Tax Management India. Com TMI - Tax Management India. Com
Case Laws Acts / Rules Notifications Circulars Tariff/ ITC HSN Forms Manuals News SMS Articles Highlights
        Home        
Standards of Input Output Norms (SION)
Home Schedules Standards of Input Output Norms (SION) This
 

03 - Engineering Products - Standards of Input Output Norms (SION)

Showing 1 to 500 of 2056 Records
 
C0001
  All Aluminium Conductor (Bare)
C0002
  Aluminium Alloy Extruded products including rods and bars
C0003
  Aluminium Alloy Ingots
C0004
  Aluminium artware
C0005
  Aluminium Circles/Slugs
C0006
  Aluminium Collapsible Tubes with or without Plastic Cap
C0007
  Aluminium Conductor Steel Reinforced(ACSR)
C0008
  Aluminium Conductor XLPE Insulated, GI/Copper Wire Armoured, PVC Sheathed Cable for 600/1000 Volts - 2 x 25 sq. mm
C0009
  Aluminium Conduit Bodies made of Aluminium and other alloying constituents
C0010
  Aluminium Extrusions/ Aluminium Profiles
C0011
  Aluminium Flexible Tubing
C0012
  Aluminium Foil commercial grade embosed/non embosed , cut to shape, performed , with /without coating with/without printing, with/without reinforcing material
C0013
  Aluminium Foil paper backed
C0014
  Aluminium Foil plastic coated/ laminated
C0015
  Aluminium Foil printed
C0016
  Aluminium Foil- Synthetic Resin/ Lacquer coated printed
C0017
  Aluminium Foil- Synthetic Resin/Lacquer coated
C0018
  Aluminium Foil plain
C0019
  Aluminium Helical-formed fittings
C0020
  Aluminium Pencil Sharpner
C0021
  Aluminium rivets
C0022
  Table, Kitchen and other house hold articles made of aluminium including anodized with or without handle irrespective of what material handle are made of (other than those covered under SION at Sl.No. C-1749)
C0023
  Aluminium Utensils with Interior PTFE Coating & Exterior Coating Material as Silicon and or PTFE base (Non stick) with/without handle
C0024
  Aluminium Wire Rod
C0025
  Cable Needle (Aluminium)
C0026
  Crochet Hook (Aluminium)
C0027
  Aluminium Cast articles including parts & components
C0028
  Re-Rollable Aluminium Strips/Coils
C0029
  Rolled Aluminium Plates, Sheets, Strips including Corrugated aluminium sheets/ strips
C0030
  Stitch holders (Aluminium)
C0031
  B.B. Cup set of 3 (Weight 100 gms)
C0032
  Ball Racer cone
C0033
  Ball Racer set of 3 (Weight: 42 gms for item 1 )
C0034
  BB axle (Weight 235 gms)
C0035
  BB Cup(Set of 2) (Weight: 82 gms for item 1 )
C0036
  BB Ring (Weight: 18 gms for item 1 )
C0037
  BB set of 7 for one piece crank (Weight 216 gms)
C0038
  BB set of 9 for one piece crank (Weight 292 gms)
C0039
  BB Shell (Weight: 247 gms for item 1 )
C0040
  Bicycle Bell (Weight: 178 gms for item 1, 16 gms for item 2 )
C0041
  Bicycle Mirror (Weight: 34 gms for item 1, 57 gms for item 2, 66 gms for item 3 )
C0042
  Bicycle Stand (Weight: 1013 gms for item 1, 76 gms for item 2 )
C0043
  Bicyle Side Stand (Weight: 231 gms for item 1, 242 gms for item 2 )
C0044
  Brake set (Weight: 539 gms for item 1, 59 gms for item 2, 70 gms for item 3)
C0045
  Brake Shoe (Set of 2) (Weight: 22 gms for item 1, 4 gms for item 2, 35 gms for item 3)
C0046
  Brake Stirrup (Weight: 148 gms for item 1, 12 gms for item 2 )
C0047
  Brake Tube (Weight: 46 gms for item 1, 10 gms for item 2 )
C0048
  Bridge Clip for mudguard (Weight: 19 gms for item 1 )
C0049
  Caliper Brake set (Weight: 523 gms for item 1, 308 gms for item 2, 64 gms for item 3 and 44 gms for item 4)
C0050
  Carrier (Weight: 1136 gms for item 1, 53 gms for item 2 )
C0051
  Chain Adjuster (Weight: 6 gms for item 1, 21 gms for item 2)
C0052
  Chain Guard(Steel) (Weight: 90 gms for item 1 )
C0053
  Chain Stay (Weight: 350 gms for item 1 )
C0054
  Chain(110 Links) (Weight: 334 gms for item 1, 81 gms for item 2)
C0055
  Chainwheel & Crank (Weight: 352 gms for item 1, 722 gms for item 2, 73 gms for item 3)
C0056
  Chainwheel (Weight: 352 gms for item 1 )
C0057
  Complete Bicycle without accessories and with Tyres and Tubes-22
C0058
  Cotter Pin - Set of 2 (Weight: 3 gms for item 1, 40 gms for item 2)
C0059
  Derailleur(Front) (Weight: 117 gms for item 1, 26 gms for item 2)
C0060
  Derailleur(Rear) (Weight: 296 gms for item 1, 65 gms for item 2)
C0061
  Double Chain wheel & Crank (Weight:675 gms for item 1, 710 gms for item 2, 73 gms for item 3)
C0062
  Expander Bolt (Weight: 7 gms for item 1, 88 gms for item 2 )
C0063
  Fork (Weight: 1061 gms )
C0064
  Fork Crown Cover (Weight: 16 gms for item 1 )
C0065
  Fork Fitting (Weight: 108 gms for item 1, 20 gms for item 2)
C0066
  Fork Guard (Pair) (Weight: 77 gms for item 1, 652 gms for item 2 )
C0067
  Fork Guard Clamp (Weight: 77 gms for item 1 )
C0068
  Frame (Weight: 3000 gms )
C0069
  Frame Cup Set of 2 (Weight: 39 gms for item 1 )
C0070
  Frame Lock (Weight: 143 gms for item 1, 57 gms for item 2 )
C0071
  Frame Lugs Set of 3 (Weight: 212 gms for item 1 )
