Effective rates of customs duty for goods of Chapters 1 to 99 - 20/99 - Customs -Tariff

Effective rates of customs duty for goods of Chapters 1 to 99 Notification No. 20/99-Cus. Dated 28-2-1999 In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), the Central Government, being satisfied that it is necessary in the public interest so to do, hereby exempts the goods of the description specified in column (3) of the Table below or column (3) of the said Table read with the relevant List appended hereto, as the case may be, and falling within the Chapter, heading No. or sub-heading No. of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) as are specified in the corresponding entry in column (2) of the said Table, when imported into India, - (a) from so much of the duty of customs leviable thereon under the said First Schedule as is in excess of the amount calculated at the rate specified in the corresponding entry in column (4) of the said Table; (b) from so much of the additional duty leviable thereon under sub-section (1) of section 3 of the said Customs Tariff Act, as is in excess of the rate specified in the corresponding entry in column (5) of the said Table, subject to any of the conditions, specified in the Annexure to this notification, the condition No. of which is mentioned in the corresponding entry in column (6) of the said Table: Provided that nothing contained in this notification shall apply to goods specified against serial Nos. 174, 175, 176, 177, 178 and 179 of the said Table on or after the 1st day of April, 2000. Explanation. - For the purposes of this notification, the rate specified in column (4) or column (5), is ad valorem rate, unless otherwise specified. TABLE S.No. Chapter or heading No. or sub-heading No. Description of goods Standard rate Additional duty rate Condition No. (1) (2) (3) (4) (5) (6) 1. 1 Cows, heifers, bulls, goats, sheep, pigs, angora rabbits, ducklings and pureline poultry stock 5% - - 2. 1 Grand parent poultry stock and Donkey stallions 25% - - 3. 5 Pancreas Nil - - 4. 5 or any other Chapter (1) The following goods, namely :- Frozen semen; Nil Nil - (2) Frozen semen equipment, namely :- (a) liquid nitrogen cont- ainers, flasks, refrigerators, vessels, jars or dewars, and their accessories; (b) Plastic insemination sheath and insemination guns; and (c) Weaton Ampoules and straws for freezing semen 5. 6, 7, 8 or 12 The following planting materials, namely, oil seeds, seeds of vegetables, flowers and ornamental plants, tubers and bulbs of flowers, cuttings or saplings of flower plants, seeds or plants of fruits and seeds of pulses 5% Nil 1 6. 0703.10 Onions Nil - - 7. 07.13 Pulses Nil - - 8. 8,12,13 or 15 to 21 All goods (excluding alcoholic preparations falling under sub-heading No. 2106.90) 25% - 2 9. 1301.90 Oleopine resin 15% - - 10. 15 Edible oils or any material from which edible oil can be extracted when imported upto and inclusive of the 31st day of March, 1999 Nil Nil 3 11. 15 Vegetable oils (other than coconut oil, RBD palm oil, RBD palm kernel oil and palm stearin) of edible grade, in loose or bulk form 15% - - 12. 17.01 Refined sugar including white crystal sugar, and raw sugar 25% - - 13. 1806.90 Food preparations, meant for infant use and put up for retail sale, of - (I) flour, meal, starch or malt extract containing cocoa in aproportion by weight 40% or more but less than 50%, calculated on a totally defatted basis; or (II) goods of heading Nos. 04.01 to 04.04 containing cocoa in a proportion by weight 5% or more but less than 10%, calculated on a totally defatted basis 15% - - 14. 2106.90 All goods (excluding com- pound alcoholic preparations of a kind used for the manufacture of beverages, of an alcoholic strength by volume exceeding 0.5 per cent. by volume, determined at a temperature of 20 degrees centigrade) 40% - - 15. 22 Wine, for use as sacramental wine 40% Nil 4 16. 2203.00 All goods - Nil - 17. 22.04, 22.05 or 22.06 All goods - Rs. 9 per litre - 18. 2207.10 or 22.08 All goods (other than Angostura bitters) - Nil - 19. 22.08 Angostura bitters 5% Nil - 20. 2309.90 Prawn feed 5% - - 21. 23, 28, 29, 30 or 38 Veterinary drugs and other goods specified in List 1 15% - - 22. 25 Spodumene ore, Strontium ore or Natural Boron ore 15% - - 23. 25.03 Crude or unrefined sulphur 5% - - 24. 2620.19 All goods (excluding zinc dross) 15% - - 25. 2620.30 All goods (excluding copper mill scale) 15% - - 26. 27.01 Coking coal of ash content below 12% 5% - - 27. 2707.99 Carbon black feedstock 25% - - 28. 27.10 Kerosene, that is to say, any hydrocarbon oil (excluding mineral colza oil and white spirit) which has a smoke point of 18 mm or more (determined) in the apparatus known as the smoke point lamp in the manner indicated in the Bureau of Indian Standards specification ISI : 1448(P.31)-1968 as in force for the time being) and is ordinarily used as an illuminant in oil burning lamps, and imported by the Indian Oil Corporation Limited for ultimate sale through the Public Distribution System Nil - - 29. 27 N-Paraffin imported for use in the maufacture of Linear Alkyl Benzene 20% - 5 30. 27.10 Naphtha 5% - - 31. 27.10 or 2714.90 All goods, for the manufacture of fertilisers Nil Nil 5 32. 2711.11 Liquified natural gas 5% - - 33. 2711.11 or 2714.90 All goods, for the purpose of power generation - Nil - 34. 28 or 29 Chemicals for use in the manufacture of Centchroman Nil - - 35. 2801.20 Iodine for manufacture of Potassium Iodate - 8% 5 36. 28 The following goods :- 15% - - (i) Radium and its salts; (ii) Radioactive isotopes of iodine, phosphorus, cobalt, caesium and all chemical compounds containing such radioactive isotopes; (iii) Molybdenum 99 and technetium 99 m isotopes; (iv) Enriched uranium or uranium oxide 37. 28 Phosphoric acid, for the manufacture of fertilisers 5% Nil - 38. 28 Anhydrous ammonia, for the manufacture of fertilisers - Nil - 39. 28 Zirconium oxide or uttrium oxide, for the manufacture of raw cubic zirconia 15% Nil - 40. 29 or 38 Gibberellic acid 5% Nil - 41. 29 DL-2 Aminobutanol, Diethyl Malonate, Triethyl orthoformate, Aceto Butyrolactone, Thymidine Nil - - 42. 29.22 L Lysine, L Lysine mono hydrochloride, DL Methionine or Methionine Hydroxy Analog 15% - - 43. 29 7-ACA 25% - - 44. 29 Methyl tertiary butyl ether 25% - - 45. 29 Codeine Phosphate or Narcotine, imported by Government Opium and Alkaloids Factories 25% - - 46. 29, 30, 35, 38 or 39 The following goods, for the manufacture of Enzyme Linked Immunoabsorbent Assay Kits (ELISA Kits), namely :- Nil - 5 (i) Plastic ELISA plates; (ii) Deactivated positive control sera against human and animal diseases; (iii) Enzyme horse raddish peroxidase; (iv) Enzyme Alkaline phosphatase; (v) Enzyme glucose oxidase; (vi) Animal anti-human immunoglobins; (vii) Protein A or Protein A Gold Conjugates; (viii) Polystyrene latex beads; (ix) Deactivated enzyme labelled human anti-HIV reagent. 47. Any Chapter Raw materials, intermediates and consumables supplied by the UNICEF for the manufacture of DTP vaccines Nil Nil 6 48. 28, 29 or 30 Formulations or bulk drugs, namely :- 15% - - Nilutamide, Sodium fusidate, Low molecular weight heparin or Erythropoietin. Explanation. - The expressions "bulk drug" and "formulation", shall have the meanings respectively assigned to them in the Drugs (Prices Control) Order, 1995, issued under section 3 of the Essential Commodities Act, 1955 (10 of 1955) 49. 28, 29 or 30 Formulations or bulk drugs, namely, Ceftaxidime, Cefotaxime, Cisplatin, Melaginina, Measles vaccine, Vinblastine, Vincristine, Alprostadil, Ceftriaxone, Carbencillin disodium, Estradiol patch, Lincomycin HCl, Prostaglandin F2 alpha (PGF2), Salazosulpha pyridine, Sulphadoxine or Sulphamethoxy pyrazine. Explanation. - The expressions "bulk drug" and "formulation" shall have the meanings respectively assigned to them in the Drugs (Prices Control) Order, 1995, issued under section 3 of the Essential Commodities Act, 1955 (10 of 1955) 25% - - 50. 28, 29, 30 or 38 The following goods, namely :- (A) Life saving drugs/ medicines including their salts and esters and diagnostic test kits specified in List 2 Nil Nil - (B) Bulk drugs used in the manufacture of life saving drugs or medicines at (A) above Nil - 5 (C) Other life saving drugs or medicines Nil Nil 7 51. 29 Maltol, if imported for use in the manufacture of Deferiprone Nil - 5 52. 30 Homeopathic medicines 25% - - 53. 30 Medicaments containing spirit - Nil - 54. 3102.10 Urea, for use as manure 5% - - 55. 31 Kyanite salts, in a form indicative of their use for manurial purpose 5% - - 56. 31 Muriate of potash, for use as manure or for the production of complex fertilisers 5% - - 57. 31 Ammonium phosphate or ammonium nitro-phosphate, for use as manure or for the production of complex fertilisers 5% - - 58. 3105.30 Diammonium phosphate, for use as manure or for the production of complex fertilisers 5% - - 59. 3104.30 Potassium sulphate, containing not more than 52% by weight of K 2 O 5% - - 60. 31 Composite fertilisers 5% - - 61. 31 Potassium Nitrate, in a form indicative of its use for manurial purpose 5% - - 62. 32, 39 or 71 The following goods, namely:- 5% Nil 8 (i) Silver powder suspension of Chapter 32 or 71 (ii) Silicone resin and silicone rubber of Chapter 39 63. 3301.90 Extracted oleoresins 25% - - 64. 3302.10 All goods (excluding compound alcoholic preparations of a kind used for the manufacture of beverages, of an alcoholic strength by volume exceeding 0.5 per cent. volume determined at 20 degrees centigrade) 40% - - 65. 34 Spin finish oil 35% - - 66. 35 Hydroxyethyl starch, imported for use in the manufacture of Plasma Volume Expanders 5% - 5 67. 35 Isolated soya protein 15% - - 68. 37 Film strips and film slides for educational purposes 15% Nil - 69. 37 Film of predominantly educational character 15% Nil 9 70. 37 Microfilms of printed books (including covers for printed books), periodicals (including newspapers), music manuscripts, maps, charts, plans, drawings and designs 15% Nil - 71. 37 Exposed and developed film sheets for printing or reproduction of printed books (including covers for printed books), periodicals (including newspapers), music manuscripts, maps, charts, plans, drawings and designs 15% Nil - 72. 37 Exposed cinematographic films 15% Nil 10 73. 37 Colour positive unexposed cinematographic film in jumbo rolls and colour negative unexposed cinematographic film in rolls of 400 feet and 1000 feet 15% - - 74. 3701.20 or 3702.20 Instant print film - 8% - 75. 37 or 85 Films and video cassettes 15% Nil 11 76. 38 Lumulus Amebocyte Lysate (LAL) Test Kit 15% - - 77. 38 Dipping Oil, Paclobutrazol (Cultar) 15% - - 78. 38 Bio-pesticides, based on - 5% - - (i) Bacillus thuringiensis var. kurstaki (ii) Bacillus thuringiensis var. israelensis (iii) Bacilus sphaericus 79. 39.20 Subbed polyester base imported for the manufacture of medical or industrial X-ray films and graphic art films Nil - - 80. 39 Dextran, imported for use in the manufacture of Plasma Volume Expanders 5% - 5 81. 39 Saddle tree 5% - - 82. 39 or 74 (i) Alatheon of Chapter 39 Nil Nil 12 (ii) Copper wire of Chapter 74 83. 39, 48 or any other Chapter Tags, labels, printed bags, stickers, belts, buttons or hangers, imported by bona fide exporters Nil Nil - 84. 39, 44, 45, 54, 56 or 95 The following goods for use in the manufacture of sports goods, namely :- 15% - - (1) Nylon gut falling under Chapter 39, 54 or 56; (2) Willow clefts, ashwood or beechwood falling under Chapter 44; (3) Cork bottoms falling under Chapter 45 or 95 85. 4012.10 Retreaded tyres, of a kind used on aircrafts 3% - - 86. 41 Wet blue chrome tanned leather, crust leather, finished leather of all kinds, including splits and sides of the aforesaid Nil - - 87. 47 Wood pulp (excluding rayon grade wood pulp) derived by mechanical or chemical means from any fibrous vegetable material Nil - 13 88. 47.07 All goods - Nil - 89. 48 Grape guard, namely, paper of a type generally used for the packing of grapes and which consists of two sheets of treated white paper pressed together with thin rectangular pouches containing sodium meta-bi-sulphite, with kraft paper pasted thereto or a single paper coated with sodium meta-bi-sulphite, and which is used for the purpose of preventing fungal decay and thus helps prolonged storage in fresh condition, imported for use in the packing of grapes Nil Nil - 90. 48.01 Newsprint, having an ash content by weight not exceeding 8% 5% Nil - 91. 48.01 Newsprint, having an ash content by weight exceeding 8% 5% Nil - 92. 4802.60 Paper (excluding chrome paper, marble paper, flint paper, poster paper, stereo paper and art paper) containing mechanical wood pulp amounting to not less than 70 per cent. by weight of the total fibre content 5% Nil - 93. 48.10 Light weight coated paper weighing upto 70g/m 2 , imported by actual users for printing of magazines 5% Nil - 94. 49 Commonwealth and International Reply Coupons and UNESCO Coupons Nil Nil - 95. 49 Greeting cards, diaries and calendars, and corresponding number of envelopes for such greeting cards, diaries and calendars, imported by the United Nations International Children's Emergency Fund (UNICEF) Nil - - 96. 49 Printed books (including covers for printed books) and printed manuals (including those in loose-leaf form with binder) Nil - - 97. 49 Cheque forms (including blank travellers cheques) 15% - - 98. 49.07 Printed Indian Bank Notes, imported by the Reserve Bank of India Nil Nil - 99. 49.11 Plans, drawings and designs Nil - - 100. 51.01 Raw wool, imported by a registered Apex Handloom Cooperative Society, a State Handloom Development Corporation, the Khadi and Village Industries Commission, a State Khadi and Village Industries Board or a registered Apex State Level Khadi Federation Nil - - 101. 51.01 Raw wool of average fibre diametre 32 microns and above 5% - - 102. 5303.10 Raw jute 5% - - 103. 5303.90 Jute waste (including yarn waste and garnetted stock) 25% - - 104. 53.01 Flax fibre 25% - - 105. 54.03 Acetate or cuprommonium filament yarn 25% - - 106. 55.02 Acetate tow 25% - - 107. 55.02 Viscose tow 25% - - 108. 55.04 or 55.07 Viscose staple fibre 25% - - 109. 63.02 Cotton terry towels 25% - - 110. 64 or any other Chapter The following goods for use in the leather industry, namely :- (1) Parts, consumables and other items specified in List 3(A) 25% - - (2) Other parts, consumables and items specified in List 3(B) 25% - 14 111. 70.15 Rough opthalmic blanks, for manufacture of optical lenses 25% - - 112. 70.19 Glass fibre sewing thread and glass fibre filter cloth, for manufacture of goods intended for pollution control purposes - 5% 15 113. 71 Industrial diamonds, whether natural or synthetic, in dust or in powder form 25% - - 114. 71 (i) Raw pearls, other than cultured pearls; (ii) Rubies, emeralds and sapphires, unset and imported uncut; (iii) Rough diamonds; (iv) Current coins of the Government of India Nil Nil - 115. 71 Raw cultured pearls (including admixtures of pearls containing raw real pearls and cultured pearls) Nil - - 116. 71 Rough semi-precious stones Nil - - 117. 71 Ash and residues containing precious metal or precious metal compounds, of a kind used principally for the recovery of precious metal 15% - - 118. 71 Foreign currency coins when imported into India by a Scheduled bank Nil Nil 16 119. 71.04 Rough synthetic stones 15% - - 120. 72 Hot rolled stainless steel coils 25% - - 121. 72 Tin mill black plate (TMBP) coils, for the manufacture of tin plates only 25% - - 122. 72.01 Pig iron 15% - - 123. 7202.60 Ferro-nickel 5% - - 124. 72.03 Hot briquetted iron (HBI) and sponge iron, imported by or on behalf of an electric arc furnace unit or induction furnace unit 25% - - 125. 72.04 Melting scrap of iron or steel (other than stainless steel or heat resisting steel), for use in electric arc furnace or induction furnace or melting in a hot blast cupola or for supply to a unit for use in electric arc furnace or induction furnace or melting in a hot blast cupola 5% - 17 126. 72.06 Ingots 25% - - 127. 72.07 Billets, blooms and slabs containing by weight less than 0.6 per cent. of carbon 25% - - 128. 7204.21 Scrap of stainless steel, for the purpose of melting 5% - - 129. 72.04 Re-rollable scrap 25% - 18 130. 72.08 or 72.11 Iron or non-alloy steel hot rolled coils (flat rolled products in coils, not further worked than hot rolled, of not less than 1.5 mm. thickness, of a width exceeding 500 mm. and of a weight not less than 500 kgs. per piece), containing carbon content less than 0.6 per cent. By weight 25% - - 131. 72.18 Stainless steel slabs 25% - - 132. Any Chapter Coin blanks imported by a Mint of the Government of India Nil Nil 74 133. 72 or any other Chapter The horological raw materials specified in List 4 15% - 19 134. 72 or 73 All goods required for the manufacture of machines falling under Chapter 84 or 85 25% - 5 and 40 135. 76.02 Aluminium waste and scrap 15% - - 136. Any Chapter Machinery and tools specified in List 5 5% - 20 137. 38 or 81 Graphite synthetic or cobalt alloy/metal powder, imported for the manufacture of diamond tools falling under Chapter 82 25% - 5 138. 84 or 90 Goods specified in List 6, designed for use in the leather industry 5% Nil - 139. 84 or any other Chapter The following goods, when imported upto and inclusive of the 31st day of March, 1999, namely :- 15% - 21 (A) Parts of fuel injection equipment (including those in semi-knocked down packs or completely knocked down packs) for manufacture of fuel injection equipment; (B) Parts of fuel injection equipment for providing warranty coverage or after sales service (free of cost or otherwise) to customers by the manufacturer of fuel injection equipment; (C) Parts (other than raw materials) for manufacture of goods specified at (A) above 140. Any Chapter The following goods, namely:- (i) Wind operated electricity generators upto 30 KW and wind operated battery chargers upto 30 KW 5% 10% 22 (ii) Parts of wind operated electricity generators, for manufacture of wind operated electricity generators, namely :- (a) Special bearings, (b) Gear box, (c) Yaw components, (d) Sensors, (e) Brake hydraulics, (f) Flexible coupling, (g) Brake calipers, (h) Wind turbine controllers, (i) Parts of the goods specified at (a) to (h) above. (iii) Blades for rotor of wind operated electricity generators, for manufacture of wind operated electricity generators (iv) Parts and raw materials for manufacture of blades for rotor of wind operated electricity generators 141. Any Chapter Goods required for, - (a) the substitution of ozone depleting substances (ODS); Nil Nil 23 (b) the setting up of new capacity with non-ODS technology. Explanation : "Goods", for the purpose of this exemption means goods which are designed exclusively for non-ODS technology. 142. Any Chapter (A) Machinery, instruments, apparatus and appliances, as well as parts (whether finished or not) or raw materials for the manufacture of aforesaid items and their parts, required for renovation or modernisation of a fertiliser plant; and 5% 10% 24 (B) Spare parts, other raw materials (including semi- finished material) or consumables stores, essential for maintenance of the fertiliser plant mentioned above. 143. 84 Spinnerettes made, inter alia of Gold, Platinum and Rhodium or any one or more of these metals, when imported in exchange of worn-out or damaged spinnerettes exported out of India 25% - 25 144. 84, 85 The following goods, for manufacture of ground power units and air jet starters, - 15% - - (1) Diesel engines of 2400 rpm; (2) Alternators of 400 Hz, 115/200 V and 2400 rpm; (3) Oil free dry screw compressor 145. 84 or any other Chapter The following goods, namely :- (1) Plant, machinery, equipment, special tools, tackles, spares (including insurance spares), consumables and security surveillance systems imported by or on behalf of the Reserve Bank of India or Bhartiya Reserve Bank Note Mudran Private Limited for the setting up of New Note Press projects at Salboni in West Bengal and at Mysore in Karnataka; Nil Nil - (2) Plant, machinery, equipment, spares (including insurance spares) and consumables imported by or on behalf of the Reserve Bank of India or the Bhartiya Reserve Bank Note Mudran Private Limited for expansion and modernisation of the Currency Note Press at Nashik in Maharashtra and the Bank Note Press at Dewas in Madhya Pradesh 146. 84 or any other Chapter The following goods, namely :- (a) Vacuum tube solar collectors, concentrating solar collectors, plastic collectors or stirling engines, for manufacture of solar energy equipments; 15% Nil - (b) Linear actuators for tracking systems, Fresnel lenses or sun sensors, for manufacture of concentrating solar collectors 15% Nil - 147. 84 or 85 Spares, supplied without board motors for maintenance of such outboard motors 5% - 26 148. 84 or 85 Parts of outboard motors specified in List 7 Nil - 27 149. 84.82 Ball or roller bearings, of bore diameter of more than 60 mm., and parts thereof 15% + Rs. 80 per kg. - - 150. 8483.20 Bearing housings, incorporating ball or roller bearings, of bore diameter of more than 60 mm. 15% + Rs. 80 per kg. - - 151. 85.06 Button cells 15% - - 152. Any Chapter Raw materials or parts, for manufacture of button cells 15% - 5 153. 73, 84 or 85 Agricultural silos 25% - - 154. 8543.89 Complete Ozone generators 15% - - 155. 8409.91 or 8409.99 All goods other than parts of goods falling under sub-heading Nos. 8407.31, 8407.32, 8407.33, 8407.34 or 8408.20 25% - - 156. 84.14 All goods, other than the following, namely :- 25% - - (1) compressors of a kind for use in air-conditioning and refrigeration equipment; (2) parts of compressors specified at (1) above 157. 8418.99 All goods, other than parts of goods falling under sub-heading Nos. 8418.10, 8418.21, 8418.22 or 8418.29 25% - - 158. 84.21 Catalytic convertors 5% - - 159. Any Chapter Parts of catalytic convertors, for manufacture of catalytic convertors 5% - 5 160. Any Chapter The following goods for manufacture of catalytic convertors and their parts, namely :- 5% - 5 (a) Palladium (b) Rhodium (c) Raw Substrate (ceramic) (d) Raw Substrate (metal) (e) Noble Metal Solution 161. 8422.90 All goods, other than parts of dish washing machines 25% - - 162. 84.48 All goods, other than parts of goods falling under sub-heading No. 8447.20 25% - - 163. 8450.90 Parts of goods falling under sub-heading No. 8450.20 35% - - 164. 8451.90 All goods, other than parts of dry-cleaning machines 25% - - 165. 8479.50, 8479.89 Machinery for production of commodities 25% - - 166. 84 or any other Chapter Goods specified in List 8 required for use in a Green House 25% - 28 167. 84 or any other Chapter Goods specified in List 26 required for setting up crude petroleum refinery 5% 10% - 168. 84 or any other Chapter The following goods, namely :- (1) Kits required for the conversion of motor-spirit or diesel driven vehicles into Compressed Natural Gas driven vehicles; 5% - 29 (2) Parts of the kits specified at (1) above 169. 84 or any other Chapter Goods specified in List 27 required for construction of roads Nil Nil 75 170. 84 or any other Chapter Navigational, communication, air-traffic control and landing equipment and spares for maintenance of such equipment when imported by Airports Authority of India 25% - 30 171. 84 or any other Chapter Goods specified in List 9 required for the initial setting up of a hotel or for substantial expansion of a hotel 25% - 31 172. 72, 73, 84, 85 or 90 All goods, for renovation or modernisation of a power generation plant (other than captive power generation plant) 5% 16% 32 173. 72, 73, 84, 85 or 90 All goods, imported by a manufacturer-supplier for the manufacture and supply of machinery and equipment to a power generation plant (other than captive power generation plant) 5% 16% 33 174. 85 Goods specified in List 28 required for basic telephone service 5% 16% 76 175. 84, 85 or 90 Goods specified in List 29 required for cellular mobile telephone service 5% 16% 77 176. 84, 85 or 90 Goods specified in List 30 required for radio paging service 5% 16% 78 177. 84 or 85 Goods specified in List 31 required for closed user's group 64 KBPS domestic data network via INSAT satellite system in extended C band 5% 16% 79 178. 84, 85 or 90 Goods specified in List 32 required for Public Mobile Radio Trunked Service (PMRTS) 5% 16% 52 179. 84, 85 or any other Chapter Parts of goods specified at S. No. 174 to 178 above 5% 16% 5 180. 84, 85 or 90 The machinery or equipment specified in List 10, required for textile industry 15% - - 181. Any Chapter Parts, for manufacture of the machinery/equipment specified in List 10 15% - 5 182. 