9911796707
Advanced Search 
TMI BlogAmendments in the ITC (HS) Classifications of Export and Import Items, 2004-09X X X X Extracts X X X X X X X X Extracts X X X X ..... is regulated Export of Special Chemicals, Organisms, Materials, Equipment and Technologies (SCOMET) listed below shall be permitted only against an export licence issued in this behalf unless export is prohibited or is permitted without licence subject to fulfillment of conditions, if any, as indicated under/against any specific category or item. Exporters are advised to refer to the relevant guidelines relating to the export of SCOMET items in the Handbook of Procedures (Vol.I), as issued from time to time. Glossary: Expressions used in the SCOMET List have the following meanings: "Accuracy" usually measured in terms of inaccuracy, means the maximum deviation, positive or negative, of an indicated value from an accepted standard or true value. "Active flight control systems" are systems that function to prevent undesirable "aircraft" and missile motions or structural loads by autonomously processing outputs from multiple sensors and then providing necessary preventive commands to effect automatic control. "Aircraft": A fixed wing, swivel wing, rotary wing (helicopter), tilt rotor or tilt-wing airborne vehicle. "Angular position deviation" means the maximum difference betwe ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... either monocrystalline or polycrystalline, of any length; f. Aromatic polyamide pulp. "Hybrid computer" means equipment which can perform all of the following: a. Accept data; b. Process data, in both analogue and digital representations; and c. Provide output of data. "Image enhancement" means the processing of externally derived information-bearing images by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform). This does not include algorithms using only linear or rotational transformation of a single image, such as translation, feature extraction, registration or false coloration. "Information security" is all the means and functions ensuring the accessibility, confidentiality or integrity of information or communications, excluding the means and functions intended to safeguard against malfunctions. This includes cryptography, 'cryptanalysis', protection against compromising emanations and computer security. N.B.: 'Cryptanalysis': analysis of a cryptographic system or its inputs and outputs to derive confidential variables or sensitive data, in ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... d purposes or applications. Its properties may also make it suitable for purposes or applications other than those for which it was "modified." "Monofilament" or filament is the smallest increment of fibre, usually several micrometres in diameter. "Monolithic integrated circuit" means a combination of passive or active 'circuit elements' or both which: a. Are formed by means of diffusion processes, implantation processes or deposition processes in or on a single semiconducting piece of material, a so-called 'chip'; b. Can be considered as indivisibly associated; and c. Perform the function(s) of a circuit. N.B.: 'Circuit element' is a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc. "Neural computer" means a computational device designed or modified to mimic the behaviour of a neuron or a collection of neurons, i.e., a computational device which is distinguished by its hardware capability to modulate the weights and numbers of the interconnections of a multiplicity of computational components based on previous data. "Numerical control" means the automatic control of a process performed by ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... mately parallel. "Settling time" means the time required for the output to come within one-half bit of the final value when switching between any two levels of the converter. "Signal processing" means the processing of externally derived information-bearing signals by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform). "Software": A collection of one or more "programmes", or "micro-programmes", fixed in any tangible medium of expression. However, unless otherwise provided for against any item on the SCOMET List, the List does not control "software" which is either in the public domain or is generally available to the public by being : a. Sold from stock at retail selling points without restriction, by means of: 1. Over-the-counter transactions; 2. Mail order transactions; or 3. Telephone call transactions; and b. Designed for installation by the user without further substantial support by the supplier. "Space qualified": Products designed, manufactured and tested to meet the special electrical, mechanical or environmental requirements for use in ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... able of" qualifies the description of equipment, parts, components, materials, technology or "software" which are suitable for a particular purpose. There is no requirement that the