centres duly approved by the University Grants Commission; (b) gives an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that such imported goods shall not be- (i) used for any other purpose and shall not be subsequently recorded with any other material; and (ii) sold or parted with, without the prior permission of the Commissioner of Customs of the port of importation. 67. If the parts are required for manufacture or servicing of aeroplanes, gliders, helicopters or simulators of aircraft. Explanation .- Parts of aeroplanes, gliders, helicopters or simulators of aircraft shall include engines, engine parts, wireless transmission apparatus, wireless receivers, iron and steel washers and screws, ball and roller bearings and other parts. 68. If an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Civil Aviation certifies in each case the description and quantity of such raw materials which are required for the manufacture or servicing of the specified aircraft or parts of such aircraft, as the case may be. 69. If the importer, at the time of import,- (i) produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Space certifying that the said satellite and pay-loads are for launch into outer space in conformity with the provisions of the Outer Space Treaty of 1967; (ii) produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Space certifying that the goods covered under item (ii) of column (3) of S.No.349 of the Table, are required for launch vehicles and satellites and payloads; and (iii) gives an undertaking to the effect that the ground equipment, covered under item (iii) of column (3) of S.No.349 of the Table, imported for testing the satellites or pay-loads shall be re-exported within a period of six months from the date of their importation or such extended period as the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, may allow, and in the event of failure to comply with the same, he shall pay on demand an amount equal to the difference between the duty leviable on such goods but for the exemption under this notification and that already paid at the time of importation. 70. If,- (a) the importer makes a declaration at the time of import that the barges would be re-exported; (b) the barges are re-exported, by the same ship which brought them or by any other ship under the same shipping agency, within two months of the date of importation or such extended period as the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, may allow; and (c) the importer executes a bond, in such form and for such sum as may be specified by the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, binding himself to pay that sum if the re-export does not take place within the period specified under condition (b) above. 71. If,- (a) the importer maintains a proper account of import, use and consumption of the specified goods imported for the purpose of repairs of ocean-going vessels and submits such account periodically to the Commissioner of Customs in such form and in such manner as may be specified by the said Commissioner; (b) the importer, by the execution of bond, in such form and for such sum as may be specified by the said Commissioner, binds himself to pay on demand an amount equal to the duty leviable,- (i) on the capital goods or spares thereof or material handling equipment, as are not proved to the satisfaction of the said Commissioner to have been installed or otherwise used for the aforesaid purpose; (ii) on parts, raw material and consumables, as are not proved to the satisfaction of the said Commissioner to have been used or consumed for the aforesaid purpose, with in a period of three months from the date of importation there of or within such extended period as that Commissioner, on being satisfied that there is sufficient cause for not installing, using or consuming them, as the case may be, for the aforesaid purpose within the said period, allow. Explanation . - Ocean going vessels includes- (a) liners; cargo-vessel of various kinds including refrigerator vessels for the transport of meat, fruit or the like, vessels specified for the transport of particular goods (grain, coal, ores or the like) ; tankers (petrol, wine or the like); yachts and other sailing vessels; cable ships; ice-breakers; floating factories of all kinds (for processing whales, preserving fish or the like) whale catchers; trawlers and other fishing vessels; life boats, scientific research vessels; weather ships; vessels for the transportation or mooring of buoys; pilot-boats; hopper barges for the disposal of dredged material or the like; (b) war ships of all kinds including submarines; (c) tugs, dredgers, fire- floats and salvage ships; and (d) oil rigs, drilling ships and jack-up rigs. 72. If the vessels and other floating structures are intended to be broken up after their importation, the importer shall present a fresh bill of entry to the Commissioner of Customs, and thereupon such goods shall be chargeable with the duty which would be payable on such goods as if they were entered for home consumption, under section 46 of the Customs Act, 1962 (52 of 1962), on the date of the presentation of such fresh bill of entry, for the purposes of break-up of such goods. 73. If any of the goods manufactured from the imported raw materials and parts are subsequently intended to be broken up, a fresh bill of entry in respect of such manufactured goods shall be presented to the Commissioner of Customs and thereupon these goods shall be chargeable with the duty which would be payable as if such manufactured goods had been imported and entered for home consumption, under section 46 of the Customs Act, 1962 (52 of 1962), on the date of the presentation of such fresh bill of entry, for the purposes of break-up of such manufactured goods. 74. If,- (a) imported by any Department or Ministry of the Government of India; and (b) the importer produces a certificate from an officer not below the rank of a Joint Secretary to the Government of India in the concerned Department or Ministry, certifying that the said goods are being imported under an agreement relating to Government to Government Assistance Programme with any other country. 75. Omitted 76. If, at the time of importation, the importer produces a certificate, from an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Science and Technology or an officer not below the rank of a Joint Secretary to the concerned State Government in the Department of Science and Technology to the effect that imported equipment, parts or accessories are required for initial setting up, repair or maintenance of a planetarium. 77. If,- (a) the hospital is run by - (1) the Central Government, a State Government, a Union Territory Administration or a Local Authority; or (2) institutions established by or under any law for the time being in force; or (3) societies registered under any law for the time being in force relating to registration of societies, such societies being controlled by any of the authorities mentioned in (1) above; (b) the importer produces a certificate, from the Directorate General of Health Services of the Government of India or the Ministry of Health and Family Welfare in the Government of India, or from the State Government, the Union Terrritory Administration or the Local Authority running or controlling that hospital, as the case may be, to the effect that the said hospital falls in any of the categories specified at (a) above; and (c) the head of the hospital certifies in each case that the hospital equipment is meant for use in the hospital and is essential for running or maintenance of the hospital. Explanation .- Hospital includes any Institution, Centre, Trust, Society, Association, Laboratory, Clinic and Maternity Home, which renders medical, surgical or diagnostic treatment 78. If the importer at the time of importation, - (a) produces a certificate from the Director General or Deputy Director General or Assistant Director General, Health Services, New Delhi, in each case, in the Form below; or (b) furnishes an undertaking acceptable to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the aforesaid certificate shall be produced before the said Deputy Commissioner or the Assistant Commissioner within the period specified by the said Deputy Commissioner or the Assistant Commissioner, failing which he would pay the duty leviable thereon. FORM Certificate No.... . of ... .. (year) Certified that the medical equipment / accessory / spare part ........................ (name to be specified) being imported by ................ is a life saving medical equipment, accessory or spare part and exemption from payment of customs duty is recommended. Signature with date of Director General / Deputy Director General / Assistant Director General, Health Services, New Delhi 79. Omited 80. Omitted 81. If,- (a) where the importer is the Government of India or a person authorised by that Government, or the goods are shipped on the order of a Department of that Government and are appropriated under such order at the time of shipment, for use in anti-smuggling operations, he produces, at the time of importation, a certificate from the Under Secretary to the Government of India in the Department of Revenue to the effect that the said goods are intended for the aforesaid use; (b) where the importer is a Police Force of a State or a Union Territory or the Central Reserve Police Force, the National Security Guard or the Special Protection Group and the said goods are imported for bomb detection or disposal purposes, he produces, at the time of importation, a certificate from an officer in the Ministry of Home Affairs not below the rank of an Under Secretary to the Government of India to the effect that the said goods are intended for the aforesaid use. 82. If the goods are imported by the Sports Authority of India or a National or State level Sports Federation or Association recognised by the Central Government or a State Government or a Union Territory Administration, as the case may be. 83. If,- (a) the synthetic tracks and artificial surfaces and equipment required for their installation are imported under the Scheme for Laying Synthetic Tracks and Artificial Surfaces of the Department of Youth Affairs and Sports, Government of India; (b) the importer, at the time of import - (1) produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the said Department certifying that the import of the said tracks and surfaces is under the Scheme for Laying Synthetic Tracks and Artificial Surfaces and also recommending the grant of the exemption; and (2) gives an undertaking to the effect that the equipment imported for installation of the said tracks and surfaces shall be re-exported within a period of six months from the date of importation, and in the event of failure to comply with the same he shall pay on demand an amount equal to the difference between the duty leviable on such goods but for the exemption under this notification and that already paid at the time of importation. 84. If,- (a) the goods are imported into India by a National Sports Federation, under a certificate issued by the Sports Authority of India or imported by the Sports Authority of India, for use in a national or international championship or competition, to be held in India or abroad; and (b) the importer, at the time of clearance of the goods, produces a certificate to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, from an officer not below the rank of a Director in the Sports Authority of India certifying - (i) the name and address of the importer of the goods and the description, quantity and value of the goods, and (ii) that the goods are required for the purpose specified at (a) above. 85. If certified by the apex body in relation to the concerned game or sport (i.e the highest organisation, other than Government, by which the game or sport is controlled or regulated), or the Sports Authority of the concerned State, that the requisites for games and sports are required to be used in a national or international championship or competition to be held in India or abroad. 86. (a) If an officer not below the rank of a Joint Secretary to the Government of India in the Ministry of Power certifies that- (i) the power purchasing State has constituted the Regulatory Commission with full powers to fix tariffs; 33 [(ii) the power purchasing states shall undertake to carry out distribution reforms as laid down by Ministry of Power. ] 47 [(aa) In case of imports for a project for which the certificate regarding Mega Power Project status issued by an officer not below the rank of Joint Secretary to the Government of India in the Ministry of Power is provisional, the importer furnishes a security in the form of a Fixed Deposit Receipt from any Scheduled Bank for a term of thirty six months or more in the name of the President of India for an amount equal to the duty of customs payable on such imports but for this exemption, to the Deputy Commissioner of Customs or Assistant Commissioner of Customs, as the case may be, at the time of importation and if the importer fails to furnish the final Mega Power status certificate within a period of thirty six months from the date of importation, the said security shall be appropriated towards duty of customs payable on such imports but for this exemption.] (b) In the case of imports by a Central Public Sector Undertaking, the quantity, total value, description and specifications of the imported goods are certified by the Chairman and Managing Director of the said Central Public Sector Undertaking; and (c) In the case of imports by a Private Sector Project, the quantity, total value, description and specifications of the imported goods are certified by the Chief Executive Officer of such project. 87. (a) In the case of imports by the constituent units of the Department of Atomic Energy, the quantity, total value, description and specifications of the imported goods are certified by an officer not below, the rank of a Joint Secretary to the Government of India in the Department of Atomic Energy. (b) In the case of imports by a Central Public Sector Undertaking, the quantity, total value, description and specifications of the imported goods are certified by the Chairman and Managing Director of the said Central Public Sector Undertaking; 88. If a certificate from the Indian Mission concerned, about the ownership of the goods by the deceased person, is produced at the time of clearance of the goods through Customs station. 89. If the imported goods are meant to be exhibited in a museum managed by - (a) the Archaeological Survey of India, such goods shall be imported under cover of a certificate issued by the Director General of Archaeology in India; or (b) a State Government, such goods shall be imported under cover of a certificate issued by the concerned Authority in the concerned State Government. 90. If, at the time of importation, the importer produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from the Licensing Authority to the effect that specified quantity of such drugs and materials are required for being used in a clinical trial for which permission has been granted by the Licensing Authority under the provisions of the Drugs and Cosmetics Rules, 1945. 91. If,- (i) (a) in the case of Central Power Sector Undertakings, the Chairman of the concerned Undertaking or an officer authorized by him certifies that the power transmission project has been approved and an officer not below the rank of the Deputy Secretary to the Government of India in the Ministry of Power recommends, in each case, the grant of the aforesaid exemption to the goods for such project; (b) in other cases, an officer not below the rank of the Chief Engineer of the concerned Power Transmission Board or Corporation in a State certifies that such power transmission project has been approved and an officer not below the rank of the Secretary in a State Government concerned dealing with the subject of power or electricity recommends, in each case, the grant of the aforesaid exemption to the goods for such project; (ii) in all cases, the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the said goods shall be used for the purpose specified above and in the event of his failure to use the goods for power transmission, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 92. If, at the time of importation, the importer produces to the Deputy Commissioner of Customs or Assistant Commissioner of Customs, as the case may be, a certificate from the Chairman or the Managing Director or the Director (Rolling Stock, Electrical and Signaling) or the Director (Finance) of the Delhi Metro Rail Corporation Ltd., to the effect that - (i) the goods are procured by or on behalf of the Delhi Metro Rail Corporation Ltd. for use in the Delhi MRTS Project Phase-I and specified corridors of Delhi MRTS Project Phase-II; and (ii) the goods are part of the inventory maintained by the Delhi Metro Rail Corporation Ltd. and shall be finally owned by the Delhi Metro Rail Corporation Ltd. 93. If the importer produces a certificate from an officer not below the rank of a Joint Secretary to the Government of India in the Ministry of Home Affairs that the imported goods are required for call interception and monitoring, to be used by authorized security agencies. 94. Omitted 95. Omitted 96. If,- (a) the importer furnishes a certificate from an officer not below the rank of Deputy Secretary to the Government of India in the Department of Industrial Policy and Promotion in the Ministry of Commerce and Industry to the effect that goods being imported are required for effluent treatment plant for leather industry or handloom sector or handicraft sector, as the case may be. 97. If at the time of importation, the importer produces a certificate from an officer, not below the rank of Director in the Marine Products Export Development Authority, in the Ministry of Commerce and Industry, Government of India, to the effect that the imported goods constitute monofilament long line system for tuna fishing and are intended to be used for tuna fishing. 98. If, - (a) the goods are imported by an exporter of sea-food products for use in processing sea-food products for export and the said exporter is registered with the Marine Products Export Development Authority; (b) the total value of the goods imported shall not exceed 1% of the FOB value of exports of sea-food products exported during the preceding financial year; and (c) the importer produces a certificate from the Marine Products Export Development Authority, certifying the value of exports made during the financial year referred to in clause (b) above, and also the value of quantity of goods already imported under this notification during the current financial year. 99. The LNG facility is cerfied by an officer not below the rank of Joint Secretary to the Government of India in the Ministry of Power as being an integral part of the said power project of M/s. Ratnagiri Gas and Power Private Limited at Dabhol. 100. If the importer, at the time of import, produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Heavy Industries and Public Enterprises (Department of Heavy Industry), certifying that the imported goods (having regard to their description, quantity and technical specifications) are intended for use in the National Automotive Testing and Research and Development Infrastructure Project (NATRIP). 101. If, - (i) imported by an operator or on behalf of the operator, for operating scheduled air transport service or scheduled air cargo service, and such aircraft is used for operating the scheduled air transport service or the scheduled air cargo service, as the case may be; or (ii) the said aircraft is not registered or not intended to be registered in India, and brought into India for the purpose of a flight to or across India, and which is intended to be removed from India within six months from the date of entry. Explanation .- For the purposes of this entry, (a) operator means a person, organisation or enterprise engaged in or offering to engage in aircraft operation; (b) scheduled air transport service means an air transport service undertaken between the same two or more places and operated according to a published time table or with flights so regular or frequent that they constitute a recognizably systematic series, each flight being open to use by members of the public; and (c) scheduled air cargo service means air transportation of cargo or mail on a scheduled basis according to a published time table or with flights so regular or frequent that they constitute a recognizably systematic series, not open to use by passengers. 