Chapter 4 - DUTY EXEMPTION / REMISSION SCHEME - Foreign Trade Procedure 2015-2020 (From 1-4-2015 to 4-12-17)

CHAPTER 4 DUTY EXEMPTION / REMISSION SCHEME 4.01 Policy Policy relating to Duty Exemption / Remission Schemes is prescribed in Chapter 4 of Foreign Trade Policy. 4.02 General Provision 11 [ (i) Application for grant of Advance Authorisation / Special Advance Authorization for export of Articles of Apparel and Clothing Accessories / Advance Authorisation for Annual Requirement / Duty Free Import Authorisation (DFIA) shall be filed online (digitally signed) by IEC holder to the concerned jurisdictional Regional Authority as per Appendix IA, Applicant could be either registered office or head office or a branch office or a manufacturing unit of the IEC holder. ] (ii) Applicant shall upload documents as prescribed in ANF 4A, if any, at the time of online filing of application. No physical copy of application is required to be submitted to Regional Authority. (iii) In case an applicant is not able to upload any document as given in Appendix 4E electronically for fixation of adhoc norms / standardization of norms, then only such documents may be submitted in physical form to the concerned Norms Committee in DGFT headquarters. 4.03 Applicant details Where applicant is a branch office or a manufacturing unit, name of branch office or manufacturing unit should appear in electronic RCMC and in IEC of the applicant. 4.04 Advance Authorisation Applicant shall file application online in ANF 4A. Same form is applicable where Standard Input Output Norms (SION) have been notified or on the basis of adhoc norms or on self declaration basis as per paragraph 4.07 of Hand Book of Procedures. 4.05 Advance Authorisation for items which are otherwise prohibited for export (i) Items covered under Chapter 7 and Chapter 15 of ITC (HS) Schedule 2, which is prohibited for export, may be allowed to be exported under the advance authorization scheme. Export shall be allowed subject to pre-import condition under notified SION/prior fixation of norms by Norms Committee in terms of paragraph 4.06 of Hand Book of Procedures. Import and Export would be permitted only through EDI enabled ports. (ii) The Export obligation period (EOP) of advance authorizations issued for such items shall be 90 days from the date of clearance of import consignment and no extension in EOP shall be allowed. Such import shall be subject to actual user condition and no transfer of imported raw material, for any purpose, including job work, shall be permitted. In case of non-fulfilment of EO/ non-achievement of stipulated value addition, a penalty equal to five times of the CIF value of the imported material, corresponding to the shortfall in EO, shall be imposed in addition to the applicable duty and interest. Provisions of Paragraph 4.49 of Handbook of Procedures shall not be applicable in this case. 14 [4.06 Fixation of Norms (i) In case where norms have not been notified or where applicant wants to get the ad-hoc norms fixed before making an application for Advance Authorisation, application in ANF 4B , along with prescribed documents, shall be uploaded online to concerned Norms Committee (NC) in DGFT headquarters for fixation of SION/Adhoc norm. Details of Norms Committees along with products groups dealt by each Norms Committee and respective email addresses for correspondence relating to norms fixation is as follows: Norms Committees (NC) in DGFT headquarters For fixation / revision / amendment of norms of Export Products under following ITC HS Chapters Email addresses for communication with respective Norms Committee NC-1 81 to 84, 86 to 93 nc1.dgft@nic.in NC-2 72 to 76, 78 to 80, 85 nc2.dgft@nic.in NC-3 29, 30 nc3.dgft@nic.in NC-4 27, 28, 31 to 38, 44 to 49, 68 to 71 nc4.dgft@nic.in NC-5 41 to 43, 50 to 67 nc5.dgft@nic.in NC-6 I to 26, 94 to 98 nc6.dgft@nic.in NC-7 39, 40 nc7.dgft@nic.in (ii) An applicant shall indicate a valid email address for communication purpose and ensure that this email address is active. (iii) The decisions of Norms Committees shall be available on the website of DGFT (http://dgft.gov.in) periodically and the applicants shall update themselves the status of norms fixation in respect of Authorisation obtained by them. (iv) Exporters / EPC shall provide data to the Norms Committee concerned for the fixation of SION/ Adhoc Norms for an export product. Norms Committee shall endeavour to fix SION or adhoc norms on receipt of complete data. Any adhoc norm fixed under this para, on the basis of an application made by an exporter shall be valid for one authorisation for which such application is made and no repeat authorisations shall be issued. However, Norms Committee can specify extended validity period of not more than two years from the date of fixation of such adhoc norms, for grant of further authorisations under such norm. (v) Norms Committees shall also function as recommendatory authority for notification of SION and DGFT may notify such norms from time to time. (vi) It is mandatory for industry / manufacturers/ EPCs to provide production and consumption data etc. for the past three years, as may be required by DGFT for fixation of SION. Otherwise, applicants shall not be allowed to take benefit of Advance Authorisation scheme for taking repeat Advance Authorisations on self-declared basis. Norms Committee may also seek data from Central Excise (CBEC). (vii) Experts may be invited from Scientific and Technological institutions as members of Norms Committee for fixation of Norms. ] 4.07 Self Declared Authorisations where SION does not exist (i) Regional Authority may also issue Advance Authorisation where SION is not fixed, based on self declaration by applicant. Wastage so claimed shall be subject to wastage norms as decided by Norms Committee. The applicant shall submit an undertaking to abide by decision of Norms Committee. The provisions in this regard are given in paragraph 4.03 and 4.11 of FTP. (ii) In case of revision / rejection, applicant shall pay duty and interest as notified by DoR within thirty days from the date of hosting of Norms Committee decision on DGFT website. (iii) No Authorisation under this paragraph will be issued by Regional Authority for items listed in paragraph 4.11of FTP. 4.08 Cases involving Acetic Anhydride, Ephedrine and Pseudo- ephedrine as inputs. (i) Where Acetic Anhydride, Ephedrine and Pseudo- ephedrine is required as an input for import, applications shall be filed with Regional Authority concerned. After filing application online, printed copy of such application shall also be simultaneously endorsed by applicant to (a) Drug Controller of India, Nirman Bhawan, New Delhi, (b) Narcotics Commissioner, Central Bureau of Narcotics, Gwalior (c) respective Zonal Director of Narcotics Control Bureau. The applicant should declare that they would maintain prescribed records / documents and also submit prescribed returns to the relevant authorities, within time as prescribed by law from time to time. (ii) Regional Authority shall endorse a copy of such Advance Authorisation to the above three agencies. Regional Authority shall also endorse a condition that before effecting imports, No Objection Certificate shall be obtained from Drug Controller and Narcotics Commissioner of India. 4.09 Cases requiring Sanitary Import Permit. (i) Where import of meat and meat products of any kind including fresh, chilled and frozen meat, tissue or organs of poultry, pig, sheep, goat; egg egg powder; milk milk products; bovine, ovine and caprine embryos, ova or semen; and pet food products of animal origin has been sought as an input under Advance Authorisation, the Regional Authority, while issuing Advance Authorisation shall endorse a condition that before effecting imports of any of these inputs, Sanitary Import Permit shall be obtained from the Department of Animal Husbandry, Dairying and Fisheries (DAHDF). (ii) Regional Authority shall also endorse a copy of authorisation to DAHDF, Krishi Bhawan, New Delhi. 15 [4.10 Advance Authorisation for applicants with multiple units (i) Transfer of any duty free material imported or procured against Advance Authorisation from one unit of a company to another unit for manufacturing purpose shall be done with prior intimation to jurisdictional Customs Authority. Benefit of CENVAT shall not be claimed on such transferred input. (ii) Deleted (iii) Deleted (iv) Deleted (v) Imported duty free inputs can be taken from the port / domestic supplier's premises to the factory or the premises of the authorization / co-authorisation holder or the factory of the supporting manufacturer (whose name is endorsed in the authorization or allowed by the Jurisdictional Customs authority). However, such duty free material imported or procured against advance authorization can also be taken from the port directly to the project site of the project authority, subject to furnishing a bond to the customs authority at the port of import and other documents / declaration and other provisions as per Department of Revenue guidelines.] 4.11 Advance Authorisation for Free of Cost and Paid Material Authorisations granted in terms of paragraph 4.19 of FTP, a specific endorsement by Regional Authority shall be made on exchange control copy of Advance Authorisation disallowing remittances for material being supplied free of cost. All imported inputs excluding wastage shall be utilised in manufacturing of export product. 4.12 Entitlement (a) Maximum CIF value of one or more authorisations to be issued under paragraph 4.07 of Hand Book of Procedures shall be as under: (i) For Status Holders - upto 300% of FOB and / or FOR value of preceding year s exports and /or supplies. (ii) Other than Status Holders - upto 300% of FOB or ₹ 10 crore and / or FOR value of preceding year s exports and/or supplies, whichever is higher. (iii) Once adhoc norms are fixed by Norms Committee, value limits mentioned in sub paragraph (i) and (ii) above, would not be applicable to Advance Authorisations issued under paragraph 4.07 of Hand Book of Procedures. Value of such authorisations, subsequent to fixation of norms by Norms Committee, may be enhanced, if the Advance Authorisation was issued restricting the CIF value to maximum of value in sub-paragraph (i) (ii) above. (iv) In such cases Authorisations shall be issued by Regional Authority concerned under Adhoc Norms Fixed category and application copies need not be forwarded to NC for fixation / ratification of norms. Where the application has already been forwarded before the ratification of Norms, the Regional Authority shall finalise the case as per the norms subsequently ratified by NC in a similar case of the party. (v) Authorisation holder in such cases shall be entitled for further authorisation (s) as per norms ratified by Norms Committee without need for subsequent ratification by Norms Committee. In such cases the applicant would file application under Adhoc Norms Fixed category to the Regional Authority concerned. (vi) Where Norms Committee has already ratified norms for same export and import products in respect of an authorization obtained under paragraph 4.07, such norms shall be valid for a period of two years reckoned from the date of ratification. The same applicant can avail repeat authorisations based on such adhoc norms. Another exporter, however, cannot be granted authorization by Regional Authority based on such adhoc norms. (vii) 16 [ Wherever an applicant has applied for components on net-to-net basis with accountability clause and such cases fall under paragraph 6 of General Note for all Export Products, the same need not be referred to Norms Committee for fixation of norms. However, exporters shall indicate clearly details of such components imported on net-to-net basis with accountability clause in the export/supply documents namely Shipping Bills, Bill of Exports, Tax invoice for export/supplies prescribed under the GST rules evidencing that these imported inputs have been exported. ] 4.13 Authorisation in Excess of Entitlement An applicant shall be entitled for authorisation in excess of entitlement of CIF mentioned in paragraph 4.12(a) above subject to furnishing of 100% Bank Guarantee to Customs authority to cover exemption from customs duties. Regional Authority shall made a specific endorsement to this effect on authorisation. This provisions shall also apply to Status Holders. 17 [4.14 Application and On-line Inter-Ministerial Consultations for fixation of norms / adhoc norms (i) Application filed online by the applicant shall be forwarded electronically to the concerned Technical / Administrative Ministry / Department /Scientific and Technological institutions or any other agency by the respective Norms Committee in the DGFT headquarters within three days. (ii) The concerned Technical / Administrative Ministry / Department / Scientific and Technological institutions or any other agency as the case may be, may communicate its views / comments / recommendations within 45 days electronically/online. In case no comments are received within 90 days, Norms Committee may take a view based on the facts available on record. ] 4.15 Undertaking Applicant shall give an undertaking that he shall abide by norms fixed by Norms Committee and accordingly take following actions without any demur: (i) Pay customs duty saved, together with interest as notified by DoR, on excess inputs as per norms fixed by NC. However, in case Norms Committee allows lower norms for one, more, or all inputs authorisation holder will have option to undertake additional EO in proportion to excess inputs. (ii) In case application is rejected by Norms Committee, authorization holder shall pay duty saved amount along with interest on inputs, as applicable as notified by DoR. In cases of domestically procured inputs, the amount to be paid will be based on notional customs duty payable on the inputs procured. (iii) Applicant shall deposit amount as per paragraph 4.49(a)(ii) of HBP in case the inputs were not freely importable. This amount is in addition to the amounts in sub-paragraph (i) above. 4.16 Time limit for fixation of norms by Norms Committees (i) Where norms are not finalised by Norms Committee within four months from the date of receipt of complete application along with documents / technical details as per Appendix 4E, norms as applied for may be treated as final. (ii) In case application for fixation of adhoc norms / SION is rejected on ground of non-furnishing of required documents/ information to Norms Committee or technical authority represented in Norms Committee, authorisation holder shall be liable to pay customs duty with interest as notified by DoR and amount as per paragraph 4.49(a)(ii). In case SION for the said product is notified, SION would be made applicable for deciding wastage norms and EO. (iii) 18 [In cases where entitlement of the applicant for grant of Advance Authorisation as per paragraph 4.12 was lower than the quantity of input applied by the applicant under Advance Authorisation and export obligation is completed pending fixation of norms by Norms Committee, entitlement for authorisation as given in paragraph 4.12 may be re-credited upon production of documentary evidence (copies of Shipping bill / bill of export/_Tax invoice for supply prescribed under GST rules) showing fulfilment of export obligation in respect of previous authorisations. However, bond waiver / redemption shall not be allowed pending fixation of norms in such cases.] 4.17 Time limit for Representation Applicant may file representation against the decision of the Norms Committee with regard to the fixation of norms within a period of 90 days from the date of hosting of decision on DGFT website. Representation beyond 90 days shall be subject to payment of composition fee of ₹ 5000/-. 4.18 Provision for Pharmaceutical Products Regional Authority may issue Advance Authorisation for pharmaceutical products manufactured through Non-Infringing (NI) process. A manufacturer exporter can avail the benefit of this provision whether the SION or the adhoc norms (under self declared basis in terms of paragraph 4.07 of the Hand Book of Procedures) for the said product is available or not. Input combination permitted under NI process, as approved by the concerned agency of the regulated markets , shall be exporter specific and country specific and shall be available only when the exports are destined for the same country. 