TMI BlogAmendments/Corrections/Addition in SIONX X X X Extracts X X X X X X X X Extracts X X X X ..... ing entry at SI.No.A-2386, the new entries from SI.No.A-2387 to A-2402 shall be added as per Annexure "B" to this Public Notice. ENGINEERING PRODUCTS After the existing entry at SI.No.C-1500, the new entries from SI.No.C-1501 to C-1517 shall be added as per Annexure "C" to this Public Notice. This issues in Public interest. Sd/- (N.L. Lakhanpal) Director General of Foreign Trade Annexure "A" to the Public Notice No.51 Dated: 01/03/2000 AMENDMENTS/CORRECTIONS Sl.No. Page No. Reference Amendments/Corrections (1) (2) (3) (4) 1. 10 Chemicals Allied Products Sl.No.A35 The description of the import item at Sl. No. 4 shall be amended (without any change in the quantity) to read as under:- "BIS TRIMETHYL SILYL UREA" 2. 12 Chemicals Allied Products Sl.No.A48 The description and quantity of the import item at Sl. No. 1(a) shall be amended to read as under:- "PIPERAZINE WATER SOLUTION (ON 100% BASIS) 2.21 kg." 3. 24 Chemicals Allied Products Sl.No.A111 The description of the import item at Sl. No. 4 shall be amended ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Item of Export Qty. Item of Import Qty. Allowed A2027 Cefotaxime Sodium Sterile USP/BP 1 kg 1. 7-ACA 0.741 kg. 2. Mercapto Benzo Thiazole-4-YL-2 (2-Amino Thiazolyl) Methoxy Imino Acetate (MAEM) OR 1.025 kg. i) Ethyl Aceto Acetate 0.965 kg. ii)Potassium Carbonate 1.44 kg. iii)Bromine 0.76 kg. iv)Triphenyl Phosphine 1.23 kg. v)Vulkacit Acid 1.49 kg. 3. Methylene Chloride 5.20 kg. 4. Isopropyl Alcohol 4.68 kg. 5. Acetone 1.51 kg. 6. Methanol 5.23 kg. 7. Formic Acid 1.19 kg. 8. Triethyl Amine 0.41 kg. 9. Ethyl Hexanate/ 2-Ethyl Hexanoic acid 0.40 kg. 13. 15 Chemicals Allied Products Sl.No.A2263 ( As amended vide Public Notice No. 26 dt. 04.08.99) The description of the import item at Sl. No. 6 shall be amended (without any change in the quantity) to read as under:- "2-METHOXY PROPANE" 14. 17 Chemicals Allied Products Sl.No.A2293 ( As amended vide Public Notice No. 37 dt. 01.11 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... printed instead of Crawn made of Tin Free sheet/Tin plate prime with double ring dry blend lining printed 22. 644 Engineering Products Sl.No.C1175 The norm covered by this entry shall be substituted by the following:- Sl.No. Item of Export Qty. Item of Import Qty. Allowed C1175 Condensor/Evaporator Coils used as Heat exchangers for Airconditioning and Refrigerator purpose. 1 kg 1. Copper Tubes refrigeration Quality-Dia 1/4"-1/2" 1.05 kg/kg content in export product 2. Aluminium Fin Stock thickness 0.10 mm to 0.20 mm 1.10 kg/kg content in export product 3. Brazing materials 0.5% of FOB value 4. U Bends and Tripods net to net. 23. 667 Engineering Products Sl.No. C1327 Norm covered by this entry shall be substituted by the following:- Sl.No. Item of Export Qty. Item of Import Qty. Allowed C1327 Auto Transformer ( variable voltage ) (a) upto 30 KVA 1 phase or 90 KVA 3 phase 1 No. 1. CRGO steel laminations/ sheets/ Coil/Slits/Cuts 2 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ts Sl.No.K124 (Introduced vide Public Notice No. 46 dated : 03/01/2000) CORRIGENDUM The quantity of import item at Sl. No. 4 shall be corrected as under:- "0.183 Sq. Mtrs." Annexure "B" to the Public Notice No.51 Dated: 01/03/2000 CHEMICALS AND ALLIED PRODUCTS Sl.No. Item of Export Qty. Item of Import Qty. Allowed A2387 FMOC-ONSU (9-Fluorenyl Methyl Succinimidyl Carbonate) 1 kg 1. Fluorene 2.14 kg. 2. Dimethyl Formamide 3.22 kg. 3. N-Hydroxy Succinimide OR 1.12 kg. 3. a) Succinahydride 1.60 kg. 3. b) Hydroxylamine HCI. 1.28 kg. 4. Ethyl Formate 1.91 kg. A2388 CIPROFLOXACIN LACTATE MONOHYDRATE 1 kg 1. 2,4 Dichloro 5-Fluoro Acetophenone 1.54 kg. 2. Dimethyl Carbonate 1.74 kg. 3. Sodium Hydride 0.52 kg. 4. Dimethyl Formamide 1.74 kg. 5. Potassium Carbonate 1.14 kg. 6. Cyclo Propyl Amine 0.30 kg. 7. Piperazine Anhydride 0.798 kg. A2389 2-Mercapto-5-Methoxy Benzimidazole 1 k ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... e) 1 kg 1. 