102. If, - (i) imported for servicing, repair or maintenance of aircraft, which is used for operating scheduled air transport service or the scheduled air cargo service, as the case may be; or (ii) the parts are brought into India for servicing, repair or maintenance of an aircraft mentioned in clause (ii) of Condition No.101. Explanation .- The expressions scheduled air transport service and scheduled air cargo service shall have the meanings respectively assigned to them in Condition No.101. 103. .(a) Importer shall- (i) furnish an undertaking to the Assistant Commissioner of Customs or Deputy Commissioner of Customs, as the case may be, to pay the duty leviable on liquefied natural gas (hereinafter referred to as LNG) imported in case he fails to produce within 3 months from the date of import a receipt from Ratnagiri Gas and Power Private Limited (hereinafter referred to as RGPPL) for having received the LNG so imported; (ii) furnish a copy of the undertaking given by RGPPL [as per clause (b)(vi) given below] to the jurisdictional Assistant Commissioner of Central Excise or Deputy Commissioner of Central Excise, along with a copy of agreement under which he intends to import and supply LNG to RGPPL; (iii) pay the full customs duty along with interest at the rate of 13% from the date of import till the date of payment on LNG imported and not so supplied to RGPPL; (b) Ratnagiri Gas and Power Private Limited shall- (i) register with the Assistant Commissioner of Central Excise or Deputy Commissioner of Central Excise having jurisdiction over their plant as if they were manufacturers of excisable goods; (ii) furnish a copy of the agreement signed with the importer for import and supply of LNG; (iii) undertake to maintain account for receipt of LNG, imported and supplied by the said importer, and consumption of the same for use in the generation of power at their Dabhol plant; (iv) furnish a copy of the bill of entry for LNG imported for supply to them; (v) submit a quarterly statement indicating opening stock, receipt of the imported LNG, consumption, closing stock and quantity not used for intended purpose, if any, value and customs duty payable; (vi) furnish an undertaking to the jurisdictional Assistant Commissioner of Central Excise or Deputy Commissioner of Central Excise to pay custom duty leviable on LNG so imported and not used for generation of power at their power project at Dabhol; (vii) pay customs duty so payable latest by the 10th day of the following quarter, along with interest at the rate of 13% from the date of import till the date of payment. 103A. If,- (a) the aircraft is imported by:- (i) the Aero Club of India, New Delhi, recognized as a National Sports Federation by Ministry of Youth Affairs and Sports, Government of India; or (ii) a Flying Training Institute approved by the competent authority in the Ministry of Civil Aviation; and (b) the importer has been granted approval by the competent authority in the Ministry of Civil Aviation to import aircraft for use in imparting training; and (c) the importer furnishes an undertaking to the Deputy Commissioner of Customs or Assistant Commissioner of Customs, as the case may be, at the time of importation that:- a. the said aircraft shall be used for the specified purpose only and he shall pay on demand, in the event of his failure to use the imported aircraft for the specified purpose, an amount equal to the duty payable on the said aircraft but for the exemption under this notification; b. the aircraft imported under this concession shall not be sold/transferred to an entity other than a flying training institute approved by the Directorate General of Civil Aviation. 29 [(d) the aircraft is imported by the Airports Authority of India for flight calibration purposes and at the time of importation, the Airports Authority of India furnishes an undertaking to the Deputy Commissioner of Customs or Assistant Commissioner of Customs, as the case may be, that :- a. the said aircraft shall be used for flight calibration purposes only and in the event of their failure to use the imported aircraft for the specified purpose, they shall pay, on demand, an amount equal to the duty payable on the said aircraft but for the exemption under this notification; and b. the said aircraft shall not be sold or transferred to any other entity. ] 38 [104. (i) the aircraft are imported by an operator who has been granted approval by the competent authority in the Ministry of Civil Aviation to import aircraft for providing non-scheduled (passenger) or non-scheduled (charter) services; (ii) the importer is a dedicated company or partnership firm for the non scheduled services; and (iii) the importer furnishes an undertaking to the Deputy Commissioner of Customs or Assistant Commissioner of Customs, as the case may be, at the time of importation that:- a. the said aircraft shall be used only for providing non- scheduled (passenger) services or non-scheduled (charter) services; and b. he shall pay on demand, in the event of his failure to use the imported aircraft for the specified purposes, an amount equal to the duty payable on the said aircraft but for the exemption under this notification. Explanation.-1. for the purposes of this entry,- (a) Operator means a person, organization, or enterprise engaged in or offering to engage in aircraft operation; (b) non-scheduled (passenger) services means air transport services other than Scheduled (passenger) air transport services as defined in rule 3 of the Aircraft Rules 1937. (c) non-scheduled (charter) services mean services provided by a non-scheduled (charter) air transport operator , for charter or hire of an aircraft to any person, with published tariff, and who is registered with and approved by Directorate General of Civil Aviation for such purposes, and who conforms to the civil aviation requirement under the provision of rule 133A of the Aircraft Rules 1937: 2. For the purposes of this exemption, use of such imported aircraft by a non-scheduled (passenger) operator for non-scheduled (charter) services or by a non-scheduled (charter) operator for non-scheduled (passenger) services, shall not be construed to be a violation of the conditions of import at concessional rate of duty. ] 105. If,- (i) imported for servicing, repair or maintenance of aircraft imported or procured by Aero Club of India; or (ii) imported for servicing, repair or maintenance of aircraft, which are used for flying training purposes or for operating non-scheduled (passenger) service or non-scheduled (charter) services; 30 [(iia) imported for servicing, repair or maintenance of aircraft imported or procured by the Airports Authority of India for flight calibration purposes ] (iii) the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation that:- a. the imported goods shall be used for the specified purpose only; and b. he shall pay on demand, in the event of his failure to use the imported goods for the specified purpose, an amount equal to the duty payable on the said goods but for the exemption under this notification. Explanation .- The expressions , Aero Club of India , operator , non-scheduled (passenger) services and non-scheduled (charter) services shall have the meanings respectively assigned to them in Condition No. 103 or 104 above. 106. If,- (a) the goods are imported by a manufacturer, for use in the manufacture of sports goods for export by that manufacturer and the manufacturer is registered with the 'Sports Goods Export Promotion Council'; (b) the total value of specified goods imported in a year shall not exceed 3 per cent. Of the FOB value of sports goods exported by the manufacturer during the preceding financial year; (c) the importer produces a certificate from the 'Sports Goods Export Promotion Council' certifying the value and quantity of exports made during the preceding financial year mentioned in sub-condition (b); and also the value and quantity of goods already imported under this notification during the current financial year. 27 [107. If, at the time of importation, the importer produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from an officer not below the rank of Joint Secretary to the Government of India in the Ministry of Power to the effect that the said goods are required for the specified purpose. 108. The exemption shall be available subject to the condition that remittances are made or required to be made by the importer relating to the import of the said goods. ] 39 [109. If,- (a) the goods are directly shipped from the country in which they were produced and each bar has a weight of 5 kg. or above; (b) the goods are imported in accordance with the packing list issued by the mining company by whom they were produced; (c) the importer produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, an assay certificate issued by the mining company or the laboratory attached to it, giving detailed precious metal content in the dore bar; (d) the gold dore bars are imported by the actual user for the purpose of refining and manufacture of standard gold bars of purity 99.5% and above; and (e) the silver dore bars are imported by the actual user for the purpose of refining and manufacture of silver bars of purity 99.9% and above. ] 110 If the importer, at the time of import, is registered with the Indian Renewable Energy Development Agency or any State Nodal Agency notified for the purpose by the Ministry of New and Renewable Energy, Government of India, for Central Financial Assistance; 111 If,- (a) the importer maintains a proper account of import, use and consumption of the specified goods imported for the purpose of repairs of ocean going vessels and submits such account periodically to the commissioner of customs in such form and in such manner as may be specified by the said commissioner; (b) the importer, by the execution of bond, in such form and for such sum as may be specified by the Commissioner of Customs, binds himself to pay on demand an amount equal to the duty leviable,- on the spares and consumables, as are not proved to the satisfaction of the said commissioner to have been used or otherwise consumed for the aforesaid purpose, within a period of three months from the date of importation thereof or within such extended period as that commissioner, on being satisfied that there is sufficient cause for not using or consuming them, as the case may be, for the aforesaid purpose within the said period, allow. Explanation .- Ocean going vessels includes- (i) Liners; cargo vessels of various kinds including refrigerator vessels for the transport of meat, fruit or the like, vessels specified for the transport of particular goods (grain, coal, ores or the likes); tankers (petrol, wine or the like); yachts and other sailing vessels; cable ships; ice-breakers; floating factories of all kind (for processing whales, preserving fish or the like) whale catchers; trawlers and other fishing vessels; life boats, scientific research vessels; weather ships; vessels for the transportation or mooring of buoys; pilot boats; hopper barges for the disposal of dredged material or the like; (ii) War ships of all kinds including submarines; (iii) Tugs, dredgers, fire-floats and salvage ships; and (iv) Oil rigs, drilling ships and jack-up rigs. ] 48 [ 112 If the duty amount per kg calculated at the rate of 70% ad valorem, is more than Rs. 49/- per kg. ] List 1 (See S. No. 52 of the Table) (1) Amprolium hydrochloride (2) Ascorbyl dipotassium 2 sulphate dihydrate (3) Ascorbyl polyphosphate (4) Avilamycin (5) Avoparcin (6) Bovine albumin fraction (7) Bovine somatotropin (8) Buparvaquone (9) Calf serum/foetal calf serum (10) Dulbecco phosphate buffer saline medium (11) Flavophospholipol (12) Follicular stimulating hormone (FSH) (13) Gonadotropin releasing hormone (GnRH) (14) Halofuginone bromide (15) Human chorionic gonadotropin hormone (HCG) (16) Ivermectin (17) Lasolacid sodium (18) Leutinising hormone (19) Lincomycin powder (20) Lincospectin (bulk drug lincomycin spectinomycin 1:2) (21) Maduramicin ammonium/haduramycin ammonium (22) Monensin granulated (coban premix) (23) Ovaprim [gonadotropin releasing hormones] (GnRH) analogue with domperidone (24) Pleuromutilin (25) Pregnant mare serum (PMSG) (26) Prostaglandin F2 alpha (27) Prostaglandin (28) Prostaglandins (PgF2 alpha) (29) Robenidin HCL (30) Salinomycin 12% (31) Tiamulin hydrogen fumarate (32) Tiamulin hydrochloride (33) Tylan premix (34) Tylosin tartarate/tylosin phosphate (35) Vaccine for fish (36) Virginiamycin (37) 4-hexyl resorcinol List 2 (See S. No 75 of the Table) Omitted List 2A (See S.No. 75A of the Table) Omitted List 3 (See S.No 80 of Table) (1) Allopurinol (2) Amikacin (3) Amiodarone (4) Amphotericin-B (5) Amrinone (6) Amifostine (7) Aprotinin (8) Atracurium besylate (9) Baclofen (10) Bleomycin (11) Busulphan (12) BCG vaccine, Iopromide, Iotrolan (13) Carbidopa with Levodopa (14) Cefoperazone (15) Ceftizoxime (16) Chlorambucil (17) Chorionic Gonadotrophin (18) Clindamycin (19) Cyclophosphamide (20) Cefpirome (21) Dactinomycin (22) Dacarbazine (23) Daunorubicin (24) Desmopressin (25) Desferrioxamine (26) Dimercaprol (27) Dobutamine (28) Disopyramide Phosphate (29) Dopamine (30) Disodium Pamidronate (31) Eptifibatide (32) Gemcitabine (33) Glucagon (34) Hydroxyurea (35) Ifosfamide (36) Isoprenaline (37) Interferon alpha - 2b/interferon alpha- 2a/Interferon NL/ Interferon alpha NL(LNS) (38) Isoflurane (39) Ketamine (40) Lactulose (41) Levodopa (L-Dopa) (42) Lomustine (43) Lamivudine (44) Letrozole (45) Leuprolide Acetate (46) Latanoprost (47) Melphalan (48) Mercaptopurine (49) Mesna (50) Methotrexate (51) Methyl prednisolone (52) Mitomycin (53) MMR (Measles, mumps and rubella) vaccine (54) Mustin Hydrochloride (55) Netilmicin (56) Naloxone (57) Nitroglycerine (58) 1 [Micronised Progesterone or Injection Progesterone] (59) Octreotide (60) Pancuronium Bromide (61) Pilocarpine (62) Podophyllotoxin (63) Piperacillin (64) Praziquantel (65) Pralidoxime (66) Prazosin (67) Protamine (68) Quinidine (69) Sodium Cromoglycate spincaps and cartridges (70) Sodium Hyalauronate sterile 1% and 1.4% solution (71) Somatostatin (72) Somatropin (73) Streptokinase and Streptodomase preparations (74) Strontium Chloride (85 Sr.) (75) Thioguanine (76) Tobramycin (77) Tissue Plasminogen Activator (78) Tetanus Immunoglobin (79) Typhoid Vaccines : (i) VI Antigen of Salmonella Typhi, and (ii) Ty 2la cells and attenuated non-pathogenic strains of S. Typhi (80) Tretinoin (81) Tribavirin/Ribavirin (82) Urokinase (83) Ursodeoxycholic Acid (84) Vancomycin (85) Vasopressin (86) Vecuronium Bromide (87) Zidovudine (88) 5-Fluorouracil (89) Pegulated Liposomal Doxorubicin Hydrochloride injection (90) Ketoanalogue preparation of essential amino acids (91) Recombinant human Erythropoietin (92) Pergolide (93) Kit for bedside assay of Troponin-T (94) University of Wisconsin Solution for storing, transporting, flushing donor organs for transplant (95) Lopinavir plus Ritonavir (co-formulation of Lopinavir and Ritonavir) (96) Miltefosine (97) Milrinone Lactate (98) Methoxy Isobutile Isonitrile (MIBI) (99) Haemophilus Influenzae Type b Vaccine (100) Mycophenolate Sodium (101) Verteporfin (102) Capecitabine (103) Daclizumab (104) Ganciclovir (105) Infliximab (106) Drotrecogin alfa (activated) (107) Eptacog alfa activated recombinant coagulation factor VIIa (108) Muromonab CD3 (109) Japanese encephalitis vaccine (110) Interluekin-2 (111) Valgancyclovir (112) Low molecular weight heparin (113) Didanosine; (114) Efavirenz; (115) Indinavir; (116) Nelfinavir; (117) Nevirapine; (118) Stavudine; (119) Abacavir Sulphate; (120) Lopinavir; (121) Tenofovir Disoproxil; (122) Emtricitabine; (123) Azathioprine ; (124) Antinomycin D; (125) Cisplatin; (126) Cytosine Arabinoside (Cytarabine); (127) Danazol; (128) Doxorubicin; (129) Etoposide; (130) Flutamide; (131) Ondansetron; (132) Paclitaxel; (133) Tamoxifen Citrate; (134) Vinblastine Sulphate; (135) Vincristine; (136) Eurocollins Solution; (137) 40 [ Everolimus ] tablets/dispersible tablets; (138) Poractant alfa; (139) Exemestane; (140) Recombinant Human Interferon beta 1-a; (141) Troponin-I whole blood test kit; (142) Blower/mister kit for beating heart surgery; (143) Fluoro Enzyme Immunoassay Diagnostic kits.; (144) Tablet Telbivudine (145) Injection Exenatide (146) DTaP-IPV-Hib or PRP-T combined Vaccine (147) Pneumococcal-7 Valent Conjugate Vaccine (Diphtheria CRM 197 Protein) (148) Injection Thyrotropin Alfa (149) Injection Omalizumab. 5 [(150) Abatacept (151) Daptomycin (152) Entacevir (153) Fondaparinux Sodium (154) Influenza Vaccine (155) Ixabepilone (156) Lapatinib (157) Pegaptanib Sodium injection (158) Suntinib Malate (159) Tocilizumab ] 24 [(160) Agalsidase Beta (161) Anidulafungin (162) Capsofungin acetate (163) Desflurane USP (164) Heamostatic Matrix with Gelatin and human Thrombin (165) Imiglucerase (166) Maraviroc (167) Radiographic contrast media (Sodium and Meglumine ioxitalamate, Iobitridol and Sodium and meglumine ioxaglate) (168) Sorafenib tosylate (169) Varenciline tartrate (170) 90 Yttrium ] 41 [ (171) Rasburicase (172) Nilotinib (173) Pneumococcal sacchride Conjugate Vaccine adsorbed 13- valent suspension for injection (174) Micafungin sodium for injection ; ] 44 [ (175) Bevacizumab] List 4 (See S. No. 83 and 403 of the Table) (1) Abciximab (2) Aurothiomalate Sodium (3) Asparaginase (4) Agglutinating Sera (5) Anti-Diphtheria Normal Human Immunoglobulin (6) Anti-Haeomophilic Factor concentrate (VIII and IX) (7) Anti-human lymophocyte immunoglobulin IV (8) Anti-human thymocyte immunoglobulin IV (9) Anti-Pertussis Normal Human Immunoglobulin (10) Anti-Plague serum (11) Anti-Pseudomonas Normal Human Immunoglobulin (12) Anti-Rabies Normal Human Immunoglobulin (13) Anti -D Immunoglobulin (14) Basiliximab (15) Beractant Intra-tracheal Suspension (16) Blood group sera (17) Botulinum Toxin Type 'A' (18) Burn therapy dressing soaked in gel (19) Bovine Thrombin for in vitro test for diagnosis in Haemorrhagic disorders (20) Bovine Albumin (21) Bretyleum Tossylate (22) Calcium Disodium Edetate (23) Carmustine (24) Cesium Tubes (25) Calcium folinate (26) Cholestyramine (27) Christmas Factor Concentrate (Coagulation factor IX prothrombin complex concentrate) (28) Cobalt-60 (29) Corticotrophin (30) Cyanamide (31) Diagnostic Agent for Detection of Hepatitis B Antigen (32) Diagnostic kits for detection of HIV antibodies (33) Diphtheria Antitoxin sera (34) Diazoxide (35) Edrophonium (36) Enzyme linked Immunoabsorbent Assay kits [ELISA KITS] (37) Epirubicin (38) Fibrinogen (39) Floxuridine (40) Follicle Stimulating Hormone [FSH] (41) Flucytosin (42) Filgrastim /Molgramostim (G-CSF/GM-CSF) (43) Flecainide (44) Fludarabine Phosphate (45) Foetal Bovine Serum (FBS) (46) Gadolinium DTPA Dimeglumine (47) Gallium Citrate (48) Gasgangrene Anti-Toxin Serum (49) Goserlin Acetate (50) Hepatitis B Immunoglobulin (51) Hexamethylmelamine (52) Hydralazine (53) Idarubicine (54) Idoxuridine (55) Imatinib Mesilate (56) Irinotecan (57) Immunoassay kit for blood Fibrinogen degradation product for direct estimation for diagnostic test in D.I.C. (58) Inactivated rabies vaccine [Human diploid cell] (59) Inactivated rabies vaccine [Vero-cell] (60) Intravenous amino acids (61) Intravenous Fat Emulsion (62) Iopamidol (63) Iohexol (64) (a) Indium (III) in bleomycin (b) Indium 113 Sterile generator and elution accessories (c) Indium 113 in brain scanning kit (d) Indium 113 in liver scanning kit (65) Iscador, CLIA diagnostic kits (66) Levodopa with benserazine (67) Lenograstim (68) Meningococcoal A and C combined vaccine with diluant solvent (69) Methicillin (70) Metrizamide Inj with diluant (71) Monocomponent insulins (72) Mycophenolate Mofetil (73) Nalorphine (74) Normal Human plasma (75) Normal Human immunoglobulin (76) Nuclear magnetic resonance contrast agent (77) Normal Human serum Albumin (78) Penicillamine (79) Pentamidine (80) Penicillinase (81) Poliomyelitis vaccine (inactivated and live) (82) Potassium Aminobenzoate (83) Porcine Insulin Zinc Suspension (84) Prednimustine (85) Porcine and Bovine insulin (86) Procarbazine (87) Purified Chick Embryo Cell Rabies Vaccine (88) Pyridostigmine (89) Pneumocystis carinii IF kits (90) Prostaglandin E 1 (PGE1) (91) Radio-immunoassay kit for hormones (T3, T4, TSH Insulin, Glucogen, Growth Hormone, Cortisol, L.H., FSH and Digoxin) (92) Radioisotope TI 201(93) (93) (a) Rabbit brains thromboplastin for PT test (b) Reagent for PT tests (c) Human Thrombin for TT tests (94) Rabies immunoglobulin of equine origin (95) Ritonavir (96) Rivastigmine (97) Rituximab (98) Sevoflurane (99) Saquinavir (100) Recuronium Bromide (101) Septopal beads and chains (102) Sodium Arsenate (103) Freeze Dried Form of Human Follicle Stimulating and Luteinising Hormones (104) Solution of Nucleotides and Nucliosides (105) Specific Desensitizing Vaccine (106) Sterile Absorbable Haemostat for control of surgical vessel bleeding (107) Strontium SR-89 Chloride (108) Suxamethonium Chloride (109) Selenium-75 (110) Teicoplanin (111) Technitium-99M (112) Tetrofosmin (113) Ticarcillin (114) Tranexamic Acid (115) Tocainide (116) Tri-iodothyronine (117) Triethylene Tetramine (118) Trastuzumab (119) Thrombokinase (120) Teniposide (121) Trans-1- diamino cyclohexane Oxalatoplatinum (122) Ticarcillin Disodium and Potassium Clavulanate combination (123) Vindesin Sulphate (124) X-ray diagnostic agents, the following :- (i) Propylidone (ii) Ethyl iodophenylun decylate (iii) Iodipammide methyl glucamine (iv) Lipidoll utra fluid (v) Patent blue (125) Zalcitabine (126) Zoledronic Acid List 5 (See S. No. 84 of the Table) (1) Chlorine (2) Helium (3) Silicon tetra chloride (4) Germanium tetra chloride (5) Phosphorous oxychloride (6) Sulphur hexa flouride oxygen (7) Olige-poly iso cyanate ethyl-acetate solution (8) Colouring ink for fibre (9) Binder of polyurethane or vinyl chloride-vinyl acetate copolymer (10) UV resin 1 2/ Ribbon matrix (11) Nylon-12/Ether Ester Elastomer (12) Coloured Nylon 12/ Nylon 11/Ether Ester Elastomer (13) Elongated polyethylene tape (14) Polyester tape/Water blocking tape (15) Nylon thread/water swellable yarn (16) Polyethylene cord (17) Biaxily oriented nylon tape (18) Silica tube / rod, other than preform (19)Aramid Yarn (20) Impregnated Glass fibre reinforcement (Glass rovings) (21) Rip Cord (22) Nylon 11 (23) Co-polymer coated MS Tape / Stainless steel tape (24) Low smoke zero Halogen compound for sheathing (25) Glass yarn / Rovings (26) Complex high molecular weight resin in acrylate solution (27) Acrylated monomers (28) Photoinitiater (29) Tert Butyl perbenzoate (30) Zinc soap of long fatty acid mixture (31) Modified polypropylene (32) Ethylene acrylic acid (EAA)/Vinyl ester List 6 (See S. No. 84 of the Table) (1) Glass yarn / Rovings (2) UV resin (3) Complex high molecular weight resin in acrylate solution (4) Acrylated monomers (5) Photoinitiater (6) Tert Butyl perbenzoate (7) Zinc soap of long fatty acid mixture (8) Modified polypropylene (9) Ethylene acrylic acid (EAA)/Vinyl ester List 7 (See S. No. 85 of the Table) (1) (a) Laser rods - Neodymium: YAG, Neodymium : Glass, Ruby, Erbium : YAG, TI : A1203, Alexandrite, HO : YAG (b) Helium- Neon Laser Tubes (c) Semi-conductor visible lasers (d) Dielectric coated mirrors for visible , near IR 10.6 micrometer region (e) Hard dielectric coated optics including thin film polarisers, calcite polarisers and Beam splitters (f) ZnSe mirrors, ZnSe lenses and ZnSe windows (g) Gratings and prisms (h) Dye cells and laser dyes (i) Thin film polarisers for visible, near IR region (j) Electro- optic switches for visible, near IR and 10.6 micrometer region (k) Flash lamps (Xenon, Krypton) (l) Arc lamps (Krypton) (m) Second harmonic generation crystals (2) Energy storage capacitors (3) Thyratrons (4) Photodetectors and photomultipliers (5) Metering needle valves and pressure indicators (6) Spectroscopic grade pure gases viz., Xenon, Krypton, Fluorine, Argon (7) Vaccum pumps of capacity upto 20 litres per minute (8) Quartz and Special glasses (9) Non linear crystals (10) Electro- optic and Acousto-optic switches (11) Special materials, namely, High purity gases, Kovar, Alumina and Zirconia fibres, Recrystallised Alumina Tubes, Optical polishing materials, Optical cleaning material, Dyes and Pitch for optical polishing (12) Optical filters List 8 (See S. No. 94 of the Table) Omitted List 9(A) (See S.No. 174 of the Table) PARTS, CONSUMABLES AND OTHER ITEMS (1) Leather, plastic, rubber coco board, masonite board or plastic board, heels with or without rubber/PVC top lift (2) Toe caps and counters for leather footwear (3) Insoles or midsoles and sheets therefor (4) Welts made from leather or plastic (5) Shoes eyelets (6) Felt sleeves (7) Heel tips (8) Unit soles with or without heels (9) Stamping wheels (10) Patterns for leather footwear (11) Plastic or nylon tipped hammers (12) Plastic, PVC or nylon lasts with or without steel hinges (13) Clicking boards for leather machinery (14) Harness needles for hand sewing pre-punched cards (15) Pre-punched cards (16) Leather designers kit, namely, designers knife, shoe measuring tape, designers tape and satra vaccum former (17) Industrial sewing machine needles with leather point (18) Bell skiving knives (19) Band knife for splitting machines (20) Cutting and clicking dies (21) Aluminium shoe forms with or without heating elements (22) Silver marking pencils or pens and refills thereof (23) Polyurethane films and polyurethane foils of thickness 0.3 mm. and above but not above 0.7 mm., for finishing leather (24) Non-woven material coated with thermoplastic for the manufacture of toe-counters (25) Cellulose board insole sheets (26) Leather board made from leather scrap for the manufacture of counters and stiffeners (27) Masonite or coco board (28) Sole leather bends (29) Styrene butadiene styrene oilbound copolymer for the manufacture of soles (30) Rubber, resin rubber, EVA or crepe sheets for soles and heels (31) Felt, all types (32) Sulphonated / sulphated / oxidised / chlorinated cod oil or sulphonated / sulphated / oxidised/ chlorinated neats foot oil or sulphonated / oxidised / chlorinated fish oil or mixtures thereof (33) Pigment finishes for leather (34) Aluminium tanning agents, oil tanning agents, zirconium tanning agents, basic chrome sulphate (35) Polishes, creams and similar preparations for footwear or leather (36) Casein, resin (other than acrylic resin) and polyurethane binders (37) Slip agents of heading 32.08 (38) Lacquer and lacquer emulsion of heading 32.08 (39) Preservatives of heading 29.42 (40) Synthetic fat liquors (with or without hydrocarbons), non-ionic fat liquors, and mixtures thereof (41) Fatty oil or pull up oil (42) Syntans (43) Solvent soluble dye Mordant Brown of Hue No.79 (44) Solvent soluble dye Acid Brown of Hue Nos. 75, 76, 97, 98, 126, 127, 144, 159, 160, 161, 162, 165, 188, 191, 194, 196, 214, 237, 256, 265, 268, 270, 282, 290, 298, 303, 310, 321, 322, 349, 355, 358, 359, 360, 362, 365, 373, 387, 396, 402, 422, 425, 432, 433, 434 or 447 (45) Solvent soluble dye Acid Black of Hue Nos. 50, 52, 71, 76, 82, 83, 84, 85, 115, 132, 169, 172, 194, 209, 210, 213, 215, 221 or 234 (46) Solvent soluble dye Acid Blue of Hue Nos. 115, 133, 134, 193, 254, 260, 312 or 349 (47) Solvent soluble dye Direct Blue of Hue No. 59 or 78 (48) Solvent soluble dye Acid Red of Hue No. 97, 119, 120, 167, 231, 234, 248, 283, 324, 362, 399, 404, 407 or 423 (49) Solvent soluble dye Direct Red of Hue No. 23, 99, 111 or 239 (50) Solvent soluble dye Acid Green of Hue No. 20, 26, 68 or 111 (51) Solvent soluble dye Acid Orange of Hue Nos. 51, 66, 78, 80, 95, 162, 168 or 170 (52) Solvent soluble dye Acid Violet of Hue No. 54, 80 or 90 (53) Solvent soluble dye Acid yellow of Hue No. 96, 99, 194, 204, 220 or 243 (54) Solvent soluble dye Direct Orange of Hue No. 61 (55) Solvent soluble dye Direct Brown of Hue No. 94 or 209 (56) Solvent soluble dye Direct Violet of Hue No. 46 (57) Solvent soluble dye Direct Black of Hue No. 120 or 155 (58) Solvent soluble dye Direct Green of Hue No. 66. List 9(B) (See S. No. 174 of the Table) OTHER PARTS, CONSUMABLES AND ITEMS (1) Formulations containing either Thio Cyano Methyl Thio Benzothiazole (TCMTP) or Para Chloro Meta Cresol (PCMC) or both; Self basifying chrome tanning agents (2) Penetrators (3) Stamping foil in strips of width not exceeding 6 inches (4) Eyelets, hooks, rings, all type locks including magnetic locks, push clips, metal handle, key chain holder, corners, puller, fancy caps, clamps, decorative rivets, decorative fittings and logos, handle holders, studs, sockets, hinges, buckles, metal frames, tacks and washers (5) Buttons, press-fasteners and snap-fasteners falling under heading 96.06 (6) Magnetic buttons (7) Abrasive sheets falling under sub-heading 6805.20 (8) Shanks and welts falling under headings 73.26 and 64.06 respectively (9) The following chemicals for the manufacture of leather chemicals : (I) Phenol (II) Naphthalene (III) Paraffin wax (IV) Dicarboxylic acid and mixtures thereof (V) Acrylic acid / Methacrylic acid (VI) Synthetic substitute for Sperm oil (VII) Synthetic substitute for Neats foot oil (VIII) Alcohol mixture of C9, C10, C11 (IX) Thio cyano methyl thio benzothiazole (TCMTB) (X) Para chloro meta cresol (PCMC) (XI) Lactic Casein (XII) Titanium Dioxide (XIII) Iron Oxide (XIV) Cellulose Acetate Butyrate (XV) Methoxydihydropyrane (XVI) Dioxy Diphenyl Sulphone (XVII) Dehydro Thio Paratoludine (XVIII) Nitro Amino Phenol Sulphonic Acid (XIX) Dicyandiamide (XX) Silicone Oil in solvent or water (XXI) Sodium Picramate (XXII) Methyl Pyrozollic Acid (XXIII) Itaconic Acid (XXIV) 1-Methoxy Propanol-2 (XXV) Ethyl Acetate (XXVI) Butyl Acetate (XXVII) 2 Ethyl Hexyl Acetate (XXVIII) Emulsifiers (XXIX) Ethyl Glycol (XXX) Butyl Glycol List 10 (See S. No.190 of the Table) Omitted List 11 Omitted List 12 (See S. No. 214, 216 and 217 of the Table) (1). Land Seismic Survey Equipment and accessories, requisite vehicles including those for carrying the equipment, seismic survey vessels, global positioning system and accessories, and other materials required for seismic work or other types of Geophysical and Geochemical surveys for onshore and offshore activities (2) All types of Drilling rigs, jackup rigs, submersible rigs, semi submersible rigs, drill ships, drilling barges, shot-hole drilling rigs, mobile rigs, workover rigs consisting of various equipment and other drilling equipment required for drilling operations, snubbing units, hydraulic workover units, self elevating workover platforms, Remote Operated Vessel(ROV). (3) Helicopters including assemblies/parts. (4) All types of Marine vessels to support petroleum operations including work boats, barges, crew boats, tugs, anchor handling vessels, lay barges and supply boats, Marine ship equipment including water Maker, DP system and Diving system. (5) All types of Equipment/units for specialised services like diving, cementing, logging, casing repair, production testing, simulation and mud services, oil field related lab equipment, reservoir engineering, geological equipment, directional drilling, Stimulation, Coil Tubing units, drill stem testing (DST), data acquisition and processing, solids control, fishing(as related to downhole retrieval in oil field operations), well control, blowout prevention(BOP),pipe inspection including Non Destructive Testing, coring, gravel pack, well completion and workover for oil/gas wells including wireline and downhole equipment. (6) All types of casing pipes, drill pipes, production tubing, pup joints, connections, coupling, kelly, cross overs and swages, Drive Pipes. (7) All types of drilling bits, including nozzles, breakers and related tools. (8) All types of oil field chemicals including synthetic products used in petroleum operations, oil well cement and cement additives, required for drilling, production and transportation of oil or gas. (9) Process, production and well platforms for oil, gas and water injection including items forming part of the platforms and equipment required like process equipment, turbines, pumps, generators, compressors, primemovers, water makers, filters and filtering equipment, Telemetery, Telecommunication, Tele-Control and other material required for platforms. (10) Line pipes for flow lines and trunk pipelines including weight-coating and wrapping. (11) Derrick barges, Mobile and stationary cranes, trenchers, pipelay barges, cargo barges and the like required in the construction/installation of platforms and laying of pipelines (12) Single buoy mooring systems, mooring ropes, fittings like chains, shackles, couplings marine hoses and oil tankers to be used for oil storage and connected equipment, Tanks used for storage of oil, condensate, water, mud, chemicals and related materials (13) All types of fully equipped vessels and other units/equipment required for pollution control, fire prevention, fire fighting, safety items like Survival Craft, Life Raft, fire and gas detection equipment, including H2S monitoring equipment. (14) Mobile and skid mounted pipe laying, pipe testing and pipe inspection equipment (15) All types of valves including high pressure valves (16) Communication equipment required for Petroleum operations including synthesized VHF Aero and VHF Marine multi channel sets (17) Non-directional radio beacons, intrinsically safe walkie-talkies, directional finders, EPIRV, electronic individual security devices including electronic access control system (18) Specialized antenna system, simplex telex over radio terminals, channel micro wave systems, test and measurement equipment (19) X-band radar transponders, area surveillance system (20) Common depth point (CDP) cable, logging cable, connectors, geo-phone strings, perforation equipment and explosives (21) Wellhead and christmas trees, including valves, chokes, heads spools, hangers and actuators, flexible connections like chicksons and high pressure hoses, shut down panels (22) Cathodic Protection Systems including anodes (23) Technical drawings, maps, literature, Data tapes, Operational and Maintenance Manuals required for petroleum operations (24) Sub-assemblies, tools, accessories, stores, spares, materials, supplies, consumables for running, repairing or maintenance of the goods specified in this List. List 13 (See S. No. 218 of the Table) (1) Land Seismic Survey Equipment and accessories, seismic survey vesels, global positioninig system and accessories, and other materials required for seismic work or other types of Geophysical and Geochemical surveys for on-shore activities (2) All types of Drilling rigs, shot-hole drilling rigs. Mobile rigs, workover rigs consisting of various equipment and other drilling equipment required for drilling operations, snubbing units, hydraulic workover units, self-elevating workover platforms (3) All types of Equipments / units for specialized services like, cementing, logging, casing repair, Production testing, simulation and mud services, reservoir engineering, geological equipment, directional drilling, Stimulation, Coil Tubing units, drill stem testing (DST), data acquisition and processing, solids control, fishing (as related to downhole retrieval in coal bed methane operations), well control, blowout prevention (BOP), pipe inspection including Non Destructive Testing, coring, gravel pack, well completion and workover for CBM wells including wireline and downhole equipment (4) All types of casing pipes, drill pipes, production tubing, pup joints, connections, coupling, Kelly, cross overs and swages, Drive Pipes (5) All types of drilling bits, including nozzles, breakers and related tools (6) All types of coal bed methane chemicals including synthetic products used in coal bed methane operations, required for drilling, production and transportations of gas (7) Process, production and well installation for CBM and water injection including items forming part of the installation and equipment required like process equipment, turbines, pumps, generators, compressors, primemovers, water makers, filters and filtering equipment, Telemetery, Telecommunication, Tele-Control and other material required for installations (8) Line pipes for flow lines and trunk pipelines including weight-coating and wrapping (9) Tanks used for storage of coal bed methane, water, mud, chemicals and related materials (10) All types of fully equipped units/equipment required for pollution control, fire prevention, fire fighting, safety items like fire and gas detection equipment, including H2 S monitoring equipment (11) Mobile and skid mounted pipe laying, pipe testing and pipe inspection equipment (12) All types of valves including high pressure valves (13) Communication equipment required for operations including synthesized VHF Aero and VHF multi channel sets, Non-directional radio beacons, intrinsically safe walkietalkies, directional finders, EPIRV, electronic individual security devices including electronic access control system (14) Specialized antenna system, simplex telex over radio terminals, channel micro wave systems, test and measurement equipment (15) Area surveillance system (16) Common depth point (CDP) cable, logging cable, connectors, geo-phone strings, perforation equipment and explosives (17) Wellhead and Christmas trees, including valves, chokes, heads spools, hangers and actuators, flexible connections like chicksons and high pressure hoses, shut down panels, Cathodic Protection Systems including anodes (18) Technical drawings, maps literature, Data tapes, Operational and Maintenance Manuals required for coal bed methane operations (19) Sub-assemblies, tools, accessories, stores, spares, materials, supplies, consumables for running, repairing or maintenance of the goods specified in this List List 14 (See S. No 219 of the Table) Omitted List 15 (See S. No. 222 of the Table) Omitted List 16 Omitted List 17 (See S.No. 228 of the Table) 1. All types of Refinery Process Units including distillation (CDU, VDU, Condensate Fractionator), thermal cracking (Delayed Coker, Visbreaker, Flexicoker), catalytic cracking (FCC, Hydrocracker), lube processing (Deasphalting, Dewaxing, Solvent Extraction), hydrodesulphurisation/ hydrotreating (Naphtha, Diesel, VGO, ARDS, LC Fining, H. Oil), alkylation, isomerisation, catalytic reforming, treating (Merox, Amine), recovery (Propylene, Ethylene, Butane), synthesis (MTBE, TAME), gas concentration plant, bitumen blowing, sour water stripping and extraction (Pentane, Hexane, BTX). 2. All types of Hydrogen Generation, Recovery and Purification Plants, Sulphur Recovery Plants including Tail Gas Treatment Units, with associated components and equipments, including reactors (like shift, Claus, hydrotreater, CBA, desulphurizer), furnaces, steam reformers, waste heat boilers, condensers, Pressure Swing Adsorption (PSA) systems, incinerators, vessels, boilers, pumps, compressors, drivers, alongwith associated instrumentation and control systems and auxiliaries (skidded or otherwise). 3. All types of Utility Systems, including Nitrogen Systems comprising of generation, storage and vaporization plants, Flare Systems comprising of flare tips, stacks, seal drums, knockout drums and pumps, Refrigeration Systems comprising of compressors, refrigerant storage and heat exchangers, Emergency Power Systems comprising of generators, UPS and batteries, with component equipments and all systems auxiliaries, instrumentation and control systems. 4. All types of Process Subsystems, including Continuous Catalyst Regeneration Systems for Reformer, Recovery Plus Systems for Reformer, Power Recovery Train Systems for FCC, Feed Nozzles for FCC, Vapour Recovery Systems, Cryogenic Systems for LPG either supplied separately or as a whole, with component equipments, drivers, instrumentation and control systems, and auxiliaries. 5. All types of Water Handling and Treatment Systems, including sea water intake systems comprising of sea water band screens, Desilting systems for still basin, Sea Water filtration/ Chlorination Systems, Desalination plants, Cooling Water Towers, Demineralization plants, Condensate Polishing Systems, Deaerators and Potable Water Systems, and all component equipments, vessels, pumps, vapourisers, condensers, filters, eductors, heat exchangers, drivers, screens, framing structures, gates, instrumentation and control systems, activated carbons, ion exchange resins, resin traps, additive injection systems and auxiliaries (skidded or otherwise) 6. All types of Effluent Solids/Liquids/Gaseous Processing, Handling, Control, Abatement and Disposal Systems, including plate interceptors, dissolved air floatation devices, skimmers, hydrocyclones, clarifiers, chemical dosing systems, acid treatment and biological treatment systems, Spent Caustic Neutralisation Systems and Sewage Filtration/Treatment Systems, with component equipments, instrumentation and control systems. 