C0072
  Frame Pipe Set of 4 (Weight: 1398 gms for item 1 )
C0073
  Frame Top Bar Pipe (Weight: 310 gms for item 1 )
C0074
  Free Wheel (single speed) (Weight: 108 gms for item 1, 99 gms for item 2)
C0075
  Front/ Back Mudguard
C0076
  Full Chain Cover (Weight: 924 gms for item 1, 4 gms for item 2 )
C0077
  Half Chain Cover (Weight: 501 gms for item 1, 4 gms for item 2 )
C0078
  Handle Bar (Weight: 869 gms for item 1, 594 gms for item 2, 40 gms for item 3)
C0079
  Handle Lever(pair) (Weight: 328 gms for item 1 )
C0080
  Handle Stem (Weight: 278 gms for item 1, 88 gms for item 2 )
C0081
  Hub Axle(Front) (Weight: 85 gms for item 1)
C0082
  Hub Axle(Rear) (Weight: 126 gms for item 1 )
C0083
  Hub Cone(Rear) (Weight: 16 gms for item 1)
C0084
  Hub Cone(Front) (Weight: 12 gms for item 1)
C0085
  Hub Cup (Rear) (Weight: 28 gms for item 1)
C0086
  Hub Cup (Front) (Weight: 20 gms for item 1 )
C0087
  Hub(Front) (Weight: 88 gms for item 1, 85 gms for item 2)
C0088
  Hub(Rear) (Weight: 229 gms for item 1, 126 gms for item 2)
C0089
  Lamp Bracket (Weight: 67 gms for item 1 )
C0090
  Mudguard(pair) (Weight: 933 gms for item 1, 246 gms for item 2)
C0091
  Multispeed Free Wheel (Weight: 397 gms for item 1, 119 gms for item 2)
C0092
  One Piece Crank (Weight: 860 gms for item 1 )
C0093
  Paddle Pair made out of Polypropylene (Net weight 450 gms per pair)
C0094
  Pedal Axle (Weight: 2 gms for item 1, 88 gms for item 2 )
C0095
  Pedal Cone (Weight: 4 gms for item 1 )
C0096
  Pedal Cup (Pair) (Weight: 20 gms for item 1 )
C0097
  Pedal Plate (2 pieces) (Weight: 26 gms for item 1 )
C0098
  Pedal Stretcher Bar (2 pieces) (Weight: 27 gms for item 1 )
C0099
  Pedal Tube (Weight: 17 gms for item 1 )
C0100
  Pedal(pair) (Weight: 165 gms for item 1, 274 gms for item 2, 290 gms for item 3)
C0101
  Plastic Chain guard (Weight: 29 gms for item 1 )
C0102
  Pump (Weight: 254 gms for item 1, 12 gms for item 2 )
C0103
  Quarter Chain Cover (Weight: 284 gms for item 1, 4 gms for item 2 )
C0104
  Rim(pair) (Weight: 2233 gms for item 1 )
C0105
  Saddle (Weight: 400 gms for item 1, 841 gms for item 2, 150 gms for item 3)
C0106
  Saddle Nose (Weight: 30 gms for item 1 )
C0107
  Saddle Strip (Weight: 236 gms for item 1)
C0108
  Saddle Wire set of 3 (Weight: 199 gms for item 1)
C0109
  Screw Racer (Weight: 27 gms for item 1 )
C0110
  Seat Axle (Weight: 39 gms for item 1 )
C0111
  Seat Clip (Weight: 142 gms for item 1 )
C0112
  Seat Pillar(5
C0113
  Seat Plate (Weight: 145 gms for item 1)
C0114
  Seat Rivet (11 pieces) (Weight: 15 gms for item 1 )
C0115
  Seat Stay (Weight: 171 gms for item 1 )
C0116
  Spanner 13 Hole (Weight: 80 gms for item 1 )
C0117
  Spanner Set of 3 pieces (Weight: 100 gms for item 1 )
C0118
  Spare Crank (Weight: 361 gms for item 1, 73 gms for item 2 )
C0119
  Spokes Set of 72 pieces (Weight: 31 gms for item 1, 611 gms for item 2, 105 gms for item 3)
C0120
  Steel Balls (Set for complete bicycle) (Weight: 56 gms for item 1 )
C0121
  Steel Pedal(pair) (Weight: 308 gms for item 1, 200 gms for item 2 )
C0122
  Triple Chain wheel & Crank set (Weight: 764 gms for item 1, 760 gms for item 2, 73 gms for item 3)
C0123
  11 KV Heat Shrinkable Dry type indoor termination for Switch gear with line in Boot for XLPE cable 240 mm. sq.
C0124
  11 KV Heat Shrinkable Dry Type Indoor Termination for Switchgear with in line Boot for XLPE Cable 185sq mm
C0125
  11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 185 mm. sq.
C0126
  11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 95 mm. sq
C0127
  11 KV Heat Shrinkable Straight through joints suitable for 3 x 185 - 240 sq. mm
C0128
  11 KV Heat Shrinkable Straight Through Joints for XLPE Copper Cable size 3 x 240 sq. mm
C0129
  11 KV Heat Shrinkable Transition joints suitable for connecting 240 sq.mm XLPE to 300 sq.mm PILC cable & 185 sq.mm XLPE cable with 300 sq.mm PILC Cables
C0130
  11 KV mass impregnated, paper insulated, lead alloy sheathed steel tape armoured Aluminium conductor conforming to IS:692/73 240 sq.mm 3 Core
C0131
  11 KV mass impregnated, paper insulated, lead Alloy sheathed steel tape armoured Aluminium conductor conforming to IS:692/73 120 sq.mm 3Core
C0132
  11 KV Straight Through Joints for XLPE Copper Cable size 3 x 95 Sq. mm
C0133
  11 KV, Indoor Vacuum circuit Breaker Panels
C0134
  Deleted
C0135
  19/33 KV 3 Core X 400 sq.mm.aluminium conductor XLPE insulated, steel wire armoured, PVC Sheathed cable conforming to IS: 7098/II/85 400 sq.mm.3 Core
C0136
  Deleted
C0137
  33 KV Insulator as per IS-9431
C0138
  40 W Twin Tube Box Type Industrial Fitting duly Pre wired with Vaccum Pressure impregnated copper wound open type Ballast, Power Factor Improvement Capacitor, Starter, Starter Seat, Mains Terminal and Lamp Holders
C0139
  600/1000 V Heat shrinkable straight joints for cable size 4 X 240 mm. sq.