4.19 Application Processing (i) An application for grant of an advance authorisation under paragraph 4.18 shall be filed online in ANF 4E to concerned Regional Authority along with the documents uploaded therein. (ii) Input combination permitted under NI process for manufacturing the product shall be certified by the Chartered Engineer (Chemical) after due verification of the details of each input and its quantity as given in Abbreviated New Drug Application (ANDA) / Drug Master File (DMF) of the applicant. The Chartered Engineer (Chemical) will certify the details as per Appendix 4L prescribed in Hand Book of Procedures. Regional Authority shall cross verify the requirement of inputs as per the details given in the application and with Chartered Engineer Certificate accompanying the application and issue the authorization. Regional Authority shall not forward such application to Norms Committee and the inputs and export product so allowed by Regional Authority, shall be treated as input combinations permitted under NI Process. 4.20 Redemption of Authorisation issued under paragraph 4.18 HBP 19 [ Provisions contained in paragraph 4.49 of Hand Book of Procedures, 2015-20, except sub-paragraph (f), shall be applicable. Regional Authority shall compare the details of Appendix 4-I, duly verified and certified by the jurisdictional Customs Authority, with that of the inputs made/allowed in the authorisation, before allowing redemption or Bond-waiver against individual advance authorization issued for pharmaceutical product(s) manufactured through NI process. As a result of the verification process, in case, it is found that the authorisation holder has consumed lesser quantity of inputs than imported, authorisation holder shall be liable to pay customs duty on unutilized imported material, along with interest thereon as notified by DOR, or effect additional export within the EO period to account for the export of the material remaining un utilized. However, for the Customs duty component, the authorisation holder has also the option to furnish valid duty credit scrip issued under Chapter 3 of FTP ] 4.21 Maintenance of Proper Accounts 20 [ Every Advance Authorisation holder shall maintain a true and proper account of consumption and utilization of duty free imported / domestically procured inputs against each authorisation as prescribed in Appendix 4-I . This record in Appendix 4-I format, duly verified and certified by the jurisdictional Customs Authority, shall be submitted to the concerned Regional Authority at the time of filing application for redemption / bond waiver. Regional Authority shall compare the details of Appendix 4-I, with that of the inputs allowed in the authorisation, before allowing redemption or bond waiver against individual authorization. Such records shall be preserved for a period of at least three years from the date of redemption. ] 4.22 Standardisation of Adhoc Norms (a) For standardization of norms, an application in ANF 4B shall be filed online along with complete data. Such applications shall be made to concerned Norms Committee in DGFT headquarters. (b) Import of fuel may also be allowed with actual user condition under SION by Norms Committee subject to following: (i) Facility of import of fuel shall be allowed only to manufacturer having captive power plant. (ii) In cases where SION specifically allows fuel, same shall be permitted under Advance Authorisation. However, if fuel is not covered specifically under SION, it may be allowed as per general fuel Policy for products covered under SION or under paragraph 4.07 above. (iii) Applications for fixation of fuel entitlement for new sectors and modification of the existing entitlement as per General Note for Fuel in Hand Book of Procedures shall be filed online to the Norms Committee along with requisite data in ANF 4B. 21 [(iv) In case an applicant is not able to upload any prescribed document then such documents may be submitted in physical form to the concerned authority.] 4.23 Modification of SION An application for modification of existing SION shall be filed online in ANF 4B to the concerned Norms Committee in DGFT headquarters. 4.24 Amendment of Export item and inputs (i) An application for amendment of an export item or input or quantity of input under SION or under adhoc Norms shall be filed online in ANF 4B. (ii) Applicant would give justification for seeking amendment and Regional Authority would consider it with specific approval of Head of Office. In case of any major change in input or request for more wastage to that allowed under SION or adhoc norm, same should be referred to Norms Committee for ratification. 4.25 Revision of SION by NC NC may identify SIONs which in its opinion are required to be reviewed. Exporters are required to submit revised data in ANF 4B for such revision. It is mandatory for industry / exporter(s) to provide production and consumption data etc. as may be required by DGFT / EPC for revision of SION. Otherwise, applicant shall not be allowed to take benefit of Advance Authorization scheme. 4.26 Description of an Advance Authorisation An Advance Authorisation shall, inter-alia, specify: (a) Names and description of items including specifications, where applicable, to be imported and exported / supplied; (b) Quantity of each item to be imported or wherever quantity cannot be indicated, value of item shall be indicated. Wherever, quantity and value of individual inputs is a limiting factor in SION, same shall be applicable; (c) Aggregate CIF value of imports; and (d) FOB / FOR value and quantity of exports / supplies. 22 [4.27 Exports/Supplies in anticipation or subsequent to issue of an Authorisation. (a) Exports / supplies made from the date of EDI generated file number for an Advance Authorisation, may be accepted towards discharge of EO. Shipping /Supply document(s) should be endorsed with File Number or Authorisation Number to establish co-relation of exports / supplies with Authorisation issued. Export/supply document(s) should also contain details of exempted materials/inputs consumed.] (b) If application is approved, authorisation shall be issued based on input / output norms in force on the date of receipt of application by Regional Authority. If in the intervening period (i.e from date of filing of application and date of issue of authorisation) the norms get changed, the authorization will be issued in proportion to provisional exports / supplies already made till any amendment in norms is notified. For remaining exports, Policy / Procedures in force on date of issue of authorisation shall be applicable. (c) The export of SCOMET items shall not be permitted against an Authorisation until and unless the requisite SCOMET Authorisation is obtained by the applicant. 4.28 Exporters Risk Exports / supplies made in anticipation of grant of an Advance Authorisation shall be entirely on risk and responsibility of exporter. 4.29 Admissibility of drawback in case of rejection of application Customs authorities in terms of DoR rules against shipping bills filed and processed under an Advance Authorisation, in case application for an Advance Authorisation is rejected or modified by Regional Authority, may permit drawback. 4.30 Advance Authorisation or DFIA for Intermediate Supplies (a) Application for grant of Advance Authorisation or DFIA for Intermediate supply may be made on the basis of a tie-up arrangement with an ultimate exporter (physical / deemed) holding an Advance Authorisation or DFIA. Regional Authority concerned shall consider such requests. (b) Advance Authorisation or DFIA for Intermediate supply shall be issued after making Authorisation of ultimate exporter invalid for direct import of item, to be supplied by intermediate manufacturer. In such case, a copy of the invalidation letter will be given to ultimate exporter holding Authorisation and copy thereof will be sent to intermediate supplier as well as Regional Authority of intermediate supplier. Intermediate Authorisation holder in such case has an option either to supply intermediate product to the holder of Advance Authorisation (i.e ultimate exporter) or DFIA or to export (physical / deemed) directly. Intermediate supplier can also supply the product(s) directly to the port for export by the ultimate exporter (holder of Advance Authorisation or DFIA). In such cases, shipping bill shall be in the name of the ultimate exporter with the name of intermediate supplier endorsed on it. (c) Facility of Advance Authorisation shall be available even in cases where intermediate supplier has supplied or intend to supply material subsequent to fulfillment of EO by exporter holding Advance Authorisation / DFIA from where invalidation letter was issued. 4.31 Advance Release Order (ARO) Application shall be filed online in ANF 4A to Regional Authority concerned for grant of ARO to procure inputs from indigenous sources / STEs. 4.32 Details to be given for issue of ARO (a) Application shall specify: (i) Name, description including specifications, where applicable, and quantity of items and (ii) Individual value of items to be procured. (b) An ARO may be issued along with Advance Authorisation / DFIA or subsequently, and its validity shall be co-terminus with validity of Advance Authorisation / DFIA. (c) An ARO issued for procurement of an individual item shall be automatically valid for procurement from one or more indigenous sources. 4.33 Back to Back Inland Letter of Credit (L/C) Exporter may alternatively avail facility of a back to back inland letter of credit from banks. An Advance Authorisation / DFIA holder may approach a bank for opening an inland letter of credit (L/C) in favour of an indigenous supplier. 4.34 Endorsement by Banks under Back to Back LC (a) Before opening the L/C, bank will ensure that Advance Authorisation holder has executed BG/LUT and an endorsement to that effect has been made on the Authorisation. (b) Execution of BG / LUT shall not be required against transferable DFIA. After opening inland L/C, bank shall make following endorsement on Exchange Control and Customs copy of Advance Authorisation / DFIA: Value of this Advance Authorization / DFIA stands reduced by a sum of Rs. ___, being value of inland L/C No.___ opened today by authorization holder in favour of M/s ____ (name and address of indigenous supplier). (c) Authorisation shall be invalidated by bank for direct import only in respect of full quantity and value of an item being sourced indigenously. (d) Original Letter of credit (L/C) may be retained by bank for negotiation and only non-negotiable copy of L/C may be given to indigenous supplier. (e) Responsibility of bank shall be confined to making endorsement. Bank shall not be liable for any misrepresentation or false statement made by authorisation holder while requesting bank to make endorsement. Inland L/C opened by bank in favour of indigenous supplier shall not be cancelled for any reason whatsoever. (f) Non negotiable copy of inland L/C together with photocopy of Advance Authorisation / DFIA duly carrying endorsements made by bank shall be sufficient for indigenous supplier to claim deemed export benefits. L/C issued shall be entitled to benefits given in paragraph 7.03 and 7.04 of FTP, as applicable. (g) Where import of gold / silver is permitted as an input under this scheme, they can be sourced through nominated agencies (as given in under Schemes for Gems and Jewellery Sector in Chapter-4 of FTP) for supply against the Advance Authorisations issued. Before supply of material, nominated agencies should follow the same procedures given above under this paragraph. 4.35 Facility of Supporting Manufacturer/ Jobber/co- licensee (a) Imported material may be used in any unit of holder of Advance Authorisation subject to condition of paragraph 4.10 of this Handbook or jobber / supporting manufacturer provided same is endorsed on authorisation by Regional Authority. If applicant desires to have name of any manufacturer or jobber added to authorisation, he may apply. Such endorsement shall be mandatory where prior import before export is a condition for availing Advance Authorisation scheme and authorisation holder desires to have material processed through any other manufacturer or jobber. (b) Upon such endorsement made by Regional Authority, authorisation holder and co-authorisation holder shall jointly and severally be liable for completion of EO. Any one of co-authorisation holders may import goods in his name or in joint names. BG/LUT shall also be furnished in their joint names. 23 [ (c). If authorisation holder is registered under GST Act, he has an option of getting names of jobber endorsed by jurisdictional Customs authority as per GST Rules in lieu of Regional Authority's endorsement. In case manufacturer exporter holding authorisation is not registered / not required to be registered under GST Act, job work may be allowed after endorsement of supporting manufacturer's name in the authorisation from RA concerned. However, authorisation holder shall be solely responsible for imported items and fulfilment of EO. ] 4.36 Acceptance of BG/LUT (a) Regional Authority concerned will endorse on the reverse of Advance Authorisation at the time of issue of authorisation about acceptance of undertaking given by applicant in relevant ANF. Authorisation holder shall execute Bank Guarantee / Legal Undertaking, as the case may be, in terms of paragraph 2.29 of Hand Book of Procedures. (b) 24 [In case BG / LUT has been redeemed, Advance Authorization holder can get duty free inputs processed from any manufacturer under Actual User condition as per job work regulations prescribed in terms of provisions of GST Acts under intimation to the Customs authority. However, such restriction shall not be applicable in case of transferable DFIA holder.] 4.37 Port of Registration (a) Advance Authorisation shall be issued for purpose of import and export through one of sea ports or airports or ICDs or LCS specified below. Authorisation holder shall register authorisation at the port specified in authorisation and thereafter all imports against said authorisation shall be made only through that port, unless the authorisation holder obtains permission from customs authority concerned to import through any other specified port. However, exports may be made through any of the specified ports. Sea Ports: Bedi (including Rozi-Jamnagar),Chennai, Dahej, Dharamtar, Ennore (Tamil Nadu), Haldia, Jamnagar, Kakinada, Kandla, Kochi, Kolkata, Krishnapatnam, Mangalore, Marmagoa, Muldwarka, Mumbai, Mundhra, Nagapattinam, Nhava Sheva, Okha, 1 [Paradeep], Pipavav, Porbander, Sikka, Surat (Magdalla), Tuticorin, Vadinar, Vishakhapatnam, Kattupalli Sea Port (Tamil Nadu). Air-ports: Ahmedabad, Bangalore, Bhubaneshwar, Calicut Airport (Kerala), Chennai, Coimbatore Air Cargo Complex, Dabolim (Goa), Delhi, Hyderabad, Indore, Jaipur, Kochi, Kolkata, Lucknow (Amausi), Mumbai, Nagpur, Rajasansi (Amritsar), Srinagar, Trivandrum, Varanasi, Vishakhapatnam. ICDs: Agra, Ahmedabad, Anaparthy, Arakkonam (Tamil Nadu), Bangalore, Babarpur, Bhadohi, Bhatinda, Bhilwara, Bhiwadi, Bhusawal, Chettipalayam (Tamil Nadu), Chheharata (Amritsar), Coimbatore, Dadri, Delhi, Dighi (Pune), Dappar, Dera Bassi, Dhannad Rau (District Indore), Daulatabad, (Wanjarwadi and Maliwada), Durgapur (Export Promotion Industrial Park), Faridabad, Garhi Harsaru, Guntur, Guwahati (Amingaon), Hyderabad, Irugur Village (Tamil Nadu), Jaipur, Jallandhar, Jamshedpur, Jodhpur, Kanpur, Karur, Kheda (Pithampur, District Dhar), Kota, Kundli, Loni (District Ghaziabad), Ludhiana, Madurai, Mallanpur, Mandideep (District Raisen), Merripalem, Guntur District(AP), Miraj, Moradabad, Nagpur, Nasik, Pimpri (Pune), Pitampur (Indore), Patli (Gurgaon) Pondicherry, Raipur, Rewari, Rudrapur (Nainital), Salem, Singanalur, Surajpur, Surat, Talegoan (District Pune), Thudiyalur (Tamil Nadu), Tirupur, Todiarpet (TNPM), Tuticorin, Udaipur, Vadodara, Varanasi, Veerapandi (Tamil Nadu), Waluj (Aurangabad) 9 [ Hosur (Tamil Nadu) and Nattakkam Village (Kottayam Taluk and District) ]. LCS: Agartala, Amritsar Rail Cargo, Atari, Chengrabanda, Dawki, Ghojadanga, Hilly, Jogbani, Mahadipur, Nautanva (Sonauli), Nepalganj Road, Petrapole, Ranaghat, Raxaul, Singhabad, Sutarkhandi. SEZ: As notified by Central Government any SEZ can be a specified port for import and export. (b) Commissioner of Customs may permit imports and exports from any other seaport / airport / ICD or LCS. (c) For imports from Airport / Seaport / ICD / LCS other than port of registration, a TRA shall be issued by the customs authority at the port of registration to customs authority at port of import. However, this requirement of TRA shall not be required if the port of registration and port(s) of imports are EDI enabled and the authorisation holder has registered its authorization. 