7. All types of Air Handling Systems and Equipments, including plant/instrument air compressors, FD/ID fans, blowers, dehumidifiers, pneumatic systems, mixers, dryers, intake filters, vents, silencers, cyclones, stacks, manifolds, ducts, with drivers, auxiliary seal/lube/control oil systems, instrumentation and control systems. 8. All types of Fired Heaters and Boilers, with radiant coils and sections, transfer line assemblies, convection coils and sections, cross over/jump over pipes, fittings, tube sheets, tube supports, refractory materials, structural steel supports, casings, stacks, dampers, soot blowers, ducting systems, gas/oil/dual burner assemblies, burner tiles, waste heat boilers (WHB), steam generators, economizers, air/fuel preheat systems, FD/ID fans, fuel gas/oil skids, and including LPG vaporizers, steam superheaters, heat recovery steam generators, electric heaters, FCC flue gas coolers, steam reformers, CO boilers, circulating fluidised bed boiler, auxiliary boilers, process interheaters, thermal reactors, thermal incinerators, coke feeders, limestone feeders, ESP/baghouse filters, alongwith associated instrumentation control systems, including burner lighting, flame detection and burner management systems. 9. All types of Compressors, including axial, centrifugal, diaphragm, reciprocating, rotary screw and sliding vane type compressors, for gas, air, hydrocarbon and all special services including FCC Power Recovery Trains (PRT), LPG vapour return blowers, with drivers of motor or steam turbine or expansion turbine or engine or gas turbine or hydraulic turbine types, speed governor systems, seal/lube/control oil systems (skidded or otherwise), gear assembly, bearings, barring gears, clutch, couplings, intercoolers, after coolers, suction filters, instrumentation control systems including vibration monitoring anti surge control, inlet guide vane control, sequencer control, control panel and machine condition monitoring systems. 10. All types of Heat Exchangers, including shell and tube, double pipe, kettle, plate welded plate, high pressure (breech lock), Armstrong and brazed types, with plain or fin or High Flux or U tubes for cooling intercooling, trim cooling, chilling, condensing, crystallizing, heating, vaporizing or reboiling services, with tubes, tube sheets, head assemblies, shells, flanges, bolts and nuts, gaskets, baffles, tie rods, instrumentation and control systems. 11. All types of Air Cooled Exchangers, for cooling, intercooling, trim cooling, chilling and condensing services, with plain/finned tubes, of carbon steel, admiralty brass, alloy steel, stainless steel, monel or titanium or other materials, with fans, fan drivers, structural steel support frameworks, instrumentation and control systems, anti vibration systems. 12. All types of Agitators and Mixers, including static, jet, dilution types, motor drivers, aeration systems, with instrumentation and control systems. 13. All types of Filters, Screens and Strainers, including backwash, bucket, carbon, cartridge, duplex, pressure / mechanical, rotary, drum, sand, sock/bag, vaccum types, and special FCC net bottoms catalyst filters, screens, strainers, demisters and sea water clarifiers, with instrumentation and control systems. 14. All types of Vaccum Producing Equipments, including ejectors, educators, venturies, with instrumentation and control systems. 15. All types of Materials Separation systems, including cyclones, centrifuges, coalescers, dust collectors, electrostatic precipitators, oily water separators, flocculators, and specialized systems of Crude Oil Desalters, Reactor Cyclones and Regenrator Cyclones for FCC, third Stage Separators and Fourth Stage Cyclone Separators for FCC, with vessel internals, grids, distributors, supports, instrumentation and control systems. 16. All types of Materials Transporting Equipments, including loading and unloading arms and racks, gantries, dispatch tanks, loading / transfer pumps, hydraulic systems, weigh bridges, Diesel shunters, feed or injection or spray nozzles, skimmers, soot blowers, with instrumentation and control systems, including load cells and metering stations. 17. All types of Electrical Equipments including switchyard equipments, transmitters, relays, solar power systems, including solar panels, batteries and charger, phase shift monitors, motor or steam turbine generators, protection relays for generators, auxiliary seal/lube/control oil systems, actuators, annunciators, lighting masts, lighting fittings, panels, batteries and battery chargers, bus ducts, all types of cables including power/instrument/compensating/fibre optic/coaxial/control cables, cable joints, capacitors, distribution boards, fittings, substations, grounding/neutral resistors, heat tracing systems including insulation, microprocessor based process controllers, local control stations, motor control centres, power control centres, HT/LT motors, shock eliminators, HT/LT switch gears, transducers, HT/LT transformers, UPS and variable speed drivers over current protection devices, instrumentation and control systems including load distribution and management systems and auxiliaries, (skidded or otherwise). 18. All types of Materials Handling Equipments including belt or pneumatic conveyors, ducts, hoists, bucket or jib cranes, (with or without gangways), pipe and hoses, funnels, hoppers, disengaging lock hoppers, catalyst addition pots, valves and sampler devices, bagging, weighing and bag stitching systems, weigh bridges, buoy systems for crude oil receipt, pipeline and manifolds with valves, fenders, mooring aids, laser docking systems, product tanker loading facilities, with associated equipments, instrumentation and control systems, and auxiliaries. 19. All types of coke handling and storage equipments, including coke crushers, coke cutting systems, coke drum unheading devices, coke drum switching systems, coke conveyors, stackers and reclaimers, silos/hoppers, dust abatement systems, belt weighers, Sulfur Handling and Storage Equipments and Sulphur Granulation or Flaking or Prilling Systems with associated equipments, instrumentation and control systems and auxiliaries. 20. All types of Product Filling Systems, including LPG bottles filling machines and bitumen drum filling machines, and associated equipments, instrumentation and control systems and auxiliaries. 21. All types of injections and Dosing Packages, for Injection or metering or dosing of chemicals, additives, inhibitors, odourisers, oxygen scavengers, blocides, chlorine, polymers, caustic, acids, emulsifiers, antifoams or antifoulants, with their component equipments, like drums, tanks, pumps, instrumentation and control systems, auxiliaries (skidded or otherwise). 22. All types of Pumps, including API or non-API, centrifugal , diaphragm, in-line, jockey, vertical, booster, barrel, gear, Sundyne, screw, ram, reciprocating or submersible types, single stage or multistage types, for petroleum crude or intermediate products or petroleum products and byproducts, water including sea water and boiler feed water, chemicals, slops or sludge services, liquid booster for LPG (cryogenic), with motor or steam turbine or hydraulic turbine or diesel engine drivers, and instrumentation and control systems, auxiliaries, including seals flushes, gear boxes, water cooling harnesses and lube oil consoles. 23. All types of Tanks and Storages, including plate materials, flanges, fasteners, nozzles, fittings and other components for assembly/construction/erection at site, and instrumentations, including relief, breather, and rim vent values, nitrogen blanketing systems, roof drain pipings, rim seals, flame arrestors and automatic tank gauging systems, for oil, hydrocarbon (petroleum crude, products, byproducts, intermediate and blend components), water, chemicals, slops, sludge storage in either cone, fixed, floating, dome or internal floating roof configurations, solids storage in silos, bins or hoppers and LPG/propylene/ethylene/propane/butane storage in spheres, bullets or cryogenic tanks, and instrumentation and control systems. 24. All types of Columns, either supplied separately or together, comprising of grids, screens, distributors, nozzles and their supports/fasteners and accessories, for services like absorption, desorption, stripping, fractionation, distillation, splitting, stabilization, extraction, washing or scrubbing services, and column internals comprising of trays either bubble, jet, multi downcorner (MD), sieve or valve trays, or either random or structured type packings, and their appurtenances, instrumentation and auxiliaries. 25. All types of Vessels and Drums, either supplied separately or together, comprising of shells, heads, internals, grids, screens, demisters, coalescers, boots, distributors, packing and their supports/fasteners and accessories, for storage, separation, reaction, mixing, decoking, degassing, flashing, draining, blow down, desuperheating, drying, sealing, receiving, surge and interface controlling services, and their appurtenances, instrumentation, insulation and auxiliaries. 26. All types of Reactors, either supplied separately or together, comprising of shells, heads, catalysts, support materials, grids, screens, demisters, coalescers, distributors, packings and supports/fasteners and accessories, for carrying out cracking (FCC Reactor and Spent Catalyst Stripper), coking (Coke Drums), visbreaking, hydrotreating, hydro desulphurization, hydrocracking, catalytic reforming (Platformer), shift, sulphur (Claus), adsorption (CBA, PSA), oxidizing, treating (Merox), regenerating (FCC Regenerator/Combustor), desulphurising reactions, spray and mixing nozzles and their appurtenances, instrumentation and auxiliaries. 27. All types of Instrumentations, including various types of level/pressure/density/temperature/ flow instruments, detectors, level/pressure/draft/temperature gauges, capacitance/level/limit, proximity switches, transmitters, annunciators, controllers, converters, transducers, temperature sensor assemblies, load cells, orifice assemblies, rotameters, pitot tubes, venturies, meter runs, control/metering panels, pneumatic/motorised/hydraulic/piston actuators, recorders, solenoid operated valves, transmitters, thermocouples, temperature elements, sight glasses, amplifiers, annubars, barriers / isolators, all types of flow meters, custody transfer meters, meter provers, density meters, electromechanical/magnetic/nuclear/radar/ultrasonic level indicators, weighing and bagging systems and test equipments for testing and calibration of above instruments. 28. All types of Transmitters and Monitors, including electronic transmitters for measurement of level, pressure, flow speed, temperature and weight, and monitoring systems for ambient air, fugitive emissions, pipelines, speed, stack emissions and vibration. 29. All types of Control Equipments, including ball/butterfly/gate/globe/needle/plug/bellow sealed type control valves, shutdown valves, self actuating, solenoid, on/off, fast acting quarter turn, pressure regulating, breather and pressure/vaccum relief valves, pilot operated safety valves, and valves for specialised services, such as catalyst addition systems and lock hopper control systems. 30. All types of Control Hardware and Software Systems, including Distributed Control Systems (DCS), Emergency Shutdown Systems (ESD), Programmable Logic Controllers (PLC), Security and Access Systems, Terminal Automation Systems, Advanced Process Control (APC) Systems with Real Time Optimizer (RTO), Supervisory Control and Date Acquisition (SCADA) Systems, and Refinery Information Management System (RIMS) with operator panels, computers, date loggers, interfaces, relay cabinets, engineering controls, large display screens, microwave transmission and receiver equipments, logic multipoint recorder/multiplexers, and their hardware and software 31. All types of Fire and Gas Detection Systems, consisting of LEL/fire/smoke/UV/gas/IR/toxic detectors, panels, cables, weather protection housing, junction boxes, detector cards, cabinets, calibration equipments, beacons and lights, and their hardware and software. 32. All types of Pipes, Tubes and Hoses, including cladded, coated, lined, made of carbon steel, low temperature carbon steel, alloy steel, stainless steel, GRP, copper, aluminium HDPE, PP, fibre glass, monel incolloy, titanium or any other materials, and other in seamless or welded construction, for all applications fields joint coating materials, with instrumentation and control systems like pipeline surge relief systems, auxiliaries, painting and insulation. 33. All types of Pipe Fittings, including elbows, connectors, tees, pipe fabrication accessories, spargers, nozzles, plugs, packing glands, rings, flanges, gaskets, supports, pads, manifolds, siphons, shock absorbers, struts, fasteners, mitre/long radius/short radius bends, sockolets, weldolets, spray nozzles, graylock fittings, swagelock/compression fittings, insulating kits, special steam traps, liquid float traps, bellows, flexible hoses, couplings, vent silencers, and speciality items like Teflon sliders, standpipe expansion joints, spring supports/hangers, scraper tees, pipeline and manifolds with valves, cleaning/scraping/monitoring pigs, pig launcher, pig receiver and pig detection system, cathodic protection system with sacrificial anodes and CP monitoring system, with instrumentation and auxiliaries. 34. All types of valves, including ball, butterfly, check, diaphragm, gate, double disc or knife gate,, globe bellow sealed globe, jacketed, plug, through conduit type valves, with manual/gear/motor/hydraulic operations, for oil, water, steam, hydrocarbon, chemical, cryogenic, subsea, nitrogen blanketing and thermic fluid services, and specialised services valves, like FCC butterfly valves, Cooker switch valves, standpipe slide valves, flue gas divertor valves, pressure reducing station systems, pipeleine and manifolds and riser tie-in manifolds. 35. All types of Gaskets and fasteners, including anchor/foundation/structural bolts, flanges, studs, nuts, washers, and metallic/soft/spiral wound gaskets and O-rings. 36. all types of Structural Steels, Materials and Plates including carbon steel/LT carbon steel/alloy steel/stainless steel plates, bars, rolled sections, tubular sections, HYSD bars, dampers, prefabricated tresties, pipe bridges with pre-installed pipes, loading platforms, steel A frames, blast proof doors, steel tubulars, seamless and welded, special steel piles, dolphins, low, medium and high strength steel, fasteners, and special application refractory/copalite/sulphide resistant quick setting cements. 37. All types of ferrous or non-ferrous pre-fabricated/semi-fabricated, Plant Structures, including pipe racks, supporting frames, trestles, pipe bridges with pipes pre-installed and pre-insulated. 38. All types of Analyzers, either on-line or off line, for measurement of H2S, Oxygen, NOX, SOX, CO2, CO, hydrocarbon, dew point, density, conductivity, pH, combustible gases, oil in water, vapour pressure, silica, sodium, distillation, flash point, moisture, viscosity and smoke point, and analyzer sampling systems/cubicles, analyzer houses with sample conditioning systems, sample probes/sensors, tubings, HAVC systems, calibration gases cylinders and Drager tubes. 39. All types of Laboratory Equipments, including sampling, quality control and analytical equipments for testing and measurement of various petroleum crude/products/by products quality parameters, and including sample collection equipments, gas/ion chromatograph, CFR engines for octane and cetana number, pulse NMR, spectrophotometers of different types, distillation equipment systems, analyzer management systems and laboratory information management systems, with instrumentation, auxiliaries, hardware and software. 40. All types of Safety and Fire Fighting Equipments, for safety of personnel and plant and machinery including fire suits, fire monitors, Q.B. bulbs, spray nozzles, ambient air monitors, heat and flame resistant clothings, portable extinguishers, deluge skid systems, explosimeters, rupture discs, fire fighting systems, fire tenders, foam systems with foam storage and monitor,transport and booms, snorkels, sprinkler systems, breathing air apparatus, fire proofing materials for passive fire protection of steel structures and oil spill protection booms, with auxiliaries. 41. All types of Communication Equipments, including cables, bone mikes, frequency synthesizers, meteorological instruments, microwave transmission and receiving equipments, public address systems, intrinsically safe walkie-talkies, UHF/VHF multi-channel communication systems, radio telemetry systems, with remote telemetry units, portable units and PC based master telemetry units and antenna systems. 42. Initial charge of all types of catalysts, deslocants, zeolites, activated carbons, clay molecular sleves, used in refining and processing of petroleum crude, petroleum products and by-products. 43. Software Support Systems, including training simulation systems, electronic documentation systems, CAD stations, date tapes, operation/maintenance/safety manuals, scanners, plotters, printers, software including licenses, specifications, drawings, technical literature, and their hardware and software. 44. Special Maintenance Systems, including hydro-jetting tools, pneumatic torque wrenches, EOT/mobile cranes, hoists, grinders, high pressure cleaning systems, induction bending machines, auto welding machines, various welding equipments like girth welding, vertical flux cord, bottom saw, four-side edge preparation, angle rolls, rolling and levelling machines, sky climbers, hot tapping machines, bolt tensioners, high pressure test pumps, tube bundles pullers, tube nippers, ultrasonic leak detectors, machine condition monitoring systems and associated sub-assemblies, vibration analysers and computerized alignments systems. 