C0140
  600/1000 V Heat shrinkable straight joints for cable size 4 X 185 mm. sq.
C0141
  600/1000 V Heat shrinkable straight joints for cable size 4 X 120 mm. sq.
C0142
  600/1000 V Heat shrinkable straight joints for cable size 4 X 70 mm. sq.
C0143
  600/1000 V Heat shrinkable straight joints for cable size 4 X 25 mm. sq.
C0144
  600/1000 V Heat shrinkable straight joints for cable size 4 X 16 mm. sq.
C0145
  600/1000 V Outdoor overhead termination complete with cable lugs & Armour clamping ring for 4 core copper cable 4 X 240 mm. sq.
C0146
  600/1000 V Outdoor Overhead termination complete with cable lugs & Armour clamping ring for 4 core copper cable 4 X 120 mm. sq.
C0147
  600/1000 V Outdoor Overhead termination complete with cable lugs & Armour clamping ring for 4 core copper cable 4 X 120 mm. sq.
C0148
  600/1000 V Outdoor Overhead termination complete with cable lugs & Armour clamping ring for 4 core copper cable 4 X 25 mm. sq.
C0149
  Deleted
C0150
  Accessories of Electrical Measuring Instrument: Shunts
C0151
  Electrical Actuators for Electrical Switches
C0152
  Adopters made of Brass Strip ( for electric lamps)
C0153
  All Aluminium Solid single Core Conductor to BS-2627H8 in coil form
C0154
  Aluminium Conductor #6 and #3 Duplex Phase - AC SR Neutral
C0155
  Auto Transformers above 100000 KVA, 3 Phase
C0156
  Auto Transformers above 25000 KVA upto 63000 KVA, 1 Phase
C0157
  Auto Transformers above 25000 KVA upto 63000 KVA, 3 Phase
C0158
  Auto Transformers above 63000 KVA upto 100000 KVA, 1 Phase
C0159
  Auto Transformers above 63000 KVA upto 100000 KVA, 3 Phase
C0160
  Electrical Wiring Accesseries/components wholly made of Brass
C0161
  Brass Strips for Electrical/ Electronics/ Telecommunication/ Defence application and radiators for automobile application
C0162
  Cast Resin Parallel Branch joints Box suitable for 4 x 185 sq.mm main cable and two branches of 4 x 185 sq.mm, XLPE/SWA/PVC, 600/1000 V cable
C0163
  Cast Resin Parallel joints Box suitable for 4 x 300 sq.mm main cable and two branches of 4 x 300 sq.mm, XLPE/SWA/PVC, 600/1000 V cable
C0164
  Cast Resin Straight joints suitable for 4 x 185 sq.mm, XLPE /SWA/PVC, 600/1000 V cable
C0165
  Cast Resin Straight joints suitable for 4 x 300 sq.mm, XLPE /SWA/PVC, 600/1000 V cable
C0166
  Cast Resin Straight through joints suitable for 4 x 70 sq.mm, XLPE /SWA/PVC, 600/1000 V cable
C0167
  Ceiling Exhaust Fan or Ceiling Extraction Fan
C0168
  Complete Ceiling fan with or without Metal Blades(36
C0169
  Complete Ceiling fan with or without Metal blades 48
C0170
  Complete Ceiling fan with or without Metal Blades(42
C0171
  Complete Ceiling fan (56
C0172
  Aluminium / Copper Conductor, XLPE Insulated, GI/Single Wire Armoured, PVC Sheathed Cable for 600/1000 Vof various sizes as given in Engg. Table No. 10
C0173
  Deleted
C0174
  Deleted
C0175
  Deleted
C0176
  CR/AL Thermo-couples
C0177
  Current Transformers above 245 KV (Outdoor Type)(Containing 275 kg of item 1, 280 kg of item 2, 150 kg of item 3, 400 & 150 kg of item 5 and 450 or 540 Ltr. of item 6)
C0178
  Current Transformers above 0.66 KV upto & including 12.5 KV (Indoor Type)(Containing 6.50 kg of item 1, 7 kg of item 2, 0.20 kg of item 3, 3 kg of item 4 and 5 kg of item 5)
C0179
  Current Transformers above 12.5 KV upto & including 24 KV (Indoor Type)(Containing 9 kg of item 1, 9 kg of item 2, 0.30 kg of item 3, 3 kg of item 4 and 10 kg of item 5)
C0180
  Current Transformers above 145 KV upto & including 245 KV (Outdoor Type)(Containing 170 kg of item 1, 145 kg of item 2, 100 kg of item 3, 270 & 100 kg of item 5 and 260 or 312 Ltr. of item 6)
C0181
  Current Transformers above 24 KV (Indoor Type)(Containing 12 kg of item 1, 12 kg of item 2, 0.50 kg of item 3, 4 kg of item 4 and 15 kg of item 5)
C0182
  Current Transformers above 36 KV upto & including 72.5 KV (Outdoor Type)(Containing 45 kg of item 1, 32 kg of item 2, 7.50 kg of item 3, 65 kg of item 5 and 60 or 72 Ltr. of item 6)
C0183
  Current Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 120 kg of item 1, 45 kg of item 2, 50 kg of item 3, 90 kg & 45 kg of item 5 and 185 or 222 Ltr. of item 6)
C0184
  Current Transformers upto & including 0.66 KV (Indoor Tyre)(Containing 1 kg of item 1, 1 kg of item 2, 0.05 kg of item 3 and 1 kg of item 4)
C0185
  Current Transformers upto & including 36 KV (Outdoor Type)(Containing 23 kg of item 1, 20 kg of item 2, 3.50 kg of item 3, 45 kg of item 5 and 35 or 42 Ltr. of item 6)
C0186
  Electric Door Bell
C0187
  A) Electric Lamp Caps (Aluminium)/GLS Caps B22D & E 27/27 (B)FTL Caps (G-13/35mm) (C) FTL Caps (G-13/24mm or 24.5mm)
C0188