84, 85 or any other Chapter Goods specified in List 11 required in connection with petroleum operations undertaken under petroleum exploration licenses granted by the Government of India to the Oil and Natural Gas Corporation or Oil India Limited on nomination basis Nil Nil 34 183. 84 or any other Chapter Parts and raw materials for manufacture of goods to be supplied in connection with the purposes of off-shore oil exploration or exploitation Nil Nil 35 184. 84 of any other Chapter Goods specified in List 11 required in connection with petroleum operations undertaken under specified contracts Nil Nil 36 185. 84 or any other Chapter Goods specified in List 11 required in connection with petroleum operations undertaken under specified contracts under the New Exploration Licensing Policy Nil Nil 80 186. 68, 82 or 84 Moulds (including chases for the manufacture of semi-conductor devices), tools (excluding tungsten carbide micro PCB drills) and dies, for the manufacture of electronic parts 25% - 38 187. 84, 85 or 90 The goods specified in List 12, for the manufacture of goods falling under heading Nos. 85.41 or 85.42 15% - - 188. 29, 30, 34, 37, 38, 39, 69, 84, 85, 90 or 94 (A) Medical equipment (excluding foley balloon catheter) specified in List 13; 15% - - (B) Parts, for the manufacture of goods at (A) above and spare parts, required for the maintenance of the goods at (A) above. 15% - 39 189. 8472.90 Automatic teller machines 25% - - 190. 8473.10 Printed circuit assemblies of word processing machines 25% - - 191. 8473.40 Printed circuit assemblies for automatic teller machines 25% - - 192. 8473.30 Microprocessors for automatic data processing machines of heading No. 84.71, other than mother boards 5% - - 193. 8473.30 Parts (excluding populated printed circuit boards) of the machines of heading No. 84.71 5% - - 194. 84 or 85 Braille printer or braille embosser or braille display, specially designed for computer systems Nil - - 195. 85, 90 or any other Chapter Television equipment, cameras and other equipment for taking films, imported by a foreign film unit or television team Nil Nil 41 196. 28, 38, 85 or 98 The following goods, namely :- 5 (A) Silicon in all forms, that is, polycrystalline silicon or ingots, for the manufacture of undiffused silicon wafers; 5% - (B) Undiffused silicon wafers, for the manufacture of solar cells or solar cell modules; 15% - (C) Solar cells and modules for the manufacture of photo-voltaic systems; 25% Nil (D) Photo-voltaic systems for the manufacture of photo-voltaic applications 35% Nil 197. 84, 85 or 90 The goods specified in List 14 15% - - 198. 28, 29, 84, 85 or 90 The goods specified in List 15, for the manufacture of laser and laser based instrumentation Nil Nil 42 199. 84, 85 or 90 The goods specified in List 16 5% - 43 200. 85 (1) Newspaper page transmission and reception facsimile system or equipment; (2) Telephoto transmission and reception system or equipment 5% - 44 201. 85 CNC Systems 25% - - 202. 85 or any other Chapter Parts of CNC systems 25% - 5 203. 85 or 90 Closed Circuit Television system used as Low Vision Aid for visually handicapped persons 15% - - 204. 85 or any other Chapter Photographic, filming, sound recording and radio equipment, raw films, video tapes and sound recording tapes of foreign origin, if imported into India after having been exported therefrom Nil Nil 45 205. 85 One set of pre-recorded cassettes accompanying books for learning languages and essential complement to such books Nil - - 206. 8522.90 All parts 35% - - 207. 85 Compact disc mechanism; tape deck mechanism 25% - - 208. 8517.80 Electrical apparatus for Line telephony or Line telegraphy, other than set top boxes which have a communication function 25% - - 209 8518.29 Loudspeakers, without housing, having a frequency range of 300 Hz to 3, 4 KHz with a diameter of not exceeding 50 mm for telecommunication use, other than cone type 25% - - 210. 8518.30 Line telephone handsets 25% - - 211. 8518.90 Printed circuit assemblies for - 20% - - (i) microphones having a frequency range of 300 Hz to 3, 4 KHz with a diameter not exceeding 10 mm. and a height not exceeding 3 mm. for telecommunication use; (ii) loud-speakers, without housing, having a frequency range of 300 Hz to 3, 4 KHz with a diameter not exceeding 50 mm. for telecommunication use; or (iii) line telephone handsets. 212. 8522.90 Printed circuit assemblies for telephone answering machines 25% - - 213. 8527.90 Portable receivers for calling, alerting or paging 25% - - 214. 8529.10 Aerials or antennae of a kind used with apparatus for radio-telephony and radio-telegraphy 20% - - 215. 8529.90 Parts of - 20% - - (i) transmission apparatus other than apparatus for radio-broadcasting or television transmission apparatus incorporating reception apparatus; (ii) digital still image video cameras; or (iii) portable receivers for calling, alerting or paging 216. 8531.80 Flat panel displays of a kind used in automatic data processing machines and telecommunication apparatus 25% - - 217. 8531.90 Parts of indicator panels incorporating Liquid Crystal Devices or Light Emitting Diodes 25% - - 218. 8536.50 Electronic AC switches consisting of optically coupled input and output circuits (insulated thyristor AC switches) 25% - - 219. 8536.50 Electronic switches including temperature protected electronic switches, consisting of a transistor and a logic chip (chip-on-chip technology) for a voltage not exceeding 1000 volts 25% - - 220. 8536.50 Electro-mechanical snap-action switches for a current not exceeding 11 amperes, switches of contact rating less than 5 amperes at voltage not exceeding 250 volts 25% - - 221. 8536.69 Plugs and sockets for co-axial cables and printed circuits 25% - - 222. 8536.90 Connection and contact elements for wires and cables 25% - - 223. 8536.90 Wafer probers 15% - - 224. 8538.90 Printed circuit assemblies for the following goods of Heading No. 85.36, namely :- 25% - - (1) electronic AC switches consisting of optically couple input and output circuits (insulated thyristor AC switches); (2) electronic switches, including temperature protected electronic switches, consisting of a transistor and a logic chip (chip-on-chip technology) for a voltage not exceeding 1000 volts; (3) electro-mechanical snap-action switches for a current not exceeding 11 amperes, switches of contact rating less than 5 amperes at voltage not exceeding 250 volts; (4) plugs and sockets for co-axial cables and printed circuits; (5) connection and contact elements for wires and cables; (6) wafer probers 225. 8543.89 Electrical machines with translation or dictionary functions 25% - - 226. 8543.90 Printed circuit assemblies for - (i) proximity cards and tags; (ii) electrical machines with translation or dictionary functions. 25% - - 227. or 8544.49 8544.41 Electric conductors, for a voltage not exceeding 80 V, of a kind used for telecommunications 25% - - 228. 8544.51 Electric conductors, for a voltage exceeding 80 V, but not exceeding 1000 V, fitted with connectors, of a kind used for telecommunications 25% - - 229. 85.24 CD-ROMs containing books of an educational nature, journals, periodicals (magazines) or newspapers Nil Nil - 230. 8525.40 Digital still image video cameras 25% - - 231. 49 or 85.24 The following goods, namely :- (i) Information Technology software, and Nil - - (ii) Document of title conveying the right to use Information Technology software. Explanation. -"Information Technology software" means any representation of instructions, data, sound or image including source code and object code, recorded in a machine readable form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data processing machine. 232. 85 Compact Disc-Read Only Memory (CD-ROM) 5% - - 233. 85 Floppy diskette 20% - - 234. 8540.11 All goods other than colour television picture tubes 25% - - 235. 85 or any other Chapter The wireless apparatus, accessories and parts specified in List 17, imported by a licensed amateur radio operator 5% - 46 236. 85 or any other Chapter Parts, sub-assemblies, SKD kits, CKD kits of Approach Surveillance Radar (ASR) and Mode-S Monopulse Secondary Surveillance Radar (MSSR) and spares for maintenance of such equipment, required for the modernisation of airport facilities 25% - 47 237. 85 or any other Chapter The following goods, namely :- (1) Mono or Bipolar Membrane Electrolysers and parts thereof including secondary brine purification components, jumper switches, filtering elements for hydrogen filters and any other machinery, required for modernisation by using membrane cell technology, of an existing caustic soda unit. 15% - 48 (2) Membranes for replacement of worn out membranes in an industrial plant based on membrane cell technology 238. 85 Video cassettes and video tapes, of a predominantly educational character Nil Nil 49 239. 85 Audio cassettes, if recorded with material from books, newspaper or magazines, for the blind Nil Nil - 240. 85.24 Recorded Magnetic tapes, Compact Disc - Read Only Memory (CD-ROMs) and floppy diskettes, imported by the University Grants Commission for use in computers Nil Nil 50 241. 85 Deflection components for use in colour monitors for computers 5% - - 242. 85 or any other Chapter Goods imported for being tested in specified test centers Nil Nil 51 243. 87 Tricycles designed for use by crippled and disabled persons 15% - - 244. 88 Aeroplanes, helicopters, simulators of aeroplanes and gliders Nil - - 245. Any Chapter Parts of aeroplanes, gliders, helicopters or simulators of aircraft (excluding rubber tyres and tubes for aeroplanes or gliders) 3% Nil 53 246 Any Chapter Raw materials - (i) for manufacture or servicing of aircraft falling under heading No. 88.02; 3% Nil 54 (ii) for manufacture of parts of aircraft at (i) above 247. Any Chapter The following goods, namely :- Nil Nil 73 (i) Satellites and pay-loads brought into India for launch by Indian launch vehicles from Indian soil into Outer Space; (ii) Ground equipment brought for testing of (i) above 248. 89 Barges imported along with ships for the more speedy unloading of imported goods and loading of export goods Nil Nil 55 249. Any Chapter Capital goods and spares thereof, raw materials, parts, material handling equipment and consumables, for repairs of ocean-going vessels by a ship repair unit registered with the Director General of Shipping, Government of India Nil Nil 56 250. 89.06 89.01, 89.02, 89.04, 8905.10, 8905.90 or All goods (excluding vessels and other floating structures as are imported for breaking up) Nil Nil 57 251. Any Chapter Raw materials and parts, for use in the manufacture of goods falling under heading Nos. 89.01, 89.02, 89.04, 89.05 (except 8905.20) or 89.06, in accordance with the provisions of section 65 of the Customs Act, 1962 (52 of 1962) Nil Nil 58 252. Any Chapter Parts, for repair of dredgers Nil Nil - 253. 29, 32, 39, 70 or 90 28, The following goods, namely :- 5 (A) Goods specified in List 18, for the manufacture of telecommunication grade optical fibres or optical fibre cables; 15% - (B) Fibre reinforced plastic rods (FRP), for the manufacture of telecommunication grade optical fibres or optical fibre cables; 25% - (C) Goods specified in List 19, for manufacture of tele-communication grade FRP. 5% - 254. 70 or 90 Perform of Silica for the manufacture of tele- communication grade optical fibres or optical fibre cables 25% - 5 255. 90.01 Optical fibre, for the manufacture of telecommunication grade optical fibre cables 25% - 5 256. 9013.80 Liquid crystal devices 15% - - 257 9013.90 Parts and accessories of Liquid crystal devices 15% - - 258. 9017.10 or 9017.20 Drafting or drawing machines 20% - - 259. 90.22 X-Ray Baggage Inspection Systems and parts thereof Nil - 37 260. 9027.90 Parts and accessories of products of Heading 90.27, other than for gas or smoke analysis apparatus and microtomes 20% - - 261. 84, 85 or 90 The following goods, imported by an accredited press cameraman :- Nil Nil 59 (i) Photographic cameras; (ii) cinematographic cameras; and (iii) lenses, filters, flash light apparatus and exposure meters required for use with the aforesaid cameras 262. 84, 85 or 90 The following goods, imported by an accredited journalist :- Nil Nil 60 (i) Personal computers including lap top personal computers; (ii) typewriters; and (iii) fax machines 263. 90 or any other Chapter Medical and surgical instruments, apparatus and appliances including spare parts and accessories thereof Nil Nil 61 264. 90 or any other Chapter Goods specified in List 20 for live-stock breeding programmes 25% - 62 265. 90 Spare parts of hearing aids 15% - 63 266. 90 or 9804.90 Hearing aid appliances 15% - - 267. 90 or any other Chapter Parts (other than primary cells and primary batteries) for the manufacture of hearing aids including deaf aids 5% Nil 5 268. 90 External silicone breast prosthesis 15% - - 269. 90.22 Linear accelerator with beam energy 15 MeV and above Nil - - 270. Any Chapter Hospital Equipment (equipment, apparatus and appliances, including spare parts and accessories thereof, but excluding consumable items) for use in specified hospitals Nil - 64 271. 90 or any other Chapter The following goods, namely :- (A) Medical equipment (excluding Foley Balloon Catheters) specified in List 21; Nil - - (B) Accessories of the medical equipment at (A) above; Nil Nil - (C) Parts required for the manufacture of the medical equipment at (A) above and spare parts required for the maintenance of the medical equipment at (A) above Nil Nil 39 272. 90 or any other Chapter Life saving medical equipment including accessories or spare parts or both of such equipment Nil - 65 273. 90 or any other Chapter Parts required for the manufacture, and spare parts required for the maintenance, of medical equipment falling under heading Nos. 90.18 to 90.21 and sub-heading Nos. 9022.12, 9022.13, 9022.14 or 9022.21 15% - 39 274. 90 or any other Chapter goods, namely  following The :- (A) Medical equipment specified in List 22; Nil - - (B) Parts required for the manufacture of medical equipment at (A) above and spare parts required for the maintenance of the medical equipment at (A) above Nil Nil 39 275. 90 or any other Chapter The goods, namely following :- (A) Medical equipment specified in List 23; Nil - - (B) Accessories of the medical equipment at (A) above; Nil - - (C) Parts required for the manufacture of the medical equipment at (A) above and spare parts required for the maintenance of the medical equipment at (A) above Nil - 39 276. 90 or any other Chapter Goods for Tubal Occlusion specified in List 24 Nil Nil - 277. 3506.99, 3901.10, 3902.10, 7220.90, 7304.90, 7306.40 or 7306.90 The following goods for the manufacture of syringes and needles falling under heading No. 90.18, namely :- (1) Adhesive epoxy grade falling under sub-heading No. 3506.99; (2) Low density polyethylene falling under sub-heading No. 3901.10; 15% - 5 (3) Polypropylene falling under sub-heading No. 3902.10; (4) Stainless steel strip falling under sub-heading No. 7220.90; (5) Stainless steel capillary tube falling under sub-heading Nos. 7304.90, 7306.40 or 7306.90 278. 90 or any other Chapter Goods specified in List 25 imported by a handicapped or disabled person for his personal use Nil Nil 66 279. 91 or 9804.90 Braille watches and Braille one-day alarm clocks Nil - - 280. 91 Parts and cases, of Braille watches, for the manufacture of braille watches Nil - 5 281. 91 or any other Chapter Parts, for the manufacture of electronic modules (including semi-knocked down packs and completely knocked down packs) of digital, analogue, digiana and similar combination type electronic wrist watches (watches which are designed primarily to show the time of the day, with or without additional features) 25% - 5 282. 95 Requisites for games and sports Nil Nil 67 283. 95 or any other Chapter (i) Synthetic tracks and artificial surfaces of heading No. 95.06; Nil Nil 68 (ii) Equipment required for installation of (i) above 284. Any Chapter The following goods for laying synthetic tracks and artificial surfaces of heading No. 95.06, namely :- Nil Nil 69 (1) Asphalt resurfacer; (2) Acrylic resurfacer; (3) Cushion coat; (4) Acrylic colour concentrate; and (5) Acrylic marking paint 285. 97 Works of art created abroad by Indian artists and sculptors, imported on the return of such artists or sculptors to India Nil Nil - 286. 97.06 Books, being antiques of an age exceeding one hundred years Nil - - 287. 98 Orthopaedic appliances falling under heading No. 90.21, imported by post or air, for personal use 25% - - 288. 98.01 Goods required for - - - 70 (i) fertiliser projects; 5% 10% - (ii) coal mining projects; 5% 16% - (iii) captive power plants of 5 MW or more; 25% 16% - (iv) power generation projects including gas turbine power projects (excluding captive power plants set up by projects engaged in activities other than in power generation); 5% 16% - (v) power transmission projects of 66 KV and above; 25% 16% - (vi) other industrial plants or projects 25% 16% - 289. 98.04 The following goods, imported by post or air, for personal use, namely :- - (A) The life saving drugs or medicines (including diagnostic test kits) specified in List 2 Nil Nil - (B) Other life saving drugs or medicines Nil Nil 7 290 98.05 All goods 40% 16% - 291. Any Chapter Used bona fide personal and household effects belonging to a deceased person Nil Nil 71 292. Any Chapter Goods imported through postal parcels, packets and letters, the duty payable on which is not more than one hundred rupees Nil Nil - 293. Any Chapter Archaeological specimens, photographs, plaster casts or antiquities, intended for exhibition for public benefit in a museum managed by the Archaeological Survey of India or by a State Government Nil Nil 72 294. or 56.01, 96.06 96.07 Fasteners and poly wadding materials Nil Nil 81 295. 99 All goods - Nil - 296. Any Chapter Artificial Plasma 5% Nil - ANNEXURE Condition No. Conditions 1 If the importer gives a declaration that such material is for the purposes of sowing or planting only. 2 If, - (a) import is made under a licence issued under Section J of Part - II of Chapter 15 of the Export and Import Policy 1st April 1997 - 31st March, 2002; (b) the importer at the time of clearance, furnishes a certificate, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Tourism to the effect that the goods imported are essential goods related to hotel and tourism industry and that the hotel or restaurant importing such goods is approved by that Ministry. 3 If the goods are donated as a gift free of cost and supplied under an agreement duly approved by the Government of India. 4 If the importer furnishes an undertaking to the Assistant Commissioner of Customs that the wine shall be used as sacramental wine. 5 If the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996. 6 If, - (a) the importer produces a certificate from a duly authorised officer of the UNICEF to the effect that the said raw materials, intermediates and consumables are required for the manufacture of DTP vaccines; and (b) the importer, at the time of clearance, furnishes an undertaking, in each case, to the effect that the said raw materials, intermediates and consumables shall be used only for the manufacture of DTP vaccines. 7 If, - (a) the goods are imported by an individual for personal use; (b) it is certified in the Form below, by the Director General or Deputy Director General or Assistant Director General, Health Services, New Delhi in each individual case, that the goods are a life saving drug or medicine; and (c) the importer produces the said certificate to the Assistant Commissioner of Customs at the time of clearance, or gives an undertaking as acceptable to the Assistant Commissioner to furnish the said certificate within such period as specified by the Assistant Commissioner, failing which to pay duty leviable thereon. FORM Certified that the drug/medicine .......................... (name of the drug/medicine) being imported by ........... is a life saving drug/medicine and exemption from the payment of customs duty is recommended. Signature with date……………… Name…………………… Designation………………………. Place……………………… 8 If, - (a) imported for the manufacture of solar cells or solar cell modules; and (b) the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996. 9 If, the Central Board of Film Censors or, as the case may be, an officer not below the rank of a Director, All India Radio or Doordarshan, certifies that the said film is predominantly educational in character. 10 If certified by the Ministry of Defence that the film is predominantly educational in character and is meant for training of defence personnel. 11 If certified by the Ministry of Information and Broadcasting that the films and video cassettes are intended for archival study, or record and reference purposes. 12 If, - (a) imported for the manufacture of Copper-T Contraceptives; and (b) the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996. 13 If, - (a) the wood pulp is imported for the manufacture of newsprint, that is to say, paper intended for the printing of newspapers, books and periodicals; (b) the newsprint manufactured in terms of (a) above is supplied to a newspaper; and (c) the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996. Explanation . - For the purpose of this condition, "newspaper" means a newspaper registered by the Registrar of Newspapers for India under the provisions of the Press and Registration of Books Act, 1867 (25 of 1867). 14 If at the time of importation, the importer, - (1) in all cases [excluding the case of the goods at item No. 9 of List 3 (B)], produces a valid registration-cum-membership certificate issued by the Council for Leather Exports sponsored by the Government of India in the Ministry of Commerce; and (2) furnishes an undertaking to the Assistant Commissioner of Customs to the effect that - (a) the imported goods shall be used in the leather industry, or as the case may be, for the manufacture of leather chemicals to be used in the leather industry; (b) he shall maintain an account of the imported goods, received and consumed in the place of manufacture for the above purpose, in the manner specified by the said Assistant Commissioner; (c) he shall, within three months or such extended period as the said Assistant Commissioner may allow, produce the extract of the aforesaid account, duly certified by the Assistant Commissioner of Central Excise having jurisdiction over the factory manufacturing the goods, to the effect that the said goods have been used for the aforesaid purpose; and (d) he shall pay, in the event of his failure to comply with the conditions above, an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation. 15 If, - (a) the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996; and (b) in respect of the goods manufactured from the imported goods, the importer produces to the Assistant Commissioner of Central Excise having jurisdiction over his factory, within such period as the said Assistant Commissioner may allow, a certificate issued by an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Environment and Forests to the effect that the said manufactured goods are intended for pollution control purposes. 16 If the said coins are imported with the approval of the Reserve Bank of India and are utilised for disbursement by the Scheduled bank in accordance with the regulations of the Reserve Bank of India, sanctioning foreign exchange for travellers. Explanation . - The expression "Scheduled bank" means the State Bank of India constituted under the State Bank of India Act, 1955 (23 of 1955), a subsidiary bank as defined in the State Bank of India (Subsidiary Banks) Act, 1959 (38 of 1959), a corresponding new bank constituted under section 3 of the Banking Companies (Acquisition and Transfer of Undertaking) Act, 1970 (5 of 1970) or any other bank, being a bank included in the Second Schedule to the Reserve Bank of India Act, 1934 (2 of 1934). 17 If, - (a) the importer furnishes an undertaking to the Assistant Commissioner of Customs that such melting scrap will be used for the purpose specified and in the event of his failure to comply with this condition, he shall be liable to pay, in respect of such quantity of the said scrap as is not proved to have been so used, an amount equal to the difference between the duty leviable on such quantity but for the exemption under this notification and that already paid at the time of importation; and (b) the importer produces to the said Additional Commissioner, within six months or such extended period, as that Assistant Commissioner may allow, a certificate issued by the Assistant Commissioner of Central Excise in whose jurisdiction the said melting scrap of iron and steel has been used in electric arc furnace or induction furnace or melting in a hot blast cupola, that the said melting scrap has been so used. 18 If the re-rollable scrap consists of seconds and defectives or cuttings/rejected ingots/slabs/blooms/ billets, bars, rods, angles, shapes and sections, rails and railway materials, such as wheels, axles, sleepers, sleeper bars, fish plates and flat rolled products suitable for re-rolling without undergoing process of melting and of length 2000 mm. (maximum), width 800 mm. (maximum), thickness/diameter 8 mm. (minimum). In case of rails and railway materials, there will be no size restriction. 