45. Sub-assemblies, tools, accessories, protective coating/paint materials, stores, spares, materials, supplies, consumables for running, repairing or maintenance of the goods specified in this List. List 18 (See S. No. 230 of the Table) (1) Hot mix plant batch type with electronic controls and bag type filter arrangements more than 120 T/hour capacity (2) Electronic paver finisher (with sensor device) for laying bituminous pavement 7 m size and above (3) Slip form/fixed form paverfinisher for laying concrete pavement (4) Surface dressing equipment (self propelled) (chips spreader) (5) Slurry seal machine for filling up cracks in roads (6) Kerb laying machine (7) Mobile bridge inspection unit (8) Mechanical broom with blower (9) Toll collection and traffic control equipment (10) Electronic Total station instrument for topographic survey (11) Global Positioning System (GPS) Instrument (12) Stone crushing (cone type) plants 6 [(13) omitted] (14) Hydraulically operated self propelled piling rig with accessories (15) Hydraulically operated rough terrain self propelled 100 tons crane with telescopic boom (16) Hydraulically operated self propelled soil boring equipment with casing pipes for deep earth anchor (17) Mobile concrete pump placer of 90/120 cu m/hr capacity (18) Automatic asphalt extraction equipment (19) Fully automatic, hydraulically operated, pre-cast segment moulds (20) Hydraulic gantry crane of 100 tonnes capacity for launching truss (21) Skid steer loaders 42 [ (22) Tunnel boring machines and parts and components thereof for use in the assembly of tunnel boring machines . ] List 19 (See S. No. 231 of the Table) Omitted List 19A(See S.No.231A of theTable) Omitted List 20 (See S. No. 232 of the Table) Omitted (Lists 19, 19A and 20 has been omitted vide Notification No. 20/2007-Cus 1.3.2007) List 21 Omitted List 22 (See S. No. 239 of the Table) (1) Telephonic or telegraphic apparatus of the following description: (a) Switching apparatus for cellular mobile telephone service (b) Base station controllers (c) ATM Switches (d) Frame Relay Switches (e) Ethernet Switches (2) Apparatus for Carrier Current Line System or Digital Line System of the following description:- (a) HDSL System (b) Dense Wave Division Multiplexing (DWDM) System (c) Routers (3) Radio communication equipment including VHF, UHF and microwave communication equipment of the following description:- (a) Base Transreceivers stations (BTS) (b) Satellite communication equipment; the following customer premises equipment, namely:- (i) Radio with LNA,up converters and down converters (ii) Satellite modems (c) BTS ancillary equipment of the following description,- (i) Cellular repeaters (ii) Amplifiers (iii) Wave Guides (4) Network management stations (5) Computers for billing and customer services (6) 43 [ Short message service hardware/Voice mail service hardware ] (7) Automatic call distribution system (8) Transcoders (9) Test equipment Note :- Goods specified against item 1(a) is to be imported only by Cellular Mobile Telephone Service Licensees and Universal Access Service Providers. List 23 (See S. No. 240 of the Table) (1) Paging control terminal (2) Transmitter controller (3) Paging transmitter (4) Link transmitter/link repeater, monitor receiver (5) Link receiver (6) N+1 Arbitrators for the above, hot standby panel (7) Combiners (8) Automatic monitoring system (9) Network management control system (10) Integrated ACD/OAP system (11) Isolators (12) Cavity filters (13) Multicouplers (14) Directional power sensors (15) Communication analysers (16) Radio communication test set up, spectrum analyser, field strength meter (17) POCSAG or FLEX encoders (18) Global positioning system (19) Simul cast controller (20) Automatic call distribution equipment/system List 24 (See S.No 241 of Table) (1) Controller (Dispatch) of the following description:- (a) Network Controller, Master Controller (b) Line Conditioner for controller (c) Computer for Network Management and Control System, System Watch (d) Processor Controller Frame, Shelves (e) Network Interface Module (f) Voice Tone Module (g) Dispatch Application Processor (h) Metro Packet Switch (i) Digital Cross Connect Switch (j) Advance Packet Duplicator (k) Building Integration Timing System (2) Telephonic or telegraphic apparatus of the following description, namely;-Base Station Controllers (3) Radio Communication equipment including VHF,UHF and Microwave communication equipment of the following description, namely:-Base Transreceivers Stations (BTS) (4) Trunked Repeaters(multiple repeaters required operations)- (a) Repeaters,350/400/800Mh,20-100 Watts (b) Line Interface Module (c) Repeater Programming kit and cable (d) Extender Card, extender cable (e) Repeater Module Packing kit (5) Antenna System equipment (a) Tower top pre-amplifier (b) Bi-directional amplifier (6) Voting Equipment (a) Voter Cable (b) Audio Revert Option Kit (c) Receiver decoder module (d) SMC main site RDM (e)Receiver Voter Module (f) Remote Multiplexer Module (g) Voter Diagnostic Module (h) RDM Test Cable (i) Satellite Power Supply (j) Central demix Module (k) Voter Shell Assembly (7) Field Programming kit- (a) Radio Interface Box(RIB) (b) RIB to Repeater Cable (8) Computer for billing and customer services (9) Short Message Service Hardware (10) Automatic Call Distribution System (11) Transcoders (12) Test equipment (13) Mobile Switching Office (MSO) List 25 (See S. No. 243 of the Table) (1) Micromanipulators (2) Molecular beam expitaxy system (MBE system) (3) Chemical vapour deposition (CVD) system - Low pressure CVD (LP CVD) - Metal organic CVD (MO CVD) (4) High pressure oxidation systems (5) Lithography systems (6) Direct step on wafers / steppers (7) X-ray lithography systems (8) E-Beam mask making system (9) E-Beam direct write system (10) Mask aligners (11) Mask inspection systems (comparators) (12) Wafer scriber or Wafer slicer or Wafer sawing machine or Wafer fractures or any combination thereof (13) Die bonders or wire bonders or combination thereof (14) Wafer sawing machine (15) Leak detection system (16) Clean room air showers (17) Particle monitor / counter both air and liquid borne (18) Automatic encapsulation system, Automatic marking / branding machine (19) Clean room laminar flow air handling system (20) Ultra clean room equipment (21) Ultra high purity demineralised water treatment plant (22) PVDF welding and orbital welding machines (23) Ultra high pure (UHP) gas distribution system (24) Toxic gas distribution / monitoring system (25) Fourier Transform Infra-red (FTIR) Spectrophotometer for measuring Epitaxy Thickness, Boron and Phosphorus weight percentage (26) Parts of FTIR instrument (27) Interferometer and nano-scan meter for measuring deposited metal or oxide thickness (28) Ellipsometer for measurement of refractive thickness, thickness of layers deposited on semi-conductor wafer (29) De-Oxo purifiers and puridriers and Hydrogen, Nitrogen, Oxygen and Argon gases (30) Hydrogen, Oxygen and Nitrogen gas generators and accessories for producing high purity process gases for semiconductor wafer/device manufacture (31)Automatic lead frame loaders for semiconductor devices (32) Mercury probing apparatus and accessories for measuring oxide purity and carrier concentration of semiconductor wafers (33) Parts of mercury probing apparatus (34) Fume scrubbers for toxic process gases used in semiconductor industry (35) Apparatus for profiling and measurement of the surface including topography of semiconductor wafers and /or any layers deposited on it. (36) Mass Flow Controllers (MFC) and Source Vaporiser for various process gases used in semiconductor wafer processing (37) RF Generator for Epitaxial Reactors heating (38) Parts of RF Generator (39) Equipment used for quality control namely Burn-in Systems, moisture monitors and parts thereof (40) Tools for Moulding, Cutting, Trimming operations used in the semiconductors manufacture (41) Apparatus for the measurement of dynamic electrical parameters of Semiconductor wafer devices (42) Apparatus for measuring physical parameters of junction in semiconductor wafter (43) Automatic trim and form/die equipment for semiconductor devices (44) Electro polished SS pipes, Swagelok fittings, nupro bellows valves, manual shut-off valves, non-return valves, high purity gas and chemical filters (45) Optical pyrometer for measuring infra-red radiated temperature (46) Gas Chromatograph/Analyzer for analysing purity of process gases (47) Toxic gas monitors and Alarms (48) Milli-Volt generator for temperature profiling of diffusion furnace used in semiconductor industry (49) Curve Tracer for measurement of dynamic electrical parameters of semiconductor wafers/devices (50) Apparatus for measurement of life time carriers/Switching time for semiconductor devices (51) Contact Printer for photomask (52) Die sheer Tester (53) XRP Tester for inspection of the Moulded / Encapsulated devices for finding out the defects. (54) Trace Moisture Analyzer / Dew point analyser for measuring moisture contents in PPMS (55) UV light intensity measurement apparatus in semiconductor manufacture (56) Critical Dimension measurement system for Mask making List 26 (See S. No. 244 of the Table) (1) Omitted (2) Ferrite parts including memory cores and ferrite magnets (3) Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC (4) Connectors (5) Magnetic -Heads (all types) (6) Omitted (7) Ceramic / Magnetic cartridges and stylus (8) Omitted (9) Microphones /Microphone cartridges (10) Omitted (11) Antennas (12) Relays of contact rating upto 7 amperes (13) EHT cables (14) Level meters/level indicators/ tuning indicators/ peak level meters/ battery meter/ VC meters/Tape counters (15) Tone arms (16) Microwave passive parts (17) (i) Saw filters (ii) Ceramic filter/trap (iii) Delay lines (iv) CRT socket (v) Spark gap (18) Fibre optics and other optoelectronic parts and devices namely, Couplers, Attenuators, Connectors, Splicers, Multiplexers and Demultiplexers (19) Passive optical parts, namely, Microlens and splitters, Micropositioners, Optical filters and gratings and Phase plates (20) Special purpose optical fibres, namely, polarisation holding fibres, plastic fibres and large core fibres (21) Electron guns (22) Omitted (23) Omitted List 26A (See S.No. 244A of the Table) Omitted List 27 (See S. No. 245 of the Table) Omitted List 27A (See S.No. 248 of the Table) 1. Cell cultivation devices, namely, roller bottle systems and spinner flasks 2. CO2 incubator 3. DNA/Oligonucleotides Synthesizers 4. Electrophoresis system - (Protein DNA; 2D) 5. ELISA Reader 6. ELISA Washer 7. Fluorimeters 8. Low Temperature Freezers (minus 70 degrees and less) 9. Spectrophotometers (including Nuclear Magnetic Resonance Spectrometers) 10. Cartridges and membranes for ultra-filtration, micro-filtration, reverse osmosis, sterile filtration and viral removal 11. Cell cultivation devices like roller bottle systems, spinner flasks etc 12. Centrifuges-tubular, explosion proof, disk stack 13. DNA/Oligonucleotides Synthesizers and DNA Analysers 14. Electrophoresis system (protein and DNA; 2D) 15. ELISA washer 16. Fluorimeter 17. LC-MS machines 18. Low temperature freezers (minus 70 degree centigrade and less) 19. Micro-array equipment including scanners, micro-fluidics station, arrayers, bio analysers, micro-array chips and bio-chips 20. Proteomic Analysers and proteomic lab Systems 21. Flow Cytometer/FACs 22. Protein Purification System 23. Gel Documentation System 24. Enzyme linked immuno SPOT (Elispot) Reader System. List 28 (See S. No. 248 of the Table) (1)UV/Visible spectrophotometer, either with PDA and/or kinetics measurement and low bandwidth, (2) Preparative chromatographic system, (3) Chiral columns and other HPLC columns for specific application, (4) X-ray diffraction equipment, (5) Capillary electrophoresis, (6) Robotic sample processing system, (7) Particle size analysers, laser diffraction, lights scattering and photocorrelation spectroscopy types, (8) Atomic absorption Spectrophotometer, (9) Tensiometer, (10) Moisture balance, (11) Elemental analyser, (12) High Precision Auto titrator, (13) TOC Analyser, (14) Ion Chromatograph, (15)Spectrofluorimeter.Luminescence meter, (16) Parenteral particle counting system, (17) Particle shape analyser, (18) FT-NIR Spectrophotometer, (19)FT-Raman Spectrophotometer, (20) Spectropolarimeter, (21) Adsorption gas apparatus, (22) Freezing point apparatus, (23) Hot stage microscope, (24) Osmometer, (25) Porosity analyser, (26) Sample preparation instrument, (27) Automated sampling devices, (28) Surface area analyser, (29) Multiple organic synthesizer (30) Focussed Microwave oven for ortoanic synthesis, (31) Immersion cooling probe for 100 oc, (32) High Pressure hydrogenator, (33) Gas generators, (34) Automated dissolution test apparatus, including robotics, (35) Stability chambers conforming to ICH guidelines, (36) Rotational visco meter and Rheometer, (37) Assembly for lontophoresis studies, (38) Ultra filteration equipment, (39) Diffusion cell apparatus, (40) Densitometer, (41) Sustained release apparatus, (42) Suppository testing device, (43) Zeta potential analyser, (44) Ultracentrifuge, (45) Inverted microscope with fluorescence microscopy and photographic attachments, (46) Transilluminator, (47) Moodular protein electrophoresis apparatus (1D/2D), (48) Nucleic acid sequencer, (49) Imaging densitometer, (50) Fast-protein Liquid Chromatography, (51) U.V. Crosslinker, (52) Probe Sonicator (53) Sintillation counters (Y and B), (54) CO2 incubator, (55) Incubator shakedr for bacterial culture, (56) Polymerase chain reaction machine, (57) Cell harvestor, (58) Speed Vac, (59) Hybridizing oven, (60) Protein sequencer, (61) Confocal microscope, (62) Capillary electrophoresis, (63) Electroporator, (64) Scanning electron microscope, (65) Amino acid analyser, (66) Peptide synthesizer, (67) Phosphor imager, (68) Fluorescence activated cell sorter, (69) ELISA reader (70) Fermenter, (71) Spray drier, (72) Protein purification set up, (73) Stimulator, (74) Two channel organ bath (with two channel recorder accessories) (a) Isotonic transducer (b) Isometric transducer (c) Pressure transducer, (75) Plethymsometer, (76) Blood pressure monitor, (77) Blood pressure manual scanner, (78) Auto analyser, (79) Biofuge, (80) Passive avoidance apparatus with controller, (81) Auto stainer, (82) Microtome, (83) Cell harvestor, (84) Tissue embedding machine, (85) 4 channel auto track system, (86) Blood cell counter, (87) Blood flow meter, (88) Stereo toxic microscope, (89) Microdialysis (pull-push counter), (90) Radiotelemetric monitoring system, (91) High speed refrigerated research centrifuge, (92) pH meter (3 decimal reading), (93) Microscope phase contrast, (94) Microscope polarizing, (95) Vacuum rotary evaporators with digital display and control, different sizes, (96) Freeze drier (Lyophilizer), (97) Precision pipetting devises, (98) Refrigerated bath, (99) Low temperature circulatory bath (-33oC), (100) Magnetic stirrer with precision temperature control and digital display, (101) Thermostatic blocks (Dry bath) with or without magnetic stirring facility. List 28A (See S.No. 248A of the Table) 1. Aminoacid Analyser. 2. Analytical Balances. 3. Anemometers. 4. Anesthesia Equipment. 5. Atomic Aborption Spectrophotometer. 6. Atomiser. 7. Attrition Measurement Equipment. 8. Auto Analyser-clinical chemistry. 9. Auto Ignition test apparatus. 10. Auto radiography equipment. 11. Auto titrator. 12. Automatic cover slipper. 13. Automatic slide stainer. 14. Automatic tissue processor. 15. Ball tube distillation apparatus. 16. Basic Glove Boxes. 17. Basic Orbital and Horizontal Shakers. 18. Biolistic (Gene gun). 19. Biological Oxidiser. 20. Biopsy punches. 21. Blood Cell Counter. 22. Blood Flow Meter. 23. Blood sampling equipment's . 24. Body composition analysis equipment. 25. Bottom Top Dispenser. 26. Brookfield viscometer. 27. Butane fuel microtorches. 28. Cardiac monitors. 29. Cell lines. 30. Centrifuges and Ultra Centrifuge. 31. Chilling incubators. 32. Coating Apparatus. 33. Cnisher(tissue). 34. Crystal/freezing microtone and Ultramicrotone. 35. Densitometer 36. Differential Scanning Calorimeter. 37. Digital Boiling point/melting point Freezing point apparatus. 38. Digital Cameras. 39. Digital pH meter. 40. Digital Stroboscope. 41. Digital Temperature. 42. Controllers. 43. Digital thermometer for recording body temperature of experimental animals. 44. Direct insertion probe. 45. Disintegration Test Machine. 46. Dissolved oxygen Met~r. 47. Dry ice makers. 48. Dust generator and measurement apparatus. 49. DynO Mill.50. Electronic Top Loading Balance. 50. Electrophoresis unit. 51. Electroporator. 52. Elemental analyser. 53. Elisa reader Monoclonal antibody production equipment. 54. Encapsulation equipment. 55. Flame photometer. 56. Flash point apparatus. 57. Flask Chromatographic System. 58. Fluid Bed Drier lab model. 59. Focussed Microwave oven for organic synthesis. 60. Freeze drier. 61. Freezing point apparatus. 62. Freezing rack for metabolic cages. 63. Gas Detectors with masks, cartridges gas monitors. 64. Gel Dryer and Gel documentation and analysis system. 65. Granulator- laboratory granulator. 66. Plant Growth chambers. 67. Health monitoring equipment. 68. Heart monitors for dogs and higher animals. 69. High vacuum pumps. 70. High pressure autoclave. 71. High pressure hydrogenerator. 72. High pressure reactor-Autoclave. 73. High speed refrigerates research centrifuge. 74. High throughput organic synthesizer, High throughput biological screening equipment. 75. Hybridizing oven. 76. Image Analyser and Imaging Densitometer. 77. Implantable Plant . 78. Incubators. 79. Inductive coupling plasma equipment. 80. Infrared temperature sectos. 81. Inhalation chambers with accessories. 82. Inverted microscope with flurosence microscopy with photographic attachement. 83. Laser particle size analyser, Particle shape analyser, Surcface area analyser. 84. Liquid scintillation counter. 85. Low Temperature Circulation Bath. 86. Micro and Micro Soxlet Extractors. 87. Miscroscope and Microtome blades disposable. 88. Reaction colorimeter. 89. Otoscopes. 90. Peristaltic pumps. 91. Phototachometer. 92. Polorimeter. 93. Porometer and Porosity analyser. 94. Potentiometer. 95. Precision vacuum contractor. 96. Probe sonicator. 97. Protein purification machine. 98. Radiodetector, Radiommunoassy equipment, Gamma counter for hormonal assay. 99. Refractometer and Rotary evaporators. 100. Rheometer. 101. Rotary microtomes, Rotary evaporators. 102. Silverson homogeniser. 103. Spectrofluorimeter Luminescence meter. 104. Spheriodizer. 105. Spinning band distillation apparatus. 106. Spray drier. 107. Submersible Magnetic Stirrer. 108. Super critical fluid chromatography systems. 109. Sustained release apparatus. 110. Syringes. 111. Tattooing instrument. 112. Tintometer. 113. Tissue embedder. 114. Transilluminator. 115. Zetta poteltial analyser. 116. Ultrasonic cleaners. 117. Oscilloscope. 118. Ultrafilaration equipment. List 29 Omitted List 30 (See S. No. 250 of the Table) (1) Singeing machine (2) Fabric reversing machine (3) Yarn drying machine (4) Volumetric/Gravimetric measurement liquid chemical station (5) Lab dye preparation machine (6) Lab infra Red Drying Machine (7) Continuous weight reduction machinery through microwave technique (8) Kier decatising/continous decatising machine (9) Solvent scouring machine (10) Blanket Fringing Machine (11) Raising/Brushing Machine (12) Circular Knitting Machine (13) Industrial Sewing machine (14) Single needle bed drop feed lockstitch machine (15) Single needle lockstitch flat bed machine (16) Single needle flat bed drop feed lockstitch machine with speed more than 3500 stitches per minute (17) High speed twin needle feed lockstitch machine (18) High speed two needle lockstitch machine (19) Computerised multineedle lockstitch/chainstitch machine (20) Single needle lockstitch machine with built in trimmer (21) Blind stitch machine of various models (22) Single needle drop feed chainstitch machine (23) Two needle chainstitch or lockstitch machine (24) Chainstitch overedging machine (25) Two or three needle chainstitch machine (26) Two thread chainstitch for high speed seaming and banding operation with gear driven pulled feed/compount feed of speed 3500 stitches per minute and above. (27) Safety stitch machine. (28) Power driven flat bed knitting machine (29) Computerised flat bed knitting machine (30) Power operated flat lock/overlock machine (31) Linking machine (32) Loop making machine (33) Power driven socks knitting/gloves knitting machine. (34) Whole garment making machine (knitted) (35) Plain stitching machine with more than 3500 stitches per minute (36) Computerised plain stitching machine with more than 3500 stitches per minute (37) High speed needle feed two needle flat bed industrial sewing machine. (38) Sewing machine zig-zag flat bed (39) High speed multiple needle sewing machine (40) Class feed of the arm industrial sewing machine. (41) Button hole sewing machine (42) Button stitch sewing machine. (43) Elastic inserting machine (on a variety of garments) (44) Belt attaching machine (45) Zip attaching machine (46) Bar tacking machine (47) Hemstitch machine (48) Smoking machine (49) Power driven cloth cutting machine. (50) Band knife cutting machine (51) Collar turning and blocking machine and cuff turning and blocking machine. (52) Cuff press (53) New automatic collar turning machine (54) Automatic pocket welt sewing machine or Automatic pocket welting machine (55) Pocket creasing machine (56) Embroidery machine with 10 heads and above (57) Computerised embroidery machine (58) Printing and curing machine (59) Quilting machine (60) Snap fasterns fixing machine and/or siwa thereof (61) Thread cleaning machine (62) Steam Press (63) Portable boiler for steam press (64) Steam Cabinet (65) Vaccum table (66) Fusing press (67) Dry to Dry cleaning machine (68) Stain/spot removing machine/gun (69) Automatic 25-needle shirring/smoking machine (70) Shirt folding machine (71) Form finisher (72) Collar contour trimmer (73) Spreading machine (74) Shoulder pad attaching machine. (75) Shrinkage controlling machines for knitting fabrics (76) Loopdrivers for tubular knitted fabrics (77) Mercerising machines for tubular knitted fabrics (78) Singeing machines for tubular fabrics. (79) Pile cutting machines for knitted fabrics (80) Rotating edging machine for fabric rolls (81) Conveyors for garments (82) Garment Calendering machine (83) Tie making machines (84) Labelling machines (85) Laying and cutting machines (86) Button and Rivet fixing machine (87) Weft straightening and calendering machine (88) Slit Opening Machine (89) Lab Yarn dyeing machine (90) Lab dyeing machine (91) Lab pressing machine (92) Automatic cone winding machine with yarn splicer and auto doffing system (93) Drawing in machine (94) Computer aided design system (95) Fully automatic grey fabric inspection machines with roll to roll winding having microprocessor recorder (96) Colour matching computer (97) High speed Intersecting Rotary/Chain/Pin Drawing Sets/Gill Boxes (98) Rectilinear Combs (99) Draw Frame/Roving Frame/Automat Rubbing Frame/Bobbiners/Finishers, for use in woolen textile industry. (100) Ring frames from 60 MM Ring Dia and above, for use in woollen textile industry (101) Ring Frames with Siro Spinning attachment/Auto Doffers having maximum 75 MM Ring Dia, for use in woollen textile industry (102) Shearing, polishing and cropping machines (103) Step cleaner (104) (Flax hackling machine (105) Drawing machine for Flax (106) Roving machine for Flax (107) Wet ring frame for Flax (108) Auto winding machine for Flax (109) Continuous spinning machines for Viscose Filament Yarn. (110) Digital electronic frequency inverters for spinning machines including control boards (111) Finishing oil metering pumps with relevant feed system (112) Metering gear pumps for Viscose (113) Portable systems for injection of pigments for viscose dope complete with stirred vessel, metering pumps, instruments and control panel (114) Precious metal spinnerettes including distribution plates (pre-spinnerette) (115) Spin bath degassinag plant by flash evaporation (116) Spin bath backwash filtration system with candle filters (117) Continuous dissolving and homogenisisng system for viscose preparation (118) Contidisk filters for viscose (119) Spinbath heat exchanger in graphite List 31 (See S.No. 251 of the Table) (1) Effluent treatment unit with biopaq reactor, activate sludge process, activated carbon, ultrafiltration ozonisation facilities (2) Combined contipress/decatising machine (3) Effluent treatment unit with automatic sensing devices, automatic controlled chemical dosing, dissolved air floatation (DAF), reverse osmosis, sludge dewatering, decanters, ultrafilters, vacuum filters to deliver water for reuse. (4) Hydraulic Flat Paper Press/continuous Hydraulic Flat paper Press/Rotary Press (5) Fully fashioned high speed knitting machine (6) Computerised Pattern maker/ Pattern grading/marker (7) Computerised embroidery pattern-making machine with plotter (8) High Speed Warping machine with yarn tensioning, pneumatic suction devices and accessories (9) Shuttleless loom (air jet, water jet, rapier and projectile and narrow width high speed needle) (10) Beam knotting machine (11) Auto control type humidification plant (12) Carding Sets, for use in woollen textile industry. (13) Yarn/ Fabric mercerising machine (14) Continuous bleaching plant (15) Omitted (16) Wet fabric spreading and squeezing machine (17) Relax drum/conveyer drying machine (i) Drying range (ii) Float dryer (iii) Loop dryer (iv) Drum dryer (v) Jet dryer (vi) Rapid dryer (18) Compacting Machine (19) Computer controlled HTHP yarn dyeing machine (20) Soft package winders (dye package winders) (21) Automatic dye weighing and dispensing system (22) Open width Tubular inspection machine (23) Fastness testing equipment (24) Shrinkage testing equipment (25) Indigo dyeing range with/without sizing plant (26) Computer colour matching equipment (27) High speed computer control padding mangle (28) Powder dot coating machine (29) Laser engraver or inkjet engraver (30) Pre-shrinking range for flat and Knitted goods (31) Knit-tubular mercerising or bleaching-cum-mercerising machine (32) Auto flame controlled, width controlled singeing machine for flat and Knitted fabrics (33) Milling and scouring machine (34) Shearing and Polishing machine (35) Kier Decatising/Decatising machine (36) Combined Contripress / Decatising machine (37) Auto fabric detwister (38) Rotary/Flat bed screen printing machine (39) Curing/Polymerising machine (40) Continuous rope/open width washing machine (41) Open width continuous dyeing range (42) Soft flow dyeing machine (43) Jet dyeing machine List 32 (See S. No 252 of Table) (1) Automatic reeling machinery for reeling of silk consisting of continuous hot air drier(conveyer type), continuous cocoon boiling machine(conveyer type) and automatic reeling machine with re-reeling (2) Silk weaving and twisting machines consisting of hank-to-bobbin cone winders, silk doubling machine and Electronic jacquard weft knitting machine (3) Arm dyeing machine for hank degumming dyeing (4) Hank dryers (continuous type) (5) Silk felt calender (6) Clip stenter (7) Silk calender (8) Silk decasting machine (9) Overflow machine for silk fabric dyeing (10) Cone-chees degumming and dyeing machine (11) Beam dyeing machine for silk fabric (12) Semi-automatic screen printing machine (13) Loop agers (14) Design studio equipment (15) Colour kitchen equipment (16) Colour matching computer List 32A (See S.No. 252A of the Table) (1) Machinery for coffee plantation sector, namely:- (i) Coffee grinder intended for industrial use, falling under tariff item 8479 82 00 (ii) Coffee roasting machine intended for industrial use, falling under tariff item 8516 79 90 (iii) Power weeding machine, falling under tariff item 8433 11 90 (iv) Coffee processing machine (pulping, cleaning, sorting grading), falling under sub-heading 8433 60 (v) Sprayer, falling under tariff item 8424 81 00 (vi) Coffee packaging machine falling under tariff item 8422 30 00 (vii) Coffee bagging machine falling under tariff item 8422 30 00; 7 [(viii) Mechanical harvester falling under tariff item 8433 59 00] (2) Machinery for tea plantation sector, namely:- (i) Tea bagging machine, falling under tariff item 8422 30 00 (ii) Tea packaging machine, falling under tariff item 8422 30 00 (iii) Color sorting machine, falling under sub-heading 8433 60 (iv) Tea leaf cutting-rolling machine, falling under tariff item 8438 80 40 (v) Mechanical harvester, falling under tariff item 8433 59 00 (vi) Tea pruning machine, falling under tariff item 8201 60 00 (vii) Mist blower, falling under tariff item 8414 59 20 (viii) Sprayer, falling under tariff item 8424 81 00 (ix) Rotary shifter falling under sub-heading 8433 60 (x) Lateral cyclon winnower falling under sub-heading 8433 60 (xi) Dividing bypass falling under sub-heading 8438 80; (3) Machinery for rubber plantation sector, namely:- (i) Slab cutter, falling under tariff item 8477 80 90 or 8486 20 00 (ii) Shredder, falling under tariff item 8477 80 90 or 8486 20 00 (iii) Solid pump vibrating screen, falling under tariff item 8413 70 96 (iv) Plastimeter/PRI ageing oven, falling under tariff item 8486 10 00, 8486 20 00 or 8514 10 00 (v) Mooney viscometer, falling under tariff item 9027 80 10 (vi) Latex centrifuge, falling under tariff item 8421 11 00 (vii) Mechanical stability time apparatus, falling under tariff item 9024 80 99. List 33 - Omitted List 34 (See S.No.257 of the Table) (1) Air blast dust removing machine (2) All types of staking machines except slocum (slow combing process) (3) Automatic Drying machine (4) Automatic Lacing machine (5) Automatic Leather Perforating and/or Punching machine (6) Automatic Lock-Stitching Cylinder Bed Bartacker (7) Automatic machine to control, to slant and to glue leather straps (8) Automatic Milling machine (9) Automatic Milling-Boring Machine (10) Automatic or semi-automatic hydraulic press (750 tonnes or more) (11) Automatic Padding machine (12) Automatic Spraying machine (13) Automatic Tacks - Reinforce machine (14) Automatic Work Unit for assembling the complete Insole (15) Back Part Moulding machine (16) Band-saw with or without Flier (17) Bandknife Splitting machine (18) Belt Punching and cutting machine (19) Bobbin machine with counter (20) Boot leg ironing machine (21) Bottom Leather Grain Crack Tester (22) Bottom roughing and/or scouring machine (23) Box Stamping machine (24) Buckle Stappling machine (25) Button Hole (Eyelets end) machine (26) Button Sewing machine (27) Button stitch / Sewing machine (28) Cementing machine (29) Cementing machine and cementing gun (30) Chain Slotting machine (31) Channel Closing machine (32) Channelling and Grooving machine 8 [(33) Clicking Board levelling/ Planing Machine (34) Clicking machine/cutting press ] (35) Clicking Machine Hydraulic (Bottom) (36) Coloriemeter (37) Column Boring machine (38) Computerised Sewing Machine (39) Computerised Skiving machine 9 [(40) Conveyor System; including conveyors for heat setting, cold setting, with or without vacuum ] (41) Counter Cementing Machine (42) Counter Moulding machine (43) Counter Tightening machine (44) Coupling and edge pre-trimming machine (45) Crimping machine (46) Crumpling and embossing machine (47) Curtain coating machine (48) Cylinder Bed Sewing machine (49) Die Bending machine (50) Double Band Cleaning machine (51) Dust removing machine-pneumatic/hydraulic (52) Dyeing machine (53) Edge buffing machine (54) Edge Inking machine (55) Edge Pre-Trimming machine (56) Edge Setting machine (57) Edge Trimming machine (58) Elastic inserting machine on variety of garments (59) Electrical machine for cutting and slanting straps (60) Electro pneumatic weaving machine for leather (61) Electronic skin assessor (62) Embossing Plates for Press for leather printing (63) Engraved rollers for Press for leather printing (64) Evening and Roughing machine for Soles and Insolses (65) Fibre Board Flexing machine (66) Fine Turn machines for Lasts (67) Finish Sheet Resistance Tester (68) Finishing Machine for Lasts (69) Fixed Head/Travailing Head Clicking Cutting machine (70) Flat Bed Double Needle Sewing machine (71) Flat Bed Single Needle Industrial Sewing machine with or without trimer (72) Folding machine for brief cases and other leather products (73) Folding machine for sides for Brief Case (74) Forepart conditioning machine (75) Frame Fixing/Frame Folding machine (76) Fusing presses 10 [(77) Halogen and adhesive/film application machine ] (78) Hand Operated Press for Inserting Perforation Tubes and Prickers (79) Heat Setting plant (80) Heat transfer press (81) Heel and Sole Brushing machine (82) Heel and Sole Buffing machine (83) Heel Attaching machine (84) Heel Breast Cementing machine (85) Heel breast roughing machine (86) Heel Breasting machine (87) Heel Building machine (88) Heel Covering machine (89) Heel Molder Flanger (90) Heel Nailing machine (91) Heel profiling machine (92) Heel seat and side lasting machines (93) Heel Seat Cement Lasting machine (94) Heel Trimming / pretrimming / Cupping or combined machine (95) High Speed Corner Stitching machine (96) Hole punching machine (97) Hot Melt Applicators (98) Humidifier for Uppers (99) Hydraulic / Pneumatic sammying and /or setting machine (100) Hydraulic automatic plating ironing machine (101) Hydraulic Bending machine (102) Hydraulic Fleshing machine (103) Hydraulic Ironing and Embossing Press (104) Hydraulic Scudding machine (105) Hydraulic Setting machine (106) Hydraulic Shaving machine (107) Hydraulic Shearing machine (108) Hydraulic Splitting machine (109) Hydraulic Sulphide applicator 11 (110) Injection moulding of PVC/TPR/EVA soles, inserts and half soles ] (111) Injection Moulding press to produce Plastic shoe Lasts (112) Insole Attaching machine (113) Insole Backpart Stiffener Tester (114) Insole Bevelling machine (115) Insole Covering machine (116) Insole moulding machine 12 [(117) Ironing and conditioning machine including chill setter machine ] (118) Kamborian Lasting machine (119) Knife Grinding machine (120) Knife making equipment for cold steel and forged steel (121) Label stitching machine (122) Last Turning machine (123) Lastometer (124) Leather buffing machine (125) Leather cover cutting machine for Heels (126) Leather Polishing machine (127) Leather rolling machine (128) Lining roughing machine (129) Lining Trimming machine (130) Loop closing machine (131) Loose / Nailing machine (132) Manual loop cutter (133) Mckay Stitching machine (134) Milling machine for shoe Uppers (135) Moccasin Lining Trimming machine 13 [(136) Moccasin performing machine ] (137) Motorised hides and skins stamping machine (138) Moulds for rubber sole direct vulcanising press and PVC direct injection soling machine (139) Multiple Row Upper Chain Stitching machine i.e. 3 Rows and above (140) Three Needles for Small Arm Cylinder machine for Multiple Row Stitching (141) Outsole Stitching machine (142) Paste drying unit (143) Pattern binding machine (144) Pattern corner cuting and binding machine (145) Pattern Grading machine (146) Pattern making machine (147) Pattern Perforator (148) Pattern Plan (149) Pattern scanner (150) Pattern Scanning machine 14 [(151) Piping making machine with trimming and embellishment fixing machines ] (152) Plan Computer Controlled Nesting System (153) Pneumatic Broaching machine (154) Pneumatic control moulder machine for buckles (155) Pneumatic fusing machine for ironing fusible interlining (156) Polishing machine (157) Polyshanking machine 15 [(158) Polyurethane/PVC/TPR and EVA sole, insole, midsole, heel, heel tip injection moulding machine (single or multiple station) ] 16 [(159) Fore part lasting machine ] (160) Post Bed Double Needle Sewing machine (161) Post Bed Single Needle Sewing machine (162) Post Bed Single Needle under Edge Trimming (163) Pounding or beating or ironing machine or combination of such machines (164) Pre-lasting conditioner (165) Preparing and polishing machine (166) Pulling Over and Cement Lasting machine (167) Pulling Over Machine (168) Punches for model room (169) Punches of all varieties (170) Punching and / or eyeletting machine 17 [(171) PVC/PU/EVA direct injection soling machine (DIP construction) ] (172) Quilting machine (173) Raised Cord Sewing machine (174) Reactivating Plant for Shoe and Soles (175) Recessing and Roughing Soles machine (176) Recessing Welt machine (177) Rotary Collection Unit (178) Rotary Pigment Coating machine (179) Rotary Printing machine (180) Rough Turn machine for lasts (181) Roughing machine for Plastic Blocks (182) Roughing machinery for upper or soles or insoles (183) Rubber sole direct vulcanising press (DVP construction) (184) Satra Plan and Knife search 18 [(185) Scissors type and nibbling type machines for plates ] (186) Scouring and Blending machine (187) Screwing machine (188) Seam Ironing machine (189) Sectioning machine (190) Sewing machine Cylinder Bed (191) Sewing Machine for Ruffled Work and Genuine Mocassin (192) Sewing Machine Zig Zag Flat Bed (193) Shank / Sole / Counter reducing machine (194) Shank Rivetting machine (195) Shears for cutting pattern (196) Shears for Iron Bars (197) Side Lasting machine (198) Sidewall Roughing machine (199) Skiving machine (200) Slike Fastener Fatigue Tester (201) Snap fasteners fixing machine with or without dies therefor (202) Sole / Heel / Seat Roughing machine (203) Sole Edge Recessing / Shapping machine (204) Sole Levelling machine (205) Sole Stamping / Embossing machine (206) Soling Material Abrasion machine (207) Spiral Cutting machine/ Cutting Press (208) Spray Booths (209) Stamping machine for Upper / Lining / Socks (210) Steam Toe Press (211) Stich Marking machine (212) Strap / Strip Cutting machine (213) Strap Folding machine (214) Stretching and drying machine with or without conveyor and toggles (215) String Lasting machine (216) Strobel type stitching machine (217) Studs Attaching machine (218) Suit Case Stitching machine (219) Tack heel seat lasting machine (220) Tack Lasting machine (221) Tack Side lasting machine (222) Tanning and colouring drums 19 [(223) Taping and seam rubbing machine ] (224) Testing Equipments, namely :- Flexometer / Upper material flexing machine, Tensometer/ Lastometer, Permeometer/ Upper leather water proofness tester, Penetrometer / Bottom Leather water penetration machine, Finish rub fastness tester, Upper leather abrasion resistance machine, Dome plasticity apparatus, Finish fleat resistance tester, Adhesion of finish tester, Leather shrinkage temperature determination apparatus, Wrinklometer, Bottom Leather grain crack tester, Electronic moisture meter, Dyeing and fumbling machine for laboratory, fibre board flexing machine, State of cure apparatus, Ross Flexing machines, Soling materials abrasion machine, Heel fatigue tester, Heel impact tester, Centilever tensiometer, Viewing box for assessing visible damage, Slide fastener fatigue tester, Insole backparts stiffness tester, shoe flexing machine, Break / pipness scale, Sole Adhesion tester, Safety Footwear impact tester, Rapid tear tester, Needle holding jig, Shoe lace adhesion machine (225) Thermo cementing and folding machine (226) Toe Cap Applicator Thermoplastic (227) Top Lift Slugging machine (228) Transfer Arm (229) Trimming/milling machine with or without polishing device (230) Twin Needle, needle feedlock stitch sewing machine (231) Twin Sole Attaching machine (232) Two Needle Lock Stitching machine (233) Unlasting machine (234) Upper Cementing machine (235) Upper Edge Inking machine (236) Upper Embossing machine (237) Upper Folding machine (238) Upper Forming machine (239) Upper Perforating machine (240) Upper Reinforcing machine (241) Upper Seam Rubbing / Beating machine (242) Vaccum Drying machine (243) Vaccum forming machine for last with vaccum pump (244) Vice for holding pattern (245) Vision Lasting System for Toe Lasting machine (246) Vulcanizing Press (247) Welt (Rand) Attaching machine (248) Aquamix for use in Tanning industry (249) Prodomix for use in Tanning industry (250) Microtan / Computan for use in Tanning industry (251) Pneumatic press for engraving and marking (252) Pneumatic staple gun for stapling insoles, heels and uppers 20 [(253) Stapling machine for bows to uppers of leather shoes ] (254) Lighting assessment cabinet (for checking colour under different light conditions) (255) CAD/CAM equipment for shoe desgining and pattern engineering including software 21 [(256) Bias tape cutting machine ] (257) Spiking machine (258) Airhood with grinder (259) Sock liner press (260) Box folding machine (261) Outsole plates 22 [(262) Dust collector and exhaust systems ] (263) Shoe box making machine (264) Splitting machine (fitted with electronic and computer devices, etc.) (265) Moulds for footwear (266) Colouring/painting machines for soles and heels (267) High frequency welding/cutting machines for uppers and insoles (268) Degreasing/ cleaning machine for polyurethane soles (269) Strap fitting machine (270) R P box strapping machine (271) Dies for canvas shoes (272) Dies for soles and straps for footwear List 35 (See S. No.283 of the Table) (A) Wireless Apparatus and accessories - (1) HF, VHF, or UHF transreceiver (combination of transmitter and receiver) meant for amateur frequencies with accessories in assembled or kit form (2) VHF/VHF or VHF/UHF Repeater (combination of transmitter and receiver) meant for amateur frequencies with accessories in assembled or kit form (3) Transvertor for amateur frequencies in assembled or kit form (4) Grid Dip Oscillator, Radio Frequency Interference Filter, Balun Transformer, SWR bridge or reflectometer, Morse reader or Noise bridge (5) Antenna with or without feeders/Antenna rotators for amateur frequencies (6) Digital Frequency counter (upto 600 MHz) with accessories (B) Parts - (1) Transistors, diodes, integrated circuits/ chips, thermionic valves or vaccum tubes (2) Toroidal cores, quartz crystals, relays, rotatory switches, ferrite beads (3) Variable condensers, air-dielectric type (4) Precision capacitors (fixed type) value (s) between 1pF to 5000 pF (5) Spare nicad cells or pack, as required or used with thermionic valves or vaccum tubes or toroidal cores (in the case of hand held transreceiver) (6) Slow motion tuning mechanism with or without dials. List 36 Omitted 28 [List 37 Omitted List 38 Omitted List 39 Omitted List 40 Omitted] List 41 (See S. No. 370 of the Table) (A) (1) Braille writers and braille writing instruments (2) Hand writing equipment Braille Frames, Slates, Writing Guides, Script Writing Guides, Styli, Braille Erasers (3) Canes, Electronic aids like the Sonic Guide (4) Optical, Environmental Sensors (5) Arithmetic aids like the Taylor Frame (arithmetic and algebra types), Cubarythm, Speaking or Braille calculator (6) Geometrical aids like combined Graph and Mathematical Demonstration Board, Braille Protractors, Scales, Compasses and Spar Wheels (7) Electronic measuring equipment, such as calipers, micrometers, comparators, gauges, gauge blocks Levels, Rules, Rulers and Yardsticks (8) Drafting, Drawing aids, tactile displays (9) Specially adapted clocks and watches (B) (1) Orthopaedic appliances falling under heading No.90.21 of the First Schedule (2) Wheel chairs falling under heading No. 87.13 of the First Schedule (C) Artificial electronic larynx and spares thereof (D) Artificial electronic ear (Cochlear implant) (E) (1) Talking books (in the form of cassettes, discs or other sound reproductions) and large-print books, braille embossers, talking calculators, talking thermometers (2) Equipment for the mechanical or the computerized production of braille and recorded material such as braille computer terminals and displays, electronic braille, transfer and pressing machines and stereo typing machines (3) Braille paper for the production of braille books (4) All tangible appliances including articles, instruments, apparatus, specially designed for use by the blind (5) Aids for improving mobility of the blind such as electronic orientation and obstacle detection appliance and white canes (6) Technical aids for education, rehabilitation, vocational training and employment of the blind such as braille typewriters, braille watches, teaching and learning aids, games and other instruments and vocational aids specifically adapted for use of the blind (7) Assistive listening devices, audiometers (8) External catheters, special jelly cushions to prevent bed sores, stair lift, urine collection bags (9) Instruments and implants for severely physically handicapped patients and joints replacement and spinal instruments and implants including bone cement; List 42 Omitted List 43 (See S. No. 401 of the Table) 1 Tarapur Atomic Power Plants -3 and 4 (Maharashtra) - 1000 MW 2. Kudankulam (Tamil Nadu) - 2000 MW 3.Kaiga - 3 and 4 (Karnataka) - 440 MW 31 [(4) Rajasthan Atomic Power Project- Units 5 and 6 (Rawatbhata) - 440 MW, Units -7 and 8 (Rawatbhata) of 1400MWe ] 5. Prototype Fast Breeder Reactor (Kalpakkam) -500 MW. 32 [(6) Kakrapar Atomic Power Project-Units 3 and 4 (Kakrapar) of 1400 MWe. ] List 44 (See S. No. 424 of the Table) 1. 