  Electric Padestal Fan
C0189
  Electric Fan with Table Stand/ Wall Bracket
C0190
  Electrical Control Panels made of CRCA Sheets
C0191
  Electrical Copper Earthing Rods
C0192
  Electrical light Fittings with Glass, Switches and Holders
C0193
  Electrical Measuring instruments Type :Moving Iron Moving Coil Dynamo Meter Bimetallic Reed type, Namely Volt meter, Ammeter, frequency Meter, WATT meter, Multimeters, Insulation testers, Maximum Demand Indicator power, Factor meter
C0194
  Electrical Ovens made of CRCA Sheets
C0195
  Electrical Power HT Capacitors (All film design above 660 Volts up to 132 KV)
C0196
  Electrical Power HT Capacitors (mixed di-electric design) above 660 volts upto 132 KV
C0197
  Electrical Power LT Capacitor (Metalised Polypropylene di-electric design) up to 600 Volts
C0198
  Electrical Power LT Capacitors (All Polypropylene Film Design) upto 660 Volts
C0199
  Electrical Power LT Capacitors (Mixed dielectric design) up to 600 Volts
C0200
  Electrical Switch Boxes made of CRCA Sheet
C0201
  Electrical Wiring Accessories made of Aluminium
C0202
  Electrical Wiring Accessories made of Zinc
C0203
  Electrical Wiring Accessories made of copper/Copper Alloy & relevant finished parts made of plastic/steel
C0204
  Electromechanical Domestic appliances with self contained motor: Vacummizer set - One set consisting of Vacummizer Pump or vacumizer pump(UL approved) or/and Vacuseal container of relevant sizes
C0205
  Emergency Lamp
C0206
  Enamelled Copper Wire
C0207
  Exhaust Fan 12"/300MM Sweep Domestic
C0208
  Exhaust Fan 12"/300MM Sweep Industrial type
C0209
  Exhaust Fan 15"/380MM Sweep Industrial type
C0210
  Exhaust Fan 18"/450MM Sweep Industrial Type
C0211
  Exhaust Fan 24"/600MM Sweep Industrial Type
C0212
  Exhaust Fan 9"/225MM Sweep Domestic
C0213
  Fluorescent Circular Lamp (23W/32W)
C0214
  Fluorescent Tube (36 Watts and 40 Watts)
C0215
  Fluorescent Tubes (18 Watts and 20 Watts)
C0216
  Fractional horse power single phase case type construsction motor with cast iron or aluminium or sheet metal end cover - 0 Watts to 25 Watts
C0217
  Fractional horse power single phase case type construsction motor with cast iron or aluminium or sheet metal end cover - 26 Watts to 74 Watts
C0218
  Fractional horse power single phase case type construsction motor with cast iron or aluminium or sheet metal end cover - 75 Watts to 120 Watts
C0219
  Fractional horse power single phase case type construsction motor with cast iron or aluminium or sheet metal end cover - 121 Watts & above
C0220
  Galvanised Transmission Line/Telecom Towers & Parts thereof
C0221
  GLS Lamps (upto 100 Watts and below)
C0222
  H-3 Halogen Lamps 20W-130W/12V-24V
C0223
  H.P.M.V. Lamps (250 W)
C0224
  H.P.S.V Lamps (250 W)
C0225
  H.P.S.V Lamps Arc Tube (Burners) (150/250/400 W)
C0226
  H4 Halogen Lamps 45/40W to 130/90W (12 V to 24 V)
C0227
  Heater Coil/ tungsten Vaccum Metallizing Coils
C0228
  Heating Elements
C0229
  High Pressure Mercury Vapour Lamps (125 W)
C0230
  Inductors with Torroidal Windings
C0231
  Industrial Heater and Thermocouple
C0232
  Inline Copper Connectors
C0233
  Instant Water Heater
C0234
  Insulation Tube Heat Shrinkable (For sleeve conductor) 16 to 25 mm sq. Copper Conductor
C0235
  Insulation Tube Heat Shrinkable (For sleeve conductor) 70 to 120 mm sq. Copper Conductor
C0236
  Insulation Tube Heat Shrinkable (For sleeve conductor) 185 to 240 mm. sq. Copper conductor
C0237
  Intensifying Screens
C0238
  J Halogen Lamps 1000W/110V 260V
C0239
  J Halogen Lamps 1500W/2000W
C0240
  J Halogen Lamps 300W,500W,110V-260V
C0241
  Juicer Mixer Grinder with Stainless Steel Jar
C0242
  Deleted
C0243
  Deleted
C0244
  Marine Cable of different types and specifications as given in Engineering - Table 4
C0245
  Miniature Circuit Breakers & Isolators
C0246
  Molybdenum support wire
C0247
  MR-16 Halogen Lamps 20W-100W/6V-12V
C0248
  Multicore PVC insulated unarmoured/ armoured control purpose Copper Cable for Voltage up to 1000 V of different sizes as given in Engineering - Table 5
C0249
  Non Alloy Ground/Earthing Rods (Galvanised)
C0250
  Out door Weather Proof Light Fitting with Glass Shell/ Acrylic Cover
C0251
  Outdoor Over Head Termination Kits complete with Cable Gland and/or Bush, PVC Shroud And (with or without) Ring Lock Nuts
C0252
  Paper Covered Copper conductors (Strips/Wires)
C0253
  Plated Wires (Single/Stranded) (A) of Copper OR (B) of Copper Clad/Coated Steel OR (C) of Copper Alloy
C0254
  PTFE Insulated Wires and Cables with conductor diameter more than 0.5mm
C0255
  Deleted
C0256
  PVC 3 Core Flat Cable Suitable upto 1100 V of size - 3x1.5 sq.mm(22/.3) Overall Dimension = Width(mm)xThickness(mm) i.e. 12.8x6.0