40 [4.38 Facility of Clubbing of Authorisations (i) No clubbing of Authorisations issued on or before 31 st March, 2009 shall be allowed. (ii) Request for clubbing shall be made in ANF - 4C to the concerned RA who has issued the Authorisations. (iii) Facility of clubbing of Advance Authorisations shall be available only for redemption / regularisation of such Authorisations and no further import or export shall be allowed. (iv) Facility of clubbing shall also be available for Advance Authorisations for Annual Requirement issued during Foreign Trade Policy period 2009- I4 and 20 I5-20, wherever exports and imports have taken place as per Standard Input Output Norms (SION) notified. (v) Only Authorisations under which similar duty exemption has been availed shall only be allowed to be clubbed. Such Authorisations may pertain to different financial years. (vi) In case, exports are made outside EO period of any Authorisation, EO extension may be allowed before clubbing of such authorisation, as per Para 4.42 of Handbook of procedures on payment of composition fee. (vii) Only such Advance Authorisations shall be clubbed where exports under all Authorisations have been made within the initial/ extended EO period of the earliest issued Authorisation. (viii) Clubbing shall be permitted only when there is shortfall in fulfillment of export obligation occurred in first authorisation and excess exports are made in subsequent Authorisations. However, this condition may not be insisted when validity period (for import) of Authorisations runs concurrently and imports made in subsequent authorisation falls within validity period (for import) of first authorisation and such import made within validity period of first authorisation are on pro-rata, equal to or in excess to the extent of exports made in first authorisation. Subsequent Authorizations issued after expiry of validity of first Authorisation shall not be allowed to be clubbed. (ix) Clubbing of Authorisations issued with different EO periods shall also be allowed. (x) Accounting of exports made outside expiry of initial or extended EO period of earliest issued authorisation shall not be taken into consideration for EO fulfillment after clubbing of such Authorisations. (xi) Inputs which are common in all Authorisations shall only be clubbed and duty free inputs shall be accounted for as per SION/Ad-Hoc Norms fixed by NC. In other words all inputs covered in all Authorisations need not be same. (xii) Minimum value addition as prescribed in FTP and Procedures for the export product will be required to be maintained on clubbing. Upon clubbing, if shortfall in value or quantity is noticed, the same shall be regularized under the provisions of Para 4.49 of HBP 2015-20. (xiii) After clubbing, Authorisations shall for all purposes, be deemed to be one Authorisation. The value addition would be calculated on the basis of total CIF and total FOB arrived at after clubbing the Authorisations. (xiv) No clubbing shall be permitted in respect of Authorisations where misrepresentation / fraud have come to the notice of RA. Further, no clubbing of Authorisations, where EODC/redemption letter has already been issued or adjudication orders have already been passed by RA/Customs Authority, shall be permitted. (xv) Additional provisions for clubbing of Authorisations covered under Appendix-30A (issued under FTP 2009-14) / Appendix-4J (issued under FTP 2015-20) and Authorisations issued with EOP less than 18 months: (a) Export obligation period of clubbed Authorisations shall be reckoned from the date of earliest import in any of the Authorisations proposed to be clubbed. (b) Clubbing of such Authorisations shall be allowed provided all exports are completed within initial/extended Export Obligation period reckoned from date of earliest import in any of the Authorisations proposed to be clubbed.] 4.39 Enhancement/ Reduction in the value of Advance Authorisation (a) In respect of an Advance Authorisation, Regional Authority concerned (as per their financial powers) may consider a request: (i) for enhancement / reduction in CIF value of Advance Authorisation; (ii) enhancement / reduction in CIF value, quantity of inputs, FOB value and quantity of exports of an Advance Authorization. However, VA after such enhancement does not fall below minimum VA stipulated (for the export product) in FTP and Hand Book of Procedures laid thereunder and there is no change in input-output norms and FTP under which Advance Authorisation was issued. (b) However, in case of Advance Authorisation (s) issued prior to 27.8.2009 under the FTP, 2004-09, the following conditions shall apply for any enhancement in the value of the authorisation: (i) Wherever exports are on or subsequent to 27.8.09, enhancement in CIF / FOB values shall be subject to a minimum VA of 15% or the VA prescribed in Appendix 4D of current HBP, whichever is lower, for that component of exports. (ii) Wherever exports are prior to 27.8.09, enhancement in CIF / FOB values shall be subject to a minimum VA of 15% or the VA prescribed in Appendix 4D of current HBP, or the VA declared in the original Advance Authorisation application, whichever is lower. (c) Request for pro-rata enhancement in value and quantity may be made either before or after exports. In such cases where there is a change in SION prior to export of said product, pro-rata enhancement shall be given after calculating entitlement on revised SION. (d) Application for the enhancement in CIF or FOB value of Authorisation / reduction in the value of Authorisation / EOP Extension / Revalidation of Authorisation shall be filed online in ANF 4D to concerned Regional Authority. 4.40 Application fee for enhancement Application fee payable for enhancement would be on the difference in CIF values of original and final Authorisation. However, no application fee would be charged if value of Authorisation is being reduced or applicant has already paid maximum fee of ₹ 1,00,000 for Advance Authorisation / DFIA. 4.41 Revalidation of Authorisation (a) Regional Authority may consider a request of original Authorisation holder and grant one revalidation for six months from expiry date. Request(s) for revalidation of Authorisation shall be filed online in ANF 4D. (b) In case of revalidation of advance authorization issued prior to 27.8.2009 (FTP 2004-2009) , it should be ensured that VA is maintained at 15% (and as per details mentioned in paragraph 4.09 of FTP) or as stipulated in the Advance Authorization, whichever is higher. However, for Advance Authorisations for products with VA as per Appendix 4D, the VA shall be as per the VA stated in Appendix 4D or as stated in Advance Authorisation, whichever is higher. 3 [ 4.42. Export Obligation (EO) Period and its Extension (a) Period of EO fulfilment under an Advance Authorisation shall commence from date of issue of Authorisation, unless otherwise specified. The period of EO fulfilment is given in paragraph 4.22 of FTP . (b) Regional Authority may consider a request of Advance Authorisation holder for one extension of EO period upto six months from the date of expiry of EO period subject to payment of composition fee of 0.5% of the shortfall in EO. Authorisation holder will have to submit a self declaration to RA stating that unutilised imported/domestically procured inputs are available with the applicant. 6 [(c) Request for further extension of six months after first extension as in (b) above can be considered by Regional Authority, provided Authorisation holder has fulfilled minimum 50% export obligation in quantity as well as in value, on pro-rata basis. This will be subject to payment of composition fee @ 0.5% per month on unfulfilled FOB value of export obligation. No further extension shall be allowed by Regional Authority. This provision shall also be applicable to Advance Authorisations issued during FTP 2009-2014 . However, only two extensions of six months each as given in sub-para (b) and in this sub-para can be allowed subject to payment of composition fee and under no circumstance Regional Authority shall allow any extension beyond 12 months from date of expiry of EO period. At the time of filing application for second extension, authorisation holder will have to submit a certificate to RA from an independent Chartered Accountant/Chartered Engineer certifying that unutilised imported/domestically procured inputs are available with the applicant.] 41 [(d) Extension in export obligation period for Authorisations issued under Appendix-4J (issued under FTP 2015-20) shall be allowed for a period not more than the half of the stipulated export obligation period. In such cases, composition fee shall be levied @ 0.5% per month of unfulfilled FOB value, in case exports effected are more than 50% within initial Export Obligation period and @ 1% per month where less than 50% exports have been effected within initial export obligation period.] (e) Whenever a ban / restriction is imposed on export of any product, export obligation period in respect of Advance Authorisation already issued prior to imposition of ban, would stand automatically extended for a period equivalent to the duration of ban, without any composition fee.] 4.43 Provisional clearance of export consignment Customs may allow provisional clearance of export consignment as and when Authorisation holder produces documentary evidence of having applied for Export Obligation extension to concerned Regional Authority. 25 [4.43A Re-export of goods imported under Advance Authorisation Scheme Goods imported against Advance Authorisation Scheme, which are found defective or unfit for use, may be re-exported, as per Department of Revenue guidelines. The authorisation holder has to inform the RA who has issued the authorisation before re-export of such defective goods.] 4.44 Monitoring of Export Obligation (a) Regional Authority, with whom undertaking is executed by Advance Authorisation holder, shall maintain a proper record in a master register indicating starting and closing dates of obligation period and other particulars to monitor EO. In addition, this information may be generated from Computer System and maintained in a book form. (b) Within two months from the date of expiry of EO period, Authorisation holder shall file application online by linking details of shipping bills against the authorization. 26 [(c) In case of online filing of EODC application, Exporters shall link all exports on line on DGFT system by linking file number / authorisation number with the relevant shipping bill numbers / bill of exports / invoices in case of deemed exports/Tax invoices for supplies prescribed under GST rules on quarterly basis.] (d) In case of non EDI shipping bills and supplies under deemed export, exporter shall file relevant details manually on the website of the DGFT within two months from the date of expiry of EO period. Copies of shipping bills shall be submitted to concerned Regional Authority for verification within two months from date of expiry of export obligation period. (e) e-BRC shall be linked with these shipping bills within six months from the date of expiry of export obligation/realisation or as per the time period prescribed for realization of foreign exchange by RBI. Regional Authority shall not take action for non linking / submission of e-BRC before expiry of said period, provided other documents substantiating fulfilment of EO have been furnished by the exporter (f) In case Authorisation holder fails to complete EO or fails to submit relevant information / documents, Regional Authority shall enforce condition of Authorisation and Undertaking and also initiate penal action as per law including refusal of further authorization to the defaulting exporter. 4.45 Advance Authorisation for Annual Requirement (a) Exporters eligible for such Authorisations shall file online application in ANF 4A to Regional Authority concerned. All provisions applicable to Advance Authorisation given above would apply except the following: (i) Authorisation holder shall have flexibility to export any product falling under export product group using duty exempted material. (ii) Within eligible entitlement, an exporter may apply for one or more than one authorisation in a licensing year, subject to the condition that against one Port of registration, not more than five authorisations can be issued for same product group. One time enhancement / reduction of the authorisation shall be available. (iii) On completion of EO against one or more authorisations, all issued in same licensing year, entitlement of an exporter for that licensing year shall be deemed to be revived by an amount equivalent to EO completed against authorisation (s). (iv) In respect of export product for which SION does not exist, no Advance Authorisation for Annual Requirement shall be available. Further, where SION is fixed but input is listed in Appendix 4J, no exports shall be made under Advance Authorisation. (b) At the time of clearance of the import consignment against the authorisation, exporter shall mention technical characteristics, quality and specifications which shall be endorsed in the Bill of Entry / invoice, duly attested by the Customs authority, in respect of following inputs: Alloy steel including stainless steel, copper alloy, synthetic rubber, bearings, solvents, perfumes/ essential oils/aromatic chemicals, surfactants, relevant fabrics and marble. 12 [ 4.45A Special Advance Authorisation for export of Articles of Apparel and Clothing Accessories covered under Chapter 61 and 62 of ITC(HS) Classification of Export and Import (i) Policy relating to Special Advance Authorisation for export of Articles of Apparel and Clothing Accessories covered under Chapter 61 and 62 of ITC(HS) Classification of Export and Import is prescribed in Para 4.04A of Foreign Trade Policy . (ii) Provisions of Para 4.05 , 4.06 , 4.10, 4.11 , 4.12 (v) (vi) , 4.21 , 4.24 , 4.25 , 4.26 , 4.29 , 4.35 , 4.36 , 4.37 , 4.39 , 4.40 , 4.41 , 4.42 , 4.43 , 4.44 , 4.46 , 4.47(b) , 4.49, 4.50, 4.51 , 4.52 of Hand Book of Procedures shall be applicable to this scheme in so far as they are not inconsistent with this scheme.] 