765 KV Transformers; 2. 765 KV Reactor; 3. 765 KV Circuit Breaker; 4. 765 KV Isolators; 5. 765 KV Current Transformer; 6. 765 KV Capacity Voltage Transformer; 7. 765 KV Surge Arrestors; 8. INVAR/ACSS Conductor for high temperature application; 9. 765 KV Polymer Long Rod Insulators 10. Emergency Restoration System (ERS) for extra-high voltage transmission Line; 11. Overhead Optical Ground Wire (OPGW), including hardware and accessories such as Vibration Damper, Joint Box, Suspension and tenslon clamps; 12. High VoltageDC Divider and CT; 13. High VoltageDC Reactor; 14. High TRV Circuit Breaker for High VoltageDC application; 15. Protective Spark Gap and Damping Equipment for Thyristor Controlled Series Compensator (TCSC)/ Fixed Series Compensator (FSC); 16. Thyristor Controlled Series Compensator (TCSC)/ Fixed Series Compensator (FSC) MOV for Series Compensation; 17. Optical Current Transformer; 18. 400 KV Extra High Voltage Cables; 19. Gas Insulated Switchgear equipment for 220 KV and above; 20. Thermo Vision Camera; 21. On-line Puncture insulator detector; 22. Hot line Kits and Tools for transmission line live maintenance; 23. Hot line washing equipment for insulators. List 45 (See S. No. 425 of the Table) Textile machinery for man-made fibre and yarn industry:- (1) Machinery for continuous polymerization plant: (a) Polymerizing equipment, including esterification reactor, vapor separator, prepolymerization reactor, polymerization reactor, static mixers, polymer pumps and automatic chipping system, pre-polyester pumps, spray condensers, probe assemblies, vacuum pumps, vacuum equipment such as ejectors, jacketed valves and jacketed control valves, pre-poly filters, mechanical seals and cooling system of polymerization reactors (b) Slurry and additive preparation system, such as high shear agitators, mill feed pumps, filters and injection systems for additive and slurry pumps; (c) HTM (Heat Transfer Medium) and heating system, HTM pumps; (d) PTA conveying system, including container unloading platform and rotary feeders; (e) Polymer transfer line equipment, including polymer coolers and jacketed polymer pumps, tandem drives on-line master batch and additive injection system; (f) Solid state polymerization equipment, including pre-crystalliser, crystalliser and rotary feeders; (g) Process control equipment, including viscosity measuring equipment (Viscometer) and, Distributed control system; (h) Atomic absorption spectrometer, X-ray fluorescence spectrometer; (i) Extraction tower with accessories like centrifugal dehydrator and blower; (j) Chip conveying system and accessories like blowers, filters and rotary and screw feeders; (k) SolidState polymerization system including blowers and nitrogen plant; (l) Crushing and melting system for caprolactum; (m) V.K. Tube; (n) Screw Feeder; (o) Centrifugal dehydrator; (p) Drying Tower; (q) Circulating Blower; (r) Fuel Oil Bowler; (2) Machinery for synthetic fiber plant: (a) Spinning equipment, including manifold spinning beams, pre-heating ovens and finish applicators; (b) Polymer transfer line, including extruder, color blender and continuous polymer filter (CPF), Polymer Valves; (c ) Draw-off equipment, including take-up equipment, thread cutters and aspirators, spin defect detectors, draw off unit, tow guide equipment, lace-up or suction gun and tow suction unit, traversing unit; (d) Draw line (Fibre line), including creel, tow guide stand, draw frames, drawing bath, heat set calender/thermosetting/annealer unit, tow assembler, draw-off unit, tensiometer roll, steam box, crimping machine, spray box, tow guide system, cable dryer, tow cutter and grinding machine and tow cutter reels; (e) Hydraulic baling press, strapping machine, dock levelers and automatic bale handling equipment; (f) Process control equipment, including precision anemometer, thermohygrograph, aspiration psychrometer, ultrasonic cleaning unit, spinneret inspection system, infrared pyrometer, optical temperature measuring instrument, pack cleaning equipment with hydrolysis and vacuum pryolysism and pack press; (g) Textile laboratory equipment for fibre testing, including favimat, fafegraph HR, coring machine, stereo microscope, crimper tester, fibre shrinkage tester, refractometer, conductivity meter; (3) Machinery for synthetic filament yarn plant: (a) Spinning equipment, including manifold, spinning beams and pre-heating ovens; (b) Polymer transfer line, including extruder, color blender and continuous polymer filter (CPF); (c) Take-up equipment, including take-up frames, oil application unit, godet rollers, yarn guides, thread cutters and aspirators, lace-up/suction gun, take-up and draw winders; (d) Packing and automation equipment, including automatic doffers, automatic bobbin storage and handling system; (e) Draw texturising machine, including creel, intermingling jets, ceramic guides, doffers; (f) Textile laboratory equipment for yarn testing, including automatic tensile tester, projection microscope, denier skein reel, entanglement tester, denier auto count, dynafil, uster tester, online finish checking instrument. (4) Other capital goods for synthetic fibre/yarn industry: (a) Spin draw winding machine; (b) Spindles; (c) Yarn guides; (d) PSM Rings; (e) Ballon Control Rings; (f) Travellers; (g) Extruders; (h) Extruder barrel; (i) Online filamentation detector; (5) Machinery for Regular/HWM Viscose Staple Fibre Plant: (a) Sintered Filter Media; (b) Automatic High Speed centrifugal separator; (c) Fibre production lines; (d) Fibre Cutter; (e) Fibre Dryer; (f) Pneumatic Fiber Fidders; (g) Baling Press; (h) Plate Heat exchanger; (i) Graphite heat exchanger; (j) Neno filtration plant; (6) Machinery for Lyocell Fiber Plant: (a) High viscosity handling equipment including pulper; (b) Reactor for cellulose dissolution; (c) Thin film evaporator with accessories; (d) Spinning module; (e) Air quenching systems and associated control systems; (f) Fiber washing and treatment machines; (g) Baling Press; (7) Process and quality control equipment for artificial man-made cellulosic fibre/yarn industry: (a) Robotic Fiber sampler; (b) Spectrophotometers for fiber color evaluation; (c) Automatic absorption spectrophotometer; (d) X-ray phloroscence spectrometer; (e) Automated oil pick up analyzer; (f) Automated titrator; (g) Textile laboratory equipment for testing of fiber properties such as denier, tenacity, elongaton, spinning fault, UV value and microscope with fibre imaging system; (8) Omitted (9) Omitted (10) Machinery for Viscose Rayon Filament Yarn/ Rayon Tyre Yarn: (a) Twin rolls press; (b) Ageing Drum Hopper; (c) Blowers and Fans for Alkali Cellulose Transport system; (d) Slorry Pumps including VFDs; (e) Automatic Pulp handling system; (f) Simplex/Churn; (g) Plate and Frame Filter Press; (h) Viscose Pumps (Gear/Screw Pumps including VFDs); (i) Evaporator; (j) Heat Exchager- Hastalloy Plate and Frame Type; (k) Crystallizer; (l) Vacuum System - Ejectors, Boosters, Vacuum Pump and Vacuum Filter; (m) Auto bagging and weighing system; (n) Sand Filters; (o) Centrifugal Pumps including VFDs; (p) Pot Spinning Machine; (q) Spinning Pots and Pot Motors; (r) Metering Gear Pumps for Viscose; (s) Automatic cake wrapping system; (t) Air Splicer for Knotting Yarn; (u) Automation for Cone Weighing and Cone Doffing; (v) Auto Cone Packing and Palletizing; (w) Environment Monitoring like Gas Monitors for Carbon-di-Sulfide (CS 2 ), Hydrogen Sulfide (H 2 S) Sulfur Dioxide (SO 2 ); (x) BOD and COD Monitors; (y) Textile Laboratory Equipment for Yarn testing namely, Universal Computerised automatic Tensile Tester and Denier Tester; (z) Gas Chromatography and Mass Spectrometer. (11) Other machinery for man made fibre and yarn industry: (i) Pulp slurry with automatic slurry control systems (ii) Alkali Cellulose Cooler-Fluidized with automatic temperature control (iii) Press Lye Filter (iv) Xanthator with automation (v) Rough and Fine Grinders for Viscose (vi) Viscose Filters (vii) Viscose deaerators (viii) Color slurry injection pumps (ix) Slurry homogeniser system (x) After treatment line for washing fibre, conveying of fibre and chemical treatment (xi) After treatment chemicals filtration system (xii) Pneumatic fibre squeezing system (xiii) Wet fibre opener (xiv) Dry fibre opener (xv) Online fibre contamination and removal system (xvi) Automatic bale handling system (xvii) Bale inspection system (xviii) Automatic candle filters for spin bath filtration (xix) Dry condensing system for low pressure vapour removal in evaporators, crystallisers and viscose deaerators (xx) Low temperature multi effect distillation (LT-MED) system and mechanical vapour compression for effluent treatment by water desalination process (xxi) Electrical protecting devices and relays falling under tariff item 8536 49 00 (xxii) Flame proof motors falling under tariff item 8536 90 90 (xxiii) Process monitoring and control equipment falling under tariff item 8538 10 10 (xxiv) Distributed control system falling under tariff item 8537 10 10 (xxv) Precision gear pumps for highly viscous polymers (xxvi) Hydraulic screen changing type continuous filters for viscous polymers (xxvii) Static mixers for high viscosity polymers (xxviii) High pressure stainless steel micro spinnerettes (less than 80 micron hole size) for high viscosity polymers (xxix) High efficiency fibre dryer for lyocell fibres (xxx) High capacity fibre openers suited for lyocell fibres (xxxi) Solvent purification system including ion exchange and membrane based systems falling under tariff item 8445 19 30 (xxxii) Energy efficient multi staged evaporators/distillation columns for solvent recovery falling under tariff item 8445 19 30 (xxxiii) Open end spinning machine (xxxiv) Autoconer (xxxv) Uster Tensorapid (xxxvi) Positive rapier loom (xxxvii) Jacquard List 46 (See S. No. 426 of the Table) (A) Sewing machines with in-built motors, falling under tariff item 8452 29 00 (B) Machinery for garment sector, namely:- (1) Garment sand blasting or brushing machine; (2) Hook and bar machine; (3) Hydro-extractor machine; (4) Garment washing machine falling under tariff item 8450 20 00; (5) Waistband attaching machine; (6) Label or tag inserting machine; (7) Profile cutting machine; (8) End cutter with cloth press track; (9) Collar point trimmer/gear knotcher machine; (10) Laser colour fading/marking/drawing machine; (11) Laser operated colour spraying machine for garments; (12) Needle detector machine; (13) Fusing machine; (14) Fabric laying machine; (15) Computerised cutting machine (C) Machinery for manufacture of technical textiles, namely:- (1) Precision coating heads (2) Turret winder and unwinders (3) Coating equipment for scrim fabrics (4) Multi-colour roto gravure printing machine for coated fabrics (5) Printing equipment for sineage for coated or laminated fabrics (6) Grommet fixing machine (7) Ultra sonic, hot air and wedge RF/laser polymetric sealing machine (8) Weatherometer (9) Automatic thickness gauze (10) Puncture resistance. (11) Twisting Machines (12) Material Handling system for Twisting Machines (13) Data capture system for Twisting Machines (14) Balancing Equipment for Cable Corder Spindle Motors (15) Shuttle-less looms (16) Reeds for weaving machines (17) Warp defects detection system (18) Parts for Airjet weaving machines (19) Parts for projectile weaving machines (20) Parts for Rapier weaving machines (21) Warp knotting system (22) Take up system for weaving machine (23) Creels for weaving machines (24) Package change system for creels (25) Process control equipment namely, Tension meters, On-line denier checking system, On-line twist checking system, On-line EDS monitoring system, Filamentation detector, Fluff Detector, Automatic Fabric Inspection System, Tacho-meters (26) Storage and Transport systems namely, Automated fabric transport system and Automated fabric packing system (27) Finishing Machines namely, Dipping Machine for Tyre Cord/industrial Fabrics, Coating Machines, Dipping Machine for beting duck, Stenter for Technical Textiles, Embossing Rollers, Parts and Accessories for Dip and coating units, Hydraulic Control for Accumulator, Dynamic Braking for Pull Rolls System, De-webber system, Burners with Controllers (28) Testing equipment, namely, Tensile Tester, Thermal Shrinkage Tester, Twist Tester, Fatigue Tester; (D) Woollen machinery items, namely:- (1) Automatic Hopper Feeder (2) Greasy Wool Opener (3) Tow-to-Top Converter (4) Automatic/Semi-Automatic Pump Press (5) Ring frame with 50 mm Ring or below PLC/Computer controlled (6) PLC/ Computer Controller Assembly Winding machine (7) PLC/ Computer controlled Two- for Twister/Three-for-one Twister (8) Twisting /covering machine for Lycra Yarn (9) Automatic cleaning machine for Heald, Reeds and drop wires. (10) Electric/ Electronic/ motorized beam trolley with Harness lifting arrangement. (11) Open Width scouring machine/Rope scouring machine (12) Damping unit for fabric conditioning (13) Automatic Weft straightener (14) Shearing machine (15) Continuous crabbing machine (16) Woollen ring frame (17) Fibre/Yarn/Fabric testing equipment namely, Fineness meter, Evenness Tester, Light Fastness Tester, Strength Tester, Length Measurement Tester, Crease Recovery Tester, Projection Microscope, Pilling and Abrasion Tester, Colour Comparator for instant observation of matched shades, Yarn friction and Hairiness meter and Seam Slippage Tester. (18) Rag tearing machine (19) Fibre opening and blending machine (20) Self Acting spinning frame (21) Raising machine (E) Machinery for use with shuttleless looms, namely, electronic dobby and jacquard. (F) Machinery for manufacture of denim fabrics, namely:- (1) Sand blasting or brushing machine (2) Washing machine falling under tariff item 8450 20 00 (G) Machinery for manufacture of non-wovens textiles, namely:- (1) Complete production lines for the production of following nonwovens, upto rolled goods preperation and packing, namely:- (a) Needle punched non-wovens (b) Chemically bonded non-wovens (c) Thermally bonded non-wovens (d) Stitch bond non-wovens (e) Spun laced (hydro entangled) non-wovens (f) Spun bonded non-wovens (g) Melt blown non wovens (h) Spun bond melt blown (SMS) non-wovens (2) Machinery for finishing of all non-wovens (3) Machinery for converting non-wovens into made-ups (H) Other machinery for use in textiles industry, namely:- (1) Spandex/e lastane yarn attachment on ring frame for manufacturing core spun yarn (2) Single end warping machine (3) Single end sizing machine (4) Reaching-in machine (5) Humidification plant. List 47 (See S. No. 439 of the Table) 1. Scramblers 2. Descramblers 3. Encoders 4. Decoders 5. Jammers 6. Network firewalls 7. Network sniffers, scanners and monitoring systems 8. Probes for data monitoring 9. SMS and MMS monitoring systems List 48 (See S.No. 504 of the Table) Omitted List 49 - Omitted List 50 (see Sr. No.509 of the Table) 1. Breadcrumbs 2. Batter 3. Flavouring Oil 4. Food Colours 5. Monosodium Glutamate 6. Flavouring extracts, and sauces 7. Pre-formed HIPS Containers 8. Polyurethane and Polystyrene containers meeting buyers' requirements 9. Printed Plastic Pouches for Packing buyers brand 10. Food grade Phosphates 11. Food tenderizers 12. Food enzymes 13. Food marinates 14. Starch (Wheat/non-wheat)/ Pre-gelatinized Starch 15. Sucrose 16. Sodium Chloride 17. Seasoning Salts/acids such as sodium carbonate, potassium hydrogen tartrate 18. Oleoresins/spice extract 19. Natural Edible gum 20. Anti-oxidants, BHT/EDTA/Sod, or Pot.Metabisulphite 21. Soya protein 22. Citric Acid 23. Sorbitol 24. Seasoning Oil 25. Gel Ice (for air freighting chilled fish) 26. Fats/Hydrogenated oils 27. Milk Protein 28. Reducing Sugars, such as lactose 29. Lecithin (emulsifier) 30. Glucose 31. Pre-formed Crystallised Polyethylene Terephthalate (CPET) containers 32. Ascorbic Acid 33. Sodium Citrate 34. Acid Sodium Carbonate (Sodium bicarbonate) 35. Sodium Sulfite 36. Active Oxygen 21/2002 Part-I - Table ****************** Notes :- 1. Has been substituted vide Notification No. 95/2008 dated 4/8/2008 before it was read as, 58. Micronised Progesterone 2. Conditions no. 20A inserted vide notification no. 110/2008 cus dated 22/10/2008 3. Condition no. 5A inserted vide notification no. 36/2009 Cus dated 17/4/2009 , further, substituted vide notification no. 84/2009 Customs, dated 31-7-2009 , before it was read as, [If imported by a sugar factory or a sugar refinery. Explanation.- For the purpose of this notification - sugar factory shall have the same meaning as assigned to it in Section 2(c) of the Sugarcane (Control) Order, 1966; sugar refinery means a unit which is engaged in the manufacture of refined sugar starting from the stage of raw sugar.] 3A. Condition 5B inserted vide notification no. 36/2009 Cus dated 17/4/2009 , further, substituted vide notification no. 84/2009 Customs, dated 31-7-2009 , before it was read as, [If imported by- State Trading Corporation of India Ltd (STC) upto an aggregate quantity of 2.50 lac metric tonnes; MMTC Limited (MMTC) upto an aggregate quantity of 2.50 lac metric tonnes; Projects Equipment Corporation of India Ltd (PEC) upto an aggregate quantity of 2.50 lac metric tonnes; or National Agricultural Cooperative Marketing Federation of India Ltd (NAFED) upto an aggregate quantity of 2.50 lac metric tonnes, with in the period ending on the 1st August, 2009.] 4. Condition no. 35A inserted vide notification no. 77/2009 Cus dated 7/7/2009 5. Inserted vide notification no. 77/2009 Cus dated 7/7/2009 6. In list 18 item no. (13) deleted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, Concrete Batching plants 50 cum/hr or more 7. inserted vide notification no. 77/2009 Cus dated 7/7/2009 8. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (33) Clicking Board levelling machine (34) Clicking machine 9. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (40) Conveyor system 10. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (77) Halogen and Adhesive Application machine 11. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (110) Injection Moulding of PVR/TPR/EVA Soles, Inserts and Half Soles 12. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (117) Ironing and Conditioning machine 13. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (136) Moccasin Performing machine 14. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (151) Piping machine for trimming and embelishment fixing machine 15. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (158) Polyurethane / PVC / TPR Sole, Insole, Heel, Heel Tip Injection Moulding machine (single or multiple station) 16. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (159) Pore part lasting machine 17. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (171) PVR/TU/EVA direct injection soling machine (DIP construction) 18. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (185) Scissors Cutting machine for plate 19. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (223) Tapping and seam rubbing machine 20. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (253) Stapling machine for lows to upper on leather shoes 21. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (256) Bistep cutting machine 22. Substituted vide notification no. 77/2009 Cus dated 7/7/2009 , before it was read as, (262) Dust collector systems 23. Condition no. 5C has been inserted, vide Notification No. 40/2010-Customs, dated 31.03.2010 . 24. Inserted vide notification no. 54/2010 Customs, dated 29.4.2010 25. Omitted vide Notification no. 21/2010 Customs, dated 27.2.2010 , before it was read as, 11. If the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that- (a) the parts or, as the case may be, the spare parts shall be used for the manufacture or maintenance, as the case may be, of the specified medical equipment; (b) he shall, within three months or such extended period that the said Deputy Commissioner or the Assistant Commissioner may allow, (i) in the case of parts, a certificate from the Deputy Commissioner of Central Excise or the Assistant Commissioner of Central Excise, as the case may be, having jurisdiction over the factory manufacturing the specified medical equipment, to the effect that the parts have been used in the manufacture of the specified medical equipment; or (ii) in the case of spare parts, necessary evidence to the satisfaction of the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the spare parts have been used for the maintenance of the specified medical equipment; and (c) he shall pay, on demand, in the event of his failure to comply with the above conditions, an amount equal to the difference between the duty leviable on such quantity of the parts or, as the case may be, spare parts, but for the exemption under this notification and that already paid at the time of importation. 26. Substituted vide Notification no. 21/2010 Customs, dated 27.2.2010 , before it was read as, (b) the importer, at the time of importation, furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that he shall use the imported goods exclusively for the construction of roads and that he shall not sell or otherwise dispose of the said goods, in any manner, for a period of five years from the date of their importation; and 27. Inserted vide Notification no. 21/2010 Customs, dated 27.2.2010 28. Lists 37 to 40 omitted vide Notification no. 21/2010 Customs, dated 27.2.2010 , before, these were read as, List 37 (See S. No. 363 of the Table) (1) Australia Antigen RIA kit (2) Cardiac catheters with guidewires (3) Clips for aneurysms and clips applying forceps in Neuro-Surgery (4) Cardio vascular sutures, including sternum steel sutures (5) Cardiovascular special instruments, namely:- (i) Coronary perfusion cannulae (ii) Electrical or gas operated sternal cutter (iii) High pressure stop cocks and connectors for pressure recording (iv) Vascular bull-dog clamps (v) Vascular clamps (vi) Vascular needle holders (vii) Vascular scissors straight or angled (viii) Vascular tissue forceps (6) Compressed air breathing apparatus complete (7) D.C. Defibrillators for internal use and pace makers (8) Laryngeal Mask / Endotracheal Tube (9) Haemodialysors (10) Heart lung machine (11) Heart valve prothesis including valve frames (12) Nebulized humidifier (13) Hydrocephalus shunts (14) Hyper-baric oxygen chamber (15) Fogarty and embolectomy catheters (16) Implantable cardiac pacemakers (17) Intra-arterial catheters and guidewires and material for intervention radiology (18) Intra-cardiac patches (19) Nebulizers (excluding ultrasonic nebulizers and heat nebulizers) (20) Omayya reservoirs for intraventicular investigation / therapy (21) Operating sets for Percutaneous Nephrostomy and Percutaneous removal of kidney stones with continuous irrigation and suction with ultrasonic Lithotrite, etc. (22) Ostomy products (Appliances) for managing Colostomy, Illcostomy, Ureterostomy, Illeal Conduit Urostomy Stoma cases such as bags, belts, adhesives seals or discs or rolls adhesive remover, skin barriers micropore surgical tapes, bag closing clamps karaya seals paste or powder, irrigation sets, plastic or rubber faceplates, flanges, male or female urinary incontinency sets, skin gels, in parts or sets (23) Oxygenator (24) Plastic disposable 3-way connectors (25) Portable intermittent positive, pressure breathing apparatus (26) Pulmoflator (27) Respirators including ventimeters (28) Sengstaken tubes (29) Tracheostomy tubes (30) Ventilator used with anaesthesia apparatus (31) Vascular grafts (32) Tracheostomy tube of plain PVC, Low pressure PVC, Red Rubber Plain, and Red Rubber cuffed (33) Various types of Cardiac Catheters including balloon tipped, double Lumen and PTCA catheters, balloon dilatation catheters and Endomyocardial biopsy forceps (34) Disposable and non-disposable cannula for aorta, vena cavae and similar veins and blood vessels and cannula for intra-corporal spaces (35) Programmer for pacemaker (36) Ancillaries for blood component therapy required for the treatment of cancer, namely, Y type blood solution recipient set, Transfer pack 1000 ml. and 300 ml., disposable pherasis bowl 225 ml. and 373 ml., wasting harness with bypass, and waste bags (37) AIDS (Acquired Immune Deficiency Syndrome) test kits, Enhanced luminescene analysers for AIDS, Hepatitis and other Analyses (38) Iridium wire (39) Anti-HLA sera (AB-CDR) (40) T.P.H.A. Kits and AIDS diagnostic kits (41) Gamma knife (42) Bone Marrow Transplant Equipment including silastic long standing intravenous catheters for Chemotherapy (43) Cell Separator (44) Pressure Transducer and Pressure Amplifier (45) Cell Saver (46) Craniotome (Pneumatic and Electric Equipment) and Drills (47) Binocular Loupes (48) Intra Aortic Balloon Pump (49) Remote After Loading Brachy Therapy Equipment (51) Dosimetry System (52) Cell Saver Equipment (53) Cell Washer (54) Thawer Equipment for Blood Warming (55) Mammography Unit (56) O2 Concentrator (57) Ventricular Assist Device (58) Pace Maker (59) Activated Clot Time Machine (60) Cobalt Therapy Unit (61) Colour Doppler Ultrasound Scanner (62) SPECT Gamma Camera (63) Deep Therapy Unit (64) Cardiac and Vascular Angiography System including Digital substraction Angiography (65) Pulse Oximeter (66) Blood Gas Analyser (including cartridges, if any), Sodium Potassium Analyser, Auto Analyser for enzymes, drug levels and bio-chemical investigations, or a combination of two or more of the aforesaid (67) Ultrasonic Surgical Aspirator (68) Intra Cranial Pressure Monitoring Equipment (69) Radio Therapy Simulator (70) Treatment Planning System (71) Angiography Contrast Agent (72) Image Intensifier (73) Magnetic Resonance Imaging System (74) Surgical Laser (75) Electro Hydraulic Operating Table for Cardio Throacic and Neuro Surgery (76) Implants for pain relief and bladder control (77) Artificial electronics larynx instruments (78) Ventilators other than those used with anaesthesia (79) Digital Video EEG System (80) Omitted (81) Small portable pumps used for giving slow infusion of anti-cancer drugs or thalassaemic drugs (82) Fibre optic endoscopes including , Paediatric resectoscope / audit resectoscope, Peritoneoscopes, Arthoscope, Microlaryngoscope, Fibreoptic Flexible Nasal Pharyngo Bronchoscope, Fibreoptic Flexible Laryngo Brochoscope, Video Laryngo Brochoscope and Video Oesophago Gastroscope, Stroboscope, Fibreoptic Flexible Oesophago Gastroscope. (83) Cardiac electrophysiology system, stimulator and Radio Frequency (RF) Generator (84) Fully Implantable and programmable Infusion Pump (85) Neuro Stimulation Systems for pain management (86) Devices and accessories for beating heart surgery (Tissue stabilizer and heart positioner) (87) Micro-Electrode Recording System for deep brain stimulation surgery (88) Cardiac Ablation System including Radio frequency ablation system (89) Ruthenium-106 Ophthalmic Applicator (90) Neuro Stimulator and therapy controller for tremor control therapy (91) Image Guidance System for neurosurgery (during operation) (92) Helical/ Spiral C.T. Scanner with or without Laser Camera (93) Centrifugal Pump for Extra Corporeal System (94) Automated blood culture/bacteriological identification and susceptibility systems (including that for mycobacterium tuberculosis) (95) Peripheral Stents (flexible bridge stents including iliac stent, renal stent, aortic stent) (96) Activated Clotting time Cartridges (97) Insulin Pump (98) Intra Coronary Shunts (99) Positron emission tomography (PET) (100) PEC-CT combined (101) Medical cyclotron (102) Urine chemistry analyzer (103) Radio frequency lesion generator (Neurogenerator) for stereotactic brain lesinoning for functional neurosurgery (104) Teletherapy (Radiotherapy) simulator machine (105) Automated PCR analyzer system for detection and monitoring of HIV viral load (PCR Kits) (106) Flow cytometer hematology analyzer for CD4 count (107) I.V. Line Filters (108) Multi-slice/EBT CT scan (109) Leucocyte and platelets depletion filters for thalassaemia patients (110) Rapid diagnostic kit for detecting infection with malarial parasite (111) Linear accelerator List 38 (See S. No. 367 of the Table) Ophthalmicequipment, namely :- (1) Ophthalmoscope-Direct/Indirect (2) Ophthalmic/Xenon Arc (3) Flurescein Angiography Equipment including Fundus Camera (4) Ultrasonic Equipment (A scan/ Pacchy meter) (5) Microsurgical needles, cannulas, blades, trephine blades, membrane peelers, diathermy probes, vitreous cutters, atraumatic needles and sutures, intraocular scissors and forceps (6) Tonometer (Schiotz/ Applanation / Pneumo) (7) Retinoscope streak/ spot (8) Operating glasses (2X, 4X, 6X)/ Binomag (9) Gonioscope, 3 mirror lens, special lenses for laser delivery, special diagnostic lenses (14D, 20D, 90D), Endo lens (10) Sterilisers (high speed / ethylene) (11) Specular microscope with monitor and recorder (12) Intraocular lenses/ Keratoprosthesis / orbital implants (13) Diathermy equipment (14) Synoptophore (15) Silicone Sponges/ rubber / bands, for Retinal Detachment Surgery (16) Vitrectomy equipment (17) Phaco-emulsification system (18) Visual field recording equipment (19) Ocular electro physiological testing equipment [Electroretinography / Electroculography / Visually evoked response equipment (ERG/EOG and VER)] (20) Keratometer / Automatic Keratometer (21) Prism bars (22) Laser Interferometer (23) Pacchymeter - optical / electronic (24) Aspiration - irrigation equipment (25) Automatic refractometer or lensometer / projection lensometer or a combination of the aforesaid (26) Complete refraction unit with phoropter / projection - chart (27) Ophthalmic hydraulic chair (28) Low visual aids and sets (telescopic glasses) (29) Colour vision testing equipment (30) Photoelectric keratoscope and thermokeratoscope (31) Pseudo-isochromatic chart book / Ishiare (32) Slit lamp biomicroscope / photo slit lamp (33) Surgical operating zoom microscope with closed circuit TV camera (34) Surgical operating microscope manual (35) Argon / krypton laser (36) Yag laser, excimer laser or diode laser (37) Ultrasonic bi-microscope (38) Confocal microscope (39) AB scan (40) Corneal topographic machine (41) Perimeter automated (42) Non contact tonometer (43) Nerve fibre layer analyzer (44) Fundus fluorescein angiography machine (digital with videography) (45) Optical coherence tomography machine (46) Photo dynamic therapy-laser (47) Transpupillary thermo therapy laser List 39 (See S. No.368 of the Table) ENT equipment, namely :- (1) Otoscope (2) Impedance Audiometer (3) BERA (Brain Evoked Response Audiometry) (4) Speech Audiometer (5) Surgical Operating Microscope (6) Fresnel's glasses (7) Magnifying Operating Glasses (Magnifying Loupes) (8) Microsurgical instruments for all Ear surgeries (9) Sialistic sheet used for Tympanoplasty operations (10) Sinoscopes 00 , 300 , 700 , 1200 (2.6 mm and 4 mm diameter) (11) Instruments for Endoscopic Sinus Surgery (12) CCD Camera, Monitor, VCR to fit with Sinoscopes (13) Cochlear Implants and equipment for performing Cochlear (14) Voice Prostheses (15) Blom Singer Voice Prostheses (16) Electronic Larynx (17) Sigel's Speculum (18) Microlaryngeal instruments (19) Video Processor (20) Video Cassette Recorders used along with the Video Endoscope (21) ENT Burrs List 40 (See S. No. 369 of the Table) (1) 12 (+/- 1) mm Laparoscope (Single incision) (2) Falope Ring - applicator single incision (for two rings) and procedure instruction manual, kit containing guide and loader and cleaning brush (3) 12 (+/- 1) mm Trocar (including piston type) with spare washers for sleeve and canulae and cleaning brush (4) Fibre Optic Light Cable (5) Bulbs, fuse lamps, Adapter for Fibre Optic Light Cable/Laparoscope (6) Carbondioxide (CO2) cylinder with pneumoperitoneum apparatus (7) Light Source (8) Machine for Gas Insufflator with Gas Tubing Spare Carbondioxide (CO2) Hose Pipe and a Gauge (9) Dual incision applicator Two rings (10) Trocal and Cannula 6-8 mm with valves gas stopcock (11) Probe 34-37 cm (12) Verres Needle (4 and 51/2 ) (13) Minilight source with accessories consisting of :- (a) 6 volts rechargeable battery (b) AC battery charger (c) AC power supplier 220 volts (d) Inter-connection assembly (e) Convertor (14) Falope Rings (15) 6-8 mm Laparoscope (double puncture) (16) Scissors 34-37 cm (17) Suction Cannula 34-37 cm Notes :- (A) Item Nos.(6), (7) and (8) may be imported separately or in combinations as dual control assembly. (B) Item Nos. (1) and (2) may be separate or in combination, when in combination, it is called Laparocator. 29. Inserted vide Notification no. 9/2010 Customs, dated 11-2-2010 30. Inserted vide Notification no. 9/2010 Customs, dated 11-2-2010 31. Substituted vide Notification no. 3/2010 Customs dated 13-1-2010 , before it was read as, 4. Rajasthan Atomic Power Project- Units 5 and 6 (Rawatbhata) - 440 MW 32. Inserted vide Notification no. 3/2010 Customs dated 13-1-2010 33. Substituted vide notification no. 137/2009 Customs dated 11/12/2009 , before it was read as, (ii) the power purchasing State undertakes, in principle, to privatize distribution in all cities, in that State, each of which has a population of more than one million, within a period to be fixed by the Ministry of Power. 34. Inserted vide notification no. 80/2010 Customs dated 10-8-2010 (in the notification it is 5C , but it should be 5D since 5C has already been inserted [see note not. 23 above] 35 Substituted vide notification no. 89/2010 Cus dated 1-9-2010 , before it was read as, 21B. If, - (a) The goods are imported by a manufacturer of cotton made ups for use in the manufacture of said goods for export by that manufacturer and the said manufacturer is registered with the Cotton Textile Export Promotion Council; (b) The total value of goods imported shall not exceed 1 per cent of the FOB value of made ups exported during the preceding financial year; (c) The importer produces a certificate from the Cotton Textile Exports Promotion Council certifying the value of exports made during the financial year mentioned in sub-condition (b), and also the value and quantity of goods already imported under this notification during the current financial year. This entry further substituted vide notification no. 91/2010 Cus dated 6-9-2010 , before it was read as, If, - (a) the goods are imported by a manufacturer of cotton made ups or polyester made ups for use in the manufacture of said goods for export by that manufacturer and the said manufacturer is registered with the Cotton Textile Export Promotion Council or the Synthetic Rayon Textiles Export Promotion Council as the case may be; (b) the total value of goods imported shall not exceed 1 per cent of the FOB value of made ups exported during the preceding financial year; (c) the importer produces a certificate from the Cotton Textile Export Promotion Council or the Synthetic Rayon Textiles Export Promotion Council certifying the value of exports made during the financial year mentioned in sub-condition (b), and also the value and quantity of goods already imported under this notification during the current financial year. 36 Condition No. 5D, 5E, 5F, has inserted vide Notification No. 2/2011-Cu, dated 8-1-2011, 37 Condition No. 21, for item (a) and the entry relating there to, the following item and entry has been substituted vide Notification No. 21/2011-Cus, dated 1-3-2011. Clause (b) has been inserted in addition to the existing clause (b). Before it was read as,- (a) the goods are imported by a manufacturer of textile garments or leather garments for use in the manufacture of textile garments or leather garments for export by that manufacturer and that the said manufacturer is registered with the Apparel Export Promotion Council or Council for Leather Exports, or as the case may be, Handloom Export Promotion Council. 38 For Condition No. 104 and the entries relating thereto, the following has been substituted, vide Notification No. 21/2011-Cus, dated 1-3-2011, before it was read as,- (i) the aircraft are imported by an operator who has been granted approval by the competent authority in the Ministry of Civil Aviation to import aircraft for providing non-scheduled (passenger) services or non-scheduled (charter) services; and (ii) the importer furnishes an undertaking to the Deputy Commissioner of Customs or Assistant Commissioner of Customs, as the case may be, at the time of importation that:- (a) the said aircraft shall be used only for providing non-scheduled (passenger) services or non-scheduled (charter) services, as the case may be; and (b) he shall pay on demand, in the event of his failure to use the imported aircraft for the specified purpose, an amount equal to the duty payable on the said aircraft but for the exemption under this notification. Explanation .-for the purposes of this entry,- (a) 'operator' means a person, organization, or enterprise engaged in or offering to engage in aircraft operation; (b) 'non-scheduled (passenger) services' means air transport services other than Scheduled (passenger) air transport services as defined in rule 3 of the Aircraft Rules 1937. (c) 'non-scheduled (charter) services' mean services provided by a 'non-scheduled (charter) air transport operator', for charter or hire of an aircraft to any person, with published tariff, and who is registered with and approved by Directorate General of Civil Aviation for such purposes, and who conforms to the civil aviation requirement under the provision of rule 133A of the Aircraft Rules 1937: Provided that such Air charter operator is a dedicated company or partnership firm for the above purposes. 39 Condition No.109 to 111 the entry relating there to, the following has been Inserted, vide Notification No. 21/2011-Cus, dated 1-3-2011. Further Substituted vide Condition No. 109 vide Notification No. 01/2012-Cus, dated 16/01/2012, w.e.f. 17th day of January, 2012, before it was read as:- [109. If the importer produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, an assay certificate issued by the mining company, giving details of composition. 40 List No. 3 Item (137) as Corrected, vide Corrigendum F. No. 334/3/2006, dated 28-2-2006. Everolinus read Everolimus 41 List No. 3 Item (171) to 174 the following has been Inserted vide Notification No. 21/2011-Cus, dated 1-3-2011. 42 List No. 18 Item No. (22) has been Inserted vide Notification No. 21/2011-Cus, dated 1-3-2011. 43 List No. 22 Item No. (6) as Corrected vide Corrigendum F. No. B-7/2/2002-TRu (Pt.I), dated 26-4-2002, Short message service read Short message service hardware/Voice mail service hardware 44 Inserted vide notification no. 31/2011 Cus, dated 24-3-2011 , Further reinserted vide notification no. 39/2011 Cus dated 10-5-2011 45 Inserted vide notification no. 34/2011 Cus dated 15-4-2011 46 Inserted vide notification no. 55/2011 Cus dated 5-7-2011 47. Inserted vide notification no. 65/2011 Cus dated 21-7-2011 48. Inserted vide Notification No. 04/2012-Cus, dated 17/01/2012