| Standards of Input Output Norms (SION) |
Home  Schedules Standards of Input Output Norms (SION) This |
|
|
03 - Engineering Products - Standards of Input Output Norms (SION)
|
|
Showing 1501 to 2000 of 2056 Records |
| |
|
| C1460 |
|
DT Plus Module with Protection Insert with Test Contact with Arrestor without Gel
|
|
| C1461 |
|
Castor Wheels
|
|
| C1462 |
|
Frame and Field Assembly for 1.5 KW Automobile Starter Motor
|
|
| C1463 |
|
Complete Bicycle Along with Deraileur System & Chains
|
|
| C1464 |
|
Stainless Steel Interlock Hose/ Hose Assembly
|
|
| C1465 |
|
Stainless Steel Bellow/ Bellow Assembly
|
|
| C1466 |
|
Aluminium Grills Anodised
|
|
| C1467 |
|
Brake Drum made of Alloy Cast Iron (Rough Castings)
|
|
| C1468 |
|
Stainless Steel Dye Springs made Out of AISI 316 or AISI 304
|
|
| C1469 |
|
Cistern Side Inlet valve, Cistern Bottom Inlet Valve, Cistern Outflow Valves
|
|
| C1470 |
|
Deleted
|
|
| C1471 |
|
Finished Cup (Component of Tapered Roller Bearing)
|
|
| C1472 |
|
Split Retaining Rings of Cabbon Steel (Galvanised)
|
|
| C1473 |
|
Split Retaining Rings of Stainless Steel in SS 516 or 340
|
|
| C1474 |
|
Deleted
|
|
| C1475 |
|
Compressor Mounting Brackets/Hanger Brackets/ mounting Spring Brackets/ Overload Brackets
|
|
| C1476 |
|
Locating Cup/Muffler Assembly (Suction/ Discharge/ Shockloop Assy./ Protective Cover Bale Strap/ Discharge Valve retainer
|
|
| C1477 |
|
Phosphor Copper
|
|
| C1478 |
|
Manganese Copper
|
|
| C1479 |
|
Alloy Aluminium Conductor Steel Reinforced (AACSR)
|
|
| C1480 |
|
Washing Machine
|
|
| C1481 |
|
Battery Type NCSP-B-40600D (Nickel Cadmium batteries) 24 Volts, 40 AH.
|
|
| C1482 |
|
Pneumatic Demolition Tool
|
|
| C1483 |
|
Pneumatic Tools Chipper - 1
|
|
| C1484 |
|
ALPVCP VCSWP VC(1.1 kv)
|
|
| C1485 |
|
ALPVCSWPVC (1.1 kv)
|
|
| C1486 |
|
ALPVCPVCSWP VC(1.1 kv)
|
|
| C1487 |
|
Earth Moving Wheels having dia not less then 25
|
|
| C1488 |
|
Deleted
|
|
| C1489 |
|
Rear Axle Housing Assembly for LCV/HCV
|
|
| C1490 |
|
Finned Tubes
|
|
| C1491 |
|
Sintered Bronze Bushes & Part EP Grade
|
|
| C1492 |
|
Cold Rolled Grain Oriented Silicon Electrical Steel Sheets/ Coils
|
|
| C1493 |
|
Pneumatic Tool (Air Hoists) upto 1000 kg. lifting capacity
|
|
| C1494 |
|
Pneumatic chipper with cylinder Bore Chrome Lined 1
|
|
| C1495 |
|
Pneumatic Tool Heavy Duty Air Hoist - Rated Capacity above 909 kg. (2000 pounds) up to and including 1818 kg. (4000 pounds)
|
|
| C1496 |
|
Pneumatic Tool Heavy Duty Air Hoist - Rated Capacity above 455 kg. (1000 pounds) upto and including 909 kg. (2000 pounds)
|
|
| C1497 |
|
Pneumatic Tool Scabbler with 3000 BPM (Blows per minute)
|
|
| C1498 |
|
Pneumatic Tool Hand Drill with Drilling Diameter upto 1-1/4
|
|
| C1499 |
|
Pneumatic Tool Scabbler with 2900 BPM (Blows per Minute) per piston
|
|
| C1500 |
|
Pneumatic Tool Hand Drill with Drilling Diameter upto 1-1/4
|
|
| C1501 |
|
Low Carbon Ferro Manganese
|
|
| C1502 |
|
Medium Carbon Ferro Manganese
|
|
| C1503 |
|
Continuous Cast Copper Rod/ Cathodes
|
|
| C1504 |
|
Cold Rolled Non Grain oriented Silicon electrical Steel Sheet/ Coils in fully/ semi processed state
|
|
| C1505 |
|
Hermatic Compressor
|
|
| C1506 |
|
Identifiable ready-to-use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified
|
|
| C1507 |
|
Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel/ Stainless Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified
|
|
| C1508 |
|
Identifiable ready to use machined parts/ components made wholly or predominantly of Iron (not less than 90% by weight) manufactured through casting process, not elsewhere specified
|
|
| C1509 |
|
Identifiable ready to use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified
|
|
| C1510 |
|
Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified
|
|
| C1511 |
|
Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified
|
|
| C1512 |
|
Refrigerator Display Cabinet (Capacity to be Indicated)
|
|
| C1513 |
|
Pneumatic Tool-Clay Digger (Picks) with outside Trigger, Throttle Latch Retainer
|
|
| C1514 |
|
Pneumatic Tool-Light Simplate Valve Temper with Bore and Stroke size 1 7/16
|
|
| C1515 |
|
Pneumatic Tool Heavy duty Ring volve Temper with Bore and Stroke size upto 2 1/4
|
|
| C1516 |
|
Pneumatic Tool Rammer
|
|
| C1517 |
|
Pneumatic Tool Clay Digger round (picks) with outside trigger Sleeve Retainer and round/ Square Chuck
|
|
| C1518 |
|
Submerssible Water Pump of various Horse Powers (HP)
|
|
| C1519 |
|
Submerssible Water Motor of various Horse Powers (HP)
|
|
| C1520 |
|
Auto Transformers (Variable Voltage) (b) Above 30 KVA I phase or 90 KVA 3 phase and upto 130 KVA I phase or 390 KVA 3 phase
|
|
| C1521 |
|
Auto Transformers (Variable Voltage) (c) Above 130 KVA I phase or 390 3 phase
|
|
| C1522 |
|
Pneumatic Tool-Balancer with balance Capacity above 75 1b (34.1Kg) upto and including 210 1b (95.5Kg)
|
|
| C1523 |
|
Pneumatic Tool-Clay Digger/Utility Hammer (picks) Latch Retainer with Chuck 7/8
|
|
| C1524 |
|
Pneumatic Tool-Clay Digger/Utility Hammer (Picks) Latch Retainer with Chuck 7/8
|
|
| C1525 |
|
Pneumatic Tool-Balancer with balance capacity upto 75 1b (34.1Kg)
|
|
| C1526 |
|
Pneumatic Tool-Reversible Drill with the speed of 350 R.P.M. and above upto including 750 R.P.M.