4.46 Fulfilment of Export Obligation Authorisation holder shall file online application in ANF 4F to concerned Regional Authority and upload prescribed documents in support of fulfilment of EO. 4.47 Redemption / No Bond Certificate (a) Bond Waiver: In case Authorisation holder exports first (before effecting imports) by using imported inputs / indigenously procured raw material, in that case the Authorisation holder can seek waiver of Bond condition by submitting evidence of export made and payment realised to that extent. If exports made are less than the export obligation stipulated in the Authorisation, request for waiver of bond condition, on pro-rata basis, can also be made. (i) For such a request, an applicant has to file online application attaching Shipping Bills and e-BRC. Scanned copy of other documents as prescribed in the ANF 4F shall also be uploaded. In case of deemed exports or export from non-EDI ports, the documents evidencing proof of export/supply shall be submitted at the counter of Regional Authority concerned giving reference of online application in physical form except e-BRC. (ii) 8 [ While allowing waiver of Bond for exports made first (before effecting imports) on pro-rata basis, Regional Authority may revalidate the Authorization in continuation for further six months for replenishment of inputs used in manufacture of export item's from the date of endorsement provided applicant has made a specific request in ANF 4D and paid requisite fee for revalidation. It will be further subject to condition that the applicant had not obtained revalidation earlier in terms of Para 4.41(a) of HBP 2015-20 . ] (iii) In case EO has been fulfilled, Regional Authority shall issue Bond Waiver Certificate (BWC) and forward a copy to the Customs authority at the port of registration of Authorisation enclosing details of shipping bill number(s), date(s), FOB value in Indian Rupees as per shipping bill(s) and description of export products in respect of shipment taken into account for allowing waiver of Bond condition. Such bond waiver shall not preclude the Customs Authority from taking bond in terms of the Customs notification. (iv) Copy of the Bond Waiver Certificate will also be endorsed by the Regional Authority to the Customs at the Port of Registration by post till system of transmitting these through EDI mode under message exchange is introduced between DGFT and CBEC. (b) Export Obligation Discharge Certificate (EODC): (i) In case Authorisation holder imports / procures inputs first and exports later, the Authorisation holder shall submit online application in ANF-4F as in (a) (i) above. In such cases, if EO has been fulfilled, the Regional Authority may issue EODC / Redemption Certificate to Authorisation holder and forward a copy to the Customs authority at the port of registration of Authorisation indicating the same details of proof of fulfilment of EO as stated in paragraph (a) above evidencing fulfilment of Export Obligation. (ii) Copy of EODC will also be endorsed by Regional Authority to Customs at the Port of Registration by post till system of transmitting these through EDI under message exchange between DGFT and CBEC is introduced. (c) Ordinarily, redemption of BG / LUT shall not preclude customs authority from conducting random checks and from taking action against Authorisation holder for any misrepresentation, mis-declaration and default detected subsequently as per the Customs Act. 27 [(d) Authenticity of such Certificate may be verified by referring to DGFT website (dgft.gov.in) or from the websites of Zonal offices of DGFT. Zonal offices of DGFT may publish details of such EODC certificates issued by them and by all RAs coming under their jurisdiction on their official websites every month.] (e) Regional Authority shall take action against Authorisation holder in case of non-submission of Appendix 4H 4-I duly filled in, as stipulated in paragraph 4.51 below or for any misrepresentation, mis-declaration and default detected subsequently in details declared and furnished in Appendix 4H 4-I. An endorsement to this effect shall be made by Regional Authority in the redemption certificate. 4.48 Transitional Arrangement for Authorisations issued upto 26.08.2009 (a) Advance Licences including Advance Licence for Annual Requirement issued up to 26.08.2009 shall be governed by provisions contained in Chapter-7 of HBP v1(RE-2001), Chapter 4 of HBP v1 (2002-2007) as Notified on 31.3.2002 and Chapter 4 of HBP v1 (2004-2009) as notified on 31.8.2004 respectively as amended from time to time, excepting provisions relating to clubbing and extension in E.O. period which shall be governed by provisions of paragraphs 4.38 and 4.42 (e) respectively and any other provision, as notified by DGFT. (b) Wherever Customs duty is to be paid on unutilised material, same shall be paid along with interest thereon as notified by DoR. 4.49 Regularisation of Bonafide Default Cases of bonafide default in fulfilment of EO may be regularised by Regional Authority as under: (a) If EO is fulfilled in terms of value, but there is a shortfall in terms of quantity, the Authorisation holder shall, for regularisation, pay: (i) To customs authorities, customs duty on unutilized value of imported / indigenously procured material along with interest as notified by DoR. Exporter will have the option to pay customs duty through valid duty credit scrips issued under FTP. However, interest / penalty shall be required to be paid in cash. (ii) An amount equivalent to 3% of the CIF value of unutilised imported material, if the item of import is restricted, into Head Account: 1453, Foreign Trade and Export Promotion and Minor Head102 . Provisions of this sub paragraph will not be applicable if unutilized material was freely importable on date of import/domestic procurement. (b) If the EO is fulfilled in quantity but there is shortfall in value, no penalty shall be imposed if Authorisation holder has achieved minimum VA prescribed. However, if VA falls below the minimum VA prescribed, Authorisation holder shall be required to deposit an amount equal to 1% of shortfall in FOB value in Indian Rupee through TR in authorised branch of Central Bank of India as above or through EFT mode or through credit card. (c) Value wise shortfall shall be calculated with reference to actual quantity of exports and FOB value of realisation with reference to pro-rata quantity of imports and CIF value. For example, if export performance is only 50% quantity wise but import has been for complete CIF value permitted, then VA would be calculated on a pro-rata basis, i.e. with reference to 50% of CIF value of imports. This would, accordingly, imply that where Authorisation holder is unable to export , no penalty on value wise shortfall shall be imposed. (d) If EO is not fulfilled both in terms of quantity and value, the Authorisation holder shall, for the regularisation, pay as per a), b) and c) above. (e) In case an exporter is unable to complete EO undertaken in full and he has not made any import under Authorisation, Authorisation holder will also have an option to get the Authorisation cancelled and apply for drawback after obtaining permission from Customs authorities for conversion of shipping bills to Drawback Shipping Bills. (f) Regional Authority shall compare relevant portion of Appendix 4H duly verified and certified by Chartered Accountant/Cost Accountants with that of norms allowed in Authorisation(s) and actual quantity imported against Authorisation(s) in the beginning of licensing year for all such Authorisations redeemed in preceding licensing year. In this verification process, in case it is found that Authorisation holder has consumed lesser quantity of inputs than imported, Authorisation holder shall be liable to pay customs duty on unutilized value of imported material, along with interest thereon as notified, or affect additional export within the EO period. 42 [(g) Regularization of Bonafide default in the cases where Authorisation was issued for import of drugs from unregistered sources with pre import condition: Import of drugs from unregistered sources issued with pre import condition shall be regularised in the following manner: (i) The Authorisation holder shall submit documents showing consumption of full imported quantity as per norms. In case, there is shortfall in fulfilment of EO and unutilised imported quantity remains with the authorisation holder, the Authorisation holder shall either submit a certificate from the jurisdictional Central Excise / Customs Authority certifying destruction of the unutilised imported quantity in their presence or proof of re-export of the same to the same supplier in-terms of para 4.43A of HBP 2015-2020. (ii) Exports made under free shipping bills/under same authorisation after expiry of EO period using unutilised quantity of drugs shall also be accepted in-lieu of submission of destruction certificate as stated in para (i) above, provided the exact description and technical characteristics of the drug exported matches with that of export item described in the Advance Authorisation. However, the Authorisation holder shall pay customs duty with applicable interest to the Customs Authority on unutilized quantity imported under Advance Authorisation. The exports made outside EO period shall only be considered for waiver of destruction certificate and not for waiver of liability of applicable duties and interest.] 4.50 Payment of Customs Duty and Interest in case of bonafide default in EO (a) Customs duty with interest as notified by DoR to be recovered from Authorisation holder on account of regularisation or enforcement of BG / LUT, shall be deposited by Authorisation holder in relevant Head of Account of Customs Revenue i.e., Major Head 0037 - Customs and minor head 001-Import Duties in prescribed T.R. Challan within 30 days of demand raised by Regional / Customs Authority and documentary evidence shall be produced to this effect to Regional Authority / Customs Authority immediately. Exporter can also make suo motu payment of customs duty and interest based on self/own calculation as per procedure laid down by DoR. (b) Mode of payment: Following modes of payment are available: (i) Payment in cash through TR Challan to Customs Authority. (ii) Payment of customs duty through debit of valid duty credit scrips issued under Chapter 3 (excluding SHIS, SFIS and AIIS scrips) in terms of FTP (2009-14) or Chapter 3 of this FTP or post-export EPCG duty remission scheme scrip, in respect of goods which are permitted under the respective reward/duty remission scrip. (c) Exporter shall obtain an endorsement from Customs authorities on the TR Challan 006 or on the back of the duty credit scrip(s) against which payment of customs duties have been accepted/debited and produce the same to RA along with duty calculation sheet at the time of regularization of their case. (d) Regional Authority shall verify the quantity of excess import before redeeming the case. RA may direct licence holders to pay balance amount of customs duty after informing the reasons of the difference in the liability worked out by Authorisation holder and the calculations by Regional Authority. In such case, the balance amount of duty and interest, if any shall be paid by Authorisation holder within 30 days, for regularization of the matter. (e) The interest shall be paid in cash through TR Challan 006 at the rate applicable on the date of payment of delayed duty amount to the Customs Authority. 28 [(f) On receipt of said documentary evidence from Authorisation holder, Regional Authority shall redeem the case, shall endorse details of duty paid on the EODC/Redemption Letter and inform details of recovery/ deposits made to the Customs Authority at the port of registration or the Commissioner of Customs having jurisdiction over the factory of the Authorisation holder, as the case may be.] (g) Payment of duty, interest and any dues for regularisation shall, however, be without prejudice to any other action that may be taken by Customs Authorities at any stage under Customs Act, 1962. 4.51 Maintenance of Proper Accounts Every Advance Authorisation holder shall maintain a true and proper account of consumption and utilisation of duty free imported / domestically procured goods against each authorisation as prescribed in Appendix 4H or 4I, as applicable. These records are required to be sent to the concerned Regional Authority at the beginning of each licensing year for all those authorisations, which have been redeemed in previous licencing year. However, these records in said format are required to be submitted for authorisations issued on or after 13-05-2005. Such records should be preserved for a period of at least three years from date of redemption. 4.52 Consideration of cases against lost EP copy of the Shipping Bills and / or Bank Realisation Certificate / e-BRC (a) In case where Original EP copy of Shipping Bill / original BRC / e-BRC has been lost, request for EODC, No BG / LUT condition under Advance Authorisation / DFIA scheme or endorsement of transferability under DFIA scheme can be considered subject to submission of following documents in lieu of those original documents: (i) A duplicate / Customs Certified / Self-attested copy of the shipping Bill in lieu of the original; Duplicate / Bank certified copy of BRC in lieu of original; (ii) An application fee equivalent to 1% of duty saved amount. However, no fee shall be charged when such document is lost by Government agencies and a documentary proof to this effect is submitted; (iii) Self declaration by exporter about loss of document and an undertaking to surrender it immediately to concerned Regional Authority, if found subsequently; (iv) An indemnity bond by exporter to the effect that he would indemnify Government for financial loss, if any, on account of duty free import entitlement availed / allowed against lost Shipping Bills / BRC. (b) Customs Authority, before allowing redemption of BG / LUT or clearance after endorsement of No BG / LUT condition or endorsement of transferability, shall verify the genuineness of such shipping bill (s) and ensure that no double benefit against such shipping bill has been availed. This specific condition shall be endorsed by Regional Authority concerned on the EODC. DUTY FREE IMPORT AUTHORISATION SCHEME (DFIA) 4.53 Policy Policy relating to the Duty Free Import Authorisation (DFIA) Scheme is prescribed in Chapter 4 of FTP. 29 [4.54 Application (a) Application in ANF 4G along with documents therein, shall be filed online to concerned Regional Authority. (b) Provisions of paragraphs 4.26, 4.27, 4.28, 4.48, 4.49(e) 4.49 (f) and 4.52 of this Handbook of Procedures shall also be applicable for DFIA Scheme. (c) After completion of exports and realization of proceeds, request for issuance of transferable Duty Free Import Authorisation may be made to concerned Regional Authority within a period of twelve months from the date of export or six months (or additional time allowed by RBI for realization) from the date of realization of export proceeds, whichever is later. (d) Applicant shall be allowed to file application beyond 24 months from the date of generation of file number as per paragraph 9.02 of Hand Book of Procedures. ] 4.55 Facility for Split DFIA Split Authorisations of DFIA subject to a minimum of CIF value of ₹ 10 lakh each and multiples thereof may also be issued, on request at the time of seeking transferability. A fee of ₹ 1000/- each shall be paid for each split authorization. Split-up DFIAs shall be permitted with the same port of registration as appearing on the original DFIA. 4.56 Re-export of goods imported under DFIA Scheme (i) Goods imported against transferable DFIA, which are found defective or unfit for use, may be re-exported, as per Department of Revenue guidelines. In such cases, if the goods were not put to use after import, a certificate shall be generated by concerned Commissioner of Customs to the extent of 95% of CIF value debited against DFIA containing amount and description of exported goods and the details of original DFIA. (ii) Based on the certificate, a fresh DFIA shall be issued by concerned Regional Authority. Fresh DFIA, so issued, shall have same port of registration and shall be valid for a period equivalent to balance period available on date of import of such defective/unfit goods. 4.57 Maintenance of proper accounts of import and its utilisation Original DFIA holder shall maintain a true and proper account of consumption and utilisation of duty free imported / domestically procured goods against each authorisation as prescribed in Appendix 4H. These records are required to be sent to concerned Regional Authority along with request for bond waiver / redemption / discharge of export obligation / transferability. Such records should be preserved for a period of at least three years from date of redemption. GEMS AND JEWELLERY SECTOR 4.58 General Provision Policy relating to Gem Replenishment Authorisation and scheme for gold/ silver/platinum jewellery is given in FTP. Application in respect of export promotion scheme for gems jewellery sector including those of Nominated Agency Certificate shall be made to concerned Regional Authority as per Appendix 4A. 4.59 Application for Replenishment Authorisation (a) Application for REP Authorisation shall be filed online in ANF 4H and upload the documents prescribed therein to concerned Regional Authority as per Appendix 4A. (b) Application shall be filed within six months following the month during which the export proceeds are realised. For export proceeds realised during a month, consolidated application for entire month shall be filed. (c) In case E.P Copy of Shipping Bill and Customs attested invoice is submitted to nominated agencies, exporter shall furnish a self certified photo copy of same along with a certificate from nominated agencies certifying carat / value of studdings in case of studded jewellery and excess value addition achieved in case of plain jewellery and articles. (d) In cases where payment is received in advance and exports take place subsequently, application for REP Authorisation shall be filed within six months following the month during which exports are made. (e) It is clarified that the month in which the export has been made in case of advance payment and the month in which export proceeds have been realised in part or full after making of exports, shall be excluded while calculating period of six months for filing of application for REP Authorisation. 