equipment, parts, components, technology or "software" should have been configured, modified or specified for that particular purpose. (Contrast with "specially designed" - see above). "Use" includes operation; installation (including on site installation); maintenance; repair; overhaul; refurbishing. "Vaccine" is a medicinal product in a pharmaceutical formulation licensed by, or having marketing or clinical trial authorisation from, the regulatory authorities of either the country of manufacture or of use, which is intended to stimulate a protective immunological response in humans or animals in order to prevent disease in those to whom or to which it is administered. "Yarn" is a bundle of twisted 'strands'. N.B.: 'Strand' is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. Items on the SCOMET List are organised in the following categories. Category 0 Nuclear materials, nuclear-related other materials, equipment and technology 0A Prescribed Substances 0A1 So ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... cation for licences to export prescribed equipment or/an prescribed substances shall be made in writing to the Joint Secretary, Department of Atomic Energy, Anushakti Bhavan, CSM Marg, Mumbai 400 001. 0A Prescribed Substances Note: Any radioactive material in Category 0A shall additionally attract the provisions of Radiation Protection Rules, 2004 made under the Atomic Energy Act, 1962 and the provisions of Section-16 of the Atomic Energy Act, 1962. 0A1 Source Material 0A101 Uranium containing the mixture of isotopes occurring in nature. 0A102 Uranium depleted in the isotope 235. 0A103 Thorium. 0A104 Any of the foregoing in the form of metal, alloy, chemical compound, or concentrate or any substance. 0A105 Any other material containing one or more of the foregoing. Prescribed quantitative limits: as given below and in any period of 12 months: a. Uranium (containing the mixture of isotopes in nature) exceeding 100 kilograms. b. Depleted uranium (uranium depleted in the isotope 235 below that occurring in nature) exceeding 1000 kilograms. c. Thorium exceeding 1000 kilograms. 0A2 Special Fissionable Material 0A201 Plutonium-239. 0A202 Uranium-233. 0A203 Uran ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... g tritium in which the ratio of tritium to hydrogen atoms exceeds 1 part in 1000, except when utilized in such quantities and for such purposes as for organic labelled compounds, Gas Filled Light Sources and as Tritiated Water for radiotracer studies. 0A309 Hafnium: (CAS 7440-58-6) Hafnium metal, alloys containing more than 60% hafnium by weight, hafnium compounds containing more than 60% hafnium by weight, manufactures thereof, and waste or scrap of any of the foregoing. 0A310 Radium-226: Radium-226 (226Ra), radium-226 alloys, radium-226 compounds, mixtures containing radium-226, manufactures thereof, and products or devices containing any of the foregoing, except medical applicators and a product or device containing less than 0.37 GBq (10mCi) of Ra-226 in any form. 0A311 Boron (CAS 7740-42-8) Boron enriched in the Boron-10 (10B) isotope to greater than its natural isotopic abundance as follows: Elemental boron, compounds, mixtures containing boron, manufactures thereof, waste or scrap of any of the foregoing. 0A312 Helium-3 Helium-3 (3He), mixtures containing helium-3, and products or devices containing any of the foregoing. Note: A product or device containing les ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... perating pressures greater than or equal to 3 MPa 6. Infrared Absorption Analyzers capable of 'on-line' hydrogen/ deuterium ratio analysis 7. Catalytic Burners for conversion of enriched deuterium gas into heavy water 8. Complete heavy water upgrade systems or columns there for b. Plants for the conversion of uranium c. Plants for the conversion of plutonium d. Tritium facilities or plants, and equipment therefor e. Lithium isotope separation facilities or plants, and equipment therefor 0B003 Plants for reprocessing of irradiated nuclear fuel and equipment, components and systems specially designed, prepared or adapted or used or intended to be used in such plants, including but not limited to: a. Irradiated fuel element chopping machines designed for remote operation b. Dissolvers capable of withstanding hot and highly corrosive liquid for dissolution of irradiated nuclear fuel and which can be remotely loaded and maintained c. Solvent extractors and solvent extraction equipment resistant to the corrosive effect of nitric acid d. Chemical holding or storage vessels resistant to the corrosive effect of nitric acid e. Industrial equipment including assemblies and components as f ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... pins (or rods); c. automatic test and inspection stations specially designed or prepared for checking the integrity of completed fuel pins (or rods). Item 'c' typically includes equipment for: 1) x-ray examination of pin (or rod) end cap welds, 2) helium leak detection from pressurized pins (or rods), and 3) gamma-ray scanning of the pins (or rods) to check for correct loading of the fuel pellets inside. 