C0257
  PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x2.5 sq.mm(36/.3)Overall Dimension = Width(mm)xThickness(mm) i.e. 14.6x6.4
C0258
  PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x4.0 sq.mm(57/.3) Overall Dimension = Width(mm)xThickness(mm) i.e. 17.2x7.4
C0259
  PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x6.0sq.mm(85/.3)overall Dimension = Width(mm)xThickness(mm) i.e. 18.7x7.9
C0260
  PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x10.0 sq.mm(140/.3) overall dimension =width(mm)xThickness(mm) i.e. 23.7x9.9
C0261
  PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x16.0 sq.mm(226/.3) overall Dimension =width(mm)xThickness(mm) i.e. 28.0x11.4
C0262
  PVC 3 Core Flat Cable Suitable upto 1100 V of size - 3x25.0 sq.mm(334/.3) Overall Dimension = Width(mm)x Thickness(mm) i.e. 35.5x14.7
C0263
  PVC 3 Core Flat cable Suitable upto 1100 V of size - 3x35.0 sq.mm(493/.3) overall Dimension = Width(mm)xThickness(mm) i.e. 39.5x16.2
C0264
  PVC 3 Core Flat Cable Suitable upto 1100 V of size - 3x50.0 sq.mm(703/.3) Overall Dimension = Width(mm)xThickness(mm) i.e. 45.5x18.3
C0265
  PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x70.0 sq.mm(440/.45) Overall Dimension = Width(mm)xThickness(mm) i.e. 51.0x20.0
C0266
  PVC 3 Core Flat Cable Suitable upto 1100 V of size- 3x95.0 sq.mm(485/.50) Overall Dimension = Width(mm)xThickness(mm) i.e. 60.0x23.5
C0267
  PVC Insulated Power Cable with Copper Conductor Unarmoured for Voltage upto 1000 V - Size: 3 Core x 1 Sq.mm
C0268
  PVC Insulated Power Cable with Copper Conductor Unarmoured for Voltage upto 1000 V - Size: 3 Core x 0.75 Sq.mm
C0269
  PVC Insulated Power Cable with Copper Conductor Unarmoured for Voltage upto 1000 V - Size: 3 Core x 0.50 Sq.mm
C0270
  PVC Insulated Power Cable/ L.T PVC Cables of various sizes with Copper/ Aluminium Conductors unarmoured/ armoured for Voltage upto 1000 V of different sizes as given in Engineering - Table 6
C0271
  PVC Insulated Triple Core mining cable for voltage upto 1100 V of different sizes as given in Engineering - Table 7
C0272
  PVC Insulated Triple Core mining cable for voltage upto 3300 V of different sizes as given in Engineering - Table 8
C0273
  R Core (Round Shaped, Strip Wound Core)
C0274
  Radiators for Transformers (made out of CRCA Steel Sheet/ Coil
C0275
  Rectifier tanks made of CRCA Sheets
C0276
  Reflector for 40 W Twin Tube Box Type Industrial Fitting duly prewired with vaccum pressure impregnated copper wound open type Ballast , Power Factor Improvement Capacitor, Starter, Starter Seat,Mains Terminal and Lamp Holders
C0277
  Screen Insulation Sleeve System
C0278
  Single Phase Electrical Energy Meter
C0279
  Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition
C0280
  Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition
C0281
  Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition
C0282
  Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition
C0283
  Single Phase Transformers above 100000 KVA
C0284
  Single Phase Transformers above 25000 KVA upto 63000 KVA
C0285
  Single Phase Transformers abvoe above 63000 KVA upto 100000 KVA
C0286
  Squirrel cage flame proof motor suitable for upto & including 660 V, 3 Phase, AC supply - 7.5 KW to 22.4 KW
C0287
  Squirrel cage flame proof motor suitable for upto & including 660 V, 3 Phase, AC supply - 22.5 KW to 56.0 KW
C0288
  Squirrel cage flame proof motors suitable for upto & including 660 V, 3 Phase AC supply - 0 KW to 0.75 KW
C0289
  Squirrel cage flame proof motors suitable for upto & including 660 V, 3 Phase, AC supply - above 0.76 KW to 7.4 KW
C0290
  Squirrel cage screen protected (SP)/ Drip proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply - 0.76 KW to 7.4 KW
C0291
  Squirrel cage screen protected (SP)/ Drip proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply - 7.5 KW to 22.4 KW
C0292
  Squirrel cage screen protected (SP)/ Drip proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply - 22.5 KW to 74.0 KW
C0293
  Squirrel cage screen protected (SP)/ Drip Proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply - 75.0 KW to 374 KW
C0294
  Squirrel cage screen protected (SP)/ Drip Proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply - 375 KW & above
C0295
  Squirrel cage screen protected (SP)/Drip Proof (DP) Motors suitable for upto & including 660 V, 3 Phase, AC supply - 0 KW to 0.75 KW
C0296
  Stainless Steel Cable Ties made of SS316 Grade
C0297
  Stamping (statorr & Rotor sets) for Electric Motors
C0298
  Starter Motor Armature for High Speed Vehicles Cars etc.