19 If, - (a) the horological raw materials are imported for the manufacture of parts of wrist watches (watches designed primarily to show the time of the day, with or without additional features), mechanical or quartz analog; and (b) the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996. 20 If, - (a) the goods at (i) to (vi) in List 5 appended to the notification are imported for use in the flyash based building materials industry or the goods at (vii) to (xii) are imported for use in the phosphogypsum based building materials industry or the goods at (xiii) to (xviii) are imported for making clay-flyash bricks or the goods at (xix) to (xxvii) of that List are imported for production of pre-fabricated parts; (b) an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Urban Affairs and Employment certifies in each case that the said goods are for use in the industry specified above and recommends grant of the exemption; and (c) the importer furnishes to the Assistant Commissioner of Customs an undertaking to the effect that he shall use the goods for the purpose specified and in the event of his failure to do so, he shall be liable to pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 21 If the importer, at the time of importation, furnishes an undertaking to the Assistant Commissioner of Customs to the effect that he shall use the imported goods for the purposes specified in column (3) of the Table to this notification and that he shall within such period as the said Assistant Commissioner may specify in this behalf, produce a certificate from the Assistant Commissioner of Central Excise having jurisdiction over the factory manufacturing the fuel injection equipment, to the effect that the imported goods have been used for the purpose specified. 22 If the importer at the time of importation, - (A) furnishes in all cases a certificate to the Assistant Commissioner of Customs, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Non-Conventional Energy Sources recommending the grant of this exemption and in the case of the goods at (ii) to (iv) in column (3) of the Table to this notification, the said officer certifies that the goods are required for the specified purposes; and (B) furnishes an undertaking to the said Assistant Commissioner to the effect that, - (a) in the case of wind operated electricity generators upto 30 KW or wind operated battery chargers upto 30 KW, he shall not sell or otherwise dispose off, in any manner, such generators or chargers for a period of two years from the date of importation; (b) in the case of other goods specified at (ii) to (iv) in column (3) of the said Table, he shall use them for the specified purpose; and (c) in case he fails to comply with sub-conditions (a) or (b), or both conditions, as the case may be, he shall pay an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation. 23 If, - (a) the project for substitution of ozone depleting substances (ODS) or the project for setting up of new capacity with non-ODS technology has been approved by the Steering Committee set up in the Ministry of Environment and Forests for the clearance of such projects; and (b) the importer furnishes in each case a list, of the goods required for the aforesaid projects, which is duly certified, to the effect that the goods mentioned in the said list are required for the aforesaid projects, by an officer not below the rank of a Deputy Secretary in the Ministry of Environment and Forests. 24 (1) If an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Fertilisers, - (i) certifies that the scheme for renovation or modernisation, as the case may be, of the fertilizer plant has been granted techno-economic clearance by the said Department; (ii) recommends, in each case, the grant of exemption under this notification to, - (a) Machinery, instruments, apparatus and appliances, as well as components (whether finished or not) or raw materials for the manufacture of aforesaid items and their components, required for renovation or modernisation of a fertiliser plant; and (b) spare parts, other raw materials (including semi-finished material) or consumable stores, essential for maintenance of the fertiliser plant mentioned above, (hereinafter referred to as the said goods), for such scheme; and (iii) certifies in each case, that the said goods are, or will be, required for the purposes specified above; (2) the value of import of the goods specified in sub-clause (b) of clause (ii) of sub-condition (1) shall not exceed 10% of the value of imported goods specified in sub-clause (a) of the said clause; (3) if the importer furnishes an undertaking to the Assistant Commissioner of Customs to the effect that the said imported goods shall be used for the purposes specified above and in the event of his failure to use the goods for such purposes, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 25 If, - (1) the spinnerettes acquired in exchange, are imported, within one year of the date of exportation of spinnerettes out of India; and (2) no drawback of duty has been paid on the occasion of their export. Explanation . - On the imports referred to in condition (1) above, the duty would be leviable as if the value of the said spinnerettes were equal to - (i) the cost of such exchange, that is to say, the aggregate of - (a) labour charges; (b) price charged for that quantity of gold, platinum and rhodium, if any, which is in excess of the respective quantity of gold, platinum or rhodium contained in the said spinnerettes exported out of India; and (c) any other charges paid by the importer to the supplier of such spinnerettes for such exchange of spinnerettes; and (ii) the insurance and freight charges, both ways. 26 If, - (A) imported by a State Fisheries Corporation or any Fisheries Co-operative Federation recognised by the State Government; or (B) imported by a person other than a State Fisheries Corporation or any fisheries Co-operative Federation recognised by the State Government concerned, - (i) the importer produces a certificate, from an officer not below the rank of a Deputy Secretary of the Department concerned with fisheries in the State Government, to the effect that the spares are being imported with outboard motors meant for fitment to boats which are exclusively used for fishing operations and that such spares are for the purpose of maintenance of the said outboard motors and, recommending the grant of the concession; and (ii) the importer furnishes an undertaking to the Assistant Commissioner of Customs at the time of importation to the effect that - (a) the said spares shall be used for the purpose specified above; and (b) he shall pay on demand in the event of his failure to comply with (a) above an amount equal to the difference between the duty leviable on the said spares but for the exemption under this notification and that already paid at the time of importation. 27 If imported by any State Fisheries Corporation or any Fisheries Co-operative Federation recognised by the State Government concerned. 28 If at the time of importation, the importer produces a certificate, from an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Commerce, to the effect that the imported goods are required for being used in a Green House. 29 If at the time of importation, the importer produces a certificate, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Environment and Forests, to the effect that the imported kits or parts thereof are required for the conversion of motor-spirit or diesel driven vehicles into Compressed Natural Gas driven vehicles. 30 The importer at the time of clearance produces a certificate from the Chairman Airport Authority of India duly countersigned by an officer not below the rank of a Joint Secretary to the Government of India in the Ministry of Civil Aviation that the navigational, communication, air-traffic control and landing equipment and spares for maintenance of such equipment are required to be used for the modernisation of airport facilities and recommends the grant of exemption to the said goods. 31 If the importer, - (a) at the time of clearance produces a certificate from an officer not below the rank of a Joint Secretary to the Government of India in the Ministry of Tourism to the effect that the imported goods are required for initial setting up of a hotel or for substantial expansion of a hotel, duly approved by that Ministry; and (b) produces evidence to the satisfaction of the Assistant Commissioner of Customs within two years from the date of importation or within such extended period as the said Assistant Commissioner may allow, to the effect that the goods have been actually used for the purpose specified at (a) above. 32 If, - (i) in the case of a power plant (except a nuclear power plant),- (a) in the case of Central Power Sector Undertakings, the Chairman of the concerned Undertaking certifies that the scheme for renovation or modernisation, as the case may be, of such power plant, has been approved and an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Power recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; (b) in other cases, an officer not below the rank of the Chief Engineer of the concerned State Electricity Board or State Power Utility certifies that the scheme for renovation or modernisation, as the case may be, of such power plant, has been approved and an officer not below the rank of a Secretary in the State Government concerned dealing with the subject of power or electricity recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; (ii) in the case of nuclear power plant, an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Atomic Energy certifies the scheme for renovation or modernisation, as the case may be, of such power plant, has been approved and recommends the grant of the aforesaid exemption to the goods for such scheme; and (iii) in all cases, the importer furnishes an undertaking to the Assistant Commissioner of Customs to the effect that the said goods shall be used for the purpose specified above and in the event of his failure to use the goods for the renovation or modernisation of the said power generation plant, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 33 If, - (a) in the case of small hydel power generation plants upto 3 MW station capacity, an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Non-Conventional Energy Sources certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said hydel power generation plant and recommends the grant of this exemption to the imported goods; (b) in the case of nuclear power generation plant, an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Atomic Energy certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said power generation plant and recommends the grant of this exemption to the imported goods; (c) in the case of power generation plants (except those specified above),- (i) in the case of Central Power Sector Undertakings, the Chairman of the concerned Undertaking certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said power generation plant and an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Power recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; (ii) in other cases, an officer not below the rank of the Chief Engineer of the concerned State Electricity Board or State Power Utility certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said power generation plant and an officer not below the rank of a Secretary in the State Government concerned dealing with the subject of power or electricity recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; and (d) in all cases, the importer furnishes an undertaking to the Assistant Commissioner of Customs to the effect that the imported goods shall be used for the purpose specified above and in the event of his failure to use the goods for the purpose specified, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 34 If, - (a) the goods are imported by the Oil and Natural Gas Corporation or Oil India Limited (hereinafter referred to as the "licensee") or a sub-contractor of the licensee and in each case in connection with petroleum operations to be undertaken under petroleum exploration licences granted by the Government of India on nomination basis; (b) where the importer is a licensee, he produces to the Assistant Commissioner of Customs, at the time of importation, the following, namely, a certificate from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the licences referred to in that clause, and (c) where the importer is a sub-contractor, he produces to the Assistant Commissioner of Customs, at the time of importation, the following, namely :- (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the licences referred to in that clause and containing the name of such sub-contractor, (ii) an affidavit to the effect that such sub-contractor is a bona fide sub-contractor of a licensee, (iii) an undertaking from such licensee, binding him to pay any duty, fine or penalty that may become payable, if any of the conditions of this notification are not complied with by such sub-contractor or licensee, as the case may be, and (iv) a certificate, in the case of a petroleum exploration license granted on nomination basis, that no foreign exchange remittance is made for the import of such goods undertaken by the sub-contractor on behalf of the licensee : Provided that nothing contained in this sub-clause shall apply if such sub-contractor is an Indian Company or Companies. 35 If, - (a) the parts and raw materials are used in the manufacture of goods in accordance with the provisions of Section 65 of the Customs Act, 1962 (52 of 1962); and (b) a certificate is produced in each case to the Assistant Commissioner of Customs from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the goods are required for the purposes of off-shore oil exploration or exploitation. 36 If, - (a) the goods are imported by an Indian Company or Companies, a Foreign Company or Companies, or a consortium of an Indian Company or Companies and a Foreign Company or Companies (hereinafter referred to as the "contractor") or a sub-contractor of the contractor and in each case in connection with petroleum operations to be undertaken under a contract with the Government of India; (b) where the importer is a contractor, he produces to the Assistant Commissioner of Customs, at the time of importation, the following, namely :- (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the contract referred to in that clause, and (ii) a certificate, in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the imports of such goods undertaken by such Foreign Company or Companies; (c) where the importer is a sub-contractor, he produces to the Assistant Commissioner of Customs, at the time of importation, the following, namely :- (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the contract referred to in that clause and containing, the name of such sub-contractor, (ii) an affidavit to the effect that such sub-contractor is a bonafide sub-contractor of a contractor, (iii) an undertaking from such contractor, binding him to pay any duty, fine or penalty that may become payable, if any of the conditions of this notification are not complied with, by such sub-contractor or contractor, as the case may be, and (iv) a certificate, in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the import of such goods undertaken by the sub-contractor on behalf of the Foreign Company or Companies : Provided that nothing contained in this sub-clause shall apply if such sub-contractor is an Indian Company or Companies. 37 If, - (a) where the importer is the Government of India or a person authorised by that Government, or the goods are shipped on the order of a Department of that Government and are appropriated under such order at the time of shipment, for use in anti-smuggling operations, he produces, at the time of importation, a certificate from the Under Secretary to the Government of India in the Department of Revenue to the effect that the said goods are intended for the aforesaid use; (b) where the importer is a Police Force of a State or a Union Territory or the Central Reserve Police Force, the National Security Guard or the Special Protection Group and the said goods are imported for bomb detection or disposal purposes, he produces, at the time of importation, a certificate from an officer in the Ministry of Home Affairs not below the rank of an Under Secretary to the Government of India to the effect that the said goods are intended for the aforesaid use. 38 If the importer produces a certificate from an officer not below the rank of a Joint Director in the Department of Electronics, Government of India, mentioning the technical specifications, description and quantity of the moulds, tools and dies and certifying that they are required for the manufacture of electronic parts and recommending grant of exemption. 39 If the importer furnishes an undertaking to the Assistant Commissioner of Customs, to the effect that - (a) the parts, or as the case may be, the spare parts shall be used for the manufacture or maintenance, as the case may be, of the specified medical equipment; (b) he shall, within three months or such extended period that the said Assistant Commissioner may allow, produce - (i) in the case of parts, a certificate from the Assistant Commissioner of Central Excise having jurisdiction over the factory manufacturing the specified medical equipment, to the effect that the parts have been used in the manufacture of the specified medical equipment; or (ii) in the case of spare parts, necessary evidence to the satisfaction of the Assistant Commissioner of Customs to the effect that the spare parts have been used for the maintenance of the specified medical equipment; and (c) he shall pay on demand, in the event of his failure to comply with the above conditions, an amount equal to the difference between the duty leviable on such quantity of the parts or, as the case may be, spare parts, but for the exemption under this notification and that already paid at the time of importation. 40 The goods are imported for use in the manufacture of goods falling under Chapter 84 (other than those falling under Heading Nos. 84.15, 84.50, 84.69, 84.70, 84.71, 84.72, 84.73, 84.82, and 84.85 and sub-heading Nos. 8407.31, 8407.32, 8407.33, 8407.34, 8408.20, 8409.91, 8409.99, 8414.30, 8414.80, 8414.90, 8418.21, 8418.22, 8418.29, 8418.91, 8418.99, 8422.11, 8422.19, 8423.10, 8448.19, 8451.10, 8451.90, 8452.10, 8452.30, 8452.40, 8452.90, 8479.50, 8479.60, 8479.89 and 8483.20) or Chapter 85 (other than those falling under Heading Nos. 85.06, 85.07, 85.09, 85.10, 85.11, 85.12, 85.13, 85.16, 85.18, 85.19, 85.20, 85.21, 85.22, 85.23, 85.24, 85.26, 85.27, 85.28, 85.31, 85.32, 85.35, 85.36, 85.37, 85.38, 85.39, 85.40, 85.41, 85.42, 85.44 and 85.48 and sub-heading Nos. 8525.30 and 8525.40) of the First Schedule of the Customs Tariff Act, 1975 (51 of 1975). 41 If an accredited representative of the foreign film unit or the television team executes a bond in such form and with such surety as may be acceptable to the Assistant Commissioner of Customs, binding himself to pay on demand an amount equal to the duty leviable on such equipment and cameras if the same are not placed under customs control for re-export within a period of three months or such extended period as the said Assistant Commissioner may permit, after clearance for home consumption. 42 If the importer at the time of import - (1) furnishes a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Atomic Energy, Government of India, to the effect that the imported goods (in respect of description, quantity and technical specifications) are required for the manufacture of laser and laser based instrumentation; and (2) furnishes an undertaking to the Assistant Commissioner of Customs to the effect that the imported goods shall be used for the above purpose and he shall pay, on demand, in the event of his failure to use the imported goods for the above purpose, an amount equal to the difference between the duty leviable on such quantity of the imported goods but for the exemption under this notification and that already paid at the time of importation. 43 If the importer produces to the Assistant Commissioner of Customs at the time and place of importation, - (i) a certificate issued by an officer not below the rank of a Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting to the effect that the importer is an accredited news agency; and (ii) an undertaking to the effect that the imported goods shall remain in the possession, control and use of the agency and shall not be sold or parted with for a period of five years from the date of importation. 44 If, - (a) the goods are imported by a newspaper establishment registered with the Registrar of Newspapers for India appointed under Section 19A of the Press and Registration of Books Act, 1867 (25 of 1867); and (b) the importer at the time of import produces before the Assistant Commissioner of Customs - (1) a certificate issued by the Registrar of Newspapers for India recommending the grant of exemption under this notification; and (2) an undertaking to the effect that the imported goods shall remain in his possession, control and use and shall not be sold or parted with for a period of five years from the date of importation and in case the said goods are sold thereafter, the sale shall be subject to the permission granted by the Registrar of Newspapers for India. 45 If, - (a) the duties of customs leviable on the specified equipment, raw films and tapes had been paid at the time of their first importation into India; (b) no drawback of duty was paid on their exportation from India; (c) the identity of the goods is established to the satisfaction of the Assistant Commissioner of Customs at the time of availing of this concession; (d) the goods are reimported into India within six months or such period not exceeding one year from the date of their export from India, as may be extended by the said Assistant Commissioner on sufficient cause being shown to his satisfaction; and (e) the External Publicity Division of the Ministry of External Affairs certifies that the purpose for which the goods had been exported from India was in public interest and had been sponsored or approved by the Government of India. 46 If, - (a) the total C.I.F. value of the wireless apparatus, accessories and parts, imported under this notification does not exceed seventy-five thousand rupees; (b) the total value of the parts imported under this exemption does not exceed Rs. 1,000; (c) the importer at the time of clearance, produces a certificate from an officer not below the rank of an Assistant Wireless Adviser to the Government of India in the Ministry of Communications to the effect that the wireless apparatus, accessories and parts in respect of which this exemption is claimed are within the value limit specified above, and also recommending the grant of this exemption. Explanation. - "Licensed amateur radio operator" means a person duly authorised under the Indian Wireless Telegraphs (Amateur Service) Rules, 1978, made under Sections 4 and 7 of the Indian Telegraph Act, 1885 (13 of 1885). 47 If, - (a) imported by M/s. Bharat Electronic Limited for further manufacture and supply to the Airports Authority of India; and (b) the importer at the time of clearance produces a certificate from the Director General of Civil Aviation that the imported goods are required to be used for the modernisation of airport facilities and recommends the grant of this exemption. 48 If the importer, at the time of importation furnishes an undertaking to the Assistant Commissioner of Customs to the effect that, - (a) the imported goods shall be used for the specified purposes and shall not be sold or otherwise disposed off in any manner for a period of at least two years from the date of importation; and (b) in the event of failure to comply with (a) above, he shall be liable to pay an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation. 