4.60 Wastage Norms Maximum wastage or manufacturing loss on gold/silver/ platinum jewellery and articles thereof is as follows: Sl No Items of export Percentage of wastage by weight with reference to Gold/ Platinum / Silver content in export item Gold / platinum Silver a) Plain jewellery, articles, and ornaments like Mangalsutra containing gold and black beads /imitation stones, cubic zirconia diamonds, precious, semi-precious stones. 2.5 % 3.2 % b) Studded jewellery and articles thereof 5.0 % 5.0 % c) Mountings and findings manufactured (by non-mechanised process) indigenously 2.5 % 3.2 % d) Any jewellery/ articles manufactured by a fully mechanised process and unstudded. 0.9 % 0.9 % e) Mountings, whether imported or indigenously procured/ manufactured, used in studded jewellery 1.8 % 1.8 % f) Gold / silver / platinum medallions and coins (excluding coins of nature of legal tender) 0.2% 0.2% g) Findings and mountings manufactured by mechanized process 0.9% 0.9% 4.61 Value Addition Under scheme for export of jewellery, value addition shall be calculated as per paragraph 4.38 of FTP. Minimum value addition shall be: 13 [Sl No Items of export Minimum Value Addition a) Plain gold / Platinum/ Silver Jewellery and Articles and ornaments like Mangalsutra containing gold and black beads / imitation stones, except in studded form of jewellery. 3.5 % b) All types of Studded gold / platinum / silver Jewellery and articles thereof. 6.0% (for those studded with coloured Gem stones) and 7.0% (for those studded with diamonds). c) Any jewellery / articles manufactured by fully mechanized process 2.0 % d) Gold / silver / platinum medallions coins (excluding coins of nature of legal tender) 1.5 % e) Gold / silver / platinum findings / mountings manufactured by mechanized process 2.5 %] 4.62 Entitlement 30 [Entitlement of quantity of gold / silver / platinum against the export of articles made out of these metals shall be quantity of gold / silver / platinum in item of export plus admissible wastage / manufacturing loss. In the case of Studded Jewelry, the calculation of the quantum of gold/silver/platinum metal shall be done excluding the weight of studding.] 4.63 Loss of Gem and Jewellery in transit Consignments of gem and jewellery items exported out of country and lost in transit after exports, where foreign exchange against such exports has been realised or insurance claims settled, will also be eligible for REP Authorisation. 4.64 Gem Jewellery Replenishment Authorisations 31 [(a) Gem REP Authorisations shall be valid for import of precious stones, semi-precious and synthetic stones and pearls used in export of Gems and Jewellery products. In addition, Authorisation shall also be valid for import of empty jewellery boxes up to 5% of value of Authorisation within its overall CIF value. Gem REP Authorisations issued against export of studded gold / silver platinum jewellery articles, shall also be valid for import of cut and polished precious / semi- precious stones other than emerald up to 10% of CIF value of Authorisation within its overall CIF value. (b) Gem REP Authorisation will be as per the replenishment rate prescribed in Appendix -4F and the scale of replenishment on the remaining FOB value in the case of studded jewellery shall be as given in Appendix-4G. ] 4.65 Agency Commission Exporter availing scheme of gold / silver / platinum jewellery are allowed to pay agency commission subject to the guidelines laid down by RBI. VA shall be calculated after deducting agency commission. 4.66 Endorsement on shipping Bill and Invoice. During export of jewellery, shipping bill and invoice presented to customs authorities shall contain description of item, its purity, weight of gold/ silver/ platinum content, wastage claimed thereon, total weight of gold/ silver/ platinum content plus wastage claimed and its equivalent quantity in terms of 0.995/0.999 fineness for gold / silver and in terms of 0.9999 fineness for platinum and its value, FOB value of exports and value addition achieved. If purity of gold/silver/platinum used is same in respect of all or some of items made out from each of these metals for export, exporter may give total weight of gold/silver/platinum and other details of such similar items which are of same purity. In case of studded items, shipping bill shall also contain description, weight and value of precious / semi-precious stones / diamonds / pearls used in manufacture and weight / value of any other precious metal used for alloying gold/silver. 4.67 Conditions of Exports Exports shall be allowed by customs authorities provided endorsement made on shipping bill and invoice are correct and value addition achieved is not below minimum prescribed in FTP. 4.68 Proof of Exports 32 [(a) Exporter has to furnish the proof of exports, wherever required for export of gold / silver / platinum jewellery and articles thereof, by furnishing following documents: (i) E.P copy of the shipping bill; (ii) Customs attested Tax invoice for export/supplies as prescribed under GST rules; (iii) Bank certificate/e-BRC of realisation in Appendix 2U.] (b) In case of personal carriage of jewellery by foreign buyer, following documents should be submitted by the exporter/seller as proof of exports for claiming export entitlements: (i) Copy of shipping bill filed by Indian Seller; (ii) copy of Currency Declaration Form filed by Foreign Buyer with Customs at the time of his arrival; and (iii) Foreign Exchange Encashment Certificate from Bank. (c) In addition to this, Personal Carriage on Documents Against Acceptance (DA)/ Cash On Delivery (COD) basis is also allowed. Exporter will have to furnish following documents as proof of exports for claiming export entitlements: (i) Copy of Shipping Bill filed by Indian Seller; and (ii) Bank Certificate / e-BRC of Export and Realisation. (d) Instructions issued by Customs Department in this regard should be followed mutatis mutandis. 4.69 Conversion of Purity/Fineness For conversion of quantity of gold/ silver/platinum in terms of equivalent quantity in terms of fineness, following formula shall be used: (i) Where items of gold has been exported in terms of carats, quantity of gold shall be multiplied by number of carat of gold exported, divided by 24 and thereafter again divided by 0.995/0.999/0.900 to arrive at equivalent quantity of gold in terms of fineness of 0.995/0.999/0.900 respectively; and (ii) Wherever purity of item of export is expressed in terms of fineness, the quantity of gold/silver/platinum shall be multiplied by fineness of gold/silver/platinum exported and thereafter divided by 0.995 / 0.999 / 0.900 to arrive at equivalent quantity of gold/ silver/platinum in terms of 0.995 / 0.999 / 0.900 fineness respectively. 4.70 Release of Gold/Silver/ Platinum by Nominated Agencies Gold / silver / platinum shall be released to exporter of jewellery by nominated agencies/RBI authorised banks in multiples of 10 gms or in Ten Tola Bars in respect of gold. However, silver shall be released to exporters in multiples of 1 Kg only. Any balance of gold/ silver/ platinum shall be available to exporter along with his future entitlement. Gold/ silver shall be released by the nominated agencies in terms of 0.995 fineness or more and platinum in terms of 0.900 fineness or more. 4.71 Terms of payment Export of gold / silver / platinum jewellery and articles thereof shall be against irrevocable letter of credit, payment of cash on delivery basis, Documents Against Acceptance (DA) basis or advance payment in foreign exchange or replenishment of gold/silver/platinum content in exported jewellery / articles. 4.72 Port of Export Exports under schemes of gold /silver/platinum jewellery and articles thereof shall be allowed by airfreight and Foreign Post Office through the Customs House at Mumbai, Kolkata, Chennai, Delhi, Jaipur, Bangaluru, Kochi, Coimbatore, Ahmedabad, Dabolin Airport, Goa, Hyderabad and Surat (Surat Hira Bourse). Export by courier shall also be allowed through Custom Houses at Mumbai, Kolkata, Chennai, Kochi, Coimbatore, Delhi, Jaipur, Bangaluru, Ahmedabad and Hyderabad upto FOB value of ₹ 20 lakh per consignment. 4.73 Export by Post 33 [Policy for export of gems and jewellery parcel by post is in paragraph 4.48 of FTP . At the time of exports, exporter shall submit following documents: (i) Shipping bills or Tax invoice for export/supplies as prescribed under GST rules presented at foreign Post Office; (ii) Certificate from nominated agencies indicating price at which gold/ silver/platinum was booked or given on outright sale basis or loan basis; (iii) Three copies of Tax invoices for export/supplies as prescribed under GST rules.] 4.74 Export of Cut Polished Diamonds for Certification/ Grading Re- import Following are authorized laboratories for certification / grading of diamonds of 0.25 carat and above : (1) International Gemological Institute (IG) - Hong Kong. (2) American Gem Society Laboratories (AGS Laboratories),8917 West Sahara Avenue, Las Vegas, Nevada 89117; (3) Central Gem Laboratory, Miyagi Building, 5-15-14 Ueno Taito-Ku, Tokyo, Japan; (4) Diamond Trading Company, Maidenhead, UK; (5) European Gemological Laboratory (EGL), USA; (6) Gemological Institute of America (GIA), USA; (7) Hoge Road Voor Diamond, Antwerp, (HRD); (8) International Diamond Laboratories DMCC, Dubai. (9) The Robert Mouawad Campus, International Gemological Institute (IGI) USA; (10)World Diamond Centre of Diamonds High Council, Antwerp, Belgium. (11) GIA Hong Kong Laboratory Ltd., Hong Kong; (12) Gemological Research (Thailand) Co. Ltd., Bangkok; (13) GIA Education and Laboratory (Pvt) Ltd., Johannesburg; (14) GIA Education and Laboratory, Goborone (Botswana); (15) Forevermark NV, Antwerp, Belgium; (16) International Gemological Institute (IG) - Antwerp, Belgium; 4.75 Import of Diamonds for Certification/Grading re-export (a) This facility has been stated in Paragraph 4.42 of FTP. At the time of imports of diamonds, the bill of entry shall have the detailed description, including the dimensions / specifications of the diamonds. At the time of re-export after grading/certification, the Bill of Entry details should be endorsed in the shipping bill, so far as the dimensions and other specifications/ details of the diamonds are concerned, so as to establish a clear correlation between the imported diamonds and the diamonds being re-exported. In addition, a separate self certificate shall be attached by GIA (or any other approved agency) along with the shipping bill at the time of shipment, for matching of the imports to that of the exports as per the documents and GIA (or any other approved agency) certificate. (b) GIA (or any other agency approved in this regard) shall obtain GR waiver as per the procedure laid down by RBI, in all such cases. (c) Re-export of the imported diamonds shall be completed within a maximum time period of 3 months from the date of import(s). At the time of import, the agency shall give an undertaking to the customs to this effect. GIA (or any other agency approved in this regard) shall furnish a quarterly report to the customs authority at the port of import by 25th of the month, succeeding the end of the quarterly period, to ensure that the exports are effected within the stipulated time period. 4.76 Enlistment /Authorisation of Laboratories for Certification/ Grading of Diamonds of 0.25 carat and above Applications for enlistment of laboratories should be submitted to Gems and Jewellery Promotion Council (GJEPC) for scrutiny of the application for fulfilment of the norms prescribed. GJEPC will forward the application after verification of bona fides with their clear recommendation for in principle approval of DGFT. After in principle approval of DGFT is granted, GJEPC will conduct inspection of the facility to verify the availability of equipments, technical manpower as well as other infrastructure required for the Laboratory, to function as Authorised Laboratory for certification/ grading of diamonds of 0.25 carat and above. 7 [ Based on the Inspection Report and recommendations of the GJEPC, the concerned laboratory would be considered for inclusion in paragraph 4.42 or 4.43 of FTP as the case may be. ] 4.77 Export Against Supply By Foreign Buyer (a) Before clearance of each consignment of import supplied by foreign buyer, Nominated Agency / Status Holder having Nominated Agency Certificate shall execute a bond with Customs, undertaking to export within stipulated period in contract, gold/silver/platinum jewellery or articles equivalent to entire import quantity of gold/silver/platinum, mountings and findings etc excluding admissible wastage. 34 [(b) In case of direct supply of gold/silver/platinum, alloys, findings and mountings of gold/ silver/ platinum and plain semi-finished gold/silver/platinum jewellery to status holder/ exporter, Status Holder/exporter shall furnish a Bank Guarantee/LUT, as per Customs Rules and regulations to Customs equivalent to Basic Customs Duty leviable on imported gold/ silver/ platinum, alloys, findings and mountings of gold/ silver/ platinum and plain semi-finished gold/ silver/ platinum jewellery etc. Integrated Goods and Services tax and Compensation Cess leviable under Section 3(7) and 3(9) of Customs Tariff Act shall be payable separately on imports.] (c) BG /LUT, executed with Customs shall be valid for one year. In case of direct supply to Status Holder/exporter, exports shall be completed within 90 days. In case of non-fulfillment of EO / non- achievement of stipulated value addition, Customs Authority shall proceed to recover custom duty alongwith interest as notified by DoR which may include enforcement of BG/LUT. Besides, importer will be liable to penal action under Customs Act. 4.78 Export Procedure / Payment of Customs Duty (a) Nominated Agency / Status Holder having Nominated Agency Certificate / exporter shall be liable to pay customs duty leviable on that quantity which is proved to have not been exported. (b) Goods shall be cleared through Customs by Nominated Agency/ Status Holder having Nominated Agency Certificate / exporter. Even where export order is received by an Associate, goods shall be cleared through Customs by nominated agency only and not by Associate. Associate shall, in such cases, authorise Nominated Agency to act as its agent to file Bill of Entry and shipping bill. (c) At the time of export, shipping bill presented to Customs shall also contain the following: (i) Name and address of associate/ Status Holder having Nominated Agency Certificate /exporter; (ii) An endorsement by Nominated Agency / Status Holder having Nominated Agency Certificate that export is made against an order received by concerned associate, its date of registration with nominated agency. In case of exports by Status Holder having Nominated Agency Certificate /exporter, a self declaration shall be provided to this effect; (iii) Name of Customs House through which gold/ silver/ platinum/plain semi-finished gold/ silver/ platinum jewellery was imported and corresponding Bill of Entry No. and date and date of import. (d) Each shipping bill shall be valid for exports only through Customs House located at the place where office of Nominated Agency/ Status Holder having Nominated Agency Certificate / exporter concerned is situated. It shall be valid for shipment for a period of seven days including the date on which endorsement was made by nominated agency in case of exports through nominated agency. If exports cannot be made within this period, exporter shall file a fresh shipping bill. (e) At the time of export, exporter shall submit following documents: (i) Shipping bill with two extra copies where exports are made from a Customs House other than Customs House through which corresponding import of gold/ silver/ platinum/plain semi-finished gold/silver/ platinum jewellery was effected. In other cases, shipping bill with an extra copy; 35 [(ii) Three copies of Tax invoices for export/supplies as prescribed under GST rules;] (iii) Certificate from nominated agency indicating quantity and value of items supplied by foreign buyer. (f) Customs authorities shall return two copies of shipping bill and connected invoice duly attested. One copy shall be sent to person who presented documents and the other copy shall be sent by Customs to office of nominated agency/Status holder/ exporter. (g) In case of exports through nominated agency, exporter shall submit proof of exports to nominated agency within 15 days of exports, who shall, after verifying documents, release admissible quantity of the gold/ silver/ platinum etc. to exporter. 