C0299
  Stator for Alternator for Heavy Duty (12 Volts 105-190 Amps)
C0300
  Stator for Alternator for Medium Duty (12 Volts 95-105 Amps)
C0301
  Steel Welding Electrodes made of Mild Steel/ Stainless Steel
C0302
  Street Lighting Fittings suitable for 40 W F.T.L. duly prewired with vaccum pressure impregnated copper wound open type Ballast, Power Factor Improvement Capacitor, Starter, Starter Seat, Mains Terminal and Lamp Holders
C0303
  Deleted
C0304
  Deleted
C0305
  Deleted
C0306
  Deleted
C0307
  Deleted
C0308
  Thermocouple Cartridges of Platinum/Platinum Rhodium Alloy
C0309
  Thermocouple Cartridges of PT/PT-13% RH (type-R) Mark VII OR
C0310
  Three Jar Mixer with Stainless Steel Jar for Kitchen appli- cation
C0311
  Three Phase Electrical Energy Meter
C0312
  Tin Plated HDHC Copper Bus Bar or Electrolytic Grade Tin Plated Copper Bus Bars or Tinned Copper Strips/ Flats
C0313
  Tinned Copper Terminal Ends
C0314
  Tinsel Conductor (Flat/Copper/Copper Alloy Conductors Spun with High Tenacity Polyester Filament Yarn)
C0315
  Totally enclosed fan cooled slip ring induction motors suitable for upto & including 660 V, 3 Phase, AC supply - 0 KW to 37 KW
C0316
  Totally enclosed fan cooled slip ring induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 37.5 KW to 75 KW
C0317
  Totally enclosed Fan Cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 0 KW to 0.75 KW
C0318
  Totally enclosed fan cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 0.76 KW to 7.4 KW
C0319
  Totally enclosed fan cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 7.5 KW to 22.4 KW
C0320
  Totally enclosed fan cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 22.5 KW to 56.0 KW
C0321
  Totally enclosed fan cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 57.0 KW to 374 KW
C0322
  Totally enclosed fan cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 375 KW & above
C0323
  Transformer Laminations/cut core made of CRGO
C0324
  Transformers (Aluminium Wound) above 100 KVA upto & including 400 KVA, 3 Phase, Oil Cooled
C0325
  Transformers (Aluminium Wound) upto & including 100 KVA 3 Phase, Oil Cooled
C0326
  Transformers (Copper Wound) above 100 KVA upto & including 400 KVA, 3 Phase, Oil Cooled
C0327
  Transformers (Copper Wound) above 10000 KVA upto & including 25000 KVA, 3 Phase, Oil Cooled
C0328
  Transformers (Copper Wound) above 100000 KVA , 3 Phase, Oil Cooled
C0329
  Transformers (Copper Wound) above 1600 KVA upto & including 4000 KVA, 3 Phase, Oil Cooled
C0330
  Transformers (Copper Wound) above 25000 KVA upto & including 63000 KVA, 3 Phase, Oil Cooled
C0331
  Transformers (Copper Wound) above 400 KVA upto & including 1600 KVA, 3 Phase, Oil Cooled
C0332
  Transformers (Copper Wound) above 4000 KVA upto & including 10000 KVA, 3 Phase, Oil Cooled
C0333
  Transformers (Copper Wound) above 63000 KVA upto & including 100000 KVA, 3 Phase, Oil Cooled
C0334
  Transformers (Copper Wound) upto & including 100 KVA, 3 Phase, Oil Cooled
C0335
  Transformers above 400 KVA upto and including 1600 KVA (Aluminium Wound)
C0336
  Tungsten Filaments for GLS Lamps upto 100 watts and below
C0337
  TV Antenna Motors
C0338
  Unplated Conductors of Copper
C0339
  Voltage (Potential) Transformers above 0.66 KV upto & including 12.5 KV (Indoor Type)(Containing 16 kg of item 1, 2.50 kg of item 2, 1 kg of item 3, 3 kg of item 4 and 7 kg of item 5)
C0340
  Voltage (Potential) transformers above 12.5 KV upto & including 24 KV (Indoor Type)(Containing 20 kg of item 1, 4.50 kg of item 2, 2 kg of item 3, 3 kg of item 4 and 11 kg of item 5)
C0341
  Voltage (Potential) Transformers above 145 KV (Outdoor Type)(Containing 200 kg of item 1, 45 kg of item 2, 50 kg of item 3, 175 kg of item 5 and 180 or 216 Ltr. of item 6)
C0342
  Voltage (Potential) Transformers above 24 KV (Indoor Type)(Containing 25 kg of item 1, 5.50 kg of item 2, 3 kg of item 3, 5 kg of item 4 and 18 kg of item 5)
C0343
  Voltage (Potential) Transformers above 36 KV upto & including 72.5 KV (Outdoor Type)(Containing 69 kg of item 1, 9 kg of item 2, 18 kg of item 3, 78 kg of item 5 and 45 or 54 Ltr. of item 6)
C0344
  Voltage (Potential) Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 125 kg of item 1, 27 kg of item 2, 40 kg of item 3, 115 kg of item 5 and 155 or 186 Ltr. of item 6)
C0345
  Voltage (Potential) Transformers upto & including 0.66 KV (Indoor Type)(Containing 7 kg of item 1, 1.50 kg of item 2, 0.50 kg of item 3, 3 kg of item 4 and 7 kg of item 5)
C0346
  Voltage (Potential) Transformers upto & including 36 KV (Outdoor Type)(Containing 26 kg of item 1, 7 kg of item 2, 4 kg of item 3, 45 kg of item 5, 8 kg of item 6 and 30 & 36 Ltr. of item 7)
C0347
  XLPE Cable joint (Heat Shrinkable) size 3 X 95 mm. sq
C0348
  Metal Oxide gapless lightining Arrester of different rating (containing different Nos. of discs)
C0349
  Stainless Steel coupling/tees/Elbows
C0350
  Alloy Steel Rough Castings
C0351
  Automotive Casting (Machined) above 100 kgs pc weight
C0352
  Automotive Casting (Machined) above 10 kgs. and upto 100 kgs pc weight
C0353
  Automotive Casting (Machined) upto 10 kgs pc weight
C0354
  Automotive Casting (Rough)
C0355
  Bright bar & Shaftings made from magnetic/ Nonmagnetic stainless steel
C0356
  Bright bars and shafting other than those made from MS and Stainless Steel