|
|
| C1527 |
|
Pneumatic Tool-Non Reversible Drill with the speed of 350 RPM and above upto and including 750RPM.
|
|
| C1528 |
|
Pneumatic Tool-Reversible Drill with the speed above 100RPM upto and including 350RPM
|
|
| C1529 |
|
Pneumatic Tool-Reversible Drill with the speed upto 100RPM
|
|
| C1530 |
|
Movements for Electrical Measuring Instruments type: Moving iron, Moving Coil,Dynamo Meter,Bimetallic Reed Type,Namely Volt Meter,Ammeter,Frequency Meter,Watt Meter,Multimeters,Insulation Testers,Maximum Demand Indicator,Power Factor Meter
|
|
| C1531 |
|
Pneumatic Tools-Hand Drill without Muffler with chuck 3/4
|
|
| C1532 |
|
Pnumatic Tools-Hand Drill with Muffler and Shifter Sleeve with Chuck 3/4
|
|
| C1533 |
|
Pneumatic Tool-Concrete Vibrator with 2 1/2 (inch) Head
|
|
| C1534 |
|
Pneumatic Tool
|
|
| C1535 |
|
Pneumatic Rock Drill
|
|
| C1536 |
|
Pneumatic Tool-Riverting Cutter (Buster) 8
|
|
| C1537 |
|
Regulators with rotating outlet for LPG Cylinder
|
|
| C1538 |
|
Non Alloy Steel Forged (Mechined) Hammers upto 10Kg Pc. Wt. Without Handle or with Handle made of Steel/Wood/Rubber Gripped Steel Pipe. PP & Fiberglass
|
|
| C1539 |
|
Bearing/Gear Puller made of Non Alloy Steel Plate/Round with chrome plated legs
|
|
| C1540 |
|
Handle Bar Switch LH/RH : a) with/without grip (b) with/without lever (c)with/without cone
|
|
| C1541 |
|
Grip for Handle Bar with/without Cone
|
|
| C1542 |
|
Shifted to Electronic Group
|
|
| C1543 |
|
Shifted to Miscellaneous Group
|
|
| C1544 |
|
Aluminium Drying Hanger
|
|
| C1545 |
|
Micanite Insulator Sheets containing 170gms, Resin
|
|
| C1546 |
|
Carbon Steel/Alloy Steel(including Stainless Steel). Forged Flanges
|
|
| C1547 |
|
Outdoor/Indoor Vaccum Circuit Breaker with or without Motor operated mechanism and supporting structure (of different ratings and weight of supporting structure)
|
|
| C1548 |
|
Outdoor/Indoor Vaccum Circuit Breaker with Motor operated mechanism and supporting structure (of different ratings and weight of supporting structure)
|
|
| C1549 |
|
Pressure Cooker made of Aluminium Body & Stainless Steel (AISI 304 Grade) Lid
|
|
| C1550 |
|
Carbon Steel (MS) Fabricated Tower Packings
|
|
| C1551 |
|
Shifted to Electronic Group
|
|
| C1552 |
|
Deleted
|
|
| C1553 |
|
Battery type NCSPB 25150 (Nickel) Cadmium Batteries) 24Vols. 25AH
|
|
| C1554 |
|
Shock Absorbers for Two wheelers/three wheelers
|
|
| C1555 |
|
Strut with Spring Assembly for Van
|
|
| C1556 |
|
Shock Absorbers (Gas filled) for Multi Utility vehicle (MUV)
|
|
| C1557 |
|
Shock Absorbers for Cars/Jeep-conventional
|
|
| C1558 |
|
Circuit Breakers upto & including 200KVA
|
|
| C1559 |
|
Shifted to Electronics Group
|
|
| C1560 |
|
Shifted to Electronics Group
|
|
| C1561 |
|
Shifted to Electronics Group
|
|
| C1562 |
|
Shifted to Electronics Group
|
|
| C1563 |
|
Shifted to Electronics Group
|
|
| C1564 |
|
Shifted to Electronics Group
|
|
| C1565 |
|
Shifted to Electronics Group
|
|
| C1566 |
|
Shifted to Electronics Group
|
|
| C1567 |
|
Shifted to Electronics Group
|
|
| C1568 |
|
Shifted to Electronics Group
|
|
| C1569 |
|
Shifted to Electronics Group
|
|
| C1570 |
|
Shifted to Electronics Group
|
|
| C1571 |
|
Shifted to Electronics Group
|
|
| C1572 |
|
Shifted to Electronics Group
|
|
| C1573 |
|
Shifted to Electronics Group
|
|
| C1574 |
|
Bicycle Tube Valve mainly made of Brass
|
|
| C1575 |
|
Bronze ingots of different allowing percentage (containing Tin, Copper and Nickle)
|
|
| C1576 |
|
Tungsten Filament for GLS Lamps- 150 WCC
|
|
| C1577 |
|
Doctor Blades (for printing machines)
|
|
| C1578 |
|
Fire Clay Bricks/Shapes
|
|
| C1579 |
|
Iron-Nickel Alloy(s) Wire /Strip of different composition
|
|
| C1580 |
|
Nickel Chromium Alloy(s) Wire /Strip of different composition
|
|
| C1581 |
|
Nickel-Copper Alloy(s) wire /Strip of different composition
|
|
| C1582 |
|
High Speed Steel broaches (cutting tolls), Cobalt & Non-Cobalt Grade
|
|
| C1583 |
|
Spring Casing for Pipe Line support
|
|
| C1584 |
|
Staples/Staples in Strips
|
|
| C1585 |
|
CNC/NC Hydraulic Shearing Machine
|
|
| C1586 |
|
Iron Alloy Powder made from Sponge Iron of different composition
|
|
| C1587 |
|
CNC Hydraulic Press Brake
|
|
| C1588 |
|
Deleted
|
|
| C1589 |
|
Duel Gauge Prestresed Concrete sleeper (size 2750mm X 250mm Based Width X 255mm Height)
|
|
| C1590 |
|
Shifted to Electronic Group
|
|
| C1591 |
|
Aerosol Valve
|
|
| C1592 |
|
Disc Wheel Flat Base Rim
|
|
| C1593 |
|
Vaccum Drum Cane Mud Filters
|
|
| C1594 |
|
Automobile Locks other than Ignition locks
|
|
| C1595 |
|
Folding Machine for Sheetmetal (Manual)