0B007 Plants or systems for production, handling, storage and transportation of Radioisotopes in quantities exceeding 100 Curies (3.7 X 10 12 Becquerel). 0B008 Neutron generators including neutron chain reacting assemblies and fusion assemblies of all kinds for producing fissile materials 0C Technology Technology and software for the development, production or use of prescribed substances or prescribed equipment specified in 0A or 0B. Category 1 Toxic chemical agents and other chemicals 1A Export of the following chemicals is prohibited: (This corresponds to Schedule 1 to the Chemical Weapons Convention (CWC)) Note: Where reference is made below to groups of di-alkylated chemicals, followed by a list of alkyl groups in parentheses, all chemicals possible by all possib ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... f exports, notify the details to the National Authority, Chemical Weapons Convention, Cabinet Secretariat ; Ministry of External Affairs (D&ISA); Department of Chemicals and Petrochemicals and the Directorate General of Foreign Trade and submit to DGFT, a copy of Bill of Entry into the destination State Party within 30 days of delivery. Note: Where reference is made below to groups of dialkylated chemicals, followed by a list of alkyl groups in parentheses, all chemicals possible by all possible combinations and alkyl groups listed in parentheses are included unless explicitly exempted. 1. Amiton 0,0-Diethyl S-[2-(diethylamino) ethyl)] phosphorothiolate and corresponding alkylated or protonated salts 2. PFIB: 1,1,3,3,3,-Pentafluoro-2-(trifluoromethyl)1-propene 3. BZ: 3-Quinuclidinyl benzilate 4. Chemicals, except for those listed in Schedule 1, containing a phosphorus atom to which is bonded one methyl, ethyl or propyl (normal or iso) group but not further carbon atoms, e.g. Methylphosphonyl dichloride Dimethyl methylphosphonate Exemption:- Fonofos: O-Ethyl S-phenyl ethylphosphonothiolothionate 5. N, N-Dialkyl (ME, Et, n-Pr or i-Pr) phosphoramidic dihalides 6. Dialkyl (Me, E ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... methyl-diethyl ester 2B04 15715-41-0 29209054 19. Phosphonic acid, ethyl- 2B04 6779-09-5 29209055 20. Phosphonic acid, propyl- 2B04 4672-38-2 29209056 21. Phosphinic acid, methyl- 2B04 4206-94-4 29209057 22. Phosphonochloridic acid, methyl-, methyl ester 2B04 1066-52-0 29209058 23. Phosphonothioic dichloride, ethyl- 2B04 993-43-1 29209061 24. Phosphonic acid methyl- 2B04 993-13-5 29209062 25. Phosphonic acid, methyl-, dimethyl ester 2B04 756-79-6 29209063 26. Phosphonic dichloride, methyl- 2B04 676-97-1 29209064 27. Phosphonous dichloride, methyl- 2B04 676-83-5 29209065 28. Phosphonic acid, ethyl-, diethyl ester 2B04 78-38-6 29209066 29. Arsenous trichloride 2B07 7784-34-1 28121060 30. Benzeneacetic acid, alpha-hydroxy-alpha-phenyl 2B08 76-93-7 29181910 31. 1-Azabicyclo (2.2.2.) octan-3-ol 2B09 1619-34-7 29333930 32. Ethanamine, 2-Chloro-N, N-dimethyl- 2B10 107-99-3 29211914 33. Ethanol, 2-[bis(1-methylethyl ) amino ]- 2B11 96-80-0 29221920 34. Ethanethiol, 2-(diethylamino)- 2B12 100-38-9 29221930 35. Ethanol, 2, 2'-thiobis- 2B13 111-48-8 29309091 36. 2-Butanol, 3, 3-dimethyl- 2B14 464-07-3 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 2A009 Corynebacterium diphtheriae 2A010 Francisella tularensis 2A011 Klebsiella pneumoniae 2A012 Legionlla pneumophila 2A013 Leptospira interrogans - all serotypes reported in India 2A014 Mycobacterium bovis 2A015 Mycobacterium tuberculosis 2A016 Mycoplasma mycoides - var mycoides 2A017 Mycoplasma mycoides - var Capri 2A018 Neisseria meningitidis 2A019 Paseturella multicoda type B 2A020 Pseudomonas mallei 2A021 Pseudomonas pseudomallei 2A022 Salmonella paratyphi 2A023 Shigella dysenteriae 2A024 Staphylococcus aureus 2A025 Streptococcus pneumoniae 2A026 Vibrio cholerae elter 2A027 Vibrio Cholerae 0139 2A028 Yersinia pestis 2B Fungi, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following: 2B001 Blastomyces dermatitidis 2B002 Coccidiodes immitis 2B003 Histoplasma capulatum 2B004 Nocardia asteroides 2B005 Paracoccidioides braziliensis 2C Parasites, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material wh ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... se virus (Porcine entero virus type 1) 2D049 Variola virus 2D050 Venezuelan encephalitis virus 2D051 Vesicular stomatitis virus 2D052 Western encephalitis virus 2D053 Yellow fever virus, 17 D vaccine strain 2E Rickettsials, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following: 2E001 Coxiella burnetti 2E002 Rickettsiae rickettsii 2E003 Rickettsia quintana 2E004 Rickettsia prowazebi 2F Toxins 2F001 Abrins 2F002 Aflatoxins 2F003 Anatoxins 2F004 Botulinum toxin (s) (clostradium botulinum) 2F005 Bungarotoxins 2F006 Clostridium perfringens toxins 2F007 Corynebacterium diphtheriae toxins 2F008 Cyanginosins (Microcystins) (Microcystic aeuginosa) 2F009 Enterotoxin (Staphylococcus