49 If in the case of imports, - (1) for the Teleteach or Margdarshan Programme, the Managing Director of M/s. Electronic Trade and Technology Development Corporation Limited, certifies that the said cassettes and tapes are predominantly educational in character and the importer furnishes an undertaking to the effect that - (i) the certificate from the Central Board of Film Certification in the Form below, shall be produced within a period of three months or such extended period as the Assistant Commissioner of Customs may allow; and (ii) he shall pay on demand, in the event of his failure to comply with clause (i) above, an amount equal to the difference between the duty leviable on such quantity of said cassettes and tapes but for the exemption under this notification and that already paid at the time of importation; or (2) made by the Television Centre of All India Radio, the Director of the said Centre at New Delhi in the said Form, and in other cases, the Central Board of Film Certification, certifies in each case, that the video cassettes and video tapes in respect of which exemption is claimed are predominantly educational in character. FORM Certificate No....of 19.... This is to certify that the parcel containing the following video cassettes and video tapes was delivered to Shri....Regional Officer/Assistant Regional Officer, CBFC at Mumbai/Calcutta/Chennai/the Director of the Television Centre of All India Radio, New Delhi, who examined the seals and identified the video cassettes and video tapes according to the particulars certified at the time of Customs examination, and that the Board/Director is satisfied that the video cassettes and video tapes are predominantly educational in character. Particulars of cassette/tape and film recorded thereon : Particulars of the producer : Length of Cassette/Tape : Name of the importer : Date : Signature of Regional Officer /Assistant Regional Officer/Director, Television Centre, AIR, New Delhi. 50 If the importer, at the time and place of clearance,- (a) produces a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Human Resource Development, Department of Education, to the effect that the imported recorded magnetic tapes, CD-ROMs and floppy diskettes are recorded with educational or scientific material for use in computers and are required by Institutes or Research Centres duly approved by the University Grants Commission; (b) gives an undertaking to the Assistant Commissioner of Customs to the effect that such imported goods shall not be - (1) used for any other purpose and shall not be subsequently recorded with any other material; and (2) shall not be sold or parted with, without the prior permission of the Commissioner of Customs of the port of importation. 51 If, - (1) the goods are imported for being tested in - (a) Defence Research and Development Organisation (DRDO) laboratories; (b) Indian Institutes of Technology; (c) Council for Scientific and Industrial Research (CSIR) laboratories; (d) Central Power Research Institute, Bangalore; or (e) Any other test centre approved by any Ministry in the Government of India for this purpose; and (2) the Head of any of the organisations specified above certifies that the goods have been imported by that organisation only for the purpose of testing and shall not be used or sold after such testing. 52 If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing Public Mobile Radio Trunked Service (PMRTS). 53 If the parts are required for manufacture or servicing of aeroplanes, gliders, helicopters, or simulators of aircraft. Explanation . - "Parts of aeroplanes, gliders, helicopters or simulators of aircraft" shall include engines, engine parts, wireless transmission apparatus, wireless receivers, iron and steel washers and screws, ball and roller bearings and other parts. 54 If an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Civil Aviation certifies in each case the description and quantity of such raw materials which are required for the manufacture or servicing of the specified aircraft or parts of such aircraft, as the case may be. 55 If, - (a) the importer makes a declaration at the time of import that the barges would be re-exported; (b) the barges are re-exported, by the same ship which brought them or by any other ship under the same shipping agency, within two months of the date of importation or such extended period as the Assistant Commissioner of Customs may allow; and (c) the importer executes a bond, in such form and for such sum as may be specified by the Assistant Commissioner of Customs, binding himself to pay that sum if the re-export does not take place within the period specified under condition (b) above. 56 If, - (a) the importer maintains a proper account of import, use and consumption of the specified goods imported for the purpose of repairs of ocean-going vessels and submits such account periodically to the Commissioner of Customs in such form and in such manner as may be specified by the said Commissioner. (b) the importer, by the execution of bond, in such form and for such sum as may be specified by the said Commissioner, binds himself to pay on demand an amount equal to the duty leviable, - (1) on the capital goods or spares thereof or material handling equipment, as are not proved to the satisfaction of the said Commissioner to have been installed or otherwise used for the aforesaid purpose; (2) on parts, raw material and consumables, as are not proved to the satisfaction of the said Commissioner to have been used or consumed for the aforesaid purpose, within a period of three months from the date of importation thereof or within such extended period as that Commissioner, on being satisfied that there is sufficient cause for not installing, using or consuming them, as the case may be, for the aforesaid purpose within the said period, allow. Explanation. - "Ocean going vessels" includes - (a) liners; cargo-vessel of various kinds including refrigerator vessels for the transport of meat, fruit or the like, vessels specified for the transport of particular goods (grain, coal, ores or the like); tankers (petrol, wine or the like); yachts and other sailing vessels; cable ships; ice-breakers; floating factories of all kinds (for processing whales, preserving fish or the like) whale catchers; trawlers and other fishing vessels; life boats, scientific research vessels; weather ships; vessels for the transportation or mooring of buoys; pilot-boats; hopper barges for the disposal of dredged material or the like; (b) war ships of all kinds including submarines; (c) tugs, dredgers, fire-floats and salvage ships; and (d) oil rigs, drilling ships and jack-up rigs. 57 If the vessels and other floating structures are intended to be broken up after their importation, the importer shall present a fresh bill of entry to the Commissioner of Customs, and thereupon such goods shall be chargeable with the duty which would be payable on such goods as if they were entered for home consumption, under section 46 of the Customs Act, 1962 ( 52 of 1962), on the date of the presentation of such fresh bill of entry, for the purposes of break-up of such goods. 58 If any of the goods manufactured from the imported raw materials and parts, are subsequently intended to be broken up, a bill of entry in respect of such manufactured goods shall be presented to the Commissioner of Customs and thereupon these goods shall be chargeable with the duty which would be payable as if such manufactured goods had been imported and entered for home consumption, under section 46 of the Customs Act, 1962 (52 of 1962), on the date of the presentation of such fresh bill of entry, for the purposes of break-up of such manufactured goods. 59 (i) If the importer produces a certificate from an officer not below the rank of a Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting to the effect that the importer is an accredited press cameraman, and that the importer has not availed, on any occasion in the previous five years, exemption under this notification or the notification of the Government of India in the Ministry of Finance (Department of Revenue) No. 52/85-Customs, dated the 4th March, 1985 or No. 36/96-Customs, dated the 23rd July, 1996 or No. 11/97-Customs, dated the 1st March, 1997 or No. 23/98-Customs, dated the 2nd June, 1998; (ii) the exemption under this notification shall be applicable to that portion of C.I.F. value of the specified cameras, lenses and other goods, which does not exceed one lakh rupees; and (iii) if the importer gives an undertaking to the Assistant Commissioner of Customs at the time and place of importation to the effect that the said goods shall remain in his possession, control and use and shall not be sold or parted with for a period of five years from the date of importation. 60 (i) If the importer produces a certificate from an officer not below the rank of a Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting to the effect that the importer is an accredited journalist, and that the importer has not availed, on any occasion in the previous five years, exemption under this notification or the notification of the Government of India in the Ministry of Finance (Department of Revenue) No. 83/93-Customs, dated the 28th February, 1993 or No. 36/96-Customs, dated the 23rd July, 1996 or No. 11/97-Customs, dated the 1st March, 1997 or No. 23/98-Customs, dated the 2nd June, 1998; (ii) the exemption under this notification shall be applicable to that portion of C.I.F. value of the specified personal computers, typewriters and fax machines, which does not exceed one lakh rupees; and (iii) if the importer gives an undertaking to the Assistant Commissioner of Customs at the time and place of importation to the effect that the said goods shall remain in his possession, control and use and shall not be sold or parted with for a period of five years from the date of importation. 61 If, - (a) imported by any Department or Ministry of the Government of India; and (b) the importer produces a certificate from an officer not below the rank of a Joint Secretary to the Government of India in the concerned Department or Ministry, certifying that the said goods are being imported under an agreement relating to Government to Government Assistance Programme with any other country. 62 If an officer not below the rank of a Deputy Secretary in the Department of Animal Husbandry and Dairying in the Ministry of Agriculture, Government of India, is satisfied that the imported goods are required for the purpose of live-stock breeding programmes and certifies to this effect and recommends grant of the exemption. 63 If the spare parts are, - (a) essential for the working of hearing aids and have been given for that purpose some special shape or quality which would not be essential for use for any other purpose; (b) imported by or on behalf of an association for the handicapped or by a handicapped person for his own use. 64 If, - (a) the hospital is run by - (1) the Central Government, a State Government, a Union Territory Administration or a Local Authority; or (2) institutions established by or under any law for the time being in force; or (3) societies registered under any law for the time being in force relating to registration of societies, such societies being controlled by any of the authorities mentioned in (1) above; (b) the importer produces a certificate, from the Directorate General of Health Services to the Government of India or the Ministry of Health and Family Welfare in the Government of India, or from the State Government, the Union Territory Administration or the Local Authority running or controlling that hospital, as the case may be, to the effect that the said hospital falls in any of the categories specified at (a) above; and (c) the head of the hospital certifies in each case that the hospital equipment is meant for use in the hospital and is not manufactured in India and is essential for running or maintenance of the hospital. Explanation .- "Hospital" includes any Institution, Centre, Trust, Society, Association, Laboratory, Clinic and Maternity Home, which renders medical, surgical or diagnostic treatment. 65 If the importer at the time of importation, - (a) produces a certificate from the Director General or Deputy Director General or Assistant Director General, Health Services, New Delhi, in each case, in the Form below; or (b) furnishes an undertaking acceptable to the Assistant Commissioner of Customs to the effect that the aforesaid certificate shall be produced before the said Assistant Commissioner within the period specified by the Assistant Commissioner, failing which he would pay the duty leviable thereon. FORM Certified that the medical equipment/accessory/spare part .............. (name to be specified) being imported by ............. is a life saving medical equipment, accessory or spare part and exemption from payment of customs duty is recommended. Signature with date of Director General/ Deputy Director General/ Assistant Director General, Health Services, New Delhi 66 If the importer produces to the Assistant Commissioner of Customs, at the time of importation, a certificate from the Civil Surgeon or the District Medical Officer or the Administrative Medical Officer or the Director of Health Services of the concerned State or a Specialist in the concerned speciality attached to a Government Hospital or a recognised medical college to the effect that the importer suffers from the particular handicap or disability and that the imported goods in respect of which the exemption is claimed are essential to overcome the said handicap or disability. 67 If certified by the apex body in relation to the concerned game or sport (the highest organisation, other than Government, by which the game or sport is controlled or regulated), that the requisites for games and sports are required to be used in a national or international championship or competition to be held in India or abroad. 68 If, - (a) the synthetic tracks and artificial surfaces and equipment required for their installation are imported under the "Scheme for Laying Synthetic Tracks and Artificial Surfaces" of the Department of Youth Affairs and Sports, Government of India; (b) the importer, at the time of import - (1) produces before the Assistant Commissioner of Customs a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the said Department certifying that the import of the said tracks and surfaces is under the "Scheme for Laying Synthetic Tracks and Artificial Surfaces" and also recommending the grant of the exemption; and (2) gives an undertaking to the effect that the equipment imported for installation of the said tracks and surfaces shall be re-exported within a period of six months from the date of importation, and in the event of failure to comply with the same he shall pay on demand an amount equal to the difference between the duty leviable on such goods but for the exemption under this notification and that already paid at the time of importation. 69. If, - (a) the goods are imported into India by a National Sports Federation, under a certificate issued by the Sports Authority of India or imported by the Sports Authority of India, for use in a national or international championship or competition, to be held in India or abroad; and (b) the importer, at the time of clearance of the goods, produces a certificate to the Assistant Commissioner of Customs from an officer not below the rank of a Director in the Sports Authority of India certifying - (i) the name and address of the importer of the goods and the description, quantity and value of the goods, and (ii) that the goods are required for the purpose specified at (a) above. 70 In the case of goods required for the specified projects, the exemption under this notification shall not affect the exemption granted under any other notification of the Government of India in the Ministry of Finance (Department of Revenue) in so far as it relates to the duty of customs leviable under the First Schedule to the Customs Tariff Act, 1975 (51 of 1975). 71 If a certificate from the Indian Mission concerned, about the ownership of the goods by the deceased person, is produced at the time of clearance of the goods through Customs station. 72 If the imported goods are meant to be exhibited in a museum managed by, - (a) the Archaeological Survey of India, such goods shall be imported under cover of a certificate issued by the Director General of Archaeology in India; or (b) a State Government, such goods shall be imported under cover of a certificate issued by the concerned Authority in the concerned State Government. 73 If, the importer, at the time of import - (i) produces before the Assistant Commissioner of Customs a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Space certifying that the said satellites and pay-loads are for launch by Indian launch vehicles from Indian soil into Outer Space in conformity with the provisions of the Outer Space Treaty of 1967; and (ii) gives an undertaking to the effect that the ground equipment imported for testing the satellites or pay-loads shall be re-exported within a period of six months from the date of their importation or such extended period as the Assistant Commissioner of Customs may allow, and in the event of failure to comply with the same he shall pay on demand an amount equal to the difference between the duty leviable on such goods but for the exemption under this notification and that already paid at the time of importation. 74 If the importer furnishes an undertaking to the Assistant Commissioner of Customs that the coin blanks shall be used only for the purpose of coining of coins in a Mint of the Government of India. 75 If, - (a) the goods are imported by- (i) the Ministry of Surface Transport, or (ii) a person who has been awarded a contract for the construction of roads in India by or on behalf of the Ministry of Surface Transport, by the National Highway Authority of India, by Public Works Department of a State Government or by a road construction corporation under the control of the Government of State or Union Territory; (b) the importer, at the time of importation, furnishes an undertaking to the Assistant Commissioner of Customs to the effect that he shall use the imported goods exclusively for the construction of roads and that he shall not sell or otherwise dispose of the said goods, in any manner, for a period of five years from the date of their importation; and (c) In case of goods of serial No. 12 and 13 of List 27, the importer, at the time of importation of such goods, also produces to the Assistant Commissioner of Customs, a certificate from an officer not below the rank of Deputy Secretary to the Government of India in the Ministry of Surface Transport (Roads Wing), to the effect that the imported goods are required for construction of roads in India. 76 If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing basic mobile telephone service. 77 If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing cellular mobile telephone service. 78 If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing radio paging service. 79 If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing value added services via VSAT system. 80 If, - (a) the goods are imported by an Indian Company or Companies, a Foreign Company or Companies, or a consortium of an Indian Company or Companies and a Foreign Company or Companies (hereinafter referred to as the "contractor") or a sub-contractor of such Company or Companies or such consortium and in each case in connection with petroleum operations to be undertaken under a contract signed with the Government of India, on or after the 1st day of April, 1998, under the New Exploration Licensing Policy of the said First Schedule; (b) where the importer is a contractor, he produces to the Assistant Commissioner of Customs, at the time of importation, the following, namely, - (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbon, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for such petroleum operations and have been imported under a contract signed under the New Exploration Licensing Policy; and (ii) a certificate, in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the imports of such goods undertaken by the Foreign Company or Companies; (c) where the importer is a sub-contractor, he produces to the Assistant Commissioner of Customs, at the time of importation, the following, namely, - (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbon, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under a contract signed under the New Exploration Licensing Policy and containing the name of such sub-contractor. (ii) an affidavit to the effect that such sub-contractor is a bona fide sub-contractor of a contractor. (iii) an undertaking from such contractor, binding him to pay any duty, fine or penalty that may become payable, if any of the conditions of this notification are not complied with, by such sub-contractor or contractor, as the case may be; and (iv) a certificate, in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the import of such goods undertaken by the sub-contractor on behalf of the Foreign Company or Companies : Provided that nothing contained in the sub-clause shall apply if such sub-contractor is an Indian Company or Companies. 