|
|
| C1596 |
|
Rolled Aluminium Colour coated Plates, Sheets, Strips including Corrugated Aluminium Sheets/Strips
|
|
| C1597 |
|
High Speed Stel Wires
|
|
| C1598 |
|
Machined Components made of brass not elsewhere specified
|
|
| C1599 |
|
Industrial Valve fitted with Actuator
|
|
| C1600 |
|
Sanitary Fittings made of Nickle Bronze
|
|
| C1601 |
|
Complete Rear Lamp Assembly for Automobiles
|
|
| C1602 |
|
Lense for Rear Lamp Assembly for Automobiles
|
|
| C1603 |
|
Shifted to Electronic Group
|
|
| C1604 |
|
Shifted to Electronic Group
|
|
| C1605 |
|
Double Parabolic Louvres (Aluminium Louvres for Light Reflection)
|
|
| C1606 |
|
PFA or FEP or PTFE or PVDF resin lined Ball Valves with PTFE components like seals, seats, packing etc. in assorted size/ Weight
|
|
| C1607 |
|
Epoxy components of different voltage rating and specification
|
|
| C1608 |
|
Diesel Generating Set (specification to be indicated by the applicant)
|
|
| C1609 |
|
1200mm Slat Chain Conveyor
|
|
| C1610 |
|
Diapharagm Actutators
|
|
| C1611 |
|
Aluminium Rod/Bar and other extruded products
|
|
| C1612 |
|
Hydraulic Jack Weight 22Kgs. Model No. HJ01021
|
|
| C1613 |
|
Tungsten Carbide Inserts
|
|
| C1614 |
|
Typewriter (Manual) with Metal Casing
|
|
| C1615 |
|
Screw/Gear Pump/Pumpset
|
|
| C1616 |
|
Asbestosfree Brakelinings without Brass Chips & Nitrile Rubber
|
|
| C1617 |
|
Rechargeable Flash Light 3.6 Volt AA Size Ni-Cd Battery
|
|
| C1618 |
|
Rechargeable Flash Light 2.4 Volt AA Size Ni-Cd Battery
|
|
| C1619 |
|
Rechargeable Flash Light 2.4 Volt Button Type Ni-Cd Battery
|
|
| C1620 |
|
Rechargeable Flash Light 2.4 Volt Button Type Ni-Cd Battery with twin Bulb
|
|
| C1621 |
|
Fibre Bed Mist Eliminator (Candle Filter) having Glass Fibre Filter Segments
|
|
| C1622 |
|
Contacts (connector parts) Made of Phosphor Bronze
|
|
| C1623 |
|
Ball Screw Actuator
|
|
| C1624 |
|
Cementing Float/Duplex/Differential shoes of different sizes
|
|
| C1625 |
|
Stage Cementing Collars
|
|
| C1626 |
|
Galvanised High Carbon Steel Wire Ropes with Polypropelene Core
|
|
| C1627 |
|
Copper based alloy ingots of different grade
|
|
| C1628 |
|
Cementing Float/Duplex Differential Collar of different sizes
|
|
| C1629 |
|
Single Stage regular with rotating outlet for LPG
|
|
| C1630 |
|
Galvanised Steel Flexible Tube/Pipe (Conduit) with PVC coating
|
|
| C1631 |
|
Steel Moulds of size 5150 mm long X 1181mm Wide X 2.25 mm TK for manufacturing A.C. Corrugated Sheets
|
|
| C1632 |
|
Electrical Wiring Accessories/ components made of Phosphors Bronze
|
|
| C1633 |
|
Electrographatised Carbon Block
|
|
| C1634 |
|
Metallic Graphite Blocks containing 62% Copper
|
|
| C1635 |
|
PVC Insulated Unarmoured control purpose copper cable upto 1.1KV Size 36/0.23mm (1.5Sq.mm) X 3 Core
|
|
| C1636 |
|
Burning Lances (Non-alloy Steel pipes fitted with alloy steel wires)
|
|
| C1637 |
|
Spinning Card Cans
|
|
| C1638 |
|
Diffuser and parts thereof namely Flower, Core, Core Assembly and outer frame in various sizes manufactured without joints from Aluminium Sheets, (other than those manufactured from Aluminium Section/extrusions)
|
|
| C1639 |
|
Copper Conductor covered with Polyester film & Glass fibre Yarn
|
|
| C1640 |
|
Fibreglass/ Synthetic Filter Bags of different sizes with Snap Ring made of Stainless Steel AISI 301 and other fittings
|
|
| C1641 |
|
Shifted to Electronic Group
|
|
| C1642 |
|
Connector Harness DC Charger Cable Assembly
|
|
| C1643 |
|
Platform for Electronic Balances & Weighing Systems
|
|
| C1644 |
|
Galvanised Lamp stand made of CRCA Sheet
|
|
| C1645 |
|
1) Mini Dumper 2)Front end Loaded cum Dumper 3) Cement Concrete Mixer
|
|
| C1646 |
|
Shifted to Electronic Group
|
|
| C1647 |
|
Capital Goods & Machinery notelsewhere specified
|
|
| C1648 |
|
3/4 Tube Fryer
|
|
| C1649 |
|
U.V. Sterlizer
|
|
| C1650 |
|
Automobile Ignition Lock
|
|
| C1651 |
|
Hair Styler Model No. 4522
|
|
| C1652 |
|
Liquidiser Jar Complete for Mixer-Grinder Model No. 4250
|
|
| C1653 |
|
Mixer Grinder with Food Chopper & Liquidiser Jar Model No. 4249
|
|
| C1654 |
|
Hair Curler Model No. 4522
|
|
| C1655 |
|
Hair Dryer Model No. 4548
|
|
| C1656 |
|
Mixer Grinder with food Chopper Model No. 3249
|
|
| C1657 |
|
Shifted to Electronic Group
|
|
| C1658 |
|
Valve Seat Insert made of Alloy Steel of following Composition:-(i) Chromium 2, 4-4.8%, (ii) Molybdenum 0.36-0.72%, (iii) Tungston 0.5%, (iv) Nickel: 1.5-4.5%, (v) Cobalt: 1.6%, (vi) Boron: 0.3%, (vii) Iron and Carbon: Balance
|
|
| C1659 |
|
Molybdenum Fine Wire (below 0.5mm Dia)
|
|
| C1660 |
|
Ratchet Wheel Plates
|
|