36 [(h) Exporter may also obtain, in advance, gold/ silver/ platinum etc. supplied by foreign buyer by furnishing a BG /LUT for an amount equal to international price of such items plus basic customs duty payable thereon. Integrated Goods and Services tax and Compensation Cess leviable under Section 3(7) and 3(9) of Customs Tariff Act shall be payable separately on imports. BG /LUT shall be redeemed only when the exporter has furnished proof of exports to nominated agency and accounted for the use of items supplied in advance in export product.] (i) For redemption of bond/ BG /LUT executed with Customs, Nominated Agency/ Status Holder having Nominated Agency Certificate /exporter shall furnish a statement indicating items, its quantity and value supplied by foreign buyer, corresponding Bill of Entry number and date, number of each of shipping bills against which corresponding exports was made. 4.79 Maintenance of Accounts Nominated Agency / Status Holder having Nominated Agency Certificate shall maintain complete account, consignment-wise, of the gold, silver, platinum, mountings, findings/ plain semi-finished gold/silver/ platinum jewellery etc. imported for execution of each export order, exports effected and quantity of gold, silver, platinum mountings, findings etc. released against such exports. Such accounts shall be maintained for a minimum period of three years from date of exports. 4.80 Export Through Exhibitions / Export Promotion Tours / Export of Branded Jewellery (A) Nominated Agencies shall produce to Customs Authorities letter in original or its certified copy, containing Government s approval for holding exhibition/export of branded jewellery. Any other person shall produce to the Asst. Commissioner, customs letter in original or its certified copy containing GJEPC s approval for holding exhibitions/ export promotion tour/export of branded jewellery. (B) In case of re-import, such items, on arrival, shall be verified along with export documents before clearance. (C) Exports under this scheme shall be subject to following conditions for following modes of export: (i) Export of Gems and Jewellery for holding/participating in overseas exhibition. (a) Items not sold abroad shall be re- imported within 60 days of close of exhibition. However in case exporter is participating in more than one exhibition within 45 days of close of first exhibition, then 60 days shall be counted from date of close of last exhibition. In case of exhibition in USA, the time period shall be 90 days instead of 60 days mentioned above. In case of personal carriage of gems and jewellery for holding /participating in overseas exhibitions, value of such gems and jewellery shall not exceed US $ 5 million. Gold/ silver/ platinum content on items sold in such exhibitions may be imported as replenishment. (b) Exporter shall take replenishment from nominated agency within 120 days from the close of the exhibition gold /silver / platinum for replenishment content against items sold abroad in exhibition. (D) Personal Carriage of gems jewellery or export through airfreight/post parcel route for Export Promotion Tours/photo shoots/fashion shows overseas. Personal carriage/export through airfreight/post parcel route of gold/silver/ platinum jewellery, cut and polished diamonds, precious, semi-precious stones, beads and articles as samples upto US$ 1 Million for export promotion tours/photo shoots/fashion shows and temporary display/ sale abroad is also permitted with approval of Gem Jewellery EPC subject to the condition that promoter would bring back jewellery / goods or repatriate sale proceeds within 45 days from date of departure through normal banking channel. In case of personal carriage for export promotion tours, exporter shall declare personal carriage of such samples to Customs while leaving country and obtain necessary endorsement on Export Certificate issued by Jewellery Appraiser of Customs. In such cases exporter shall book with nominated agency, within 120 days after export promotion tour or expiry of stipulated period of 45 days, whichever is earlier, gold/silver/ platinum for replenishment content against items sold abroad. (E) Export of branded jewellery. (i) Export of branded jewellery is also permitted with approval of Gem Jewellery EPC for display/sale in permitted shops set up abroad or in showroom of their distributors/ agents. Items not sold abroad within 365 days shall be re-imported. Exporter shall book with nominated agency within 120 days after the end of stipulated period of 365 days, gold/silver/platinum for replenishment content against items sold abroad. (ii) Following documents shall be submitted for claiming such replenishment: (a) Customs attested invoice; (b) Copy of the approval letter issued by Government/GJEPC; (c) Certificate from Nominated Agency/GJEPC as in Appendix 4-O. In case of exhibitions organised by nominated agencies, gold/silver/ platinum shall be imported as replenishment by nominated agencies within 60 days from close of exhibition. (F) Nominated Agencies shall maintain a complete account of exports made, goods sold abroad, goods re-imported, and metals purchased abroad and imported into India. Such account shall be maintained for a minimum period of three years from date of close of exhibition. 4.81 Export against supply by Nominated Agencies Exporter may obtain gold/silver/ platinum on following basis: (i) Replenishment basis after completion of exports; (ii) Outright purchase basis in advance; (iii) Loan basis. 4.82 Replenishment Basis (a) Exporter may apply to Nominated Agency / Status Holder having Nominated Agency Certificate for booking of precious metal gold/silver/platinum. Quantity of precious metal booked with nominated agency shall be equivalent to precious metal content in the export product and admissible wastage. (b) Applicant shall at the time of booking deposit an earnest money for a minimum amount of 20% of notional price of precious metal, which shall be adjusted at actual sale. (c) Exporter may also export jewellery on a notional rate based on certificate provided by Bank. Exporter must fix price within credit terms allowed to buyer and realise proceeds within the due date of the credit terms or 180 days, whichever is earlier. Exporter exporting on a notional basis under Replenishment Scheme must book the same quantity of gold with Nominated Agency on same rate that he may have booked with buyer. Nominated agencies shall purchase precious metal on behalf of exporter at the rate so fixed and thereafter issue a purchase certificate bearing a serial number to exporter indicating quantity of gold/ silver/platinum and CIF value, in dollars including the Rupee equivalent. Price shall be actual price at which gold/silver/platinum is purchased by nominated agencies plus permitted service charges levied by nominated agencies shall be included with the price of gold/ silver/ platinum for value addition. Duplicate and triplicate copies of exporter s application together with copies of purchase certificate for exporter shall be sent by nominated agencies to concerned Custom House as well as to the negotiating bank who will confirm realization at which gold has been purchased. Exporter exporting under notional rate will get replenishment only after proceeds are realised. (d) Exports shall be effected within a period of 120 days from date of booking and drawal of precious metal shall be completed within a period of 150 days from date of booking or within 30 days from date of export whichever is later. 4.83 Outright Purchase Basis in Advance (a) Exporter may obtain required quantity of precious metal in advance on outright purchase basis subject to furnishing of BG / LUT to nominated agencies for an amount as may be prescribed by nominated agency. On failure to effect exports within period prescribed, the nominated agencies shall enforce BG / LUT, as the case may be. (b) Exports shall be effected within a maximum period of 90 days from date of outright purchase of precious metal. 4.84 Loan Basis 37 [(a) Exporter may obtain required quantity of precious metal on loan basis subject to furnishing of BG / LUT, for customs duty to nominated agencies for an amount as may be prescribed by nominated agencies. Integrated Goods and Services tax and Compensation Cess leviable under Section 3(7) and 3(9) of Customs Tariff Act shall be payable separately on imports. On failure to effect exports within the period prescribed, the nominated agencies shall enforce the BG / LUT.] (b) Exporter has to pay interest as notified by |DoR on gold taken on loan basis at the rate as may be specified. (c) Export has to be completed within a maximum period of 90 days from date of release of gold on loan basis. No extension for fulfilment of EO shall be allowed. (d) (i) Exporter shall be permitted to export jewellery on the basis of a notional rate certificate to be issued by nominated agency / GJEPC. This rate will be based on prevailing Gold/US$ rate and the US$/INR rate in notional rate certificate. Certificate issued by nominated agency/GJEPC should not be older than 7 working days of date of shipment. (ii) VA will have to be achieved on rate as may be got fixed with buyer and Nominated Agency. (iii) Exporter shall have flexibility to fix the price and repay Gold Loan within 180 days from date of export. This price shall be communicated to nominated agencies who will issue a certificate showing final confirmation of the rate to the bank negotiating documents, to ensure export proceeds are realized at this rate. (e) Nominated agencies may accept payment in dollars towards cost of import of precious metal from EEFC account of exporter. 4 [ 4.85 Exports against Advance Authorisation (a) Procedure applicable to Advance Authorisations under Chapter 4 of Hand Book of Procedures shall generally apply to this scheme except norms for value addition, EO period and regularization of default. Value addition for Gems and Jewellery items shall be as per paragraph 4.61 of this Handbook of Procedures. (b) EO will be required to be fulfilled within 120 days from date of import of each consignment against Authorisation. However EO period shall be 180 days from date of import of findings, mountings made of gold, platinum and silver and export of jewellery. No further extension in EO period will be allowed. 38 [(c) Advance Authorisation holder may obtain gold /silver / platinum from nominated agencies in lieu of direct imports. In such a case, EO will be required to be fulfilled within 90 days from date of supply of Gold/Silver/Platinum by nominated agency and the nominated agency shall also make, both exchange control copy and customs purpose copy of Authorisation invalid for direct imports.]] 4.86 Regularistion of Bonafide Default Cases of bonafide default in fulfilment of EO by an exporter who has obtained precious metals from nominated agencies may be regularised provided exporter has paid customs duty alongwith interest thereon as notified by DoR. Exporter will have the option to pay customs duty through valid duty credit scrips issued under FTP. The interest / penalty shall be required to be paid in cash. In case of Advance Authorisation, the provisions as given in paragraph 4.49 above shall apply. This shall be without prejudice to any action that may be taken against exporter under FT(D R) Act, Order or Rules Issued hereunder as amended from time to time. 4.87 Replenishment Authorisation for Import of Consumables etc. Application for import of consumables etc., as given in paragraph 4.36 of FTP shall be filed online to the concerned Regional Authority in ANF 4H. 4.88 Personal Carriage of Gems Jewellery Export Parcels (a) Personal Carriage of gems jewellery parcels by Foreign Bound Passengers from all EOU/SEZ units and all firms in DTA through Airports in Delhi, Mumbai, Kolkata, Chennai, Kochi, Coimbatore, Bangalore, Hyderabad, Jaipur is permitted. Procedure for Personal Carriage of exports shall be as prescribed by Customs. Export proceeds shall, however, be realised through normal banking channel. (b) For claiming Replenishment in case of Personal Carriage of Exports by Foreign Bound passenger, documents shall be same as mentioned under paragraph 4.82(c) above. Authorised Courier Companies are also permitted to operate on the above lines. 4.89 Personal Carriage of Gems Jewellery Import Parcels Personal carriage of gems jewellery import parcels by an Indian importer/ Foreign National may be permitted into all EOUs/SEZ units and all firms in DTA through airports in Delhi, Mumbai, Kolkata, Chennai, Bangalore, Hyderabad Jaipur. Procedure will be same as for import of goods by air-freight except that parcels shall be brought to Customs by Importer / Foreign National for examination and release. Clearance of imports under this scheme shall be as per normal customs clearance procedure. 4.90 Duty free import of samples Duty free import of gems and jewellery samples upto ₹ 3 lakh or 0.25% of the average of last three years export turnover of gems and jewellery items, whichever is lower, shall be allowed in a financial year as per Customs notification. 4.91 Re-import of rejected jewellery An exporter of plain/ studded precious metal jewellery shall be allowed to re-import duty free jewellery rejected and returned by buyer up to 2% of FOB value of exports in preceding licencing year (based on CA certified copy of export of preceding year) with refund of any duty exemption/refund/replenishment benefit availed on inputs used as per customs rules and regulations. 4.92 Diamond Jewellery Dollar Accounts Policy for Diamond and Jewellery Dollar Accounts is given in paragraph 4.50 of FTP. Detailed procedure for its operation will be notified separately. 4.93 Export and import of Diamond, Gemstone Jewellery on consignment basis (a) Policy for export and import of diamond, gemstone and jewellery on consignment basis is given in paragraph 4.53 of FTP. (b) Detailed procedure in this regard shall be governed as per the relevant Customs Rules Regulations. Re-import of these items (either in complete or partial lot) exported on consignment basis shall be subject to condition that exporter follows prescribed provisions of relevant customs notification to establish that goods are the same which were exported. 