aureus) 2F010 Neurotoxin (Shigella dysenteriae) 2F011 Ricins 2F012 Shigatoxins 2F013 Saxitoxins 2F014 Trichothecene mycotoxins 2F015 Tetanus toxin (clostridium tetani) 2F016 Tetrodotoxin (Spheroides rufripes) 2F017 Verrucologen (M. verrucadia) 2G Plant pathogens 2G001 Bemisia tabaci 2G002 Coll ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... n by weight of Boron 3A111 Chlorine trifluoride (ClF3) 3A112 Magnesium containing less than 200 parts per million by weight of metallic impurities other than calcium and containing less than 10 parts per million by weight of boron 3A113 Tungsten, tungsten carbide, and alloys containing more than 90% tungsten by weight in forms with a hollow cylindrical symmetry (including cylinder segments) with an inside diameter between 100 and 300 mm and a mass greater than 20 kg. 3A114 a. Nickel powder of purity 99.0% or greater by weight and having a mean particle size of less than 10 µm; b. Porous nickel metal produced from the nickel powder specified above 3A115 Natural boron, boron carbide or metal borides having a boron purity of 85% or more. 3A116 Fibrous or filamentary materials, and prepregs, as follows: a. Carbon or aramid fibrous or filamentary materials having 'specific modulus' of 12.7 x 106 m or greater; or 'specific tensile strength' of 23.5 x 104 m or greater; b. Glass fibrous or filamentary materials having 'specific modulus' of 3.18 x 106 m or greater; and 'specific tensile strength' of 7.62 x 104 m or greater; c. Thermoset resin impregnated continuous yarns, ro ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... d metals or other high energy fuel components; Dinitrogen trioxide, Nitrogen dioxide / Dinitrogen tetroxide, Mixed Oxides of Nitrogen (MON), Dinitrogen pentoxide, Inhibited red fuming nitric acid (IRFNA) (CAS 8007-58-7), Ammonium perchlorate (CAS 7790-98-9), Ammonium Dinitramide (ADN) (CAS 140456-78-6), Hydrazinium Nitroformate (HNF), Compounds composed of fluorine and one more of other halogens, oxygen or nitrogen. 3A307 Bonding agents - Tris (1-2 (2-methyl)) aziridinyl phosphine oxide (MAPO)(CAS 57-39-6), Trimesoyl-1-(2-ethyl) aziridene (HX-868, BITA)(CAS 7722-73-8), Tepanol (HX-878)(CAS 68412-46-4), Tepan (HX-879) reaction product of tetraethlylenepentamine and acrylonitrile (CAS 68412-45-3), and Polyfunctional aziridine amides with isophthalic, trimesic, isocyanuric, or trimethyladipic backbone also having a 2-methyl or 2-ethyl aziridine group including 1,1'-Isophthaloyl-bis(2-methylaziridene (CAS 7652-64-4), (HX-752, HX-874, and HX-877); 3A308 Curing agents and reaction catalysts - Triphyenyl bismuth (TPB)(CAS 603-33-8); 3A309 Burning rate modifiers - a. Carboranes, decaboranes, pentaboranes and derivatives thereof; b. Ferrocene derivatives, as follows: 1. Catocene (CA ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... composite structures except textile machinery which has not been modified for rocket systems; 3B003 Equipment designed or modified for production of fibrous or filamentary materials as follows: converting polymeric substances; vapour deposition on heated filament substrates; wet spinning of refractory ceramics. 3B004 Equipment designed or modified for special fibre surface treatment or for producing prepregs and preforms, including rollers, tension stretchers, coating equipment, cutting equipment and clicker dies; 3B005 Chemical vapour deposition furnaces designed or modified for the densification of carbon-carbon composites. 3B006 Pyrolytic deposition and densification equipment including: a. Technology for producing pyrolytically derived materials formed on a mould, mandrel or other substrate from precursor gases. b. Specially designed nozzles for the above process. c. Equipment and process controls and specially designated software thereof, specially designed or modified for densification and pyrolysis of structural composite rocket nozzles and re-entry vehicle nose tips. 3B007 Production equipment usable for or specially designed or modified for production, handlin ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... nickel and 20% chromium by weight (e.g. 'Hastelloy', 'Illium'. 'Inconel', 'Incoloy') c. Fluoropolymers d. Glass or glass lined (including vitrified or enamelled coating) e. Graphite f. Tantalum or tantalum alloys g. Titanium or titanium alloys h. Zirconium or zirconium alloys i. Ceramics j. Ferrosilicon Note: 3D001 does not control the following items: a. Open vessels fabricated from glass sheets (such as aquariums, water tanks etc.); or cookware, table-ware, decorative glass or ceramic items (such as vases, art objects, etc.) b. Glass-ware (whether or not metal-jacketed) or glass-lined reaction vessels or reactors, whether or not equipped with agitators, provided that the total internal (geometric) volume of each vessel or reactor is greater than 20,000 litres (20 m3) or less than or equal to 100 litres (0.1 m3). Examples of the latter capacity glass or ceramic-ware include standard laboratory equipment such as test tubes, flasks, retorts etc. 3D002 Incinerators designed to destroy any chemicals specified in Category 1. 