| C1661 |
|
Oil Pressure Switch for Motor vehicle
|
|
| C1662 |
|
Rod Thermostate of Different size
|
|
| C1663 |
|
PVC Insulated unarmoured control purpose copper cable upto 1.1KV Size: 112/0.275mm (6.8Sq.mm) X 4 Core
|
|
| C1664 |
|
PVC Insulated Unarmoured Control purpose copper cable upto 1.1KV Size 112/0.30mm (8sq.mm) X 3 Core
|
|
| C1665 |
|
PVC Insulated Unarmoured control purpose copper cable upto 1.1KV. Size 72/0.24MM (3.35Sq.mm) X 3 Core
|
|
| C1666 |
|
PVC Insulated Unarmoured Control purpose copper cable upto 1.1KV, Size72/0.24mm (3.35sq.mm) X 4 core
|
|
| C1667 |
|
Harrow Disc Plain
|
|
| C1668 |
|
Ring Gear Blank made of non alloy steel
|
|
| C1669 |
|
Stainless Steel 3 container lunchmate
|
|
| C1670 |
|
Heat Recovery Rotor (1 No. Heat recovery rotor of 1 cubic meter having flute height of 1.5mm)
|
|
| C1671 |
|
Heat Recovery Wheel (1 No. Heat recovery wheel incorporating Rotor of 1 Cubic Mtr. volume having 1.9mm flute height)
|
|
| C1672 |
|
Asbestos Brake Linings (Rubberised with Nitrile Rubber)
|
|
| C1673 |
|
Tin Alloy Ingot/ Anode/ Bar/ Slabs/ Pig
|
|
| C1674 |
|
Bourdon Sensing Pressure Gauge
|
|
| C1675 |
|
Anchor Plate for Dredging made of CR Non Alloy Steel
|
|
| C1676 |
|
Taps of high speed steel
|
|
| C1677 |
|
B) 2 Core X 1.5 Sq.mm PVC insulated & Sheathed Cable with 1.0 Sq. mm Earth ConductorA) PVC Insulated Unarmoured Control purpose copper cable core area 1.62 Sq.mm. Size: 35/0.24mm X 4 Core B) 2 Core X 1.5 Sq.mm PVC insulated & Sheathed Cable with 1.0 Sq. mm Earth Conductor
|
|
| C1678 |
|
Platinum/Rhodium/Palladium Catalyst Gauzes of different composition
|
|
| C1679 |
|
Ferro Aluminium Containing 35-40% Aluminium
|
|
| C1680 |
|
Power driven centrifugal Pump with motor or frame size 1071 (0.5HP)
|
|
| C1681 |
|
Power driven centrifugal pump with motor of frame size 1063 (0.5HP)
|
|
| C1682 |
|
Power driven centrifugal pump with 0.75 HP motor
|
|
| C1683 |
|
Power driven centrifugal pump with 1HP motor
|
|
| C1684 |
|
Shifted to Electronics Group
|
|
| C1685 |
|
Ultra Press
|
|
| C1686 |
|
Mineral Insulated Resistance Temperature Detector (RTD) Assembly
|
|
| C1687 |
|
Tungsten Contact having 55%+/-2% Tungsten by weight
|
|
| C1688 |
|
Deleted
|
|
| C1689 |
|
Monocular/Binocular Microscope
|
|
| C1690 |
|
Drive Shaft Assembly, Front Wheel Drive- LH/RH without ABS Ring
|
|
| C1691 |
|
Drive Shaft Assembly, Front Wheel Drive- LH/RH with ABS Ring
|
|
| C1692 |
|
Stainless Steel LPG Stove with /without auto ignition
|
|
| C1693 |
|
Hot Forged Steel nuts
|
|
| C1694 |
|
Copper Bonded Ground Rods UL approved (0.01 inches copper coating)
|
|
| C1695 |
|
Transformers upto 500 VA
|
|
| C1696 |
|
Turbocharger
|
|
| C1697 |
|
Nickel Cadmium Cells (Sintered plate) 1.2 Volts as per European Standard EN 2570 or equivalent
|
|
| C1698 |
|
Aluminium Alloy Cast Flanges
|
|
| C1699 |
|
35mm KB 10 Photographic Camera
|
|
| C1700 |
|
Shifted to Electronic Group
|
|
| C1701 |
|
Ferro Calcium Cored Wire (Containing mixture of 28-30% Ca Granules, 70-72% Iron Powder and Al. etc. in trace)
|
|
| C1702 |
|
Silver Contacts/Silver Alloyed contacts or Wire/Silver profiles contacts/Silver Bimetal Contacts/Silver Bimetal Profiles/Sheet Contacts/Silver Contacts on Carrier/Silver Alloyed Contacts on Carrier/Non-Ferrous Metal Contacts
|
|
| C1703 |
|
Lacquered Electrolytic Plate Sheet
|
|
| C1704 |
|
Copper Clad/Coated Steel Wire Single or Stranded having single wire less than 0.5mm dia
|
|
| C1705 |
|
1) Resistance wire: single or stranded or wound on Fibre Glass Core having single wire less than 0.5mm, using(a) Copper Nickel Alloy(s) OR (b) Nickel Chromium Alloy(s)
|
|
| C1706 |
|
Pump set with AC SQ Induction motor
|
|
| C1707 |
|
AA Alkaline Battery (24gms)
|
|
| C1708 |
|
Cooling Tower complete including in completely knocked down condition, with or without accessories and other parts
|
|
| C1709 |
|
Suspension Hanger made of Stainless Steel Wire-Grade AISI 302
|
|
| C1710 |
|
Polyesterimide Enamelled Copper Wire/Strip
|
|
| C1711 |
|
Plastic (Ethylene Co-polymer) Clad/ Coated Tin free Steel Tapes for cable armouring containing 93% Tin free Steel and 7% plastic
|
|
| C1712 |
|
Bathroom jali with frame size 20Cm X 20 Cm made of stainless steel sheet grade AISI 430
|
|
| C1713 |
|
Ventilation jali with frame having hole made of stainless steel sheetgrade AISI-430
|
|
| C1714 |
|
High Chromium Valve Seat inserts with Chromium content 35% or more
|
|
| C1715 |
|
Abrasive Stone with Grain Bond of ratio 57:43
|
|
| C1716 |
|
Aluminium Conductor 1C x 300 Sq.mm 11/11KV (UE) XLPE insulated and screened, aluminium wire screeing over insulation and armouring ALXLPE PVCS, AWA PVC Cable Minimum export weight 2681.6 Kg/Km