81 If, - (a) the goods are imported by a manufacturer of textile garments for use in the manufacture of textile garments for export by that manufacturer and that the said manufacturer is registered with the Apparel Export Promotion Council; (b) the value of goods imported does not exceed 2% of the FOB value of textile garments exported during the preceding financial year; and (c) the importer produces a certificate from the Apparel Export Promotion Council certifying the value of exports made during the financial year mentioned in clause (b) above and also the value and quantity of fasteners and poly wadding materials already imported under this notification during the current financial year. LIST 1 (See S. No. 21 of the Table) (1) Amprolium hydrochloride (2) Ascorbyl dipotassium 2 sulphate dihydrate (3) Ascorbyl polyphosphate (4) Avoparcin (5) Bovine albumin fraction (6) Bovine somatotropin (7) Buparvaquone (8) Calf serum/foetal calf serum (9) Dulbecco phosphate buffer saline medium (10) Flavophospholipol (11) Follicular stimulating hormone (FSH) (12) Gonadotropin releasing hormone (GnRH) (13) Halofuginone bromide (14) Human chorionic gonadotropin hormone (HCG) (15) Ivermectin (16) Lasolacid sodium (17) Leutinising hormone (18) Lincomycin powder (19) Lincospectin (bulk drug lincomycin spectinomycin 1 : 2) (20) Maduramicin ammonium/haduramycin ammonium (21) Monensin granulated (coban premix) (22) Ovaprim [gonadotropin releasing hormones] (GnRH) analogue with domperidone (23) Pleuromutilin (24) Pregnant mare serum (PMSG) (25) Prostaglandin F2 alpha (26) Prostaglandin (27) Prostaglandins (PgF2 alpha) (28) Robenidin HCL (29) Tiamulin hydrogen Fumarate (30) Tiamulin hydrochloride (31) Tylan premix (32) Tylosin tartarate/tylosin phosphate (33) Vaccine for fish (34) Virginiamycin (35) 4-hexyl resorcinol LIST 2 (See S. No. 50 and 289 of the Table) (1) 32 P Sodium Phosphate (2) Flucytosin (3) 5-Fluorouracil (4) 6-Isoguanine (5) Aclarubicin, (6) Dactinomycin (7) Doxorubicin, (8) Agglutinating Sera (9) Allopurinol, (10) Ambenonium Chloride, (11) Amikacin, (12) Amino - glutothemide, (13) Amiodarone, (14) Amiphenazole, (15) Amphotericin-B, (16) Amrinone, (17) Amsacrine, (18) Amy lobarbitone Sodium, (19) Anti-Diphtheria Normal Human Immunoglobulin, (20) Anti Haeomophilic Factor concentrate (VIII and IX), (21) Anti-Human Lymophocyte Immunoglobulin IV (22) Anti-human thymocyte immunoglobulin IV, (23) Anti-Pertussis Normal Human Immunoglobulin (24) Anti-Plague serum, (25) Anti-Pseudomonas Normal Human Immunoglobulin, (26) Anti-Rabies Normal Human Immunoglobulin (27) Aprotinin, (28) Atracurium besylate, (29) Azathioprine, (30) Baclofen, (31) Beclamide, (33) Bleomycin, (34) Blood group sera, (35) Burn therapy dressing soaked in gel, (36) Bovine Thrombin for in vitro test for diagnosis in Haemorrhagic disorders, (37) Bovine Albumin, (38) Broxuridine, (39) Bretyleum Tossylate, (40) Busulphan, (41) Calcium Disodium Edetate, (42) Carbidopa with Levodopa, (43) Carmustine, (44) Cefoperazone, (45) Ceftizoxime, (46) Cesium Tubes, (47) Chenodeoxycholic Acid (48) Chlorambucil, (49) Chlormerdrin 197 Hg., (50) Cholestyramine, (51) Christmas Factor Concentrate (Coagulation factor IX prothrombin complex concentrate), (52) Chorionic Gonadotrophin, (53) Cobalt-60, (54) Clindamycin, (55) Colistin, (56) Carboquone, (57) Corticotrophin, (58) Cyclocytidine, (59) Cyclophosphamide, (60) Cyclosporine, (61) Cyanamide, (62) Dacarbazine, (63) Daunomycin, (64) Daunorubicin, (65) Desmopressin, (66) Desferrioxamine, (67) Diagnostic Agent for Detection of Hepatitis B Antigen, (68) Diagnostic kits for detection of HIV antibodies, (69) Diphtheria Antitoxin sera, (70) Dimercaprol, (71) Diazoxide, (72) Dobutamine (73) Dispyramide Phosphate, (74) Edrophonium, (75) Dopamine, (76) Enzyme linked Immunoabsorbent Assay kits [ELISA KITS], (77)Epirubicin, (78) Fibrinogen, (79) Floxuridine, (80) Follicle Stimulating, (81) Fospestorol, (82) Gallium Citrate, (83) Gasgangrene Anti-Toxin Serum, (84) Glucagon, (85) Heptamine, (86) Hepatitis B Immunoglobulin (87) Hexamethylmelamine, (88) Histoglobulin, (89) Hydralazine, (90) Hydroxyurea, (91) Idarubicine, (92) Idoxuridine, (93) Ifosfamide, (94) Isoprenaline, (95) Immunosassay kit for blood Fibrinogen degradation product for direct estimation for diagnostic test in D.I.C., (96) Inactivated rabies vaccine (Human diploid cell) (97) Inactivated rabies vaccine [Vero-cell], (98) (a) Indium (III) in bleomycin (b) Indium 113 Sterile generator and elution accessories (c) Indium 113 in brain scanning kit (d) Indium113 in liver scanning kit, (99) Interferon alpha-2b/interferon alpha-2a/Interferon NL/Interferon alpha NL (LNS), (100) Intravenous amino acids, (101) Intravenous Fat Emulsion, (102) Iopamidol, (103) Iohexol, (104) Ketamine, (105) Isoflurane, (106) Selenium-75, (107) Asparaginase, (108) Calcium folinate, (109) Lactulose, (110) Levodopa with benserazine, (111) Levodopa (L-Dopa), (112) Mannitol, (113) Lomustine, (114) Meningococcoal A and C combined vaccine with diluant solvent, (115) Melphalan, (116) Mercaptopurine, (117) Mesna, (118) Methisazone, (119) Methicillin, (120) Methoxy isobutyl Isonitrile, (121) Methotrexate, (122) Methyl prednisolone, (123) Methoxyflurane, (124) Metrizamide Inj with diluant, (125) Metraminol, (126) Mithramycin, (127) Nimustine, (128) Mitotane, (129) Mitomycin, (130) MMR (Measles, mumps and rubella) vaccine, (131) Latamoxef, (132) Monocomponent insulins, (133) Nalorphine, (134) Mustin Hydrochloride, (135) Netilmicin, (136) Naloxone, (137) Nitroglycerine, (138) Normal human plasma, (139) Normal human immunoglobulin, (140) Nuclear magnetic resonance contrast agent, (141) Normal human serum Albumin, (142) Penicillamine, (143) Pancuronium Bromide, (144) Pentamidine, (145) Penicillinase, (146) Peplomycin, (147) Pilocarpine, (148) Podopyllotoxin, (149) Piperacillin, (150) Poliomyelitis vaccine (inactivated and live), (151) Laureth 9, (152) Polymyxin B, (153) Polyestradiol, (154) Potassium Aminobenzoate, (155) Porcine Insulin Zinc Suspension, (156) Praziquantel, (157) Pralidoxime, (158) Prednimustine, (159) Prazosin, (160) Porcine and Bovine insulin, (161) Procarbazine, (162) Purified Chick Embryo Cell Rabies Vaccine, (163) Protamine, (164) Pyridostigmine, (165) Pyridinol Carbamate, (166) Radio-immunoassay kit for hormones (T3, T4 TSH Insulin, Glucogen, Growth Hormone, Cortisol, L.H., FSH and Digoxin, (167) Quinidine, (168) Radioisotope TI 201, (169) Tribavarin, (170) Septopal beads and chains, (171) Sodium Arsenate, (172) Sodium Cromoglycate spincaps and cartridges, (173) Sodium Hyalauronate sterile 1% and 1.4% solution, (174) Solution containing Human Follicle Stimulating and Luteinising hormones, (175) Solution of Nucleotides and Nucliosides, (176) Somatostatin, (177) Somatropin, (178) Specific Desensitizing Vaccine, (179) Sterile Absorbable Haemostat for control of surgical vessel bleeding, (180) Streptokinase and Streptodomase preparations, (181) Strontium Chloride (85 Sr.), (182) Strontium SR-89 Chloride, (183) Suxamethonium Chloride, (184) Testolactone, (185) Technitium-99M, (186) Thioguanine, (187) Thallium 201, (188) Ticarcillin, (189) Tobramycin, (190) Tissue Plasminogen Activator, (191) Tranexamic Acid, (192) Tocainide, (193) Tri-iodothyronine, (194) Triethylene Tetramine, (195) Triethylene Thiophosphoramide, (196) Trofosfamide (197) Tubocurarine (198) Urokinase, (199) Ursodeoxycholic Acid, (200) Vancomycin, (201)Vasopressin, (202) Vecuronium Bromide, (203) Vindesin Sulphate, (204) X-ray diagnostic agents, the following : - (i) Propylidone (ii) Ethyl iodophenylun decylate (iii) Iodipammide methyl glucamine (iv) Lipidoll utra fluid (v) Patent blue, (205) Anti-D Immunoglobulin, (206) Aurothiomalate Sodium, (207) Botulinum Toxin Tyre 'A', (208) Triptorelin, (209) D.K. line 100% purified perflurodicalin liquid, (210) Filgrastim/Molgramostim (G-CSF/GM-CSF), (211) Flecainide, (212) Foetal Bovine Serum (FBS), (213) Gadolinium DTPA Dimeglumine, (214) HTLV - 1 Western Blot Kits, (215) Tetanus Immunoglobin, (216) BCG vaccine, Iopromide, Iotrolan, (217) Legionella Pneumophilis IF kits, (218) Muromonab - CD 3, (219) Octreotide, (220) Typhoid vaccines: (i) VI Antigen of Salmonella Typhi (ii) Ty 21a cells and attenuated non-pathogenic strains of S. Typhi, (221) (a) Rabbit brains thromboplastin for PT test (b) Reagent for PT tests (c) Human Thrombin for TT tests, (222) Pneumocystis carinii IF kits, (223) Puenoxytelzamins, (224) Rabies immunoglobulin of equine origin, (225) Thrombokinase, (226) Teniposide, (227) Vidarabine, (228) Iscador, CLIA diagnostic kits, (229) Lamivudine, (230) Zalcitabine, (231) Saquinavir, (232) Zidovudine,(233) Ritonavir, (234) Amifostine, (235) Gemcitabine, (236) Goserlin Acetate, (237) Teicoplanin, (238) Recuronium Bromide, (239) Abeciximab, (240) Disodium Pamidronate LIST 3(A) (See S. No. 110 of the Table) PARTS, CONSUMABLES AND OTHER ITEMS (1) Leather, plastic, rubber coco board, masonite board or plastic board, heels with or without rubber/PVC top lift (2) Toe caps and counters for leather footwear (3) Insoles or midsoles and sheets therefor (4) Welts made from leather or plastic (5) Shoes eyelets (6) Felt sleeves (7) Heel tips (8) Unit soles with or without heels (9) Stamping wheels (10) Patterns for leather footwear (11) Plastic or nylon tipped hammers (12) Plastic, PVC or nylon lasts with or without steel hinges (13) Clicking boards for leather machinery (14) Harness needles for hand sewing pre-punched cards (15) Pre-punched cards (16) Leather designers kit, namely, designers knife, shoe measuring tape, designers tape and satra vacuum former (17) Industrial sewing machine needles with leather point (18) Bell skiving knives (19) Band knife for splitting machines (20) Cutting and clicking dies (21) Aluminium shoe forms with or without heating elements (22) Silver marking pencils or pens and refills thereof (23) Polyurethane films and polyurethane foils of thickness 0.3 mm and above but not above 0.7 mm, for finishing leather (24) Non-woven material coated with thermoplastic for the manufacture of toe-counters (25) Cellulose board insole sheets (26) Leather board made from leather scrap for the manufacture of counters and stiffeners (27) Masonite or coco board (28) Sole leather bends (29) Styrene butadiene styrene oilbound copolymer for the manufacture of soles (30) Rubber, resin rubber, EVA or crepe sheets for soles and heels (31) Felt, all types (32) Sulphonated/sulphated/oxidised/chlorinated cod oil or sulphonated/ sulphated/oxidised/chlorinated neats foot oil or sulphonated/oxidised/ chlorinated fish oil or mixtures thereof (33) Pigment finishes for leather (34) Aluminium tanning agents, oil tanning agents, zirconium tanning agents, basic chrome sulphate (35) Polishes, creams and similar preparations for footwear or leather (36) Casein, resin (other than acrylic resin) and polyurethane binders (37) Slip agents of Heading No. 32.08 (38) Lacquer and lacquer emulsion of Heading No. 32.08 (39) Preservatives of Heading No. 29.42 (40) Synthetic fat liquors (with or without hydrocarbons), non-ionic fat liquors, and mixtures thereof (41) Fatty oil or pull up oil (42) Syntans (43) Solvent soluble dye Mordant Brown of Hue No. 79 (44) Solvent soluble dye Acid Brown of Hue Nos. 75, 76, 97, 98, 126, 127, 144, 159, 160, 161, 162, 165, 188, 191, 194, 196, 214, 237, 256, 265, 268, 270, 282, 290, 298, 303, 310, 321, 322, 349, 355, 358, 359, 360, 362, 365, 373, 387, 396, 402, 422, 425, 432, 433, 434 or 447 (45) Solvent soluble dye Acid Black of Hue Nos. 50, 52, 71, 76, 82, 83, 84, 85, 115, 132, 169, 172, 194, 209, 210, 213, 215, 221 or 234 (46) Solvent soluble dye Acid Blue of Hue Nos. 115, 133, 134, 193, 254, 260, 312 or 349 (47) Solvent soluble dye Direct Blue of Hue No. 59 or 78 (48) Solvent soluble dye Acid Red of Hue Nos. 97, 119, 120, 167, 231, 234, 248, 283, 324, 362, 399, 404, 407 or 423 (49) Solvent soluble dye Direct Red of Hue Nos. 23, 99, 111 or 239 (50) Solvent soluble dye Acid Green of Hue Nos. 20, 26, 68 or 111 (51) Solvent soluble dye Acid Orange of Hue Nos. 51, 66, 78, 80, 95, 162, 168 or 170 (52) Solvent soluble dye Acid Violet of Hue Nos. 54, 80 or 90 (53) Solvent soluble dye Acid Yellow of Hue Nos. 96, 99, 194, 204, 220 or 243 (54) Solvent soluble dye Direct Orange of Hue No. 61 (55) Solvent soluble dye Direct Brown of Hue No. 94 or 209 (56) Solvent soluble dye Direct Violet of Hue No. 46 (57) Solvent soluble dye Direct Black of Hue No. 120 or 155 and (58) Solvent soluble dye Direct Green of Hue No. 66 LIST 3(B) (See S.No. 110 of the Table) OTHER PARTS, CONSUMABLES AND ITEMS (1) Formulations containing either Thio Cyano Methyl Thio Benzothiazole (TCMTP) or Para Chloro Meta Cresol (PCMC) or both; Self basifying chrome tanning agents (2) Penetrators (3) Stamping foil in strips of width not exceeding 6 inches (4) Eyelets, hooks, rings, all type locks including magnetic locks, push clips, metal handle, key chain holder, corners, puller, fancy caps, clamps, decorative rivets, decorative fittings and logos, handle holders, studs, sockets, hinges, buckels, metal frames, tacks and washers (5) Buttons, press-fasteners and snap-fasteners falling under Heading No. 96.06 (6) Magnetic buttons (7) Abrasive sheets falling under sub-heading No. 6805.20 (8) Shanks and welts falling under Heading Nos. 73.26 and 64.06 respectively (9) The following chemicals for the manufacture of leather chemicals : (I) Phenol (II) Naphthalene (III) Paraffin wax (IV) Dicarboxylic acid and mixtures thereof (V) Acrylic acid/Methacrylic acid (VI) Synthetic substitute for Sperm oil (VII) Synthetic substitute for Neats foot oil (VIII) Alcohol mixture of C 9 , C 10 , C 11 (IX) Thio cyano methyl thio benzothiazole (TCMTB) (X) Para chloro meta cresol (PCMC) (XI) Lactic Casein (XII) Titanium Dioxide (XIII) Iron Oxide (XIV) Cellulose Acetate Butyrate (XV) Methoxydihydropyrane (XVI) Dioxy Diphenyl Sulphone (XVII) Dehydro Thio Paratoludine (XVIII) Nitro Amino Phenol Sulphonic Acid (XIX) Dicyandiamide (XX) Silicone oil in solvent or water (XXI) Sodium Picramate (XXII) Methyl Pyrozollic Acid (XXIII) Itaconic Acid (XXIV) 1-Methoxy Propanol-2 (XXV) Ethyl Acetate (XXVI) Butyl Acetate (XXVII) 2 Ethyl Hexyl Acetate (XXVIII) Emulsifiers (XXIX) Ethyl Glycol (XXX) Butyl Glycol. LIST 4 (See S.No. 133 of the Table) (1) Cold drawn free cutting brass rods of diameter 0.4 mm. to 14 mm. (2) Leaded brass strips and sheets in coils or flats of thickness upto 4 mm. and width upto 40 mm. (3) Leaded brass strips in coils or in straight length of thickness 0.01 mm to 0.05 mm. and width upto 50 mm. (4) Leaded naval brass strips in coils of thickness 0.12 mm. to 3 mm. and width 8 mm. to 30 mm. (5) Nickel silver brass strips/flats of thickness 0.10 mm to 1.50 mm. and width 6 mm. to 55 mm. (6) Phosphor bronze strips of thickness 0.02 mm. to 0.15 mm. and width from 15 mm. to 30 mm. (7) Phosphor bronze rods of diameter 0.5 mm. to 2 mm. and length upto 3000 mm. (8) Brass pipes of outer diameter 0.45 mm. to 1.9 mm. (9) German silver rods of diameter 5 mm. to 10 mm. (10) Horological steel rods (leaded) bright drawn or centreless ground finish in perfectly straightened lengths of diameter 0.3 mm. to 6 mm. and length upto 3 metres (11) Horological steel strips cold rolled with accurate flatness and bright regular edges of thickness 0.01 mm. to 1 mm. and width 0.2 mm. to 30 mm. (12) Super alloy strips of thickness upto 0.65 mm. and width upto 30 mm. (13) Synthetic rubby for watch jewels (14) Spring steel strips type DIN 2075 Kl 2 of thickness 0.01 mm. to 0.5 mm. and width 0.2 mm. to 0.5 mm. (15) Stainless steel strips of thickness 0.01 mm. to 1.5 mm. and width upto 45 mm. (16) Stainless steel wire in coils for click spring and setting lever spring of diameter 0.1 mm. to 1.5 mm. (17) Brass flats of thickness upto 6.5 mm., width upto 50 mm. and length upto 2000 mm. (18) Brass rods of diameter upto 36.5 mm. (19) Nickel silver rods of diameter upto 3 mm. and length upto 3000 mm. (20) Leaded brass pipes of outer diameter 18 mm. to 35 mm., and inner diameter 10 mm. to 30 mm. (21) Stainless steel flats, cold rolled or hot rolled for manufacture of watch case bezels of thickness 2.5 mm. to 10 mm. and width upto 55 mm. (22) Cold rolled stainless steel strips for the manufacture of watch back covers and bezel rings of thickness 0.4 mm. to 3.0 mm. for back cover and 1.2 mm. to 5.0 mm. for bezel rings and width upto 55 mm. for both (23) Unleaded brass strips of thickness 0.07 mm. to 1.5 mm. and width 5 mm. to 50 mm. (24) Phosphor Bronze strips in coils of thickness 0.125 mm. and width 28 mm. (25) Lacquers and varnishes (26) Brass circles of thickness 0.4 mm. to 0.5 mm. and diameter 24 mm. to 50 mm. (27) Brass for making appliques/indexes/logos/windows with 2 feet, of thickness 0.3 mm. to 2 mm. and width 1 mm. to 4 mm. (28) Nickel silver circles of thickness 0.5 mm. and below and diameter 24 mm. to 50 mm. (29) Tritium activated zinc sulphide (30) Luminous compounds for dials (31) Silver solder core wire for dial legs in straight length or in coil or diameter 0.4 mm. to 1 mm. (32) German silver strips of thickness 0.1 mm. to 1 mm. and width 5 mm. to 10 mm. (33) Free cutting quality stainless steel rods of diameter upto 6 mm. and length upto 3000 mm. (34) Polyamide strips of thickness upto 0.10 mm. and width upto 15 mm. (35) Copper berillium strips in coils of thickness upto 0.35 mm. and width upto 25 mm. (36) Polished steel strips in coils of thickness 0.05 mm. to 0.5 mm. and width upto 15 mm. (37) Leaded brass rods of diameter 0.5 mm. to 20 mm. and length upto 3000 mm. (38) Nickel silver strips of thickness upto 0.1 mm. and width upto 50 mm. (39) Titanium copper strips in coils/cut lengths of thickness 0.18 mm. to 0.20 mm. and width 15 mm. to 20 mm. (40) Aluminium alloy strips whether or not in coil of thickness upto 0.55 mm. and width upto 35 mm. (41) Leaded beryllium copper rods of diameter 0.5 mm. to 20 mm. and length upto 3000 mm. (42) Stainless steel pipes of outer diameter 1.8 mm., inner diameter 1.54 mm. and length upto 3000 mm. (43) Mineral glass sheets (44) Copper wire of diameter 1 mm. to 2.5 mm. for making logos/indexes/applique, for watch dials (45) Crystal glass chatin (cast glass profiles, edge worked and enamelled with reflecting layer) for watch dials (46) Unleaded brass sheet of thickness 0.10 mm. to 1.5 mm., width upto 250 mm. and length upto 1250 mm. (47) Titanium strips of thickness 0.01 mm. to 1.5 mm. and width upto 45 mm. (48) Titanium flats of thickness upto 7 mm. and width upto 55 mm. (49) Titanium rods of diameter upto 20 mm. and length upto 3000 mm. LIST 5 (See S. No. 136 of the Table) (i) Brick press with accessories like moulds, pallets, stackers, clamping devices or the like for fly ash sandlime brick capacity 3000-5000 bricks/hr. up and down stroke pressure 300-400 kgs./sqm. (ii) Flyash block making machine of capacity 1000-2000 block/hr. with vibrators, mixer and accessories like moulds, pallets, stackers, clamping devices or the like (iii) mixer with bottom valve and outlet pipes for cellular concrete (iv) Moulding equipment, cross cutting plant and longitudinal cutting plant, for cellular concrete (v) Centering bridge for moulds (vi) Moving grate sintering strand for light weight flyash cellular concrete (vii) Purification plant including diaphragm, pump, vacuum filter, gas scrubber, for phosphogypsum (viii) Flash calciner (ix) centrifuge for calcination equipment (x) Partition panel plant (xi) Moulds for phosphogypsum (xii) Drier-cum-calciner (xiii) Edge Runner Mill (for crushing and kneading of Clay and Flyash Mixture output 15 to 40 tons per hour depending on the perforation of the grinding plates) (xiv) Pan Mixer (output 25 tons per hour) (xv) Double Shaft Mixer (for mixing of the material consisting of Clay and Flyash) (xvi) Vacuum Worm Press Extrusion machine (capacity of the press upto 36 tons of material per hour) (xvii) Mouth piece (for the above vacuum Worm Press with dimensions corresponding to the required type of Bricks or Blocks which will be produced) (xviii) Automatic Equipment (for cutting and handling of bricks between the pressing shop and dryers) (xix) Plant and machinery required for making hollow-core roofing/flooring units (xx) Large-size plants for manufacturing of hollow and solid concrete blocks for walling (xxi) Mechanised hydraulically operated Tunnel Form of Wall forms, Slabforms, Column forms (xxii) Large-size vibrating-beds with integrated curing and wire-tensioning arrangements (xxiii) Vibrating-distributors for speedy production of prefab building parts (xxiv) Hydraulic presses for manufacturing pavement blocks (xxv) Hydraulic heavy duty press for making Hollow and Solid Concrete blocks (xxvi) Foam Generating Equipment, spiral pumps and Foaming compound for light weight cellular concrete (xxvii) Densified wood fibres plates for door shutters. LIST 6 (See S. No. 138 of the Table) (1) Air blast dust removing machine (2) All types of staking machines except slocum (slow combing process) (3) Automatic Drying machine (4) Automatic Lacing machine (5) Automatic Leather Perforating and/or Punching machine (6) Automatic Lock-Stitching Cylinder Bed Bartacker (7) Automatic machine to control, to slant and to glue leather straps (8) Automatic Milling machine (9) Automatic Milling-Boring Machine (10) Automatic or semi-automatic hydraulic press (750 tonnes or more) (11) Automatic padding machine (12) Automatic Spraying machine (13) Automatic Tacks - Reinforce machine (14) Automatic Work Unit for assembling the complete Insole (15) Back Part Moulding machine (16) Band-saw with or without Filter (17) Band-knife Splitting machine (18) Belt Punching and cutting machine (19) Bobbin machine with counter (20) Boot log ironing machine (21) Bottom Leather Grain Crack Tester (22) Bottom roughing and/or scouring machine (23) Box Stamping machine (24) Buckle Stappling machine (25) Button Hole (Eyelets end) machine (26) Button Sewing machine (27) Button stitch/Sewing machine (28) Cementing machine (29) Cementing machine and cementing gun (30) Chain Slotting machine (31) Channel Closing machine (32) Channelling and Grooving machine (33) Clicking Board levelling machine (34) Clicking machine (35) Clicking Machine Hydraulic (Bottom) (36) Coloriemeter (37) Column Boring machine (38) Computerised Sewing Machine (39) Computerised Skiving machine (40) Conveyor system (41) Counter Cementing Machine (42) Counter Moulding machine (43) Counter Tightening machine (44) Coupling and edge pre-trimming machine (45) Crimping machine (46) Crumpling and embossing machine (47) Curtain coating machine (48) Cylinder Bed Sewing machine (49) Die Bending machine (50) Double Band Cleaning machine (51) Dust removing machine-pneumatic/hydraulic (52) Dyeing machine (53) Edge buffing machine (54) Edge Inking machine (55) Edge Pre-Trimming machine (56) Edge Setting machine (57) Edge Trimming machine (58) Elastic inserting machine on variety of garments (59) Electrical machine for cutting and slanting straps (60) Electro pneumatic weaving machine for leather (61) Electronic skin assessor (62) Embossing plates for press for leather printing (63) Engraved rollers for Press for leather printing (64) Evening and Roughing machine for Soles and Insolses (65) Fibre Board Flexing machine (66) Fine Turn machines for Lasts (67) Finish Sheet Resistance Tester (68) Finishing Machine for Lasts (69) Fixed Head/Travailing Head Clicking Cutting machine (70) Flat Bed Double Needle Sewing machine (71) Flat Bed Single Needle Industrial Sewing machine with or without trimmer (72) Folding machine for brief cases and other leather products (73) Folding machine for sides for Brief Case (74) Forepart conditioning machine (75) Frame Fixing/Frame Folding machine (76) Fusing presses (77) Halogen and Adhesive Application machine (78) Hand Operated Press for Inserting Perforation Tubes and prickers (79) Heat Setting plant (80) Heat transfer press (81) Heel and Sole Brushing machine (82) Heel and Sole Buffing machine (83) Heel Attaching machine (84) Heel Breast Cementing machine (85) Heel breast roughing machine (86) Heel Breasting machine (87) Heel Building machine (88) Heel Covering machine (89) Heel Molder Flanger (90) Heel Nailing machine (91) Heel profiling machine (92) Heel seat and side lasting machines (93) Heel Seat Cement Lasting machine (94) Heel Trimming/pretrimming/Cupping or combined machine (95) High Speed Corner Stitching machine (96) Hole punching machine (97) Hot Melt Applicators (98) Humidifier for Uppers (99) Hydraulic/Pneumatic sammying and/or setting machine (100) Hydraulic automatic plating ironing machine (101) Hydraulic Bending machine (102) Hydraulic Fleshing machine (103) Hydraulic Ironing and Embossing Press (104) Hydraulic Scudding machine (105) Hydraulic Setting machine (106) Hydraulic Shaving machine (107) Hydraulic Shearing machine (108) Hydraulic Splitting machine (109) Hydraulic Sulphide applicator (110) Injection Moulding of PVC/TPR Soles, Inserts and Half Soles (111) Injection Moulding press to produce plastic shoe lasts (112) Insole Attaching machine (113) Insole Backpart Stiffener Tester (114) Insole Bevelling machine (115) Insole Covering machine (116) Insole moulding machine (117) Ironing and Conditioning machine (118) Kamborian Lasting machine (119) Knife Grinding machine (120) Knife making equipment for cold steel and forged steel (121) Label stitching machine (122) Last Turning machine (123) Lastometer (124) Leather buffing machine (125) Leather cover Cutting machine for Heels (126) Leather Polishing machine (127) Leather Rolling machine (128) Lining roughing machine (129) Lining Trimming machine (130) Loop closing machine (131) Loose/Nailing machine (132) Manual loop cutter (133) Mckay Stitching machine (134) Milling machine for shoe Uppers (135) Moccasin Lining Trimming machine (136) Moccasin Performing machine (137) Motorised hides and skins stamping machine (138) Moulds for rubber sole direct vulcanising press and PVC direct injection soling machine (139) Multiple Row Upper Chain Stitching machine i.e. 3 Rows and above (140) Three Needles for Small Arm Cylinder machine for multiple Row Stitching (141) Outsole Stitching machine (142) Paste drying unit (143) Pattern binding machine (144) pattern corner cutting and binding machine (145) Pattern Grading machine (146) Pattern making machine (147) Pattern Perforator (148) Pattern Plan (149) Pattern scanner (150) Pattern Scanning machine (151) Piping machine for trimming and embelishment fixing machine (152) Plan Computer Controlled Nesting System (153) Pneumatic Broaching machine (154) Pneumatic control moulder machine for buckles (155) Pneumatic fusing machine for ironing fusible interlining (156) Polishing machine (157) Polyshanking machine (158) Polyurethane/PVC/TPR Sole Insole, Heel, Heel Tip Injection Moulding machine (single or multiple station) (159) Pore part lasting machine (160) Post Bed Double Needle Sewing machine (161) Post Bed Single Needle Sewing machine, (162) Post Bed Single Needle under Edge Trimming (163) Pounding or beating or ironing machine or combination of such machines (164) Pre-lasting conditioner (165) Preparing and polishing machine (166) Pulling Over and Cement Lasting machine (167) Pulling Over Machine (168) Punches for model room (169) Punches of all varieties (170) Punching and/or eyeletting machine (171) PVC/PU direct injection soling machine (DPI construction) (172) Quilting machine (173) Raised Cord Sewing machine (174) Reactivating Plant for Shoe and Soles (175) Recessing and Roughing Soles machine (176) Recessing Welt machine (177) Rotary Collection Unit (178) Rotary Pigment Coating machine (179) Rotary Printing machine (180) Rough Turn machine for lasts (181) Roughing machine for Plastic Blocks (182) Roughing machinery for upper or soles or insoles (183) Rubber sole direct vulcanising press (DVP construction) (184) Satra Plan and Knife search (185) Scissors Cutting machine for plate (186) Scouring and Blending machine (187) Screwing machine (188) Seam Ironing machine (189) Sectioning machine (190) Sewing machine Cylinder Bed (191) Sewing Machine for Ruffled Work and Genuine Mocassin (192) Sewing