4.94 Guidelines/ Monitoring for import of precious metal by the Nominated Agencies The guidelines on import of precious metal by the nominated agencies and monitoring are as under: (a) 39 [***] (b) Following guidelines for monitoring the import of precious metal and its distribution and / or own use by the Nominated Agencies will be followed, (other than the Banks nominated by RBI for this purpose): (i) Every Nominated Agency is required to maintain records of imports of precious metal (both quantity and value) and its distribution for the purpose of exports of value added product as well as for the purpose of domestic consumption as per the format given in Appendix 4-M of Hand Book of Procedures. Nominated Agencies will also have to follow the guidelines/ rules/procedures /directions as prescribed by RBI and DGFT. Failure to comply will render Nominated Agency Certificate liable to be cancelled in addition to action under FT (DR) Act 1992, as amended, after affording opportunity of personal hearing. (ii) Monitoring by Gems Jewellery Export Promotion Council: Monitoring in respect of Nominated Agencies MMTC Ltd, Handicraft and Handlooms Exports Corporation Ltd, The State Trading Corporation Ltd, PEC Ltd, STCL Ltd, MSTC Ltd, Diamond India Limited will be by Gems Jewellery Export Promotion Council (G J EPC). Nominated Agencies shall file half yearly return as per format given in Appendix 4-M of Hand Book of Procedures, to the Gems Jewellery Export Promotion Council (GJEPC), Mumbai within 15 days of every completed half year. In turn, G J EPC shall compile the half yearly return and the figures submitted by the Nominated Agency and check the performance of the Nominated Agency. Thereafter, GJEPC shall forward the compiled half yearly returns along with its observation on performance of Nominated Agency to DGFT headquarters within one month of every completed half year. In case of delay in filing or non-submission of half yearly return within 15 days of every completed half year, GJEPC shall seek comments of defaulting Nominated Agencies. GJEPC will also forward the particulars of defaulting Nominated Agency to DGFT headquarters for taking appropriate action against defaulting Nominated Agency. (iii) Monitoring by Regional Authorities of DGFT: Regional Authority which has issued Nominated Agency Certificate shall monitor performance of such Certificate holders based on the half yearly returns to be filed by such agencies to the concerned Regional Authority. The Nominated Agency shall file half yearly return to Regional Authority in the month of October (for the period April to September) / April (for the period October to March) as per the format given in Appendix 4-M of Hand Book of Procedures. Regional Authority shall consolidate and verify these returns. Regional Authority will also inform DGFT which agency has not filed the return and to also take appropriate action within 30 days for suspension / cancellation of the Nominated Agency Certificate. (c) DGFT headquarters can also review the performance of Nominated Agencies, whenever necessary. ------------------------- Notes:- 1. Substituted vide PUBLIC NOTICE NO 16/2015-2020 dt. 04th June, 2015 before it was read as, Paragraphdeep 2. Substituted vide PUBLIC NOTICE NO 16/2015-2020 dt. 04th June, 2015 before it was read as, 4.38 Facility of Clubbing of Authorisations (i) Clubbing of Authorisations issued on or before 27th August, 2009 shall be governed by paragraph 4.20 of HBP (2009-2014). (ii) Regional Authority which issued Authorisations, sought to be clubbed, or DGFT headquarters in other cases, shall consider requests for clubbing in ANF 4C of Hand Book of Procedures. All imports and exports of more than one Advance Authrisation can be considered provided imported inputs are common and properly accounted for as per norms. (iii) Clubbing of authorisations covered under Appendix 4 J and authorisations with EOP less than 18 months shall not be allowed. (iv) Facility of clubbing of Advance Authorisations shall be available only for redemption / regularisation of such authorisations and no further import or export shall be allowed. (v) Facility of clubbing shall not be available for Advance Authorisation for Annual Requirement. (vi) For clubbing, Authorisations are required to have been issued under similar Customs notifications. Such Authorisations may pertain to different financial years. (vii) Only such Advance Authorisations shall be clubbed which have been issued within 18 months from the date of issue of the earliest authorisation that is sought to be clubbed, whether such authorisations are valid or not. (viii) Upon clubbing wherever exports are accounted beyond the EO period of the earlier Authorisation, a composition fee of 0.5% of the shortfall in EO shall be levied. (ix) Minimum value addition as prescribed in FTP and Procedures for the export product will be required to be maintained. Thereafter, shortfall if any, shall be regularized in terms of this paragraph. (x) After clubbing, authorisations shall for all purposes, be deemed to be one Authorisation. The value addition would be calculated on the basis of total CIF and total FOB arrived at after clubbing the Authorisations. 3. Substituted vide PUBLIC NOTICE NO 16/2015-2020 dt. 04th June, 2015 before it was read as, 4.42 Export Obligation (EO) Period and its Extension (a) Fulfilment Period of EO under an Advance Authorisation shall commence from date of issue of Authorisation, unless otherwise specified. (b) Regional Authority may consider a request of Advance Authorisation holder for one extension of EO period upto six months from the date of expiry of EO period subject to payment of composition fee of 0.5% of the shortfall in EO. Authorisation holder will have to submit a self declaration to RA stating that unutilised imported/domestically procured inputs are available with the applicant. (c) Request for further extension of six months after first extension as in (b) above can be considered by Regional Authority, provided Authorisation holder has fulfilled minimum 50% export obligation in quantity as well as in value, on pro-rata basis. This will be subject to payment of composition fee @ 0.5% per month on unfulfilled FOB value of export obligation. No further extension shall be allowed by Regional Authority. This provision shall also be applicable to Advance Authorisations issued during FTP 2009-2014. At the time of filing application for second extension, authorisation holder will have to submit a certificate to RA from an independent Chartered Accountant/Chartered Engineer certifying that unutilised imported/domestically procured inputs are available with the applicant. (d) However, extension in EO period in respect of an Advance Authorization issued for import of an input listed under Appendix 4J shall not be permitted by RA. (e) Whenever a ban / restriction is imposed on export of any product, export obligation period in respect of Advance Authorisation already issued prior to imposition of ban, would stand automatically extended for a period equivalent to the duration of ban, without any composition fee. 4. Substituted vide PUBLIC NOTICE NO 16/2015-2020 dt. 04th June, 2015 before it was read as, 4.85 Exports against Advance Authorisation (a) Procedure applicable to Advance Authorisations under Chapter 4 of Hand Book of Procedures shall generally apply to this scheme except norms for value addition, EO period and regularization of default. Value addition for Gems and Jewellery items shall be as per paragraph 4.73 of this Handbook of Procedures. (b) EO will be required to be fulfilled within 120 days from date of import of each consignment against Authorisation. However EO period shall be 180 days from date of import of findings, mountings made of gold, platinum and silver and export of jewellery. No further extension in EO period will be allowed. Advance Authorisation holder may also import gold as replenishment after completion of exports. (c) Advance Authorisation holder may obtain gold /silver / platinum from nominated agencies in lieu of direct imports. In such a case, nominated agency shall make, both exchange control copy and customs purpose copy of Authorisation invalid for direct imports. 5. Corrected vide Public Notice No. 20 /2015-2020 dt. 9th June, 2015 w.e.f. 1st April, 2015 . Earlier substituted vide PUBLIC NOTICE NO 16/2015-2020 dt. 04th June, 2015 (b) Where Authorisations are issued with initial obligation period of 18 months and last date of shipment is within 30 months: In such cases, exports made upto 30 months from the date of issuance of earliest authorization only will be taken into consideration for clubbing. Accounting of exports shall be subject to payment of a composition fee @ 0.5% of FOB value of exports made after 18 months from the date of earliest authorisation but upto 24 months. For the exports effected after 24th month till 30th month from the date of earliest Authorisation, the composition fee will be @ 0.5% of FOB value of exports made. (c) Where Authorisation(s) with initial obligation period of 36 months is clubbed with authorization(s) with initial obligation period of 18 months. In such cases, exports made upto 30 months from the date of issuance of earliest authorization only will be taken into consideration for clubbing. Accounting of exports shall be subject to payment of a composition fee @ 0.5% of FOB value of exports made after 18 months from the date of earliest authorisation but upto 24 months. For the exports effected after 24th month till 30th month from the date of earliest Authorisation, the composition fee will be @ 0.5% of FOB value of exports made. 6. Corrected vide Public Notice No. 20 /2015-2020 dt. 9th June, 2015 w.e.f. 1st April, 2015 . Earlier substituted vide PUBLIC NOTICE NO 16/2015-2020 dt. 04th June, 2015 (c) Request for further extension of six months after first extension as in (b) above can be considered by Regional Authority, provided Authorisation holder has fulfilled minimum 50% export obligation in quantity as well as in value, on pro-rata basis. This will be subject to payment of composition fee @ 0.5% per month on unfulfilled FOB value of export obligation. No further extension shall be allowed by Regional Authority. This provision shall also be applicable to Advance Authorisations issued during FTP 2009-2014. However, only two extensions of six months each as given in sub-para (c) and in this sub-para can be allowed subject to payment of composition fee and under no circumstance Regional Authority shall allow any extension beyond 12 months from date of expiry of EO period. At the time of filing application for second extension, authorisation holder will have to submit a certificate to RA from an independent Chartered Accountant/Chartered Engineer certifying that unutilised imported/domestically procured inputs are available with the applicant. 7. Substituted vide Public Notice No.48/2015-20, Dated the 16th December, 2015 before it was read as, Based on the Inspection Report and recommendations of the GJEPC, the concerned laboratory would be considered for inclusion in paragraph 4.43 of FTP . 8. Substituted vide PUBLIC NOTICE NO 17/2015-2020 DATED THE 08 th JUNE, 2016 before it was read as, While allowing waiver of Bond, Regional Authority may revalidate the Authorisation in continuation for further six month from the date of endorsement provided applicant has made a specific request and paid requisite fee for revalidation. 9. Inserted vide PUBLIC NOTICE NO. 20/2015-2020, NEW DELHI, DATED THE 1 st JULY, 2016 10. Substituted vide PUBLIC NOTICE No. 24/2015-2020, DATED THE 04 th AUGUST, 2016 before it was read as, Facility of clubbing shall not be available for Advance Authorization for Annual Requirement. 11. Substituted vide PUBLIC NOTICE No. 27/2015-2020 DATED THE 31st AUGUST, 2016 , before it was read was, (i) Application for grant of Advance Authorisation / Advance Authorisation for Annual Requirement / Duty Free Import Authorisation (DFIA) shall be filed online (digitally signed) by IEC holder to the concerned jurisdictional Regional Authority as per Appendix 1A. Applicant could be either Registered office or Head office or a branch office or a manufacturing unit of the IEC holder. 12. Inserted vide PUBLIC NOTICE No. 27/2015-2020 DATED THE 31st AUGUST, 2016 13. Substituted vide PUBLIC NOTICE NO. 28/2015-2020 Dated the 02 September 2016 , before it was read as, Sl No Items of export Minimum Value Addition a) Plain gold jewellery, Articles, and ornaments like Mangalsutra containing gold and black beads / imitation stones, except in studded form of jewellery. 3.5 % b) All types of Studded gold 6.0% (for those studded with coloured Gem stones) and 7.0% (for those studded with diamonds). c) Any jewellery / articles manufactured by fully mechanised process 2.0 % d) Gold medallions coins (excluding coins of nature of legal tender) 1.5 % e) Gold / silver / platinum findings / mountings manufactured by mechanised process 2.5 % 14. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, 4.06 Fixation of Norms (i) In case where norms have not been notified, application in ANF 4B, along with prescribed documents, shall be uploaded online to concerned Norms Committee (NC) in DGFT headquarters for fixation of norm. Details of Norms Committees along with products groups dealt by each Norms Committee and respective email addresses for correspondence relating to norms fixation is as follows: Norms Committees (NC) in DGFT headquarters For fixation / revision / amendment of norms of Export Products under following ITC HS Chapters Email addresses for communication with respective Norms Committee NC-1 81 to 84, 86 to 93 nc1.dgft@nic.in NC-2 72 to 76, 78 to 80, 85 nc2.dgft@nic.in NC-3 29, 30 nc3.dgft@nic.in NC-4 27, 28, 31 to 38, 44 to 49, 68 to 71 nc4.dgft@nic.in NC-5 41 to 43, 50 to 67 nc5.dgft@nic.in NC-6 1 to 26, 94 to 98 nc6.dgft@nic.in NC-7 39, 40 nc7.dgft@nic.in (ii) An applicant shall indicate a valid email address for communication purpose and to ensure that this email address is active. (iii) The decisions of Norms Committees shall be available on the website of DGFT (http://dgft.gov.in) periodically and the applicants shall update themselves the status of norms fixation in respect of Authorisation obtained by them. (iv) Norms Committees shall also function as recommendatory authority for notification of SION and DGFT may notify such norms from time to time. (v) Exporters / EPC shall provide data to the Norms Committee for the fixation of SION for the export product within three months of such request made by Norms Committee. Norms Committee shall endeavour to notify such adhoc norm(s), if not notified already, within six months of the ratification of such adhoc norm (s). (vi) It is mandatory for industry / manufacturers/ EPCs to provide production and consumption data etc for the past three years, as may be required by DGFT for fixation of SION. Otherwise, applicants shall not be allowed to take benefit of Advance Authorisation scheme for taking repeat Advance Authorisations on self-declared basis. Norms Committee may also seek data from Central Excise (CBEC). 15. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, 4.10 Advance Authorisation for applicants with multiple units (i) Transfer of any duty free material imported or procured against Advance Authorisation from one unit of a company to another unit for manufacturing purpose shall be done with prior intimation to jurisdictional Excise Authority. Benefit of CENVAT shall not be claimed on such transferred input. (ii) Such transfers shall not be allowed to units located in areas covered by Central Excise Notification Numbers 32/1999, 33/1999, 39/2001, 56/2002, 57/2002, 49/2003, 50/2003, 56/2003, 71/03, 8/2004 and 20/2007 and any other notification issued by DoR from time to time. (The areas presently included are Himachal Pradesh, Uttarakhand, Jammu and Kashmir, Kutch in Gujarat, Assam, Tripura, Meghalaya, Mizoram, Manipur, Nagaland, Arunachal Pradesh and Sikkim). (iii) In case of non-excisable company / products, units should maintain a proper record. (iv) To avail this facility, names of such units should appear in IEC. Rules and Regulation of Central Excise for job work would be followed. (v) Imported duty free inputs can be taken from the port / domestic supplier s premises to the factory or the premises of the authorization / co-authorisation holder or the factory of the supporting manufacturer (whose name is endorsed in the authorization or allowed by the Central Excise authority). However, such duty free material imported or procured against advance authorization can also be taken from the port directly to the project site of the project authority, subject to furnishing a bond to the customs authority at the port of import and other documents / declaration and other provisions as per Department of Revenue guidelines. 16. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, (vii) Wherever an applicant has applied for input on net-to-net basis with accountability clause and such cases fall under paragraph 4 of General Note for Engineering Products (Product Code - C), the same need not be referred to Norms Committee for fixation of norms. However, exporters shall indicate clearly details of such inputs imported on net-to-net basis with accountability clause in the export/supply documents namely Shipping Bills, Bill of Exports, ARE-1, ARE-3 evidencing that these imported inputs have been exported. 17. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, 4.14 Application and On-line Inter-Ministerial Consultations for fixation of norms / adhoc norms (i) Application filed online by the applicant shall be forwarded electronically to the concerned Technical / Administrative Ministry / Department / or any other agency by the respective Norms Committee in the DGFT headquarters within three days. (ii) The concerned Technical / Administrative Ministry / Department / or any other agency as the case may be, may communicate its views / comments / recommendations within 45 days electronically/online. In case no comments are received within 90 days, Norms Committee may take a view based on the facts available on record. 18. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, In cases where entitlement of the applicant for grant of Advance Authorisation as per paragraph 4.12 was lower than the quantity of input applied by the applicant under Advance Authorisation and export obligation is completed pending fixation of norms by Norms Committee, entitlement for authorisation as given in paragraph 4.12 may be re-credited upon production of documentary evidence (copies of Shipping bill / bill of export / Central Excise certified copies of invoices) showing fulfilment of export obligation in respect of previous authorisations. However, bond waiver / redemption shall not be allowed pending fixation of norms in such cases. 19. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, Provisions contained in paragraph 4.49 of Hand Book of Procedures, 2015-20, except sub-paragraph (f), shall be applicable. Regional Authority shall compare the details of Appendix 4-I, duly verified and certified by the jurisdictional Excise Authority, with that of the inputs made/allowed in the authorisation, before allowing redemption or Bond-waiver against individual advance authorization issued for pharmaceutical product(s) manufactured through NI process. As a result of the verification process, in case, it is found that the authorisation holder has consumed lesser quantity of inputs than imported, authorisation holder shall be liable to pay customs duty on unutilized imported material, alongwith interest thereon as notified by DoR, or effect additional export within the EO period to account for the export of the material remaining un utilized. However, for the Customs duty component, the authorisation holder has also the option to furnish valid duty credit scrip issued under Chapter 3 of FTP 20. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, Every Advance Authoritsation holder shall maintain a true and proper account of consumption and utilization of duty free imported / domestically procured inputs against each authorisation as prescribed in Appendix 4-I. This record in Appendix 4-I format, duly verified and certified by the jurisdictional Excise Authority, shall be submitted to the concerned Regional Authority at the time of filing application for redemption / bond waiver. Regional Authority shall compare the details of Appendix 4-I, with that of the inputs allowed in the authorisation, before allowing redemption or bond waiver against individual authorization. Such records shall be preserved for a period of at least three years from the date of redemption. 21. Inserted vide Public Notice no. 26/2015-2020 dated 20-9-2017 22. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, 4.27 Exports in Anticipation of Authorisation (a) Exports / supplies made from the date of EDI generated file number for an Advance Authorisation, may be accepted towards discharge of EO. Shipping / Supply document(s) should be endorsed with File Number or Authorisation Number to establish co-relation of exports / supplies with Authorisation issued. 23. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, (c) If authorisation holder is registered with Central Excise, he has an option of getting names of jobber endorsed by Central Excise as per Central Excise Rules in lieu of Regional Authority s endorsement. In case manufacturer exporter holding authorisation is not registered / not required to be registered with Central Excise authority, job work may be allowed as per Central Excise Rules and regulations without insisting for endorsement of supporting manufacturer s name. However, authorisation holder shall be solely responsible for imported items and fulfilment of EO. 24. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, (b) In case BG / LUT has been redeemed, Advance Authorization holder can get duty free inputs processed from any manufacturer under Actual User condition as per job work regulations prescribed under Central Excise Rules. However, such restriction shall not be applicable in case of transferable DFIA holder. 25. Inserted vide Public Notice no. 26/2015-2020 dated 20-9-2017 26. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, (c) Exporters shall link all exports on line on DGFT system by linking file number / authorisation number with the relevant shipping bill numbers / bill of exports / invoices in case of deemed exports on quarterly basis. 27. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, (d) Authenticity of such Certificate shall be verified by referring to DGFT website (dgft.gov.in). DGFT will publish details of such certificate on its official web every month. 28. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, (f) On receipt of said documentary evidence from Authorisation holder, Regional Authority shall redeem the case and inform details of recovery/ deposits made to the Customs Authority at the port of registration or the Commissioner of Central Excise having jurisdiction over the factory of the Authorisation holder, as the case may be. 29. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, 4.54 Application (a) Application in ANF 4G along with documents therein, shall be filed online to concerned Regional Authority. (b) Provisions of paragraphs 4.26, 4.27, 4.28, 4.48, 4.49(e) 4.49 (f) and 4.53 of this Handbook of Procedures shall also be applicable for DFIA Scheme. 30. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, Entitlement of quantity of gold / silver / platinum against the export of articles made out of these metals shall be quantity of gold / silver / platinum in item of export plus admissible wastage / manufacturing loss. 31. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, (a) Gem REP Authorisations shall be valid for import of precious stones, semi-precious and synthetic stones and pearls. In addition, Authorisation shall also be valid for import of empty jewellery boxes up to 5% of value of Authorisation within its overall CIF value. Gem REP Authorisations issued against export of studded gold / silver / platinum jewellery articles, shall also be valid for import of cut and polished precious / semi- precious stones other than emerald up to 10% of CIF value of Authorisation within its overall CIF value. (b) Gem REP Authorisation will be as per scale given in Appendix-4G. 32. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, (a) Exporter has to furnish the proof of exports, wherever required for export of gold / silver / platinum jewellery and articles thereof, by furnishing following documents: (i) E.P copy of the shipping bill; (ii) Customs attested invoice; (iii) Bank certificate/e-BRC of realisation in Appendix 2U. 33. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, Policy for export of gems and jewellery parcel by post is in paragraph 4.48 of FTP. At the time of exports, exporter shall submit following documents: (i) Shipping bills or invoice presented at foreign Post Office; (ii) Certificate from nominated agencies indicating price at which gold/ silver/platinum was booked or given on outright sale basis or loan basis; (iii) Three copies of invoice. 34. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, (b) In case of direct supply of gold/silver/platinum, alloys, findings and mountings of gold/silver/platinum and plain semi-finished gold/silver/platinum jewellery to status holder/ exporter, Status Holder/exporter shall furnish a Bank Guarantee/LUT, as per Customs Rules and regulations to Customs equivalent to Customs Duty leviable on imported gold/ silver/ platinum, alloys, findings and mountings of gold/ silver/ platinum and plain semi-finished gold/ silver/ platinum jewellery etc. 35. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, (ii) Three copies of invoice; 36. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, (h) Exporter may also obtain, in advance, gold/ silver/ platinum etc. supplied by foreign buyer by furnishing a BG /LUT for an amount equal to international price of such items plus customs duty payable thereon. BG /LUT shall be redeemed only when the exporter has furnished proof of exports to nominated agency and accounted for the use of items supplied in advance in export product. 37. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, (a) Exporter may obtain required quantity of precious metal on loan basis subject to furnishing of BG / LUT, for customs duty to nominated agencies for an amount as may be prescribed by nominated agencies. On failure to effect exports within the period prescribed, the nominated agencies shall enforce the BG / LUT. 38. Substituted vide Public Notice no. 26/2015-2020 dated 20-9-2017 , before it was read as, (c) Advance Authorisation holder may obtain gold /silver / platinum from nominated agencies in lieu of direct imports. In such a case, nominated agency shall make, both exchange control copy and customs purpose copy of Authorisation invalid for direct imports. 39. Omitted vide PUBLIC NOTICE No. 31/2015-2020 dated 18-10-2017, before it was read as, (a) Regional Authority competent to issue/renew Nominated Agency Certificate are given below: S. No. Category Issuing /renewing Authority for Status Recognition Certificate Issuing / Renewing Authority for Nominated Agency Certificate 1. IEC holder having DTA unit as well as SEZ/EOU unit Regional Authority concerned as per Appendix 1A of Hand Book of Procedures. Regional Authority concerned as per Appendix 4A of Hand Book of Procedures. 2. IEC holder having SEZ/EOU unit only Development Commissioner concerned as per Appendix 1A of Hand Book of Procedures. No such Certificate for such applicants. 3. IEC holder having DTA unit only Regional Authority concerned as per Appendix 1A of Hand Book of Procedures. Regional Authority concerned as per Appendix 4A of Hand Book of Procedures. (i) Four Star Export House (status on the basis of exports made only of Gems Jewellery Sector items) and Five Star Export House may apply to the concerned Regional Authority online in ANF 4-I for issue of Nominated Agency Certificate. Applicant shall upload a self-attested copy of the valid Status Holder Certificate issued under FTP 2015-2020. (ii) On the date of application for renewal of Nominated Agency Certificate, the Status Certificate must be valid for next financial year also. Secondly, applicant should also be eligible to qualify to be recognized as Four Star Export House (based on the export of gems and jewellery sector items) / Five Star Export House on the date of application. In other words, Regional Authority shall reassess the eligibility of status holder based on export performance before issuing / renewing the Nominated Agency Certificate. (iii) Regional Authority after scrutiny of details given by the applicant, may grant Nominated Agency Certificate to the eligible applicant as per format given in Appendix 4N of Hand Book of Procedures. The Nominated Agency Certificate / Renewal of Nominated Agency Certificate shall be issued by the Head of Office. (iv) The existing Nominated Agency Certificate issued under FTP (2009-2014) shall be valid upto 31st March 2015. Thereafter, Nominated Agency Certificate issued under FTP 2015-2020 shall be valid for a period of one year from the date of issue. 40. Substituted vide PUBLIC NOTICE No. 32/2015-2020 dated 18-10-2017 , before it was read as , 2 [ 4.38. Facility of Clubbing of Authorisations (i) No clubbing of Authorisations issued on or before 31st March, 2009 shall be allowed. Cases already considered by PRC shall not be re-examined by RA under Para 4.38 of HBP for the purpose of clubbing. Applicant shall declare that he has not included any Advance Authorisation in respect of which request for clubbing has been considered earlier by PRC. (ii) Request for clubbing shall be made in ANF - 4C to the concerned RA who has issued the Authorisations. (iii) Clubbing of authorisations covered under Appendix 4 J and authorisations with EOP less than 18 months shall not be allowed. (iv) Facility of clubbing of Advance Authorisations shall be available only for redemption / regularisation of such authorisations and no further import or export shall be allowed. (v) 10 [ Facility of clubbing shall also be available for Advance Authorisations for Annual Requirement issued during Foreign Trade Policy period 2009-14 and 2015-20 , wherever exports and imports have taken place as per Standard Input output Norms (SION) notified (available in Handbook of Procedures). ] (vi) For clubbing, Authorisations are required to have been issued under similar Customs notifications. Such Authorisations may pertain to different financial years. (vii) (a) Clubbing of Authorisations issued before 05.06.2012: Only such Advance Authorisations shall be clubbed which have been issued within 36 months from the date of issue of the earliest Authorisation. (b) Clubbing of Authorisations issued on or after 05.06.2012: Only such Advance Authorisations shall be clubbed which have been issued within 18 months from the date of issue of earliest Authorisation. (c) Clubbing of Authorisation issued before 5.6.2012 with authorisation issued on or after 5.6.2012: Only such Advance Authorisations shall be clubbed which have been issued within 18 months from the date of issue of the earliest Authorisation. (viii) Accounting of exports made outside the export obligation period of earliest Authorisation shall be regularized, on payment of composition fee, in the following manner: (a) Where Authorisations were issued with initial obligation period of 36 months and last date of shipment is within 48 months: In such cases, exports made upto 48 months from the date of issuance of earliest authorization shall only be taken into consideration for clubbing. Accounting of exports made shall be subject to payment of a composition fee @ 0.5% of FOB value of exports made after 36 months from the date of issue of earliest authorisation but upto 42 months. For the exports effected after 42nd month till 48th month from the date of earliest Authorisation, the composition fee will be @ 0.5% per month of FOB value of exports made. 5 [ (b) Where Authorisations are issued with initial obligation period of 18 months and last date of shipment is within 30 months: In such cases, exports made upto 30 months from the date of issuance of earliest authorization only will be taken into consideration for clubbing. Accounting of exports shall be subject to payment of a composition fee @ 0.5% of FOB value of exports made after 18 months from the date of earliest authorisation but upto 24 months. For the exports effected after 24th month till 30th month from the date of earliest Authorisation, the composition fee will be @ 0.5% per month of FOB value of exports made. (c) Where Authorisation(s) with initial obligation period of 36 months is clubbed with authorization(s) with initial obligation period of 18 months. In such cases, exports made upto 30 months from the date of issuance of earliest authorization only will be taken into consideration for clubbing. Accounting of exports shall be subject to payment of a composition fee @ 0.5% of FOB value of exports made after 18 months from the date of earliest authorisation but upto 24 months. For the exports effected after 24th month till 30th month from the date of earliest Authorisation, the composition fee will be @ 0.5% per month of FOB value of exports made.] (ix) Minimum value addition as prescribed in FTP and Procedures for the export product will be required to be maintained. Upon clubbing, if shortfall in value or quantity is noticed, the same shall be regularized under the provisions of Para 4.49 of HBP . However, clubbing of authorisations issued with different minimum value addition criteria shall not be allowed by RA. (x) After clubbing, authorisations shall for all purposes, be deemed to be one Authorisation. The value addition would be calculated on the basis of total CIF and total FOB arrived at after clubbing the Authorisations.] 41. Substituted vide PUBLIC NOTICE No. 32/2015-2020 dated 18-10-2017 , before it was read as , (d) However, extension in EO period in respect of an Advance Authorization issued for import of an input listed under Appendix 4J of HBP 2015-2020 or Appendix 30A of Hand Book of Procedures 2009-14 shall not be permitted by RA. 42. Inserted vide PUBLIC NOTICE No. 32/2015-2020 dated 18-10-2017