|
|
| C1717 |
|
Aluminium Conductor 1C x 300 Sq. mm 19/33 KV (E) XLPE insulated and screened, aluminimum wire screening over insulation and armouring ALXPE PVCs AWA PVC Cable - Minimum export weight 3850Kg/Km
|
|
| C1718 |
|
Aluminium Conductor 3 core X 185Sq. mm 11/11 KV (UE) XLPE insulated and screened, aluminium wire screening over individual core ALXPE PVCs FPVC cable minimum export weight 6745.1 Kg/Km
|
|
| C1719 |
|
Aluminium Conductor 3 Core X 70 Sq. mm 11/11 KV(UE) XLPE insulated and screened, aluminium wire screening over individual core ALXPE PVCs FPVC cable-minimum export weight 4300Kg/Km
|
|
| C1720 |
|
Cabinet parts made of Galvanised Steel Sheets
|
|
| C1721 |
|
Contact element for electrical/electronic switches
|
|
| C1722 |
|
Pilot Light (containing relevant Zinc Alloy)
|
|
| C1723 |
|
Differential Bevel Gears made of Alloy Steel (B forging Process)
|
|
| C1724 |
|
Deleted
|
|
| C1725 |
|
Polyester tap lapped, Nomex paper covered, fibreglass covered varnish bonded aluminium conductors
|
|
| C1726 |
|
237-103 GDS Clamp 2.5Qmm 3 Pole Grey, 0237- 0103/0999-0990/PW 11-0000 (weighing 2.79grams)
|
|
| C1727 |
|
284-621 Terminal Block 35 Qmm/3x10Qmm/0284-0621/0999-0990/PW 11-0000 of diferent colour (weighing 55.2 grams)
|
|
| C1728 |
|
280-101 Side Entry Clamp 2.5mm2/ Cage Clamp connection 0280-0101/0999-0990/PW/11-0000 of different colour (weighing 3.96gms.)
|
|
| C1729 |
|
Silica Bricks/Shapes for Glass Melting Furnace
|
|
| C1730 |
|
Glass Fibre Reinford Plastic Pipe with coupler (containing minimum 75% of glass fibre required for deep well hand pumps)
|
|
| C1731 |
|
Magnesium cored wire (containing mangesium granules having Mg. content 99% min.)
|
|
| C1732 |
|
Ferro-Silica-Calcium ( FESICA) Cored Wire (containing FESCICA alloy powder having Ca. 28-33%, Si. 57.65%, Fe. 4% min. and A1. T. P & S:traces)
|
|
| C1733 |
|
Cold Rolled Grain Oriented (CRGO), fully processed, Silicon-Electrical Alloy Steel Sheets/Strips/Wide Coils with insulating coatings of inorganic/organic meterial
|
|
| C1734 |
|
Non Cast Hardware Fittings made of Non Alloy/Alloy/Stainless Steel Rod
|
|
| C1735 |
|
Pin made of Carbon Steel
|
|
| C1736 |
|
Deleted
|
|
| C1737 |
|
Deleted
|
|
| C1738 |
|
Deleted
|
|
| C1739 |
|
Shifted to Chemical Group
|
|
| C1740 |
|
Handle Assembly made of Stainless Steel for operation of Butter Fly Valve
|
|
| C1741 |
|
Coaster Brake Hub for Bicycle containing 263 gm of item 1 and 608 gm of Item 2
|
|
| C1742 |
|
Industrial Boiler/Sub assemblies of the Boilers
|
|
| C1743 |
|
Motorized three wheelers in CBU/CKD/SKD condition powered by diesel engines of capacity from 300 c to 550cc
|
|
| C1744 |
|
Hydraulic Jacking Beam Model SJ 15
|
|
| C1745 |
|
Hermetically sealed compressors for air-conditioner using R 22 refrigerant gas of different capacities
|
|
| C1746 |
|
Deleted
|
|
| C1747 |
|
Deleted
|
|
| C1748 |
|
Deleted
|
|
| C1749 |
|
Table, Kitchen & other house hold articles made of aluminium including anodized with or without handle irrespective of what material handle are made of rectangular/Square with straight edges
|
|
| C1750 |
|
Vaporizer made of Aluminium
|
|
| C1751 |
|
Tyre curing press of all sizes
|
|
| C1752 |
|
Dry Cell R6 PVC/Paper Jacket 16.45gm/pc
|
|
| C1753 |
|
Dry Cell R6 Metal Jacket 18.45gm/pc
|
|
| C1754 |
|
Dry Cell R14 Metal Jacket 43gm/pc
|
|
| C1755 |
|
Dry Cell R20 Metal Jacket 85gm/pc
|
|
| C1756 |
|
Dry Cell R20 Metal Jacket 85.59gm/pc
|
|
| C1757 |
|
Dry Cell Batteries (Paper Polyester Jacket) Type D (R20)
|
|
| C1758 |
|
CNC/AMS Vertical Machining Centre with APC
|
|
| C1759 |
|
Shifted to Chemical Group
|
|
| C1760 |
|
Power Take-offs/Clutches
|
|
| C1761 |
|
CRCA Circles of Steel
|
|
| C1762 |
|
Agricultural Sprinklers mainly made of Brass
|
|
| C1763 |
|
Coils for Quarts Analogue Wrist Watch of Caliber 2030/2035
|
|
| C1764 |
|
Polyamide-Imide Enamel Overcoated Enamelled Copper Wire
|
|
| C1765 |
|
Dacrotised or other equivalent surface coated high tensile precision fastners Cold/Hot Forged Bolts/Screws All varieties
|
|
| C1766 |
|
Dacrotised or other equivalent surface coated high tensile precision fastners Cold/Hot Forged Nuts All varieties
|
|
| C1767 |
|
Disc Springs made of Cold Rolled (Annealed/unannealed) Non Alloy/Alloy Steel
|
|
| C1768 |
|
DELETED
|
|
| C1769 |
|
Stick Mixer (with plastic body)
|
|
| C1770 |
|
Tube Forming Rolls
|
|
| C1771 |
|
Shock Absorber/ Strut (Hydraulic/ Gas)
|
|
| C1772 |
|
Earth Moving Wheel Components, namely, Bead Seat Ring, Gutter Band Fixed Flange & Lock Ring