4- (3 Amino Propyl) Morpholine 0.600 kg. 2. BON Methyl Ester 0.841 kg A2401 (S)-Valine-Cyclic Urea (Wing B) 1 kg 1. (L)-Valine or (S) Valine 1.837 kg. 2. Aerylonitrile 0.95 kg. 3. Methyl Chloroformate 2.25 kg. A2402 Potassium Pyro Antimonate 1 kg 1. Antimony Trioxide 0.978 kg. 2. Potassium Hydroxide 0.300 kg. Annexure "C" to the Public Notice No.51 Dated: 01/03/2000 ENGINEERING PRODUCTS Sl.No. Item of Export Qty. Item of Import Qty. Allowed C1501 Low Carbon Ferro Manganese 1 MT 1. Aluminium Ingot/ Aluminium Powder 500 kg. C1502 Medium Carbon Ferro Manganese 1 MT 1. Aluminium Ingot/ Aluminium Powder 250 kg. C1503 Continuous Cast Copper Rod/ Cathodes 1 MT 1. Copper concentrate 1.06 MT/MT of Copper content in the export product. C1504 Cold Rolled Non Grain oriented Silicon electrical Steel Sheets/ coils in fully/ semi processed state. 1000 kg. 1. Hot Ro ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 1. Pig Iron 1.25 kg Note: The above norms are for the export product wholly made of Pig iron. For the export product constituting Pig Iron less than 100% and upto 90% by weight, the import requirement of Pig iron shall be proportionately reduced. C1509 Identifiable ready to use machined parts/ components made wholly or predominantly of Carbon Steel / Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified. 1 MT 1. Major Raw materials comprising of : Carbon Steel / Non-Alloy Steel Melting Scrap 1700 kgs. 2. Additives comprising of: a) Core Wire/Scrap/ Ingots/Shots of Aluminium b)Core Wire/Lumps Powder of Calcium Silicide (CaSi) c) Lumps / Powder of Misch Metal d) Ferro Silicon e) Ferro Manganese 50 kgs 3. Miscellaneous items: a) i) Resin Coated Sand 450 kgs 3. a) ii) Organic binders 200 kgs. 3. b) i) Graphite electrode 7.5 kgs. 3. b) ii) Welding Electrode 12.5 kgs. 3. b) iii) Mould Wash/ Mould coat 31 kgs. 3. b) iv) Grinding Wheel 6 kgs. 3. b) v) Refractories: a) ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... l X-Ray Film (various Grades for Gamma Rays Iridium 192 Cobalt 60) 9440 Sq. cm. 4. Furnace Oil/ Diesel Oil for i) Ladle Heating ii) Mould Heating iii) Heat treatment 265 Ltrs. C1511 Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified. 1 MT 1. Major Raw Materials comprising of: a) Stainless Steel Melting Scrap 862.5 kg 1. b) Iron Flakes/ Pure Iron/ Iron Powder 387.5 kg. 1. c) i) Ferro Chrome ii) Charge Nickel Oxide Sinter/ Ferro Nickel OR 400 kg. 1. c) i) Ferro Chrome 87.5 kg. 1. c) ii) Nickel 125.0 kg. 1. c) iii)Ferro Manganese 12.5 kg. 1. c) iv) Ferro Molybdenum 62.5 kg. 1. c) v) Ferro Silicon 25 kg. 2. Additives comprising of: a) Core wire/Scrap/ Ingots/ shots of Aluminium b) Core wire/ Ingots/ powder of Calcium silicide (CaSi) c) Selenium d) Lumps/Powder of Misch Metal 6.25 kg. 3. Miscellaneous items a) i) Resin coated Sand 1562.5 kg. 3. a ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 10. Relevant Filter Drier(Copper) 1 No. 11. Relevant Evaporator (cu tube, A1 fin) 1 No. 12. Relevant Condensor (cu tube, A1 fin) 1 No. C1513 Pneumatic Tool-Clay Digger (Picks) with outside Trigger, Throttle Latch Retainer 1 No. 1. Relevant Air Inlet Nipple 1 No. 2. Relevant Head Bolt 1 No. 3. Relevant Piston 1 No. 4. Relevant Cylinder 1 No. 5. Relevant Fronthead 1 No. 6. Relevant Throttle Valve 1 No. 7. Relevant Latch Retainer Bolt 1 No. 8. Relevant Valve Block 1 No. 9. Relevant Valve 1 No. 10. Relevant Chuck bushing 1 No. 11. Relevant Retainer-Latch 1 No. 12. Relevant Lever-Throttle Valve 1 No. 13. Relevant Handle Assembly 1 No. 14. Relevant Latch Ret Bolt Bushing 1 No. Note : The import of components shall be allowed on net to net basis with accountability clause. C1514 Pneumatic Tool-Light Simplate Valve Temper with Bore and Stroke size 17/16" X 6" (36.5mm X 152.45 mm) 1 No. ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... mmer 1 No. 1. Relevant Valve 1 No. 2. Relevant Throttle valve lever 1 No. 3. Relevant Throttle Valve Bushing 1 No. 4. Relevant Cylinder Head 1 No. 5. Relevant Upper Valve Case Lid 1 No. 6. Relevant Valve Case 1 No. 7. Relevant Lower Valve Case Lid 1 No. 8. Relevant Piston Plug Assembly 1 No. 9. Relevant Cylinder Bushing Assembly 1 No. 10. Relevant Bushing 1 No. 11. Relevant Piston Packing 1 No. 12. Relevant Piston Bushing 1 No. 13. Relevant Check Nut 1 No. 14. Relevant retainer 1 No. 15. Relevant Rubber Butt 1 No. Note : The import of components shall be allowed on net to net basis with accountability clause. C1517 Pneumatic Tool Clay Digger round (picks) with outside trigger Sleeve Retainer and round/Square Chuck 1 No. 1. Relevant Cylinder 1 No. 2. Relevant Sleeve 1 No. 3. Relevant Handle Bush Assembly 1 No. 4. Relevant Lever 1 No. 5. Relevant Lever Pin ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