3D003 Combustors or pyrolysers capable of a heat-zone ('burner') temperature greater than 1,273 K (1000 Degree Centigrade), and in which any surfaces that co ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Machine tools for milling, having any of the following characteristics: 1. Positioning accuracies with all compensations available better (less) than 6 µm along any linear axis (overall positioning); or 2. Two or more contouring rotary axes; Note: Item 4A002b does not control milling machines having both of the following characteristics: 1. X-axis travel greater than 2 m; and 2. Overall positioning accuracy on the x-axis worse (more) than 30 µm. c. Machine tools for grinding, having any of the following characteristics: 1. Positioning accuracies with all compensations available better (less) than 4 µm along any linear axis (overall positioning); or 2. Two or more contouring rotary axes; Note: Item 4A002c does not control grinding machines as follows: 1. Cylindrical external, internal, and external-internal grinding machines having all the following characteristics: a. Limited to cylindrical grinding; b. A maximum work-piece outside diameter or length of 150 mm; c. Not more than two axes that can be coordinated simultaneously for contouring control; and d. No contouring c-axis; 2. Jig grinders with axes limited to x, y, c, and a, where c-axis is used to maintain the ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... s; and 2. A one-dimensional length measurement uncertainty equal to or better (less) than (1.25 + L/1000) µm tested with a probe of an accuracy of better (less) than 0.2 µm (L is the measured length in millimetres); b. 'Linear displacement' measuring instruments, as follows: 1. Non-contact type measuring systems with a resolution equal to or better (less) than 0.2 µm within a measuring range up to 0.2 mm; 2. Linear variable differential transformer (LVDT) systems having both of the following characteristics: a. Linearity equal to or better (less) than 0.1% within a measuring range up to 5 mm; and b. Drift equal to or better (less) than 0.1% per day at a standard ambient test room temperature ± 1 K; 3. Measuring systems having both of the following characteristics: a. Contain a laser; and b. Maintain for at least 12 hours, over a temperature range of ± 1 K around a standard temperature and a standard pressure: 1. A resolution over their full scale of 0.1 µm or better; and 2. With a measurement uncertainty equal to or better (less) than (0.2 + L/2000) µm (L is the measured length in millimetres); Note: Item 4A003b3 does not control measuring interferometer systems, withou ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... the working pressure are achieved and does not include fixtures. That dimension will be the smaller of either the inside diameter of the pressure chamber or the inside diameter of the insulated furnace chamber, depending on which of the two chambers is located inside the other. 4A006 Vibration test systems, equipment, and components as follows: a. Electrodynamic vibration test systems, having all of the following characteristics: 1. Employing feedback or closed loop control techniques and incorporating a digital control unit; 2. Capable of vibrating at 10 g RMS or more between 20 and 2000 Hz; and 3. Capable of imparting forces of 50 kN or greater measured 'bare table'; b. Digital control units, combined with software specially designed for vibration testing, with a real-time bandwidth greater than 5 kHz and being designed for a system specified in Item 4A006a; c. Vibration thrusters (shaker units), with or without associated amplifiers, capable of imparting a force of 50 kN or greater measured 'bare table', which are usable for the systems specified in Item 4A006a; d. Test piece support structures and electronic units designed to combine multiple shaker units into a comple ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... omposite structures in the form of tubes having both of the following characteristics: a. An inside diameter of between 75 and 400 mm; and b. Made with any of the materials specified in Item 3A116. 4A011 Frequency changers or generators having all of the following characteristics: a. Multiphase output capable of providing a power of 40 W or greater; b. Capable of operating in the frequency range between 600 and 2000 Hz; c. Total harmonic distortion better (less) than 10%; and d. Frequency control better (less) than 0.1%. Note: Frequency changers and generators especially designed or prepared for the gas centrifuge process are controlled under Prescribed Equipment (0B Category). Technical Note: Frequency changers in Item 4A011 are also known as converters or inverters. 