|
|
| C1773 |
|
Earth Moving Wheel Components, namely, Detachable Flange/ Loose Flange Centre Band Disc & Side Ring
|
|
| C1774 |
|
Disc Holder/ Guide made of copper, nickel and tin alloy (ASTM C-97800)
|
|
| C1775 |
|
Spacer Thrust made of 30%Glass filled Phenolic Moulding Powder
|
|
| C1776 |
|
Injector (Nozzle holder) with Nozzle for diesel Engine
|
|
| C1777 |
|
Suction Valve for Compressor
|
|
| C1778 |
|
Discharge Valve for Compressor
|
|
| C1779 |
|
Wheel Chair Components made out of Aluminium Extrusions frames/ cross bar / arm rest/ leg rest
|
|
| C1780 |
|
Magnet Retrieving
|
|
| C1781 |
|
Magnetic Tray
|
|
| C1782 |
|
Bi-Metallic Dial thermometer/ Mercury in Dial thermometer
|
|
| C1783 |
|
CNC Lathe
|
|
| C1784 |
|
Pest Repellent Model POBD-1-01
|
|
| C1785 |
|
Ferro Boron Cored Wire
|
|
| C1786 |
|
Steel Rolls for Cold Rolling Mill (2-Hi, 4-Hi, 6-Hi)
|
|
| C1787 |
|
Absorption Chillers of Various types (weight tobe indicated)
|
|
| C1788 |
|
Electric Generator and sub-assemblies thereof
|
|
| C1789 |
|
Vertical and/or Horizontal Pressure Leaf Filter with Accessories
|
|
| C1790 |
|
Copper Lug (Battery cable lug)
|
|
| C1791 |
|
Bueno Toner cartridge for photo copier
|
|
| C1792 |
|
Carburetor Assembly
|
|
| C1793 |
|
Aluminium Moulds for Plastic Products
|
|
| C1794 |
|
Enamelled copper wire with self bonding enamel of less than 0.1 mm diameter (not elsewhere specified)
|
|
| C1795 |
|
4 Fibre Single / Multimode Optical Fibre Armoured Cable Outer Dia 12.88 mm or above, 165 kg/km or above consisting of Minimum 3 PBT tubes of 2.8 mm OD or above
|
|
| C1796 |
|
12 Fibre Single / Multimode Optical Fibre Armoured Cable Outer Dia 12.88 mm or above, 165 kg/km or above consisting of Minimum 3 PBT Tubes of 2.8 mm OD or Above
|
|
| C1797 |
|
6 Fibre Single / Multimode Optical Fibre Armoured Cable Outer Dia 12.88 mm or above, 165 kg/km or above consisting of Minimum 3 PBT Tubes of 2.8 mm OD or Above
|
|
| C1798 |
|
(1) Compact Disk - Audio (2) Compact Disk - Vedio (3) Compact Disk - ROM
|
|
| C1799 |
|
Filter Cartridge: Cylindrical Air Intake Filter/ Pulse Jet Air Filter/ Conical Filter Cartridge/ Cylindrical Filter Cartridge
|
|
| C1800 |
|
Non-Aerosol Spray Pump/ dispensers
|
|
| C1801 |
|
Dumet wire ( Copper tube filled with Alloy Steel and Nickel)
|
|
| C1802 |
|
Ball Tips of Stainless Steel Wire of 2.3mm diameter
|
|
| C1803 |
|
Sulphur Cored Wire
|
|
| C1804 |
|
Cryocontainer/ Cryoseal Container/ Liquid Nitrogen Container/A.I Equipment/ Cryogenic Container Cryoseal Liquid Nitrogen Container made of Aluminium
|
|
| C1805 |
|
High Speed Steel (Cobalt Grade ) End Mills Dia 1 mm to 20 mm
|
|
| C1806 |
|
Electrolytic Tinplate Waste/waste printed /lacquered unprinted sheets cut to size for making components of round tin cans other than OTS cans
|
|
| C1807 |
|
Long Life Lamps (0-150 watts) life 16,000 hours to 20,000 hours)
|
|
| C1808 |
|
Dish Ends (Ellipsoidal or Circular Shape) made of Non-Alloy/Alloy/ Stainless Steel
|
|
| C1809 |
|
Zinc Builders Hardware Lacquered/ Powder Coated (T/C Pressure Die Cast & Zinc Alloy conforming to Z-3/Z-5 specification)
|
|
| C1810 |
|
Scalpel (Surgical Blade with Plastic handle & cover)
|
|
| C1811 |
|
Harrow Disc Notched
|
|
| C1812 |
|
Lacquered Tin Free Steel Sheet
|
|
| C1813 |
|
S.S. Perforated Apron for Tea Industry
|
|
| C1814 |
|
Embossed Sheets of Cold Rolled Non-Alloy Steel
|
|
| C1815 |
|
Wax Impregnated Carbon Electrodes for Dry Cell Battery
|
|
| C1816 |
|
Lead Cored Wire from Lead Ingots
|
|
| C1817 |
|
Aluminium Steam Sterilizer - Double Racks (pressure cooker type)
|
|
| C1818 |
|
Polyesterimide Enameled copper wire/ strip
|
|
| C1819 |
|
CNC Bushing C-1-1/2 Type
|
|
| C1820 |
|
Tapping Chucks WF 1 IKP
|
|
| C1821 |
|
Adapter Housing WEN 120 B.60
|
|
| C1822 |
|
Two Cubic Meter Standard bucket Wheel loader
|
|
| C1823 |
|
Hydraulic Excavator
|
|
| C1824 |
|
Lead Cored Wire
|
|
| C1825 |
|
Frame Assembly (Exhaust frame for Steam Turbine Generator)
|
|
| C1826 |
|
LPG Storage Bullets/ Tanks
|
|
| C1827 |
|
Kerosene Wick Stove and its parts
|
|
| C1828 |
|
Radiators for transformer made of stainless steel
|
|
| C1832 |
|
Chrome/ Nickle Plated Wire Wheel for all types of cars
|
|
| C1833 |
|
Deleted
|
|
| C1834 |
|
Telephone Cable of relevant size (pairs) having copper conductor - 0.5mm dia
|
|
| C1835 |
|
Telephone Cable of relevant size (pairs) having copper conductor - 0.65mm dia
|
|
| C1836 |
|
Telephone Cable of relevant size (pairs) having copper conductor - 0.90mm dia
|
|
| C1837 |
|
D.C. Motors
|
|
| C1838 |
|
Master Cylinder Assy.