C0357
  Bright bars made out of mild steel
C0358
  Carbon Steel/Non Alloy Steel/Alloy Steel/Stainless Steel Forgings(Machined) above 10 kgs. Pc. Weight Upto 100 kg. Pc. Weight
C0359
  Carbon Steel/Non Alloy Steel/Alloy Steel/Stainless Steel Forgings (Machined) above 100 kgs. Pc. Weight
C0360
  Carbon Steel/Non Alloy Steel/Alloy Steel/Stainless Steel Forgings (Machined) Upto 10 kgs. Pc. Weight
C0361
  Carbon Steel/Non Alloy Steel/Alloy Steel/Stainless Steel Forgings (Rough)
C0362
  Casing Pipes conforming to API, Specification 5CT or equivalent of OD 114 mm to 508 mm (4 and 1/2
C0363
  Cast Iron Spun Pipes
C0364
  Cast Iron Wheel
C0365
  Cold Rolled painted/ coated High Tensile steel strapping
C0366
  Drill Pipes of OD 60.325 mm to 168.275 mm OD equivalent to 2-3/8
C0367
  File Blanks (made of Alloy Steel)
C0368
  Forged Crankshaft (Made of Alloy/Non-Alloy Steel)
C0369
  Forged-Rolled Carbon Steel Tyres for Railway, Carriage and Wagon, Lo-comotive & Tramcar
C0370
  Front Axle Beam-Forgings
C0371
  Galvanised Steel Stranded Wire (Wire Strand)
C0372
  Ground Rod made out of Stainless Steel Scrap
C0373
  High tensile precision Fastners Cold/ Hot forged Bolts/ Screws-All varieties
C0374
  High tensile precision Fastners Cold/ Hot forged Nuts-All varieties
C0375
  Hot forged nuts
C0376
  Investment Casting of Non-Alloy Steel/Alloy Steel including Stainless Steel
C0377
  Iron Casting (Machined) above 10 kg & upto 100 kg pc wt (not elsewhere specified)
C0378
  Iron Casting (Machined) above 100 kg pc wt (not elsewhere specified)
C0379
  Iron Casting (Machined) upto 10 kg pc wt (not elsewhere specified)
C0380
  Iron Casting (Rough), not elsewhere specified
C0381
  Deleted
C0382
  Manganese Steel Rough Castings
C0383
  Manhole Cover
C0384
  Non Alloy Steel Rough Castings
C0385
  Non-Alloy Steel - Flanges/Couplings/ Tees/Elbows
C0386
  Non-Alloy Steel Forgings
C0387
  Non-Alloy Steel forgings(Rough)
C0388
  Nuts Milled from bar process
C0389
  Painted Slotted Angles
C0390
  Powrah/Hoe/Pick-axe/Kudali/Pick Mattock/ Cutter Mattock/ Trowel/Transplantor /Fork/Cultivator/Weeder/Bulb Planter/Combination Tool made of Non Alloy Steel/ Alloy Steel (including Stainless Steel). Without handle or with handle made of PP and FRP or wood
C0391
  Production tubing of OD 60.325 mm to 114.3mm OD equivalent to 2-3/8
C0392
  Sanitary Castings
C0393
  Spheroidal Graphite/ Malleable/Ductile iron castings (Rough)
C0394
  Stainless Steel Rough Castings
C0395
  Steel backed tin based white metal (babbit) alloy bimetal strip generally confirming to SAE 12 or equivalent
C0396
  Deleted
C0397
  Thermostatic type Bimetal/Trimetal Strip of Various Grades and parts thereof
C0398
  Cast Iron Weights
C0399
  Alloy Steel Hack-Saw Blades
C0400
  Cast Iron Vice
C0401
  Chisels made of forging quality carbon steel
C0402
  Coil spring Expander for Piston Ring (Round)
C0403
  Cut off Blades made out of High Speed Steel Cobalt/Non-Cobalt Grade
C0404
  Diamond Impregnated Segments - Big Block Cutter: Segmented Circular/ Frame saw blade dia 1600mm to 3500mm fitted with diamond impregnated segments
C0405
  Diamond Impregnated Segments - Block Cutter-Single Blade: Segmented Circular/ Frame saw blade dia 900mm to 1500mm fitted with diamond impregnated segments
C0406
  Diamond Impregnated Segments - Multi Blade Single Spindle Tiling Cutters/ Saws/ Blades - Segmented Circular saw blade of various sizes fitted with Diamond Impregnated Segments
C0407
  Diamond Impregnated Segments - Slabbing and Edge Cutting: Segmented Circular/ frame saw blade dia 200mm to 850mm fitted with diamond impregnated segments
C0408
  Diamond Impregnated Segments - Slabbing and Edge cutting Diamond Impregnated segments for circular saw dia 200 mm to 850 mm
C0409
  Diamond Impregnated Segments -Other Segmented Circular Saw/Frame Saw blade not covered under items at Sl. No. 404 to 407
C0410
  Diamond Impregnated Segments: Big Block Cutter Diamond Impregnated segments for circular saw dia 1600 MM to 3500 mm
C0411
  Diamond Impregnated Segments: Block cutter-single blade Diamond Impregnated segments for circular saw dia 900 mm to 1500 mm
C0412
  Diamond Impregnated Segments: Multiblade Single Spindle Tilling Cutters/ Saws/ Blades - Diamond impregnated Segments of various sizes
C0413
  Diamond Impregnated Segments: Other Diamond impregnated segments not covered under items at Sl.Nos. 408,410 to 412
C0414
  Drop forged Pliers of Alloy/ Non-alloy steel
C0415
  Hacksaw Frame
C0416
  Hand Drill
C0417
  High Speed Steel Square, Rectangular and Round Cobalt & Non-Cobalt Grade Tool Bits of Cross Sectional Area less than or equal to 150 mm2
C0418
  High Tensile precision Industrial Wrenches/Socket kays of different cross section
C0419
  Jigsaw Blades/ Sabresaw Blades/Body Saw Blades
C0420
  PCB Drills made from composite blanks of stainless steel and Tungsten Carbide of Drill Diameter, 0.3 MM to 1.5 MM
C0421
  PCB Drills of Solid Tungsten Carbide of Diameter, 0.2 MM to 1.5 MM
C0422
  Pipe Wrenches
C0423
  Punches
C0424
  Scissors
C0425
  Screw Drivers (Nickel plated)
C0426
  Spanners made of alloy/ Non-alloy steel
C0427
  Stainless Steel Rules of variety 'x' (manufactured by photo chemicals machining process)
C0428
  Steel files of Alloy Steel
C0429
  Steel files of High Carbon Steel
C0430
  Steel Tapes/Rules (1 mtr. to 50 mtrs.)