4A012 Lasers, laser amplifiers and oscillators as follows: a. Copper vapour lasers having both of the following characteristics: 1. Operating at wavelengths between 500 and 600 nm; and 2. An average output power equal to or greater than 40 W; b. Argon ion lasers having both of the following characteristics: 1. Operating at wavelengths between 400 and 515 nm; and 2. An average output power greater tha ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... l size of 5 mm or greater; b. Having a bellows seal; and c. Wholly made of or lined with aluminium, aluminium alloy, nickel, or nickel alloy containing more than 60% nickel by weight. Technical Note: For valves with different inlet and outlet diameter, the nominal size parameter in Item 4A013a refers to the smallest diameter. 4A014 Superconducting solenoidal electromagnets having all of the following characteristics: a. Capable of creating magnetic fields greater than 2 T; b. A ratio of length to inner diameter greater than 2; c. Inner diameter greater than 300 mm; and d. Magnetic field uniform to better than 1% over the central 50% of the inner volume. Note: Item 4A014 does not control magnets specially designed for and exported as part of medical nuclear magnetic resonance (NMR) imaging systems. ('As part of' does not necessarily mean physical part in the same shipment. Separate shipments from different sources are allowed, provided the related export documents clearly specify the 'as part of" relationship.) 4A015 High-power direct current power supplies having both of the following characteristics: a. Capable of continuously producing, over a time period of 8 hours, ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... the rotor tube sections. c. Bellows-forming mandrels and dies for producing single -convolution bellows. Technical Note: The bellows referred to in Item 4A020c have all of the following characteristics: 1. Inside diameter between 75 and 400 mm; 2. Length equal to or greater than 12.7 mm; 3. Single convolution depth greater than 2 mm; and 4. Made of high-strength aluminium alloys, maraging steel, or high strength fibrous or filamentary materials. 4A021 Centrifugal multi-plane balancing machines, fixed or portable, horizontal or vertical, as follows: a. Centrifugal balancing machines designed for balancing flexible rotors having a length of 600 mm or more and having all of the following characteristics: 1. Swing or journal diameter greater than 75 mm; 2. Mass capability of from 0.9 to 23 kg; and 3. Capable of balancing speed of revolution greater than 5000 rpm; b. Centrifugal balancing machines designed for balancing hollow cylindrical rotor components and having all of the following characteristics: 1. Journal diameter greater than 75 mm; 2. Mass capability of from 0.9 to 23 kg; 3. Capable of balancing to a residual imbalance equal to or less than 0.010 kg x mm/kg pe ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... osphor bronze mesh chemically treated to improve wettability; and b. Designed to be used in vacuum distillation towers. 4A026 Pumps capable of circulating solutions of concentrated or dilute potassium amide catalyst in liquid ammonia (KNH2/NH3), having all of the following characteristics: a. Airtight (i.e., hermetically sealed); b. A capacity greater than 8.5 m3/h; and c. Either of the following characteristics: 1. For concentrated potassium amide solutions (1% or greater), an operating pressure of 1.5 to 60 MPa; or 2. For dilute potassium amide solutions (less than 1%), an operating pressure of 20 to 60 MPa. 4A027 Turbo-expanders or turbo-expander-compressor sets having both of the following characteristics: a. Designed for operation with an outlet temperature of 35 K (- 238 ºC) or less; and b. Designed for a throughput of hydrogen gas of 1000 kg/h or greater. 4A028 Water-hydrogen sulphide exchange tray columns and internal contactors, as follows: a. Water-hydrogen sulphide exchange tray columns, having all of the following characteristics: 1. Can operate at pressures of 2 MPa or greater; 2. Constructed of carbon steel having an austenitic ASTM (or equivalent sta ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... e figure of merit K is defined as: K=1.7 x 103 V2.65Q. V is the peak electron energy in million electron volts. If the accelerator beam pulse duration is less than or equal to 1 µs, then Q is the total accelerated charge in Coulombs. If the accelerator beam pulse duration is greater than 1 µs, then Q is the maximum accelerated charge in 1 µs. Q equals the integral of i with respect to t, over the lesser of 1 µs or the time duration of the beam pulse ( Q=?idt ) where i is beam current in amperes and t is the time in seconds. 2. Peak power = (peak potential in volts) x (peak beam current in amperes). 3. In machines based on microwave accelerating cavities, the time duration of the beam pulse is the lesser of 1 µs or the duration of the bunched beam packet resulting from one microwave modulator pulse. 4. In machines based on microwave accelerating cavities, the peak beam current is the average current in the time duration of a bunched beam packet. 4B003 Multistage light gas guns or other high-velocity gun systems (coil, electromagnetic, and electrothermal types, and other advanced systems) capable of accelerating projectiles to 2 km/s or greater. 