|
|
| C1839 |
|
Steel Trunks (in CKD and SKD condition), with accessories/ fittings/ hardwares, such as, hasps, staples, corners, handles, slips, knobs fittings side flaps and flats
|
|
| C1840 |
|
Marsh Geophone Strings consisting of 12 SM-24 Basic Elements
|
|
| C1841 |
|
Marsh Geophone Strings consisting of 12 SM-4 Basic Elements (LD)
|
|
| C1842 |
|
Copper Bonded/ Coated Ground Steel Rods
|
|
| C1843 |
|
HRC Fuses
|
|
| C1844 |
|
Chafing Dishes/ Chafers (Round Shaped)
|
|
| C1845 |
|
Chafing Dishes/ Chafers (Rectangular Shaped)
|
|
| C1846 |
|
Waste Coupling for Sink
|
|
| C1847 |
|
S.S. Vaccum Jugs (without Handle & Lid) for Coffee/ Tea machines
|
|
| C1848 |
|
Injection Mould with Hot Runner System and Temperature Controller
|
|
| C1849 |
|
Vibratory Cutlery Polisher
|
|
| C1850 |
|
Synthetic Media Pocket
|
|
| C1851 |
|
Electrical Terminals (Rail Mounted)
|
|
| C1852 |
|
Stainless Steel Inner/ Outer Ring for Gasket
|
|
| C1853 |
|
Tube-cut-of-Blades (knives) made of High Speed Steel Sheet
|
|
| C1854 |
|
Plate Processor for offset printing industry
|
|
| C1855 |
|
Telephone Cable of relevant size (pairs) having copper conductor 0.398/ 0.4mm dia
|
|
| C1856 |
|
Telephone Cable of relevant size (pairs) having copper conductor 0.89/ 0.90mm dia
|
|
| C1857 |
|
Copper Sleeves (of High Conductivity 99.99% Pure Copper) as a component of Copper-T
|
|
| C1858 |
|
Ferro-Molybdenum Cored Wire
|
|
| C1859 |
|
Aluminium Redrawn Alloy Tube/ Pipes
|
|
| C1860 |
|
Transformer MS Tank/ Clamps
|
|
| C1861 |
|
Circles (Circular Blank/ Disc) made of CR Non-Alloy Steel Sheets/ Strips/ Wide Coils
|
|
| C1862 |
|
Automobile Radiator Parts made of Brass
|
|
| C1863 |
|
Graphite Cored Wire
|
|
| C1864 |
|
Automotive Head Lamps, Auxiliary Lamps, Work Lamps, Rubber Body Lamps for Motor Vehicles (with or without bulbs)
|
|
| C1865 |
|
Kapton 0.025mm x 20mm width x 500 Meters length per Roll (Polyamide film in cut length)
|
|
| C1866 |
|
Coblosam 315.64-05 containing: 1. Rhodorsil Resin 4085-0.027 kg/ Sq.Mtr. 2. Phlogophite Mica - 0.17 kg/ Sq.Mtr. 3. Hiblon Film HH 25-0-028 kg/ Sq.Mre. 4. Siccatif 9602-0.000093 kg/ Sq.Mtr.
|
|
| C1867 |
|
Coblosam 315.64-04 containing: 1. Rhodorsil Resin 4085-0.027 kg/ Sq.Mtr. 2. Phlogophite Mica - 0.126 kg/ Sq.Mtr. 3. Hiblon Film HH 25-0-028 kg/ Sq.Mre. 4. Siccatif 9602-0.000093 kg/ Sq.Mtr.
|
|
| C1868 |
|
Electric Storage Water Heater
|
|
| C1869 |
|
Auto Control Cable for seat applications
|
|
| C1870 |
|
Auto Control Cable ASM Hood Cable
|
|
| C1871 |
|
Deleted
|
|
| C1872 |
|
Empty Recessed Fluorescent fitting complete with Aluminium Louver
|
|
| C1873 |
|
Portable Electro Mechanical Power Tools
|
|
| C1874 |
|
Diesel Fork Lift 1.5 Ton to 10 Ton
|
|
| C1875 |
|
Cast Article made of Zinc Alloy
|
|
| C1876 |
|
Roto Glydring made of Glass filled PTFE Tube
|
|
| C1877 |
|
Vacuum Cleaner
|
|
| C1878 |
|
Automotive Steel Wheel Rims 12
|
|
| C1879 |
|
Deleted
|
|
| C1880 |
|
Welding accessories, such as, Electrode holder, chipping hammer, cable connector, earth clamp, ground clamp, cable ring, splicer hammer
|
|
| C1881 |
|
1 Inkjet Cartridges
|
|
| C1882 |
|
Asbestos Moulded Metallic Brake Lining
|
|
| C1883 |
|
Asbestos Moulded Metallic Clutch Facing
|
|
| C1884 |
|
Seamless Steel Casing and Tubing
|
|
| C1885 |
|
Water Cooler
|
|
| C1886 |
|
Zinc Concentrates
|
|
| C1887 |
|
Single/Double Walled Steel Tubes (Copper Coated)
|
|
| C1888 |
|
Ball Pen Tips of Nickel Silver Wire of 2.3mm diameter
|
|
| C1889 |
|
Carbon Electrode
|
|
| C1890 |
|
Copper Bus Bars
|
|
| C1891 |
|
Radiator made of Aluminium with Plastic Tank
|
|
| C1892 |
|
Welded Steel Link Chain
|
|
| C1893 |
|
Mica Heating Element (electrical heating element)
|
|
| C1894 |
|
Agricultural Tractor
|
|
| C1898 |
|
Forged Safty relief Valve for LPG Cylinder made of brass
|
|
| C1899 |
|
E.O.T. Crane
|
|
| C1900 |
|
Fabricated Articles made of SS not elsewhere specified
|
|
| C1901 |
|
High Grade, Annealed Sponge Iron Powder
|
|
| C1902 |
|
Finished/ Semi-Finished Ring Joint Gaskets made from Non-Alloy Steel Plates
|
|
| C1903 |
|
Hot Rolled Non-Alloy Steel Plate/ Sheet/ Strip/ Wide Coil
|
|
| C1904 |
|
Graphite Heat Exchanger (Cubical Block, Shell & Tube & Circular Block Type)
|
|
| C1905 |
|
Stainless Steel Braided Teflon Hose Assembly for automotive application