Machine Zig Zag Flat Bed (193) Shank/Sole/Counter reducing machine (194) Shank Rivetting machine (195) Shears for cutting pattern (196) Shears for Iron Bars (197) Side lasting machine (198) Sidewall Roughing machine (199) Skiving machine (200) Slike Fastener Fatigue Tester (201) Snap fasteners fixing machine with or without dies therefor (202) Sole/Heel/Seat Roughing machine (203) Sole Edge Recessing/Shapping machine (204) Sole Levelling machine (205) Sole Stamping/Embossing machine (206) Soling Materials Abrasion machine (207) Spiral Cutting machine/Cutting Press (208) Spray Booths (209) Stamping machine for Upper/Lining/Socks (210) Steam Toe Press (211) Stich Marking machine (212) Strap/Strip Cutting machine (213) Strap Folding machine (214) Stretching and drying machine with or without conveyor and toggles (215) String Lasting machine (216) Strobel type stitching machine (217) Studs Attaching machine (218) Suit Case Stitching machine (219) Tack heel seat lasting machine (220) Tack Lasting machine (221) Tack Side lasting machine (222) Tanning and colouring drums (223) Tapping and seam rubbing machine (224) Testing Equipments, namely :- Flexometer/Upper material flexing machine, Tensometer/Lastometer, Permeometer/Upper leather water proofness tester, Penetrometer/Bottom Leather water penetration machine, Finish rub fastness tester, Upper leather abrasion resistance machine, Dome plasticity apparatus, Finish fleat resistance tester, Adhesion of finish tester, Leather shrinkage temperature determination apparatus, Wrinklometer, Bottom Leather grain crack tester, Electronic moisture meter, Dyeing and fumbling machine for laboratory, fibre board flexing machine, State of cure apparatus, Ross Flexing machines, Soling materials abrasion machine, Heel fatigue tester, Heel impact tester, Centilever tensiometer, Viewing box for assessing visible damage, Slide fastener fatigue tester, Insole backparts stiffness tester, shoe flexing machine, Break/pipness scale, Sole Adhesion tester, Safety Footwear impact tester, Rapid tear tester, Needle holding jig, Shoe lace adhesion machine (225) Thermo cementing and folding machine (226) Toe Cap Applicator Thermoplastic (227) Top Lift Slugging machine (228) Transfer Arm (229) Trimming/milling machine with or without polishing device (230) Twin Needle, needle feedlock stitch sewing machine (231) Twin Sole Attaching machine (232) Two Needle Lock Stitching machine (233) Unlasting machine (234) Upper Cementing machine (235) Upper Edge Inking machine (236) Upper Embossing machine (237) Upper Folding machine (238) Upper Forming machine (239) Upper Perforating machine (240) Upper Reinforcing machine (241) Upper Seam Rubbing/Beating machine (242) Vacuum Drying machine (243) Vacuum forming machine for last with vacuum pump (244) Vice for holding pattern (245) Vision Lasting System for Toe Lasting machine (246) Vulcanizing Press (247) Welt (Rand) Attaching machine (248) Aquamix for use in Tanning industry (249) Prodomix for use in Tanning industry (250) Microtan / Computan for use in Tanning industry (251) Pneumatic press for engraving and marking (252) Pneumatic staple gun for stapling insoles, heels and uppers (253) Stapling machine for lows to upper on leather shoes (254) Lighting assessment cabinet (for checking colour under different light conditions) (255) CAD/CAM equipment for shoe designing and pattern engineering including software (256) Bistep cutting machine (257) Spiking machine (258) Airhood with grinder (259) Sock liner press (260) Box folding machine (261) Outsole plates (262) Dust collector systems (263) Shoe box making machine (264) Splitting machine (Fitted with electronic and computer devices, etc.) (265) Moulds for leather footwear LIST 7 (See S.No. 148 of the Table) (1) Connecting rod assembly (2) Crank 1, 2 and 3 (3) Piston ring set (4) Coil ignition (5) Ignition coil assembly (6) Pin piston (7) Rod connecting (8) Pin crank (9) Gear adjustment (10) Lever tilt 2 (11) Handle gear shift (12) Carburettor assembly (13) Pinion (14) Shift can assembly (15) Lower casing assembly (16) Propeller assembly (17) Reed valve assembly (18) Crank shaft assembly (19) Fuel pump assembly (20) Cowling bottom LIST 8 (See S. No. 166 of the Table) (1) Heat Exchangers for steam sterilisation of soil in green house (2) Low draught horizontal axial fans with energy efficient motors (3) Fogging machines (4) Automatic shading system (5) Drip irrigation system for green house (6) Humidifiers (7) Kool-cel pad system for cooling (8) Ultra violet retardant fibre glass/plastic sheets (9) Flower grading machine LIST 9 (See S. No. 171 of the Table) (I) Kitchen Equipment : (1) Dough Kneading Machine (2) Dough Dividing Machine (3) Electric Egg Boiler (4) Band Saw Machine for cutting Meat - Fish Bones etc. (5) Meat cutting slicing Machine/mincing and grinding machines (capacity 300 kg per hour) (6) Meat tenderising machine (7) Silver burnishing and polishing machine - small and large table ware (8) Commercial heavy duty can opener (motorised) (9) Smoker (10) Salad dryer (11) Vertical chopper (12) Ice flakers (13) Waffle Irons (14) Bread buttering machine (15) Vertical cutter and mixer (16) Cold beverage dispenser as manufactured by jet spray (17) Planetary mixer - heavy duty (18) Dough sheeter and cutter (19) Sandwich unit (20) Butter portioning machine (21) Automatic glass washing machine (22) Chinese range with steamers (23) Vacuum packing machine (24) Glass dispenser (25) Vegetable preparation and washing machine (26) Conveyor table (27) Bread - Slicing Machine (28) Roll-in-Refrigeration (Absorption type) or Mini Bars (29) Baking ovens - gas fired (30) Ice cubes machines over 1000 lbs. capacity (31) Potato peelers (32) Potato chipper (33) Coffee machine (34) Dish washing machine (35) Glass washing machine (36) Luckon hot plate (37) Plate dispenser (38) Toaster - Conveyor type (39) Tilting frying table/pans (40) Tilting boiling pan (41) Croissant machine (42) Deck oven, Pizza oven, Convection oven and Rotating ovens, for baking (43) Microwave ovens (44) Banquet Trolleys (Refrigerated) (45) Cocktail mixer/beverage mixer (46) Juice dispenser (47) Walk - in Coolers and Freezers (48) Gas Ranges with ovens/flame failure device (49) High pressure hot water cleaning jets (50) Puree machines (51) Deep fat frier with thermostatic control (gas operated) (52) Deep fat frier with thermostatic control (electrically operated) (53) Vegetable cutting/dicing machine (54) Energy saving steam cooker (double / quadruple type) (55) Hamburger machine, pastry rollers and noodle makers (56) Chocolate coating units (57) Pastamatic machines (58) Cold cut Slicer (59) Sausage making machine (60) Waste food disposal machine (61) Flambe trolley (62) Vegetable steam cooker (63) Draught beer dispensing unit (64) Chinese Banquet Silverware (65) Infra Grill (66) Heavy duty salamander (Gas / Electrical) (67) Blast Freezer. II. Health Club Equipment : (68) Rowing machine (69) Orbital massagers (70) Abdominal board (71) Steam bath (72) Jogomatic motorised treadmill (73) Butter-fly machine (74) Slendertone shinning equipment (75) MSA Oxygen administrator complete with cylinder / face mask (76) Power Jog machine. III. Laundry Equipment : (77) Dry cleaning presses (78) Extractors - 65 lbs. (79) Washer extractors (more than 100 lbs.) (80) Multi-purpose presses and utility presses (81) Garment finisher (82) Steam finishing boards (83) Marking machine (84) Water-spray gun and air vacuum system (85) Vacuum unit (86) Spotting Board (87) Tumblers (Hot oil operated/Steam heated) Dryer (Programmable) (88) Flat work iron (Hot oil operated / Steam heated) (89) Steam Cabinet unit (90) Shirt Unit (i.e. Sleeves, Body and Bossom Collar and Cut Press, etc.) (91) Upholstry processing machines viz., perfect pleet machine and curtain stretcher. (92) Puff iron (93) Lint Separator. IV. House Keeping Equipment : (94) Industrial type vacuum cleaner (95) Carpet shampooing machine (96) Drying machine (for carpets) (97) Breathing apparatus for fire fighting (98) Smoke / fire detectors sprinkler systems (99) Portable motorised deodoriser m/c. (100) Fogging machine for fire fighting (101) Papoosing machine (102) Pile lifter (103) Floor Polishing Machine, Floor Scrubbing Machines (104) Insect and Pest Killers V. Energy Saving Devices : (105) Tinted glass (106) Centrifugal Heat Reclaim Machine (107) Double Effect Absorption Machine for Air-conditioning VI. Miscellaneous Equipment : (108) Locks and keys with emergency/construction keys and emergency Escape doors (109) Gas Leak detector (110) Digital temperature gauge (111) 6600 Vol. 1100 volts high tension magger insulation testing kit (112) Magnetic locking devices sliding folding partition (113) Ultra high pressure washer with accessories for coil cleaning drain cleaning (114) Garbage incinerator with heat recovery unit (steam hot water) boiler with accessories (115) Sterasyl water filter for drinking water - or equipment using silver iodide (116) Submerged swimming pool cleaner (with motor of extra low voltage 40 volts) units with accessories - complete set (117) Fireman suit. (118) Electronic liquid level indicator (119) Hand Driers (120) Garbage compactizer (121) Bottle Crusher (122) Sauna Heaters and Saunas VII. Front Office Equipment : (123) Electric locking system (124) Key cutting machine (125) Computerised electronic vaults LIST 10 (See S. Nos. 180 and 181 of the Table) (1) Singeing machine (2) Yarn/Fabric mercerising machine (3) Continuous bleaching plant (4) Fabric reversing machine (5) Fabric dyeing machine complete with dye kitchen accessories (6) Wet fabric spreading and squeezing machine (7) Relax drum/conveyer drying machine (i) Drying range (ii) Float dryers (iii) Loop dryers (iv) Drum dryers (v) Jet dryers (vi) Rapid dryers (8) Compacting Machine (9) HTHP Hosiery yarn dyeing machine complete with dye kitchen and accessories (10) Soft package winders (dye package winders) (11) Yarn drying machine (12) Automatic dye weighing and dispensing machine (13) Volumetric/Gravimetric measurement liquid chemical station (14) Open width Tubular inspection machine (15) Lab dye preparation machine (16) Fastness testing equipment (17) Shrinkage testing equipment (18) Lab infra Red Drying Machine (19) Indigo dyeing range with/without sizing plant (20) Continuous weight reduction machinery through microwave technique (21) Computer colour matching equipment (22) High speed computer control padding mangle (23) Effluent treatment unit with biopaq reactor, activated sludge process, activated carbon, ultrafiltrations ozonisation facilities (24) Powder dot coating machine (25) Laser engraver (26) Kier decatising/continous decatising machine. (27) Combined contipress/decatising machine. (28) Effluent treatment unit with automatic sensing devices, automatic controlled chemical dozing dissolved air floatation (DAF), reverse osmosis, sludge dewatering, decanters, ultrafilters, vaccum filters to deliver water for reuse (29) Pre-shrinking range for flat and Knitted goods (30) Knit-tubular mercerising or bleaching-cum-mercerising machine (31) Auto flame controlled, width controlled singeing machine for flat and Knitted fabrics (32) Solvent scouring machine (33) Milling and scouring Machine (34) Shearing and Polishing Machine (35) Kier Decatising/Decatising Machine (36) Combined Contripress/Decatising machine (37) Blanket Fringing Machine (38) Raising/Brushing Machine (39) Hydraulic Flat Paper Press/Continuous Hydraulic Flat Paper Press/Rotary Press (40) Circular Knitting Machine (41) Industrial Sewing machine (42) Single needle bed drop feed lockstitch machine (43) Single needle lockstitch flat bed machine (44) Single needle flat bed drop feed lockstitch machine with speed more than 3500 stitches per minute (45) High speed twin needle feed lockstitch machine (46) High speed two needle lockstitch machine (47) Computerised multineedle lockstitch/chainstitch machine (48) Single needle lockstitch machine with built in trimmer (49) Blind stitch machine of various models (50) Single needle drop feed chainstitch machine (51) Two needle chainstitch or lockstitch machine (52) Chainstitch overedging machine (53) Two or three needle chainstitch machine (54) Two thread chainstitch for high speed seaming and banding operation with gear driven pulled feed/compount feed of speed 3500 stitches per minute and above. (55) Safety stitch machine. (56) Fully fashioned high speed knitting machine (57) Power driven flat bed knitting machine (58) Computerised flat bed knitting machine (59) Power operated flat lock/overlock machine (60) Linking machine (61) Loop making machine (62) Power driven socks knitting/gloves knitting machine. (63) Whole garment making machine (knitted) (64) Plain stitching machine with more than 3500 stitches per minute (65) Computerised plain stitching machine with more than 3500 stitches per minute (66) High speed needle feed two needle flat bed industrial sewing machine (67) Sewing machine zig-zig flat bed (68) High speed multiple needle sewing machine (69) Class feed of the arm industrial sewing machine (70) Bottom hole sewing machine (71) Bottom stitch sewing machine (72) Elastic inserting machine (on a variety of garments) (73) Belt attaching machine (74) Zip attaching machine (75) Bar tacking machine (76) Hemstitch machine (77) Smoking machine (78) Computerised pattern maker/pattern grading/marker machine (79) Power driven cloth cutting machine (80) Band knife cutting machine (81) Collar turning and blocking machine and cuff turning and blocking machine (82) Cuff press (83) New automatic collar turning machine (84) Automatic pocket weld sewing machine (85) Pocket creasing machine (86) Embroidery machine with 10 heads and above (87) Computerised embroidery machine (88) Computerised embroidery pattern making machine with plotter (89) Printing and curing machine (90) Quilting machine (91) Snap fasterns fixing machine and/or siwa thereof (92) Thread cleaning machine (93) Steam Press (94) Portable boiler for steam press (95) Steam cabinet (96) Vacuum table (97) Fusing press (98) Dry to Dry cleaning machine (99) Stain/spot removing machine/gun (100) Automatic 25-needle shirring/smoking machine (101) Shirt folding machine (102) Form finisher (103) Collar contour trimmer (104) Spreading machine (105) Shoulder pad attaching machine (106) Shrinkage controlling machines for knitting fabrics (107) Loopdrivers for tubular knitted fabrics (108) Mercerising machines for tubular knitted fabrics (109) Singeing machines for tubular fabrics (110) Pile cutting machines for knitted fabrics (111) Rotating edging machine for fabric rolls (112) Conveyors for garments (113) Garment calendering machine (114) Tie making machines (115) Labelling machines (116) Laying and cutting machines (117) Button and Rivet fixing machine and/or dies thereof (118) Auto fabric detwister (119) Weft straightening and calendering machine (120) Slit Opening Machine (121) Rotary/Flat bed screen printing machine (122) Curing/Polymerising machine (123) Continuous rope/open width washing machine (124) Lab yarn dyeing machine (125) Lab dyeing machine (126) Lab pressing machine (127) Automatic cone winding machine with yarn splicer and auto doffing system (128) High speed warping machine with yarn tensioning, pneumatic suction devices and accessories (129) Shuttleless looms (air jet, water jet, rapier and projectile) (130) Drawing in machine (131) Beam knotting machines (132) Computer aided design system (133) Fully automatic grey fabric inspection machines with roll to roll winding having microprocessor recorder (134) Auto control type humidification plant (135) Colour matching computer (136) Carding sets (137) Highspeed Intersecting Rotary/Chain/Pin Drawing Sets/Gill Boxes (138) Rectilinear Combs (139) Draw Frame/Roving Frame/Automatic Rubbing Frame/Bobbiners/Finishers (140) Ring frames from 60 MM Ring Dia and above (141) Ring Frames with Siro Spinning attachment/or Auto Doffers having maximum 75 MM Ring Dia (142) Shearing, polishing and cropping machines (143) Step cleaner (144) Flax hackling machine (145) Drawing machine for Flax (146) Roving machine for Flax (147) Wet ring frame for Flax (148) Auto winding machine for Flax (149) Continuous spinning machines for viscose filament yarn. (150) Digital electronic frequency inverters for spinning machines including control boards (151) Finishing oil metering pumps with relevant feed system (152) Metering gear pumps for viscose (153) Portable systems for injection of pigments for viscose dope complete with stirred vessel, metering pumps, instruments and control panel (154) Precious metal spinnerettes including distribution plates (prespinnerette) (155) Spin bath degassing plant by flash evaporation (156) Spin bath backwash filtration system with candle filters (157) Continuous dissolving and homogenising system for viscose preparation (158) Contidisk filters for viscose (159) Spinbath heat exchanger in graphite LIST 11 (See S. No. 182, 184 and 185 of the Table) (1) Land seismic survey equipment and accessories, requisite vehicles including those for carrying the equipment, seismic survey vessels, global positioning system and accessories, and other materials required for seismic work or other types of Geophysical and Geochemical surveys for onshore and offshore activities (2) All types of drilling rigs, jackup rigs, submersible rigs, semi-submersible rigs, drill ships, drilling barges, shot-hole drilling rigs, mobile rigs, workover rigs consisting of various equipment and other drilling equipment required for drilling operations, snubbing units, hydraulic workover units, self elevating workover platforms, Remote Operated Vessel (ROV) (3) Helicopters including assemblies/parts (4) All types of Marine vessels to support petroleum operations including work boats, barges, crew boats, tugs, anchor handling vessels, lay barges and supply boats; Marine ship equipment including Water Maker, DP system and Diving system (5) All types of equipment/units for specialised services like diving, cementing, logging, casing repair, production testing, simulation and mud services, oil field related lab equipment, reservoir engineering, geological equipment, directional drilling, Stimulation, Coil Tubing units, drill stem testing (DST), data acquisition and processing, solids control, fishing (as related to downhole retrieval in oil field operations), well control, blowout prevention (BOP), pipe inspection including Non-Destructive Testing, coring, gravel pack, well completion and workover for oil/gas wells including wireline and downhole equipment (6) All types of casing pipes, drill pipes, production tubing, pup joints, connections, coupling, kelly, cross overs and swages, Drive Pipes (7) All types of drilling bits, including nozzles, breakers and related tools (8) All types of oil field chemicals including synthetic products used in petroleum operations, oil well cement and cement additives, required for drilling, production and transportation of oil or gas (9) Process, production and well platforms for oil, gas and water injection including items forming part of the platforms and equipment required like process equipment, turbines, pumps, generators, compressors, primemovers, water makers, filters and filtering equipment, Telemetery, Telecommunication, Tele-control and other material required for platforms (10) Line pipes for flow lines and trunk pipelines including weight-coating and wrapping (11) Derrick barges, Mobile and stationary cranes, trenchers, pipelay barges, cargo barges and the like required in the construction/installation of platforms and laying of pipelines (12) Single buoy mooring systems, mooring ropes, fittings like chains, shackles, couplings, marine hoses and oil tankers to be used for oil storage and connected equipment; Tanks used for storage of oil, condensate, water, mud, chemicals and related materials (13) All types of fully equipped vessels and other units/equipment required for pollution control, fire prevention, fire fighting, safety items like Survival Craft, Life Raft, fire and gas detection equipment, including H 2 S monitoring equipment. (14) Mobile and skid mounted pipe laying, pipe testing and pipe inspection equipment (15) All types of valves including high pressure valves (16) Communication equipment required for Petroleum operations including synthesized VHF Aero and VHF Marine multi channel sets (17) Non directional radio beacons, intrinsically safe walkie-talkies, directional finders, EPIRV, electronic individual security devices including electronic access control system (18) Specialized antenna system, simplex telex over radio terminals, channel micro wave systems, test and measurement equipment (19) X-band radar transponders, area surveillance system (20) Common depth point (CDP) cable, logging cable, connector, geo-phone strings, perforation equipment and explosives (21) Wellhead and Christmas trees, including valves, chokes, heads spools, hangers and actuators, flexible connections like chicksons and high pressure hoses, shut down panels (22) Cathodic Protection Systems including anodes (23) Technical drawings, maps, literature, Data tapes, Operational and Maintenance Manuals required for petroleum operations (24) Sub-assemblies, tools, accessories, stores, spares, materials, supplies, consumables for running, repairing or maintenance of the goods specified in this List LIST 12 (See S. No. 187 of the Table) (1) LSI/VLSI tester (2) Micromanipulators (3) Molecular beam expitaxy system (MBE system) (4) Expitaxial reactors (5) Chemical vapour deposition (CVD) system - Low pressure CVD (LP CVD) - Metal organic CVD (MO CVD) (6) High pressure oxidation systems (7) Chemical etching systems (8) Plasma etchers (9) Reactive ion beam etchers (RIBE) (10) Reactive ion etchers (11) RF sputtering systems (12) Direct digital control furnaces (13) Ion-implanters (low/medium/high current) (14) Lithography systems (15) Direct step on wafers/steppers (16) X-ray lithography systems (17) E-Beam mask making system (18) E-Beam direct write system (19) Mask aligners (20) Mask inspection systems (comparators) (21) Tape automated bounders (22) Laser zappers (23) Wafer recognition wire bonders (24) Wafer scriber or Wafer slicer or Wafer sawing machine or Wafer fractures or any combination thereof (25) Die bonders or wire bonders or combination thereof (26) Wafer sawing machine; Wafer prober (27) Leak detection system (28) Clean room air showers (29) Particle monitor/counter both air and liquid borne (30) Automatic encapsulation system; Automatic marking/branding machine (31) Clean room laminar flow air handling system (32) Ultra clean room equipment (33) Ultra high purity demineralised water treatment plant (34) PVDF welding and orbital welding machines (35) Ultra high pure (UHP) gas distribution system (36) Toxic gas distribution/monitoring system LIST 13 (See S. No. 188 of the Table) (A) Dental equipment, namely :- (1) Air motor/turbine hand piece and control box with foot control (2) Air rotor/turbine complete with or without air compressor (3) Dentral engines, for laboratory work or for chair side clinical work on patients (4) Dental operating lights and fibre optic lights (5) Ultrasonic dental cleaning system (6) Ultrasonic scalers of all types (7) Spot welders for dental use with auxiliary functions, outlet :- annealing jack, heat-treat tables, auxiliary cables or plug-in vise (8) Air turbine head/cartridges - borden turbines - regular cartridge, borden turbines - silencer cartridge and quiet air turbines - compact miniature standard (9) Dental burs of all varieties of various shapes and sizes - carbide, diamond or steel (10) Dental hand pieces, for - air motor, air turbine or drilling engines (clinical and laboratory) for filling, packing and condensation purposes and micromotors (11) Endodontic instruments (root canal instruments), brosches, reamers and files, fillers/wideners and pluggers (12) Anaesthetic cartridges for dental use (13) Body contoured self-adjusting electrically operated dental chair (14) Equipment for chrome cobalt work (15) Fibre optic light equipment with attachments for dental work (16) Porcelain furnace (17) Sand blasting equipment for dental use (18) Vacuum investing equipment for dental castings (19) Developing tarks for dental X-ray (automatic and ordinary) (B) Ophthalmic equipment, namely :- (1) Projection magnifier for contact lens inspection and verification (2) Radiuscope base curve (for measurement of contact lenses) (3) Contact lens thickness measuring gauge (4) Stereozoom microscope for inspection of contact lenses (5) Softometer for measurement of the base curve of soft contact lenses (6) Contact lens lathes (7) Contact lens polishing machines (8) Ophthalmic