4B004 Mechanical rotating mirro ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ; b. Arrangements using single or multiple detonators designed to nearly simultaneously initiate an explosive surface over an area greater than 5000 mm2 from a single firing signal with an initiation timing spread over the surface of less than 2.5 µs. Note: Item 4B008 does not control detonators using only primary explosives, such as lead azide. Technical Note: In Item 4B008 the detonators of concern all utilize a small electrical conductor (bridge, bridge wire, or foil) that explosively vaporizes when a fast, high-current electrical pulse is passed through it. In nonslapper types, the exploding conductor starts a chemical detonation in a contacting high-explosive material such as PETN (pentaerythritoltetranitrate). In slapper detonators, the explosive vaporization of the electrical conductor drives a flyer or slapper across a gap, and the impact of the slapper on an explosive starts a chemical detonation. The slapper in some designs is driven by magnetic force. The term exploding foil detonator may refer to either an EB or a slapper-type detonator. Also, the word initiator is sometimes used in place of the word detonator. 4B009 Firing sets and equivalent high-current pulse ge ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... gy for the development, production or use of items in 4A and 4B. 5 Aerospace systems, equipment including production and test equipment, related technology, and specially designed components and accessories therefor. 5A Rocket Systems (including ballistic missiles, space launch vehicles and sounding rockets) 5A1 Systems 5A101 Systems for missiles and rockets, including: a. complete rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets) b. complete rocket stages with engines c. solid or liquid fuel rocket engines and their control systems including liquid propellant apogee engines designed or modified for satellites Note: 5A101 does not control JATO units, propulsion units for flares, ejection seats, emergency escape equipment and rockets for display fireworks. 5A102 Subsystems and components usable in missiles and rockets including: a. rocket motor cases, interior lining, insulation and nozzles; b. rocket staging mechanisms, separation mechanisms and inter-stages; c. liquid and slurry propellant (including oxidizers), control systems, and components thereof, specially designed or modified for resistance to vibration; d. r ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... d coordinating and programming controls; 5A207 Tape-laying machines of which the motions for positioning and laying tape and sheets can be coordinated and programmed in two or more axes; 5A208 Isostatic presses having all of the characteristics of maximum working pressure equal to or greater than 69 MPa or greater; designed to achieve and maintain a controlled thermal environment of 600oC or greater; and possessing a chamber cavity with an inside diameter of 152 mm or greater. 5A209 Environmental chambers simulating vibration environments, with altitudes equal to or greater than 15 km, or temperature ranging between minus 50 and plus 125 degrees centigrade. 5A210 Environmental chambers simulating acoustic pressure level of 140 dB or greater or rated acoustic power output of 4 KW or greater, with altitudes equal to or greater than 15 km, or temperature ranging between minus 50 and plus 125 degrees centigrade. 5A211 Accelerators delivering electro-magnetic radiation produced by Bremsstrahlung from accelerated electrons. 5A212 Pulsed electron accelerators 5A213 Radial ball bearings having all tolerances specified in accordance with ISO 492 Tolerance Class 2 or better and ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ed airborne system and cruise missiles and their subsystems. 5A3 Technology 5A301 Technology related to the development, production, testing and use of items in 5A1 and 5A2. 5A302 Software for the development, production, and testing and use of items in 5A1 and 5A2. 5A303 Software which coordinates the function of more than one subsystem, specially designed or modified for use in the systems specified in 5A1 and 5A2. 5B Unmanned aerial vehicles including cruise missiles, target drones and reconnaissance drones and related equipment, and specially designed components therefor: a. Unmanned aerial vehicles including Remotely Piloted air Vehicles (RPVs) and autonomous programmable vehicles; b. Associated launchers and ground support equipment; c. Related equipment for command and control. d. Complete unmanned aerial vehicle systems (including cruise missile systems, target drones and reconnaissance drones) e. Light weight Turbojet and turbofan engines (including turbo compound engines). f. Ramjet / Scramjet / pulse jet/ combined cycle engines, including devices to regulate combustion, and specially designed components. g. Complete unmanned aerial vehicle systems having ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ation system incorporating an inertial measurement device (example: an attitude and heading reference system, inertial reference unit, or inertial navigation system); one or more external sensor used to update the position and/or velocity, either periodically or continuously throughout the flight (example: satellite navigation receiver, radar altimeter and/or Doppler radar); integration hardware and software 5C008 Production equipment and other test, calibration and alignment equipment, designed or modified to be used with equipment specified in 5C001 - 5C004 and 5C007. 