Home Acts & Rules Customs Origin of Goods - Rules Customs Tariff (Determination of Origin of Goods Under the Preferential Trade Agreement Between the Governments of the Republic of India and Malaysia) Rules, 2011 This
Forgot password New User/ Regiser ⇒ Register to get Live Demo
Annexure-I - (See rule 5) - Customs Tariff (Determination of Origin of Goods Under the Preferential Trade Agreement Between the Governments of the Republic of India and Malaysia) Rules, 2011Extract Annexure-I (See rule 5) Part 1 1. For the purposes of this Annexure,- (a) Chapter means the first two digits of the tariff classification number under the Harmonised system; (b) heading means the first four digits of the tariff classification number under the Harmonised system; and, (c) Sub-heading means the first six digits of the tariff classification number under the Harmonised system. 2. This Annexure consists of,- (a) Column 1 Tariff heading (4-digit) (b) Column 2 Tariff sub-heading (6-digit) (c) Column 3 Product description (d) Column 4 Applicable Product-Specific Rules of Origin. 3. Where a tariff heading or sub-heading is subject to alternative Product Specific Rules, it shall be sufficient to comply with one of the rules. 4. Where the Product Specific Rule requires only regional value content, the final process of production must be performed within a Party. 5. A requirement of a change in tariff classification applies only to non-originating materials. 6. Where the change in tariff classification rule expressly excludes a change from other tariff classifications, the exclusion applies only to non-originating materials. 7. For the purposes of column 4 of this Annexure,- (a) CC means that all non-originating materials used in the production of the goods have undergone a change in tariff classification at the 2-digit level; (b) CTH means that all non-originating materials used in the production of the good have undergone a change in tariff classification at the 4-digit level; (c) CTSH means that all non-originating materials used in the production of the good have undergone a change in tariff classification at the 6-digit level; (d) RVC (XX) means that the goods must have a regional value content of not less than XX per cent as calculated under sub-rule (2) of rule 5 of these rules; and, (e) WO means that the goods must be wholly produced or obtained in accordance with rule 4 of these rules. 8. Chapter notes within this Annexure apply to all headings or sub-headings within the indicated chapter unless there exists a specific exclusion. Part 2 Product Specific Rules Tariff heading Tariff sub- heading Product description Product Specific Rule (1) (2) (3) (4) 15.07 Soya-bean oil and its fractions, whether or not refined, but not chemically modified. 1507 1507.90 Other RVC (40) or CTH 29.33 Heterocyclic compounds with nitrogen hetero-atom(s) only. 2933 2933.69 Compounds containing an unfused triazine ring (whether or not hydrogenated) in the structure: Other RVC (40) or CTH 38.12 Prepared rubber accelerators; compound plasticisers for rubber or plastics, not elsewhere specified or included; anti-oxidising preparations and other compound stabilisers for rubber or plastics. 3812 3812.30 Anti-oxidising preparations and other compound stabilisers for rubber or plastics RVC (40) or CTH 39.24 Tableware, kitchenware, other household articles and hygienic or toilet articles, of plastics. 3924 3924.90 - Other: RVC (40) or CTH 44.01 Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms; wood in chips or particles; sawdust and wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms. 4401 4401.10 Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms CTH 4401 4401.21 Wood in chips or particles, coniferous CTH 4401 4401.22 Wood in chips or particles, non-coniferous CTH 4401 4401.30 Sawdust and wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms CTH Tariff heading Tariff sub- heading Product description Product Specific Rule (1) (2) (3) (4) 44.02 Wood charcoal (including shell or nut charcoal), whether or not agglomerated. 4402 4402.10 - Of bamboo CTH 44.07 Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. 4407 4407.10 Coniferous: Damar Minyak, Podo, Sempilor and Other CTH 4407 4407.21 - - Mahogany ( Swietenia spp ): CTH 4407 4407.25 - - Dark Red Meranti, Light Red Meranti and Meranti Bakau: CTH 4407 4407.26 - - White Lauan, White Meranti, White Seraya, Yellow Meranti and Alan: CTH 4407 4407.29 - - Other: of Kapur, Ramin and Other CTH 4407 4407.91 - - Of Oak ( Quercus spp. ): CTH 4407 4407.92 - - Of beech ( Fagus spp. ): CTH 4407 4407.99 - - Other: Heavy hardwoods - Balau, Belian, Bitis etc CTH 44.08 Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. 4408 4408.10 - Coniferous: Face veneer sheets CTH 4408 4408.31 - - Dark Red Meranti, Light Red Meranti and Meranti Bakau: Face veneer sheets CTH 4408 4408.39 - - Other tropical wood: Face veneer sheets CTH 4408 4408.90 - Other wood: Face veneer sheets CTH 44.10 Particle board, oriented strand board (OSB) and similar board (for example, wafer board) of wood or other ligneous materials, whether or not agglomerated with resins or other organic binding substances. 4410 4410.11 - - Of wood: Particle board CTH 4410 4410.12 - - Of wood: Oriented strand board (OSB) CTH 4410 4410.90 - Other CTH 44.11 Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances. 4411 4411.12 - - Medium density fibreboard (MDF): Of a thickness not exceeding 5 mm CTH 4411 4411.13 - - Medium density fibreboard (MDF): Of a thickness exceeding 5 mm but not exceeding 9 mm CTH 4411 4411.14 - - Medium density fibreboard (MDF): Of a thickness exceeding 9 mm CTH 4411 4411.92 - - Other: Of a density exceeding 0.8 g/cm3 CTH 4411 4411.94 - - Other: Of a density not exceeding 0.5 g/cm3 CTH Tariff heading Tariff sub- heading Product description Product Specific Rule (1) (2) (3) (4) 44.12 Plywood, veneered panels and similar laminated wood. 4412 4412.10 - Of bamboo RVC (35) 4412 4412.31 - - Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: With at least one outer ply of tropical wood specified in sub-heading Note 1 to this Chapter RVC (40) or CTSH 4412 4412.32 - - Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: Other, with at least one outer ply of non-coniferous wood: RVC (40) or CTSH 4412 4412.39 - - Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: Other RVC (40) or CTSH 4412 4412.99 - - Other: With at least one outer ply of non-coniferous wood: RVC (35) 44.20 Wood marquetry and inlaid wood; caskets and cases for jewellery or cutlery, and similar articles, of wood; statuettes and other ornaments, of wood; wooden articles of furniture not falling in Chapter 94. 4420 4420.10 - Statuettes and other ornaments, of wood: Prayer beads, of wood CTH 4420 4420.90 - Other: Wood marquetry and inlaid wood: CTH 70.13 Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 70.10 or 70.18). 7013 7013.49 - - Glassware of a kind used for table (other than drinking glasses) or kitchen purposes other than of glass-ceramics: Other RVC (40) or CTH 73.05 Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel. 7305 7305.11 - - Line pipe of a kind used for oil or gas pipelines: Longitudinally submerged arc welded RVC (40) or CC except from 7208 to 7211 7413 7413.00 Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated. RVC (40) or CTH 74.18 Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper. 7418 7418.19 - - Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like: Other: RVC (40) or CTH Tariff heading Tariff sub- heading Product description Product Specific Rule (1) (2) (3) (4) 76.04 Aluminum bars, rods and profiles. 7604 7604.10 - Of aluminum, not alloyed RVC (40) or CTH 82.07 Interchangeable tools for hand tools, whether or not power- operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock drilling or earth boring tools. 8207 8207.20 - Dies for drawing or extruding metal RVC (40) or CTH
|