operating lights and fibre optic lights (9) Exophthalmometer (10) Ophthalmo dynamometer (11) Corneal anesthesiometer (12) Dark adaptometer (13) Glare testing equipment (14) Pantoscope (15) Cryo-lathe (16) Ophthalmic cryo equipment (17) CAM stimulator (18) Roper hall foreign body locator (C) Other medical equipment, namely :- (1) High powered X-ray unit more than 50 KW with special attachments for paediatric patients, image intensifiers, TV system and cut film camera (2) Automatic electronic blood cell counter (3) Multi channel rocorder for cardiac electrophysiology with computerised analysis system including facilities for memory (4) Equipment for computerised intra-operative mapping system (5) Operating table-electro hydraulic type (6) Operating lamps - shadowless (7) Immuno-flourescence microscope with or without attached photo micrography set (8) Cryostat (9) Thermodyne (10) Ultramicrotome (11) Cardio-tachograph (12) Intensive care servo-controlled incubator (13) Open infant care system with servo control (14) Oxygen analyser (15) Apnea monitor (16) Non-invasive continuous BP monitor (17) Transcutaneous oxygen monitor (18) `Filter cartridge' of `filter self rescuer' (19) Fibre optic endoscopes and accessories (20) Portable intermittent traction machines (21) Burn therapy dressing soaked in protective gel (22) Cystoscope and colposcope (23) Urological X-ray examination table (24) Bipolar angiography equipment (25) Electron microscope (26) Rotary microtome (27) Billirubinmeter (28) Fluorescent microscope (29) Phase contrast microscope (30) Inverted microscope (31) Coagulometer (32) Daree gromel illuminator microscope (33) Densitometer (34) Tissue processor (35) Paediatric/neonatal laryngoscope (36) Resuscitator other than compressed air breathing type (37) O 2 blenders (38) Reinforced corrugated tubing (39) Automatic plasmapheresis equipment (blood cell separation) (40) Gas failure alarms (41) Ultrasonic nebulisers (42) Heat nebulisers (43) Local analgesic spray (44) Non-rebreathing valves (45) Ethylene sterilisers (gas) (46) High pressure, pulsing, electronic controlled autoclaves (47) Anaesthesia apparatus (48) Hypothermia machine (49) Respirometer (50) Pulmonary function test machines (51) Capnograph-CO 2 meter blood gas-CO 2 meter gas to gas (52) Oxygen blending mask (53) Paediatric anesthesia set (54) Cautery proof cardioscopes with memory (55) Dosemeter (56) Polystyrene phantoms (57) Water phantom (58) Mould room equipment (including styrofoam gatter) (59) Radiation field analyser (60) Survey equipment (including neutron monitor) (61) Densitometer for film densitometry (62) TLD (for internal dosimetry) (63) Isotope calibrator (64) Whole body human phantom (65) Angioscope for coronary angiography (66) Doppler equipment (67) Xeroradiographic equipment (68) Urological X-ray examination unit (69) Pressure injector with rapid serial changing unit (70) Computerised tread mill (71) Vector cardiograph (72) Polygraph (73) Phonocardiograph and systolic time interval equipment (74) Tonometer (75) Photo-coagulator (76) Lithotome (77) Paediatric resectoscope/audit resectoscope (78) Peritoneoscopes and accessories thereof (79) Extracorporal lithotriper (80) Calibrated thermo compensated/thermostabilised anaesthetic vapouriser (81) Foetal monitor (82) Bipolar coagulator and forceps (83) Electro-encephalography equipment (84) Doppler carotid scanner (85) Electromyography equipment and accessories thereof (86) Cryosurgery equipment (87) Trans-cutaneous nerve stimulator (88) Filters for extra corporal circulation (89) PET scanner (90) Operating microscope for microsurgery (91) Operating instruments for microsurgery (92) Cardio-vascular catheterisation lab equipment (93) Automatic/laser multi image and multi format cameras (94) Bedside arrythmia analyser/monitor (95) High pressure contrast medium injector (96) Thermal printers, black/white for medical use (97) Thermal printer, colour for medical use (98) Optical disc recorders for medical image storage (99) Multichannel patient monitoring system upto three channels provided - (a) system has plug-in module option for any three parameters out of ECG, respiration, BP, pulse and temperature or (b) system has monitoring options for any three parameters out of ECG, respiration, BP, pulse, temperature as well as one or more out of arrythmia, cardiac output, oxygen and carbondioxide saturation levels (100) Brain mapping system (101) Evoked potential system (102) Holter monitor system (103) X-ray tubes and tube inserts for X-ray equipment, CT and Cardiac more than 20/40 KW (104) Micro processor controlled high frequency X-ray generator more than 50 KW (105) Contrast medium injector with or without ECG trigger (106) Catheterisation cine film analyser (107) Radiation protection equipment (108) Catherterisation table light (dentalite) (109) Air/power driven drills, saws and reamers (110) Arthoscope (111) Automatic percutaneous lumbar disectomy, console and kits (112) Urodynamic study (113) Gamma counter (114) Cell counter (115) DC Difibrilator for external use (116) Suction catheter, Epidural catheter, thermodilution catheter (117) Manual skin grafting knife and its disposable blades (118) Electric dermatome (skin grafting knife) electrically operated (mains battery powered) and its disposable knife blades (119) Air driven dermatome (skin grafting knives) operated on compressed air and its disposable knife blades (120) Mesh graft dermatome for expanding skin grafts, disposable mesh graft carriers for the above (121) The following items required by spinal patients and other categories of physically handicapped people:—(a) chairs - folding wheel chairs with detachable arms and footrests, special light wheel chairs for easy handling, motorised wheel chairs, special purpose chairs for stairs climbing for tetraplegics and paraplegic workers (b) aids for disabled, namely, folding walking frames (c) aids to extend reach to pick up small items (with small magnet pick up) (d) specialised fixtures for orthopaedic and spastic, tetraplegics for manoeuvring and providing dexterity to fingers and wrist (e) turning beds for prevention of pressure sores (f) emulsion cushions for tetraplegics and working paraplegics to avoid pressure sores (122) Multichannel (more than 3 channels) cardiac monitoring system with/without central monitoring unit (123) Hyperthermia machine (124) Polypropylene mesh for hernia repair (125) Dental X-ray machine (126) Digital imaging system for face X-rays (127) Orthopantom ram (O.P.G) X-rays for jaws (128) Jaw surgery equipment - (a) stryker saws (b) special titanium and tungsten carbide drill bits (c) jaw surgery instruments including special retractors, bone holders (129) ECG transtelephonic recorder/transmitter/recorder-cum-transmitter (130) Linear accelerator (131) Precision delivery device used for administration of insulin with penfill cartridges such as Novopen (D) Other goods, namely :- (1) Dental implant (2) Dental cements (3) Impression materials of all types/alginate/rubber base/silicon base (4) Dental fillings and non-precious metal for crown/bridge/and cast partial denture—(a) chrome cobalt/nickel chrome/porcelain bond metal/low fusing technique alloy (d) dental crowns and artificial teeth (5) Gutta-percha points-dental silver amalgam (6) Dental investment of all types/phosphate bond/gypsum bond/plaster and stone (7) Dental X-ray film - intra-oral/extra-oral/panoramic/occlusal (8) Dental porcelain of all types (9) Acrylics for dental use - denture base material heat cure and cold cure (10) Waxes of all types for dental use LIST 14 (See S. No. 197 of the Table) (1) Capacitors (excluding paper capacitors and power capacitors) (2) Ferrite parts including memory cores and ferrite magnets (3) Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC (4) Connectors (5) Magnetic-Heads (all types) (6) Loud speakers (cone type) (7) Deflection parts, namely:- (i) EHT/LOT/FBT transformers (ii) Line driver transformers (iii) Deflection coil/yoke (iv) Linearity coil (v) Width coil (8) Ceramic/Magnetic cartridges and stylus (9) Air cores and Ferrite cored transformers (10) Microphones/Microphone cartridges (11) RF/LF coils, Inductance coils, Peaking coils, Tuning coils (12) Antennas (13) Relays of contact rating upto 7 amperes (14) EHT cables (15) Level meters/level indicators/tuning indicators/peak level meters/battery meter/VC meters/Tape counters (16) Tone arms (17) Microwave passive parts (18) (i) Saw filters (ii) Ceramic filter/trap (iii) Delay lines (iv) CRT socket (v) Spark gap (vi) Degaussing coil (19) Fibre optics and other optoelectronic parts and devices namely, Couplers, Attenuators, Connectors, Splicers, Multiplexers and Demultiplexers (20) Passive optical parts, namely, Microlens and splitters, Micropositioners, Optical filters and gratings and Phase plates (21) Special purpose optical fibres, namely, polarisation holding fibres, plastic fibres and large core fibres (22) Electron guns (23) Liquid crystal displays LIST 15 (See S. No. 198 of the Table) (1) (a) Laser rods - Neodymium: YAG, Neodymium : Glass, Ruby, Erbium : YAG, TI : A1203, Alexandrite, HO : YAG (b) Helium - Neon Laser Tubes (c) Semi-conductor visible lasers (d) Dielectric coated mirrors for visible, near IR 10.6 micrometer region (e) Hard dielectric coated optics including thin film polarisers, calcite polarisers and Beam splitters (f) ZnSe mirrors, ZnSe lenses and ZnSe windows (g) Gratings and prisms (h) Dye cells and laser dyes (i) Thin film polarisers for visible, near IR region (j) Electro-optic switches for visible, near IR and 10.6 micrometer region (k) Flash lamps (Xenon, Krypton) (l) Arc lamps (Krypton) (m) Second harmonic generation crystals (2) Energy storage capacitors (3) Thyratrons (4) Photodetectors and photomultipliers (5) Metering needle valves and pressure indicators (6) Spectroscopic grade pure gases viz., Xenon, Krypton, Fluorine, Argon (7) Vacuum pumps of capacity upto 20 litres per minute (8) Quartz and Special glasses (9) Non linear crystals (10) Electro-optic and Acousto-optic switches (11) Special materials, namely, High purity gases, Kovar, Alumina and Zirconia fibres, Recrystallised Alumina Tubes, Optical polishing materials, Optical cleaning material, Dyes and Pitch for optical polishing (12) Optical filters LIST 16 (See S. No. 199 of the Table) (1) Television cameras with portable field video recorders (professional grade) (2) Audio recording equipment (3) Table top post production video editing machines (4) Four source editing controllers to control editing machines (5) 8-channel video mixer/switches (6) Special effect generators for fading and superimposing of text and graphics (7) Time base correctors/Frame synchronisers (8) Broadcast standard 3-D computer graphic systems (9) Professional grade colour video monitors (10) Portable lighting equipment with lamps for shooting in low light situation (11) Professional grade photographic cameras of all formats (12) Dark room equipment including enlargers (13) Computer control editing machines (14) Spares and accessories of above mentioned equipment as permitted by the Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting. LIST 17 (See S. No. 235 of the Table) (A)   Wireless Apparatus and accessories :- (1) HF, VHF, or UHF transreceiver (combination of transmitter and receiver) meant for amateur frequencies with accessories in assembled or kit form (2) VHF/VHF or VHF/UHF Repeater (combination of transmitter and receiver) meant for amateur frequencies with accessories in assembled or kit form (3) Transvertor for amateur frequencies in assembled or kit form (4) Grid Dip Oscillator, Radio Frequency Interference Filter, Balun Transformer, SWR bridge or reflectometer, Morse reader or Noise bridge (5) Antenna with or without feeders/Antenna rotators for amateur frequencies (6) Digital Frequency counter (upto 600 MHz) with accessories (B)   Parts :- (1) Transistors, diodes, integrated circuits/chips, thermionic valves or vacuum tubes (2) Toroidal cores, quartz crystals, relays, rotatory switches, ferrite beads (3) Variable condensers, air-dielectric type (4) Precision capacitors (fixed type) value(s) between 1pF to 5000pF (5) Spare nicad cells or pack, as required or used with the thermionic valves or vacuum tubes or toroidal cores (in the case of hand held transreceiver) (6) Slow motion tuning mechanism with or without dials. LIST 18 (See S. No. 253 of the Table) (1) Chlorine (2) Helium (3) Silicon tetra chloride (4) Germanium tetra chloride (5) Phosphorous oxychloride (6) Sulphur hexa flouride oxygen (7) Oligo-poly isocyanate ethylacetate solution (8) Colouring ink for fibre (9) Binder of polyurethane or vinyl chloride-vinyl acetate copolymer (10) UV resin-1/UV resin-2 (11) Nylon-12 granules/chips for sheath/loose tube (12) Coloured nylon-12 (13) Elongated polyethylene tape (14) Polyester tape (15) Nylon thread (16) Polyethylene cord (17) Biaxilly oriented nylon tape (18) Silica tube/rod, other than preform. LIST 19 (See S. No. 253 of the Table) (1) E-glass yarn/roving for FRP (2) UV resin for FRP (3) Complex high molecular weight resin in acrylate solution for FRP (4) Acrylated monomers (5) Photoinitiater (6) Tert butyl perbenzoate (7) Zinc soap of long fatty acid mixture (8) Modified polypropylene (9) Ethylene acrylic acid (EAA) LIST 20 (See S. No. 264 of the Table) (1) Calorimeter for semen analysis (2) Phase contrast microscope (3) Photometer for semen analysis (4) Ovucheck pregnancy detecting kit (5) Freeze drier (6) Tuberculin syringe (7) Programmed biological freezer (8) Automatic semen analyser (9) Semen straws (French medium and mini) (10) Sheath for French mini straws (11) Cryo containers above 60 litres capacity (12) Liquid nitrogen tankers above 500 litre capacity. LIST 21 (See S. No. 271 of the Table) (1) Australia AntigenRIA kit (2) Cardiac catheters with guidewires (3) Clips for aneurysms and clips applying forceps in Neuro-Surgery (4) Cardio vascular sutures (5) Cardiovascular special instruments, namely:- (i) Coronary perfusion cannulae (ii) Electrical or gas operated sternal cutter (iii) High pressure stop cocks and connectors for pressure recording (iv) Vascular bull-dog clamps (v) Vascular clamps (vi) Vascular needle holders (vii) Vascular scissors straight or angled (viii) Vascular tissue forceps (6) Compressed air breathing apparatus complete (7) D.C. Difibrilators for internal use and pace makers (8) Laryngeal Mask-Endotracheal Tube (9) Haemodialysors (10) Heart lung machine (11) Heart valve prothesis including valve frames (12) Nebulized humidifier (13) Hydrocephalus shunts (14) Hyper-baric oxygen chamber (15) Fogarty and embolectomy catheters (16) Implantable cardiac pacemakers (17) Intra-arterial catheters and guidewires and material for intervention radiology (18) Intra-cardiac patches (19) Nebulizers (excluding ultrasonic nebulizers and heat nebulizers) (20) Omayya reservoirs for intraventicular investigation/therapy (21) Operating sets for Percutaneous Nephrostomy and Percutaneous removal of kidney stones with continuous irrigation and suction with ultrasonic Lithotrite, etc. (22) Ostomy products (Appliances) for managing Colostomy, Illcostomy, Ureterostomy, Illeal Conduit Urostomy Stoma cases such as bags, belts, adhesive seals or discs or rolls, adhesive remover, skin barriers micropore surgical tapes, bag closing clamps karaya seals paste or powder, irrigation sets, plastic or rubber faceplates, flanges, male or female urinary incontinency sets, skin gels, in parts or sets (23) Oxygenator (24) plastic disposable 3-way connectors (25) Portable intermittent positive, pressure breathing apparatus (26) Pulmoflator (27) Respirators including ventimeters (28) Sengstaken tubes (29) Tracheostomy tubes (30) Ventilator used with anaesthesia apparatus (31) Vascular grafts (32) Tracheostomy tube of plain PVC, Low pressure PVC, Red Rubber Plain, and Red Rubber cuffed (33) Various types of Cardiac Catheters including balloon tipped, double Lumen and PTCA catheters, balloon dilatation catheters and Endomyocardial biopsy forceps (34) Disposable and non-disposable cannula for aorta, vena cavae and similar veins and blood vessels and cannula for intra-corporal spaces (35) Programmer for pacemaker (36) Ancillaries for blood component therapy required for the treatment of cancer, namely, Y type blood solution recipient set; Transfer pack 1000 ml. and 300 ml; disposable pherasis bowl 225 ml. and 373 ml; wasting harness with bypass, and waste bags (37) AIDS (Acquired Immune Deficiency Syndrome) test kits; Enhanced luminescene analysers for AIDS, Hepatitis and other Analyses (38) Iridium wire (39) Anti-HLA sera (AB-CDR) (40) T.P.H.A. Kits and AIDS diagnostic kits (41) Gamma knife (42) Bone Marrow Transplant Equipment including silastic long standing intravenous catheters for Chemotherapy (43) Cell Separator (44) Pressure Transducer and Pressure Amplifier (45) Cell Saver (46) Continuous Ambulatory Peritoneal Dialysis Solution Bag with or without tubing system (47) Craniotome (Pneumatic and Electric Equipment) and Drills (48) Binocular Loupes (49) Intra Aortic Balloon Pump (50) Remote After Loading Brachy Therapy Equipment (51) Dosimetry System (52) Cell Saver Equipment (53) Cell Washer (54) Thawer Equipment for Blood Warming (55) Mammography Unit (56) O 2 Concentrator (57) Ventricular Assist Device (58) Pace Maker (59) Activated Clot Time Machine (60) Cobalt Therapy Unit (61) Colour Doppler Ultrasound Scanner (62) SPECT Gamma Camera (63) Deep Therapy Unit (64) Cardiac and Vascular Angiography System including Digital Substraction Angiography (65) Pulse Oximeter (66) Blood Gas Analyser (including cartridges, if any), Sodium Potassium Analyser, Auto Analyser for enzymes, drug levels and bio-chemical investigations, or a combination of two or more of the aforesaid (67) Ultrasonic Surgical Aspirator (68) Intra Cranial Pressure Monitoring Equipment (69) Radio Therapy Simulator (70) Treatment Planning System (71) Angiography Contrast Agent (72) Mobile Image Intensifier (73) Magnetic Resonance Imaging System (74) Surgical Laser (75) Electro Hydraulic Operating Table for Cardio Throacic and Neuro Surgery (76) Implants for pain relief and bladder control (77) Artificial electronics larynx instruments (78) Ventilators other than those used with anaesthesia (79) Digital Video EEG System (80) Instruments and implants for severely physically handicapped patients and joints replacement and spinal instruments and implants including bone cement (81) Small portable pumps used for giving slow infusion of anti-cancer drugs or thalassaemic drugs LIST 22 (See S.No. 274 of the Table) (1) Ophthalmoscope-Direct/Indirect (2) Ophthalmic/Xenon Arc (3) Flurescein Angiography Equipment including Fundus Camera (4) Ultrasonic Equipment (A scan/Pacchy meter) (5) Microsurgical needles, cannulas, blades, trephine blades, membrane peelers, diathermy probes, vitreous cutters, atraumatic needles and sutures, intraocular scissors and forceps (6) Tonometer (Schiotz/Applanation/Pneumo) (7) Retinoscope streak/ spot (8) Operating glasses (2X, 4X, 6X)/ Binomag (9) Gonioscope, 3 mirror lens, special lenses for laser delivery, special diagnostic lenses (14D, 20D, 90D), Endo lens (10) Sterilisers (high speed/ethylene) (11) Specular microscope with monitor and recorder (12) Intraocular lenses/ Keratoprosthesis/orbital implants (13) Diathermy equipment (14) Synoptophore (15) Silicone Sponges/rubber/bands, for Retinal Detachment Surgery (16) Vitrectomy equipment (17) Phaco-emulsification system (18) Visual field recording equipment (19) Ocular electro physiological testing equipment [Electroretinography/ Electroculography/ Visually evoked response equipment (ERG/EOG and VER)] (20) Keratometer/ Automatic Keratometer (21) Prism bars (22) Laser Interferometer (23) Pacchymeter - optical/electronic (24) Aspiration - irrigation equipment (25) Automatic refractometer or lensometer/ projection lensometer or a combination of the aforesaid (26) Complete refraction unit with phoropter/ projection - chart (27) Ophthalmic hydraulic chair (28) Low visual aids and sets (telescopic glasses) (29) Colour vision testing equipment Photoelectric keratoscope and thermokeratoscope (31) Pseudo-isochromatic chart book/ Ishiare (32) Slit lamp biomicroscope/ photo slit lamp (33) Surgical operating zoom microscope with closed circuit TV camera (34) Surgical operating microscope manual (35) Argon/ krypton laser (36) Yag laser, excimer laser or diode laser LIST 23 (See S. No. 275 of the Table) (1) Otoscope (2) Impedance Audiometer (3) BERA (Brain Evoked Response Audiometry) (4) Speech Audiometer (5) Surgical Operating Microscope (6) Fresnel's glasses (7) Magnifying Operating Glasses (Magnifying Loupes) (8) Dental engines, Micro motors, handpieces, ENT Burrs, Steel Burrs, Tungsten Burrs, Carbon Burrs with Titanium coating (9) Microsurgical instruments for all Ear surgeries (10) Sialistic sheet used for Tympanoplasty operations (11) Sinoscopes 0 0 , 30 0 , 70 0 , 120 0 (2.6 mm and 4 mm diameter) (12) Instruments for Endoscopic Sinus Surgery (13) CCD Camera, Monitor, VCR to fit with Sinoscopes (14) Cochlear Implants and equipment for performing Cochlear (15) Voice Prostheses (16) Blom Singer Voice Prostheses (17) Electronic Larynx (18) Sigel's Speculum (19) Microlaryngeal instruments (20) Microlaryngoscope (21) Fibroptic Flexible Nasal Pharyngo Laryngoscope (22) Fibroptic Flexible Laryngo Bronchoscope (23) Video Laryngo Bronchoscope and Video Oesophago Gastroscope (24) Stroboscope (25) Fibroptic Flexible Oesophago Gastroscope (26) Video Processor (27) Video Cassette Recorders used along with the Video Endoscope LIST 24 (See S. No. 276 of the Table) (1) 12 (+/- 1) mm Laparoscope (Single incision) (2) Falope Ring - applicator single incision (for two rings) and procedure instruction manual, kit containing guide and loader and cleaning brush (3) 12 (+/- 1) mm Trocar (including piston type) with spare washers for sleeve and canulae and cleaning brush (4) Fibre Optic Light Cable (5) Bulbs, fuse lamps, Adapter for Fibre Optic Light Cable/Laparoscope (6) Carbondioxide (CO 2 ) cylinder with pneumoperitoneum apparatus (7) Light Source (8) Machine for Gas Insufflator with Gas Tubing Spare Carbondioxide (CO 2 ) Hose Pipe and a Gauge (9) Dual incision applicator Two rings (10) Trocal and Cannula 6-8 mm with valves gas stopcock (11) Probe 34-37 cm (12) Verres Needle (4" and 5 1/2") (13) Minilight source with accessories consisting of:- (a) 6 volts rechargeable battery (b) AC battery charger (c) AC power supplier 220 volts (d) Inter-connection assembly (e) Convertor (14) Falope Rings (15) 6-8 mm Laparoscope (double puncture) (16) Scissors 34-37 cm (17) Suction Cannula 34-37 cm Notes:- (A) Item Nos. 6, 7 and 8 may be imported separately or in combinations as dual control assembly. (B) Item Nos. 1 and 2 may be separate or in combination; when in combination, it is called Laparocator. LIST 25 (See S. No. 278 of the Table) A. (1) Braille writers and braille writing instruments (2) Handwriting equipment ,Braille Frames, Slates, Writing Guides, Script Writing Guides, Styli, Braille Erasers (3) Canes, Electronic aids like the Sonic Guide (4) Optical, Environmental Sensors (5) Arithmetic aids like Taylor Frame (arithmetic and algebra types) Cubarythm, Speaking or Braille calculator (6) Geometrical aids like combined Graph and Mathematical Demonstration Board, Braille Protractors, Scales, Compasses and Spar Wheels (7) Electronic measuring equipment, such as calipers, micrometers, comparators, gauges, gauge blocks, Levels, Rules, Rulers and Yardsticks (8) Drafting, Drawing aids, tactile displays (9) Specially adapted clocks and watches B. (1) Orthopaedic appliances falling under heading No. 90.21 of the First Schedule (2) Wheel chairs falling under heading No. 87.13 of the First Schedule C . Artificial electronic larynx and spares thereof D . Artificial electronic ear (Cochlear implant) LIST 26 (See S. No. 167 of the Table) 1. All types of Refinery Process Units including distillation (CDU, VDU, Condensate Fractionator); thermal cracking (Delayed Coker, Visbreaker, Flexicoker); catalytic cracking(FCC, Hydrocracker); lube processing (Deasphalting, Dewaxing, Solvent Extraction); hydro-desulphurisation/hydrotreating (Naphtha, Diesel, VGO, ARDS, LC Fining, H. Oil); alkylation; isomerisation; catalytic reforming; treating (Merox, Amine); recovery (Propylene, Ethylene, Butane); synthesis (MTBE, TAME); gas concentration plant; bitumen blowing; sour water stripping, extraction (Pentane, Hexane, BTX). 