5C009 Equipment used to characterize mirrors for laser gyros such as scatterometer, reflectometer and profilometer and for other inertial equipments such as Inertial measurement unit (IMU Module) tester, IMU Platform tester, IMU stable element handling fixture, Gyro tuning test station, Gyro dynamic balance station, Gyro run-in/motor test station, Gyro evacuation and filling station, Centrifuge fixture for gyro bearings, Accelerometer axis align station and Accelerometer test station. 5C010 Avionics equipment and embedded or specially designed software and components thereof, including but not limited to: a. ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... information 5C018 Position tables (equipment capable of precise rotary positioning in any axes) having two axes or more and a position accuracy equal to or better than 5 arc second 5C019 Centrifuges capable of imparting accelerations and having slip rings capable of transmitting electrical power and signal information 5C020 Design technology for integration of air vehicle fuselage, propulsion system and lifting control surfaces designed or modified for the unmanned aerial vehicle systems to optimize aerodynamic performance throughout the flight regime of an unmanned aerial vehicle system 5C021 Design technology for integration of the flight control, guidance, and propulsion data into a flight management system, designed or modified for the complete rocket systems, unmanned aerial vehicles and cruise missiles for optimization of the trajectory. 5C022 Technology for the development, production, or use of items in 5C. 5C023 Software for the development, production and use of items in 5C. 5C024 Software specially designed or modified for use in the systems specified in 5C. 5D Manned-aircraft, aero-engines, related equipment and components: Note: This category does no ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... modified for military use applies only to those military components and to military related equipment required for the modification to military use. 5E Microlight aircraft and powered 'hang-gliders' Category 6 [Reserved] Category 7: Electronics, computers, and information technology including information security 7A Electronics 7A001 High-power microwave devices including tubes, travelling wave tubes (TWT) and phase shifters, and continuous wave and pulsed high power microwave travelling wave tube amplifiers (TWTA) operating at frequencies higher than 31 GHz, and their power supplies. 7A002 Microwave monolithic integrated circuits (MMIC) operating at frequencies above 3 GHz and surface acoustic wave (SAW) devices operating at frequencies above 2.5 GHz. 7A003 Phased array antennas and their elements 7A004 Radiation-hardened microprocessors, field programmable gate arrays and solid state memory devices 7A005 Microprocessor microcircuits, microcomputer microcircuits, microcontroller microcircuits, storage integrated circuits manufactured from a compound semiconductor, analogue-to-digital converter, and digital-to-analogue converter, printed circuit boards or modul ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... rdance with the calculation scheme separately notified in this regard. 2. Individual digital computers each with a CTP rating of 75000 Mtops or less do not require an export license to any destination or end-user, unless supplied with (b) above. 3. Digital Computers' includes (1) hybrid computers incorporating 'digital computers' or specified in (a) above, systolic array computers, neural computers, optical computers, vector processors, digital signal processors, logical processors (2) digital electronic equipment designed for 'image enhancement' or signal processing other than when supplied as integral adjuncts to medical imaging (eg CAT-scanning) equipment. 7C002 Analogue, digital or hybrid computers, digital differential analysers, and specially designed software therefor, for use in, or for modelling, simulation, or design integration of rocket systems, unmanned aerial vehicles and cruise missiles. 7C003 Technology for the development, production or use of items in 7C002. 7D Information technology including information security 7D001 Data processing security equipment, data security equipment and transmission and signalling line security equipment, using ciphering pro ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