C0431
  Steel Vices
C0432
  Automatic Socks Knitting Machine (Mechanical)
C0433
  Card Wires
C0434
  Circular Knitting Pins (Aluminium)
C0435
  Computerised Automatic Power Socks Knitting Machine
C0436
  Contour Tape
C0437
  Cylinder Wires
C0438
  Doffer Wires
C0439
  ENDCAP
C0440
  Flat Tops
C0441
  Hydraulic End Cap
C0442
  Hydraulic Press
C0443
  Injection moulding machine parts: Deckel /Cover
C0444
  Injection Piston
C0445
  Lincker-in-Wires
C0446
  Plastic Extrusion Plants & Machineries Rigid PVC & HDPE Pipe Plant, Bag Maker Machine, Film Plants such as PP/HM/HDPE/LD/LLD/PVC Film Plant, Tape Plant, LD Foam film Plant, Extrusion Plant, Single Screw Plant, Mixer, Cooler, PVC Wire & Cable/Spring coating plant with/without caterpillar, Single spin
C0447
  Plates Injection cylind
C0448
  Ring Frame drafting system
C0449
  Speed Frame Drafting System
C0450
  Stainless Steel Pressure Vessels made of AISI 316/L304 (Non-Magnetic)
C0451
  Tail Stocks made of Steel
C0452
  Textile Machinery Spare parts perforated Nickel Screen
C0453
  Textile Spindle upper part
C0454
  Textile spindle with insert
C0455
  Thrust housing made of Steel
C0456
  390 KV Surge Arresters/Lightining Arresters
C0457
  75 Inoculant (Si - 70-76%) Ca - 0.6-1.0%, Al - 0.6-1.0%, Fe - 22-27%
C0458
  Alloy Steel (Other than Stainless Steel) Wires (from melting scrap)
C0459
  Alloy steel (other than stainless steel and High speed steel), Bars and Rods (including Rounds, Flats, Hexa- gons, Octagons, Wire Rods etc), Angles, Shapes & Sections (including Special Profiles), Plates /Sheets/Strips/ Wide coils/Blooms/Billets/Slabs/Ingots containing 2% or more alloying elements
C0460
  Alloy Steel (other than Stainless Steel) Bars & Rods(including Rounds, Flats, Wire Rods etc.), Angles, Shapes & Sections (including Special Profiles)
C0461
  Deleted
C0462
  Alumina Carbon Bricks/Shapes and/or Ramming Mass, Castables and Mortars
C0463
  Alumina Carbon Continuous Casting Refractories and/or Mortars
C0464
  Alumina Carbon/ Slide Gate Plate Refractory and Attachments
C0465
  Alumina Fused Cast Refractories
C0466
  Chrome Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars
C0467
  Coal based Direct Reduced Iron (Briquetted Iron/ Sponge Iron)
C0468
  Cobalt Base Hard Facing Alloy Wire Rods
C0469
  Cold Rolled Galvanised Colour Coated Non Alloy Steel Sheets/Hoops & Strips/Wide Coils (Plain/Corrugated) having coating thickness of Primer 4-10 Micron, Backer 4-14 Micron and Top Coat 12-28 Micron
C0470
  Cold Rolled Full Hard/ Cold Rolled Close Annealed (without skin passed/ temper passed) Non-Alloy/Alloy Steel (excluding Stainless Steel) Sheets/ Hoops and Strips/ Wide Coils
C0471
  Cold Rolled Close annealed (CRCA) Skin Passed/ Temper passed (including Half Hard, Quarter Hard) Non-Alloy/ Alloy Steel (excluding Stainless Steel) sheets/ Hoop and Strips/ Wide coil
C0472
  Cold Rolled Galvanized/Galvannealed (Plain/Corrugated) Non Alloy Steel Sheets/Strips/Wide Coils
C0473
  Cold Rolled Galvanized/Galvannealed (Plain/Corrugated) Non Alloy Steel Sheets/Strips/Wide Coils
C0474
  Electrolytic Tin Plate
C0475
  Ferro Chrome containing by weight minimum 60% Chromium and maximum 1.5% Carbon produced by Silico Thermic Reduction Process
C0476
  Ferro Chrome/ Charge Chrome containing by weight more than 4% Carbon
C0477
  Ferro Manganese (Fe Mn)
C0478
  Ferro Molybdenum (60-65% Molybdenum
C0479
  Ferro Silicon (Fe Si)
C0480
  Ferro Vanadium (50-55% Vanadium)
C0481
  Ferro Vanadium (75-80% Vanadium)
C0482
  Cold Rolled Galvanised Non Alloy Steel Sheets/hoops & Strips/Wide Coils
C0483
  Gas based direct reduced iron (Hot Briquetted Iron/ Sponge Iron)
C0484
  Deleted
C0485
  Graphite electrode/ Carbon electrode/ Anodes/ Nipples/ Graphite Fine and Mix Graphite Products
C0486
  High Alumina (Bubble Alumina Based) Bricks & Shapes and/or Castable and Mortars
C0487
  High Alumina (Synthetic Base) Bricks/Shapes and/or Ramming Mass, Castables and Mortars
C0488
  High Alumina Blast Furnace Stove Bricks/ Shapes and Mortars
C0489
  High Alumina Bricks and Shapes and/or Ramming Mass, Castables and Mortars
C0490
  High Alumina Refratory for Hearth
C0491
  High Chrome Castings for Cement Grinding Mills (Composition: Cr.30-32%, Moly- 2.5- 3%, Si 1.5-2.5% and C- 1.5-2.5%, Balance - Iron)
C0492
  High Speed Steel (cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products
C0493
  High Speed Steel (Non Cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products
C0494
  Hot Metal/Pig Iron
C0495
  Hot Rolled (Pickled/unpickled) Non Alloy/Alloy/Stainless Steel Plates/Sheets/ Strips/Wide Coils
C0496
  Industrial/ Sanitary Iron Castings (Blast Furnace Route)
C0497
  Iron Ore pellets (from Limonite Ore)
C0498
  Iron Ore Pellets. (from Haematite Ore)
C0499
  Magnesia Carbon Bricks/Shapes and/or Ramming Mass, Castables and Mortars
C0500
  Magnesia Dolomite Bricks and Shapes and/or Ramming Mass, Castables and Mortars
1
 
 
Discussion Forum
what is new what is new
 


Let's just recapitulate:

|| Home || About us || Feedback || Contact us || Disclaimer || Terms of Use || Privacy Policy || TMI Database || Members ||

© Taxmanagementindia.com [A unit of MS Knowledge Processing Pvt. Ltd.] All rights reserved.