2. All types of Hydrogen Generation, Recovery and Purification Plants; Sulphur Recovery Plants including Tail Gas Treatment Units; with associated components and equipments, including reactors (like shift, Claus, hydrotreater, CBA, desulphurizer), furnaces, steam reformers, waste heat boilers, condensers, Pressure Swing Adsorption (PSA) systems, incinerators, vessels, boilers, pumps, compressors, drivers; along with associated instrumentation control systems and auxiliaries (skidded or otherwise). 3. All types of Utility Systems, including Nitrogen Systems comprising of generation, storage and vaporization plants; Flare Systems comprising of flare tips, stacks, seal drums, knockout drums and pumps; Refrigeration Systems comprising of compressors, refrigerant storage and heat exchangers; Emergency Power Systems comprising of generators, UPS and batteries; with component equipments and all systems auxiliaries, instrumentation control systems. 4. All types of Process Subsystems, including Continuous Catalyst Regeneration Systems for Reformer, Recovery Plus Systems for Reformer; Power Recovery Train Systems for FCC; Feed Nozzles for FCC, Vapour Recovery Systems; Cryogenic Systems for LPG either supplied separately or as a whole, with component equipments, drivers, instrumentation control systems, and auxiliaries. 5. All types of Water Handling Treatment Systems, including sea water intake systems comprising of sea water band screens; Desilting systems for still basin; Sea Water filtration/Chlorination Systems; Desalination plants; Cooling Water Towers; Demineralization plants; Condensate Polishing Systems; Deaerators and Potable Water Systems; and all component equipments, vessels, pumps, vapourisers, condensers, filters, eductors, heat exchangers, drivers, screens, framing structure, gates, instrumentation control systems, activated carbons, ion exchange resins, resin traps, additive injection systems and auxiliaries, (skidded or otherwise). 6. All types of Effluent Solids/Liquids/Gaseous Processing, Handling, Control, Abatement and Disposal Systems, including plate interceptors, dissolved air floatation devices, skimmers, hydrocyclones, clarifiers, chemical dosing systems, acid treatment and biological treatment systems; Spent Caustic Neutralisation Systems and Sewage Filtration/Treatment Systems; with component equipments, instrumentation control systems. 7. All types of Air Handling Systems and Equipments, including plant/instrument air compressors, FD/ID fans, blowers, dehumidifiers, pneumatic systems, mixers, dryers, intake filters, vents, silencers, cyclones, stacks, manifolds, ducts; with drivers, auxiliary seal/lube/control oil systems, instrumentation control systems. 8. All types of Fired Heaters and Boilers, with radiant coils and sections, transfer line assemblies, convection coils and sections, cross over/jump over pipes, fittings, tube sheets, tube supports, refractory materials, structural steel supports, casings, stacks, dampers, soot blowers, ducting systems, gas/oil/dual burner assemblies, burner tiles, waste heat boilers (WHB), steam generators, economizers, air/fuel preheat systems, FD/ID fans, fuel gas/oil skids; and including LPG vaporizers, steam superheaters, heat recovery steam generators, electric heaters, FCC flue gas coolers, steam reformers, CO boilers, circulating fluidised bed boiler, auxiliary boilers, process interheaters, thermal reactors, thermal incinerators, coke feeders, limestone feeders, ESP/baghouse filters; alongwith associated instrumentation control systems, including burner lighting, flame detection and burner management systems. 9. All types of Compressors, including axial, centrifugal, diaphragm, reciprocating, rotary screw and sliding vane type compressors; for gas, air, hydrocarbon and all special services including FCC Power Recovery Trains (PRT); LPG vapour return blowers; with drivers of motor or steam turbine or expansion turbine or engine or gas turbine or hydraulic turbine types; speed governor systems, seal/lube/control oil systems (skidded or otherwise), gear assembly, bearings, barring gears, clutch, couplings, intercoolers, after coolers, suction filters; instrumentation control systems including vibration monitoring anti surge control, inlet guide vane control, sequencer control, control panel and machine condition monitoring systems. 10. All types of Heat Exchangers, including shell and tube, double pipe, kettle, plate welded plate, high pressure (breech lock), Armstrong and brazed types; with plain or fin or High Flux or U tubes for cooling, intercooling, trim cooling, chilling, condensing, crystallizing, heating, vaporizing or reboiling services; with tubes, tube sheets, head assemblies, shells, flanges, bolts nuts, gaskets, baffles, tie rods; instrumentation and control systems. 11. All types of Air Cooled Exchangers, for cooling, intercooling, trim cooling, chilling and condensing services; with plain/finned tubes, of carbon steel, admiralty brass, alloy steel, stainless steel, monel or titanium or other materials; with fans, fan drivers, structural steel support frameworks, instrumentation and control systems, antivibration systems. 12. All types of Agitators and Mixers, including static, jet, dilution types; motor drivers, aeration systems; with instrumentation control systems. 13. All types of Filters, Screens Strainers; including backwash, bucket, carbon, cartridge, duplex, pressure/mechanical, rotary, drum, sand, sock/bag, vacuum types, and special FCC net bottoms catalyst filters; screens, strainers, demisters and sea water clarifiers; with instrumentation control systems. 14. All types of Vacuum Producing Equipments, including ejectors, eductors, venturies; with instrumentation control systems. 15. All types of Materials Separation systems, including cyclones, centrifuges, coalescers, dust collectors, electrostatic precipitators, oily water separators, flocculators; and specialized systems of Crude Oil Desalters, Reactor, Cyclones and Regenerator Cyclones for FCC, third Stage Separators and Fourth Stage Cyclone Separators for FCC; with vessel internals, grids, distributors, supports, instrumentation control systems. 16. All types of Materials Transporting Equipments, including loading unloading arms and racks; gantries, dispatch tanks, loading/ transfer pumps, hydraulic systems, weigh bridges, Diesel shunters, feed or injection or spray nozzles, skimmers, soot blowers; with instrumentation control systems, including load cells and metering stations. 17. All types of Electrical Equipments including switchyard equipments, transmitters, relays; solar power systems, including solar panels, batteries and chargers; phase shift monitors, motor or steam turbine generators, protection relays for generators, auxiliary seal/lube/control oil systems, actuators, annunciators, lighting masts, lighting fittings, panels; batteries and battery chargers; bus ducts; all types of cables including power/instrument/compensating/fibre optic/coaxial/control cables; cable joints, capacitors, distribution boards, fittings, substations, grounding/neutral resistors; heat tracing systems including insulation; microprocessor based process controllers; local control stations, motor control centres, power control centres, HT/LT motors, shock eliminators, HT/LT switch gears, transducers, HT/LT transformers, UPS and variable speed drivers over current protection devices, instrumentation and control systems including load distribution and management systems and auxiliaries, (skidded or otherwise). 18. All types of Materials Handling Equipments including belt or pneumatic conveyors, ducts, hoists, bucket or jib cranes, (with or without gangways), pipe and hoses, funnels, hoppers, disengaging lock hoppers, catalyst addition pots, valves and sampler devices; bagging weighing and bag stitching systems; weigh bridges; buoy systems for crude oil receipt; pipeline and manifolds with valves, fenders, mooring aids, laser docking systems, product tanker loading facilities; with associated equipments, instrumentation and control systems, and auxiliaries. 19. All types of coke handling and storage equipments, including coke crushers, coke cutting systems, coke drum unheading devices, coke drum switching systems, coke conveyors, stackers and reclaimers, silos/hoppers, dust abatement systems, belt weighers; Sulfur Handling and Storage Equipments and Sulphur Granulation or Flaking or Prilling Systems with associated equipments, instrumentation and control systems and auxiliaries. 20. All types of Product Filling Systems, including LPG bottles filling machines and bitumen drum filling machines; and associated equipments, instrumentation and control systems and auxiliaries. 21. All types of injections and Dosing Packages, for Injection or metering or dosing of chemicals, additives, inhibitors, odourisers, oxygen scavengers, blocides, chlorine, polymers, caustic, acids, emulsifiers, antifoams or antifoulants, with their component equipments, instrumentation, like drums, tanks, pumps; instrumentation and control systems, auxiliaries (skidded or otherwise). 22. All types of Pumps, including API or non-API; centrifugal, diaphragm, in-line, jockey, vertical, booster, barrel, gear, Sundyne, screw, ram, reciprocating or submersible types; single stage or multistage types; for petroleum crude or intermediate products or petroleum products and byproducts; water including sea water and boiler feed water; chemicals, slops or sludge services; liquid booster for LPG (cryogenic); with motor or steam or hydraulic turbine or diesel engine drivers; and instrumentation and control systems, auxiliaries, including seals, flushes, gear boxes, water cooling harnesses and lube oil consoles. 23. All types of Tanks and Storages, including plate materials, flanges, fasteners, nozzles, fittings and other components for assembly/construction/erection at site; and instrumentations, including relief, breather, and rim vent values; nitrogen blanketing systems, roof drain pipings, rim seals, flame arrestors and automatic tank gauging systems; for oil, hydrocarbon (petroleum crude, products, byproducts, intermediate and blend components), water, chemicals, slops, sludge storage in either cone, fixed, floating, dome or internal floating roof configurations; solids storage in silos, bins or hoppers and LPG/propylene/ethylene/propane/butane storage in spheres, bullets or cryogenic tanks; and instrumentation and control systems. 24. All types of Columns, either supplied separately or together; comprising of grids, screens, distributors, nozzles and their supports/fasteners and accessories; for services like absorption, desorption, striping, fractionation, distillation, splitting, stabilization, extraction, washing or scrubbling services; and column internals comprising of trays either bubble, jet, multi downcorner (MD), sieve or valve trays; or either random or structured type packings; and their appurtenances, instrumentation and auxiliaries. 25. All types of Vessels and Drums, either supplied separately or together, comprising of shells, heads, internals, grids, screens, demisters, coalescers, boots, distributors, packing and their supports/fasteners and accessories, for storage, separation, reaction, mixing, decoking, degassing, flashing, draining, blow down, desuperheating, drying, sealing, receiving, surge and interface controlling services; and their appurtenances, instrumentation, insulation and auxiliaries. 26. All types of Reactors, either supplied separately or together, comprising of shells, heads, catalysts, support materials, grids, screens, demisters, coalescers, distributors, packings and supports/fasteners and accessories; for carrying out cracking (FCC Reactor and Spent Catalyst Stripper), coking (Coke Drums), visbreaking, hydrotreating, hydrodesulphurization, hydrocracking, catalytic reforming (Platformer), shift, sulphur (Claus), adsorption (CBA, PSA), oxidizing, treating (Merox), regenerating (FCC Regenerator/Combustor), desulphurising reactions; spray and mixing nozzles and their appurtenances, instrumentation and auxiliaries. 27. All types of Instrumentations, including various types of level/ pressure/density/temperature/flow instruments, detectors, level/pressure/ draft/temperature gauges, capacitance/level/limit, proximity switches, transmitters, annunciators, controllers, converters, transducers, temperature sensor assemblies, load cells, orifice assemblies, rotameters, pilot tubes, venturies, meter runs, control/metering panels, pneumatic/motorised/ hydraulic/piston actuators, recorders, solenoid operated valves, transmitters, thermocouples, temperature elements, sight glasses, amplifiers, annubars, barriers/isolators, all types of flow meters, custody transfer meters, meter provers, density meters, electromechanical/magnetic/nuclear/radar/ ultrasonic level indicators weighing and bagging systems and test equipments for testing and calibration of above instruments. 28. All types of Transmitters and Monitors, including electronic transmitters for measurement of level, pressure, flow speed, temperature and weight; and monitoring systems for ambient air, fugitive emissions, pipelines, speed, stock emissions and vibration. 29. All types of Control Equipments, including ball/butterfly/gate/globe/needle/plug/bellow sealed type control valves; shutdown valves, self actuating, solenoid, on/off, fast acting quarter turn, pressure regulating, breather and pressure/vacuum relief valves; pilot operated safety valves, and vales for specialised services, such as catalyst addition systems and lock hopper control systems. 30. All types of Control Hardware and Software Systems, including Distributed Control Systems (DCS), Emergency Shutdown Systems (ESD), Programmable Logic Controllers (PLC), Security Access Systems, Terminal Automation Systems, Advanced Process Control (APC) Systems with Real Time Optinizer (RTO), Supervisory Control and Date Acquisition (SCADA) Systems, and Refinery Information Management System (RIMS) with operator panels, computers, date loggers, interfaces, relay cabinets, engineering controls, large display screens, microwave transmission and receiver equipments, logic multipoint recorder/multiplexers, and their hardware and software. 31. All types of Fire Gas Detection Systems, consisting of LEL/fire/smoke/UV/gas/IP/toxic detectors; panels, cables, weather protection housing, junction boxes, detector cards, cabinets, calibration equipments, beacons and lights and their hardware and software. 32. All types of Pipes, Tubes and Hoses, including cladded, coated, lined, made of carbon steel, low temperature carbon steel, alloy steel, stainless steel, GRP, copper, aluminium HDPE, PP, fibre glass, monel incolloy, titanium or any other materials; and other in seamless or welded construction; for all applications fields joint coating materials; with instrumentation and control systems like pipeline surge relief systems; auxiliaries, painting and insulation. 33. All types of Pipe Fittings, including elbows, connectors, tees, pipe fabrication accessories, sprayers, nozzles, plugs, packing glands, rings, flanges, gaskets, supports, pads, manifolds, siphons, shock absorbers, struts, fasteners; mitre/long radius/short radius bends; sockolets, weldolets, spray nozzles, graylock fittings; swagelock/compression fittings; insulating kits, special steam traps, liquid float traps, bellows, flexible hoses, couplings, vent silencers; and speciality items like Teflon sliders, standpipe expansion joints, spring supports/hangers, scraper tees; pipeline and manifolds with valves; cleaning/scraping/monitoring pigs; pig launcher, pig receiver and pig detection system; cathodic protection system with sacrificial anodes and CP monitoring system; with instrumentation and auxiliaries. 34. All types of valves, including ball, butterfly, check, diaphragm, gate, double disc or knife gate, globe bellow sealed globe, jacketed, plug, through conduit type valves; with manual/gear/motor/hydraulic operations; for oil, water, steam, hydrocarbon, chemical, cryogenic, subsea, nitrogen blanketing and thermic fluid services; and specialised services valves, like FCC butterfly valves, Cooker switch valves, standpipe slide valves, flue gas divertor valves, pressure reducing station systems, pipeline and manifolds and riser tie-in manifolds. 35. All types of Gaskets and fasteners, including anchor/foundation/ structural bolts; flanges, studs, nuts, washers; and metallic/soft/spiral wound gaskets and O-rings. 36. All types of Structural Steels, Materials and Plates including carbon steel/LT carbon steel/alloy steel/stainless steel plates; bars, rolled sections, tubular sections, HYSD bars, dampers, prefabricated treaties, pipe bridges with pre-installed pipes, loading platforms, steel A frames, blast proof doors; steel tubulars, seamless welded; special steel piles; dolphins; low, medium high strength steel, fasteners; and special application refractory/copalite/sulphide resistant quick setting cements. 37. All types of ferrous or non-ferrous prefabricated/semi fabricated, Plant Structures, including pipe racks, supporting frames, trestles, pipe bridges with pipes pre-installed and pre-insulated. 38. All types of Analyzers, either on-line or off line; for measurement of H 2 S, Oxygen, NOX, SOX, CO 2 , CO, hydrocarbon, dew point, density, conductivity, pH, combustible gases, oil in water, vapour pressure, silica, sodium, distillation, flash point, moisture, viscosity and smoke point; and analyzer sampling systems/ cubicles; analyzer houses with sample conditioning systems' sample probes/sensors, tubings, HAVC systems, calibration gases cylinders and Drager tubes. 39. All types of Laboratory Equipments, including sampling, quality control and analytical equipments for testing and measurement of various petroleum crude/products/byproducts, quality parameters; and including sample collection equipments, gas/ion chromatograph, CFR engines for octane cetana number, pulse NMR, spectrophotometers of different types, distillation equipment systems, analyzer management systems and laboratory information management systems, with instrumentation, auxiliaries, hardware and software. 40. All types of Safety and Fire Fighting Equipments, for safety of personnel and plant machinery including fire suits, fire monitors, Q.B. bulbs, spray nozzles, ambient air monitors, heat and flame resistant clothings, portable extinguishers, deluge skid systems, explosimeters, rupture discs, fire fighting systems, fire tenders; foam systems with foam storage and monitor, transport and booms; snorkels, sprinkler, systems breathing air apparatus; fire proofing materials for passive fire protection of steel structures and oil spill protection booms, with auxiliaries. 41. All types of Communication Equipments, including cables, bone mikes, frequency synthesizers, meteorological instruments; microwave transmission and receiving equipments, public address system, intrinsically safe walkie-talkies, UHF/VHF multi channel communication systems, radio telemetry systems, with remote telemetry units, portable units and PC based master telemetry units and antenna systems. 42. Initial charge of all types of catalysts, deslocants, zeolites, activated carbons, clay molecular sleeves, used in refining and processing of petroleum crude, petroleum products and by-products. 43. Software Support Systems, including training simulation systems, electronic documentation systems, CAD stations, date tapes; plotters, printers, software scanners, manuals; operation/maintenance/safety including licenses; specifications, drawings, technical literature, and their hardware and software. 44. Special Maintenance Systems, including hydrojetting tools, pneumatic torque wrenches; EOT/mobile cranes; hoists, grinders, high pressure cleaning systems, induction bending machines; auto welding machines, various welding equipments like girth welding, vertical flux cords, bottom saw, four side edge preparation, angle rolls; rolling and levelling machines, sky climbers, hot tapping machines bolt tensioners, high pressure test pumps, tube bundles pullers, tube nippers, ultrasonic leak detectors, machine condition monitoring systems and associated sub-assemblies; vibration analysers and computerized alignments systems. 45. Sub-assemblies, tools, accessories, protective coating/paint materials, stores, spares, materials, supplies, consumables for running, repairing or maintenance of the goods specified in this List. LIST 27 (See S. No. 169 of the Table) (1) Hot mix plant batch type with electronic controls and bag type filter arrangements more than 120 T/hour capacity (2) Electronic paver finisher (with sensor device) for laying bituminous pavement 7 m size and above (3) Slip form/fixed form paverfinisher for laying concrete pavement (4) Surface dressing equipment (self propelled) (chips spreader) (5) Slurry seal machine for filling up cracks in roads (6) Kerb laying machine (7) Mobile bridge inspection unit (8) Mechanical broom with blower (9) Toll collection and traffic control equipment (10) Electronic Total station instrument for topographic survey (11) Global Positioning System (GPS) Instrument (12) Stone crushing (cone type) plants (13) Concrete Batching plants 50 cum/hr or more (14) Hydraulically operated self propelled pilling rig with accessories (15) Hydraulically operated rough terrain self propelled 100 tons crane with telescopic boom (16) Hydraulically operated self propelled soil boring equipment with casing pipes for deep earth anchore (17) Mobile concrete pump placer of 90/120 CU.M/HR capacity (18) Automatic asphalt extraction equipment (19) Fully automatic, hydraulically operated, pre cast segment moulds (20) Hydraulic gantry crane of 100 tonnes capacity for launching truss (21) Skid steer loadors LIST 28 (See S. No. 174 of the Table) (1) Radio communication equipment including VHF, UHF and microwave communication equipment of the following description, namely, wireless in local, loop system (excluding terminal equipment) (2) Apparatus, for carrier current line systems or digital line systems of the following description, namely:- (a) HDSL system (b) DLC system (c) SDH system LIST 29 (See S. No. 175 of the Table) (1) Telephonic or telegraphic apparatus of the following description: (a) switching apparatus for cellular mobile telephone service (b) base station controllers (2) Radio communication equipment including VHF, UHF and microwave communication equipment with following description, namely, base transceivers stations (BTS) (3) Network management stations (4) Cellular repeaters (5) BTS ancillary equipment (6) Computers for billing and customer service (7) Voice mail service hardware (8) Short message service hardware (9) Automatic call distribution system (10) Transcoders (11) BSS test equipment LIST 30 (See S. No. 176 of the Table) (1) Paging control terminal (2) Transmitter controller (3) Paging transmitter (4) link transmitter/link repeater, monitor receiver (5) Link receiver (6) N+1 Arbitrators for the above, hot standby panel (7) Combiners (8) Automatic monitoring system (9) Network management control system (10) Integrated ACD/OAP system (11) Isolators (12) Cavity filters (13) Multicouplers (14) Directional power sensors (15) Communication analysers (16) Radio communication test set up, spectrum analyser, field strength meter (17) POCSAG or FLEX concoders (18) Global positioning system (19) Simul cast controller (20) Automatic call distribution equipment/system LIST 31 (See S. No. 177 of the Table) (1) Satellite communication equipment (other than customer premises equipment) (2) Network management system. LIST 32 (See S. No. 178 of the Table) (1) Controllers - (a) Network controller; Master controller, (b) Line conditioner for controller, (c) Computer for Network Management and Control System, System Watch, (d) Process Controller Frame, shelves, (e) Network Interface Module, (f) Voice Tone Module (2) Trunked Repeaters (multiple repeaters required for operations), (a) Repeaters, 350/400/800 MHz., 20-100 Watts, (b) Line Interface Module, (c) Repeater programming kit and cable, (d) Extender card, extender cable, (3) Re Module packing kit (3) Antenna System equipment- (a) Tower top pre-amplifier, (b)Bi-directional amplifier (4) Voting Equipment—(a) Voter cable, (b) Audio Revert option kit, (c) Receviver decoder module, (d) SMC main site RDM, (e) Receiver Voter Module, (f) Remote Multiplexor Module, (g) Voter Diagnostic Module, (h) RDM test cable, (i) Satellite Power supply, (j) Central Demix module, (k) Voter Shell assembly (5) Field Programming kit- (a) Radio Interface Box (RIB), (b) RIB to Repeater cable (6) Test Equipment—(a) Spectrum Analyser, (b) Field Strength Meter, (c) Global Positioning System, (d) Communication Analyser, (e) Power Meter (7) Billing System- (a) Computer system, (b) Data loggers [Notification No. 20/99-Cus., dated 28-2-1999]