|
|
| C1906 |
|
Zinc Plated Liquid Tight Steel Fitting with Ferrule & Locknut (Connector) - Size 1/2
|
|
| C1907 |
|
Decanter Centrifuge
|
|
| C1908 |
|
Industrial Separator
|
|
| C1909 |
|
Lightening Arrestor (Surge Arrestor) Distribution Class
|
|
| C1910 |
|
Lightening Arrestor (Surge Arrestor) Discharge Class I
|
|
| C1911 |
|
Lightening Arrestor (Surge Arrestor) Discharge Class II
|
|
| C1912 |
|
Lightening Arrestor (Surge Arrestor) Discharge Class III
|
|
| C1913 |
|
Lightening Arrestor (Surge Arrestor) Discharge Class IV
|
|
| C1914 |
|
Metal Oxide Varistor ## (MOV) Distribution Class
|
|
| C1915 |
|
Metal Oxide Varistor ## (MOV) Distribution Class I
|
|
| C1916 |
|
Metal Oxide Varistor ## (MOV) Distribution Class II
|
|
| C1917 |
|
Metal Oxide Varistor ## (MOV) Distribution Class III
|
|
| C1918 |
|
Metal Oxide Varistor ## (MOV) Distribution Class IV
|
|
| C1919 |
|
Brake Lining for Motor Vehicles with Aramid and NBR
|
|
| C1920 |
|
Telephone Cables of different pair and Dia U/G BSW Cable, Not elsewher specified
|
|
| C1921 |
|
Polyurethane Type Air Filters
|
|
| C1922 |
|
Plastic Air Filters
|
|
| C1923 |
|
REVA electrically operated vehicle (four wheeler)
|
|
| C1924 |
|
Transmission Line Tower Hardwares and Accessories
|
|
| C1925 |
|
Metal Halide Lamp Double Ended Quartz Glass Shell 150 W
|
|
| C1926 |
|
Metal Halide Lamp Double Ended Quartz Glass Shell 70 W
|
|
| C1927 |
|
Fabricated Steel Hardware/ Structure/ Articles not elsewhere specified made out of MS CR Plates/ Sheets/ Coils/ Strips
|
|
| C1928 |
|
Distribution Type Fuel Injection Pump for Diesel Engines
|
|
| C1929 |
|
Hermetically Sealed Comressors for Refrigerators & Commercial Refrigeration Applications using Eco-friendly gases
|
|
| C1930 |
|
Zinc Ingots
|
|
| C1931 |
|
Copper/Aluminium Conductors screened with semi conducting compound, XLPE Insulated G.I Wire, Armoured PVC Sheathed Cable for above 1.1 KV
|
|
| C1932 |
|
Iron Ore including Processed Iron Ore
|
|
| C1933 |
|
Tungsten Wire (0.525 mm dia)
|
|
| C1934 |
|
Molybdenum Wire (0.82 mm dia
|
|
| C1935 |
|
Cast Basalt Liner Pipe
|
|
| C1936 |
|
Ferro Titanium Cored Wire
|
|
| C1937 |
|
Ball Pen Tips of Brass Wire
|
|
| C1938 |
|
Plastic Assembly Fitted with Cross Flow Fan, Mounting Bracket, Stepper Motor and Motor
|
|
| C1939 |
|
Galvanised Steel Tape (10 mm - 40 mm with)
|
|
| C1940 |
|
(I) Spring Brake Chamber Type-24/30 L/s (With two Diaphragms) Long Stroke (ii) Spring Brake Chamber Type - 24/30 S/S (With two Diaphragms) (iii) Spring Brake Chamber Type - 30/30 S/S (With two Diaphrams)
|
|
| C1941 |
|
Tapping Adaptor WES (Size 1)
|
|
| C1942 |
|
Tapping Adaptor WES (Size 2)
|
|
| C1943 |
|
Tapping Adaptor WEN (Size 1)
|
|
| C1944 |
|
Tapping Adaptor WE (Size 1)
|
|
| C1945 |
|
Tapping Adaptor WE (Size 2)
|
|
| C1946 |
|
Reversible Tapping Chucks TA 12
|
|
| C1947 |
|
Reversible Tapping Chucks TA 20
|
|
| C1948 |
|
Adaptor Sub-assembly WEN 101 BG
|
|
| C1949 |
|
Portable Generator/Internal Combustion Engine for Portable Generator/Pump Set run on Kerosine & Petrol
|
|
| C1950 |
|
Anode Slime containing Gold and Silver in Black powder form
|
|
| C1951 |
|
21 inches Colour Picture Tube (CPT) integrated with Deflection Yoke
|
|
| C1952 |
|
Seismic Cable- Type RSR 3 Cable double ended, 165 M long
|
|
| C1953 |
|
Hermetically sealed comprssor Pump Kit assembly
|
|
| C1954 |
|
Tube light ballast 18 watts & 36 watts weighing 451 grams
|
|
| C1955 |
|
Cupro Nickel Tubes
|
|
| C1956 |
|
High Chrome Castings & Grinding Media Balls for iron ore grinding mills
|
|
| C1957 |
|
LPG Regulator/ Coupling in CKD/ Assembled Condition
|
|
| C1958 |
|
Disposable Cylinder
|
|
| C1959 |
|
Pressure Die Cast/ Sand Cast Components/ Articles made of Aluminum Alloy
|
|
| C1960 |
|
Lead Alloy in the form of : Bar/ Anode/ Ingot/ Slab/ Pigs
|
|
| C1961 |
|
Bismuth Alloy in the form of : Rod/ Wire/ Strips/ Sheet/ Foil/ Preforms/ Section Tube
|
|
| C1962 |
|
Lead Alloy in the form of : Rod/ Wire/ Sheet/ Foils/ Reforms/ Sections/ Tube
|
|
| C1963 |
|
Cadmium Alloy in the form of : Bar/ Anode/ Ingot/ Slab/ Pigs
|
|
| C1964 |
|
Cadmium Alloy in the form of : Rod/ Wire/ Strip/ Sheet/ Foil/ Preforms/ Sections/ Tube
|
|
| C1965 |
|
Tin alloy in the form of : Rod/ Wire/ Strip/ Sheet/ Foil/ Preforms/ Section/ Tube
|
|
| |
|
| |
| |
