9911796707
TMI BlogAmendments to the list of (SCOMET) as given in Appendix 3 to Schedule 2 of ITC(HS)X X X X Extracts X X X X X X X X Extracts X X X X ..... of items under this category, as notified by this Department vide Notification No 2/2004-2009 dated 31.8.2004 shall continue to be in force. 4. This issues in Public interest. (K.T.CHACKO) DIRECTOR GENERAL OF FOREIGN TRADE AND EX-OFFICIO ADDITIONAL SECRETARY TO THE GOVT. OF INDIA (Issued from File No. 01/91/171/14/AM06/PC.III) File No. 01/91/171/14/AM06/PC.III ( S.K.SHRIVASTAVA) DEPUTY DIRECTOR GENERAL OF FOREIGN TRADE APPENDIX-3 Special Chemicals, Organisms, Materials, Equipment and Technologies (SCOMET) export of which is regulated Note: Please see the Policy Statement at Code No. 0005 in table A of Schedule 2 of the ITC (HS) Classifications of Export and Import Items. Export of Special Chemicals, Organisms, Materials, Equipment and Technologies (SCOMET) listed below shall be permitted only against an export licence issued in this behalf unless export is prohibited or is permitted without licence subject to fulfilment of conditions, if any, as indicated under/against any specific category or item. Exporters are advised to refer to the relevant guidelines relating to the export of SCOMET items in the Handbook of Procedures (Vol.I), as issued from time to time. Glossary ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... s, except as otherwise provided for against any item in the SCOMET List, information (including information embodied in software) other than information in the public domain, that is capable of being used in: a. the development, production or use of any goods or software; b. the development of, or the carrying out of, an industrial or commercial activity or the provision of a service of any kind. Explanation: When technology is described wholly or partly by reference to the uses to which it (or the goods to which it relates) may be put, it shall include services which are provided or used, or which are capable of being used, in the development, production or use of such technology or goods. "Specially designed" qualifies the description of equipment, parts, components or "software" which, as a result of "development", have unique properties that distinguish them for certain predetermined purposes. For example, a piece of equipment that is "specially designed" will only be considered so if it has no other function or use. Thus a piece of manufacturing equipment that is "specially designed" to produce a certain type of component will only be considered such if it is not capable o ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... production equipment 4B Equipment, assemblies, components including test and measurement equipment usable in development of nuclear explosive devices 4C Technology Category 5 Aerospace systems, equipment, including production and test equipment, and related technology 5A Rocket systems 5A1 Systems 5A2 Production and test equipment 5A3 Technology 5B Unmanned aerial vehicles 5C Avionics and navigation systems 5D Manned-aircraft, aero-engines, related equipment and components 5E Micro-light aircraft and powered 'hang-gliders' Category 6 [RESERVED] Category 7 Electronics, computers, and information technology including information security 7A Electronics 7B Electronic test equipment 7C Computers 7D Information technology including information security 7E [Reserved] Category 0 - Nuclear materials, nuclear-related other materials, equipment and technology Note: Export of these items is regulated under the Atomic Energy Act, 1962 and rules framed, and notifications/orders issued thereunder from time-to-time by the Department of Atomic Energy. The licensing authority for items in this category is the Department of Atomic Energy. An application for l ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... .e. less than 2000 ppm) in the form of metal, its alloys, compounds, manufactures thereof, waste or scrap of any of the foregoing. 0A304 Beryllium, its compounds, alloys and its minerals / concentrates including Beryl but excluding: a. beryllium windows used for x-ray machines and gamma ray detectors and b. beryl in the form of emeralds or aquamarines. 0A305 Lithium enriched in the Lithium-6 (6Li) isotope to greater than its natural isotopic abundance (i.e. more than 7.5%) and the products or devices containing enriched lithium such as elemental lithium, alloys, compounds, mixtures containing lithium, manufactures thereof, waste or scrap of any of the foregoing. 0A306 Niobium and Tantalum, their metals, alloys and minerals including columbite and tantalite. 0A307 Titanium alloys having both of the following characteristics: a. 'Capable of' an ultimate tensile strength of 900 MPa or more at 293 K (200C); and b. In the form of tubes or cylindrical solid forms (including forgings) with an outside diameter of more than 75 mm. Technical note: The phrase 'capable of' encompasses titanium alloys before or after heat treatment. 0A308 Tritium, tritium compounds or mixtures co ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ines or till the 1st January 2007, whichever occurs earlier and shall cease to be so thereafter. Alpha emitters controlled by this item include: Actinium-225 Actinium-227 Americium-242m Californium-248 Californium-250 Californium-252 Californium-253 Californium-254 Curium-240 Curium-241 Curium-242 Curium-243 Curium244 Einsteinium-252 Einsteinium-253 Einsteinium254 Einsteinium-255 Fermium-257 Gadolinium-148 Mendelevium-258 Neptunium-235 Plutonium-236 Plutonium-237 Plutonium-238 Plutonium-241 Polonium-209 Polonium-210 Polonium-208 Radium-223 Thorium-228 Thorium-227 Uranium-230 Uranium-232 0B Prescribed Equipment 0B001 Nuclear Reactors; associated equipment, components, and systems specially designed, prepared, or adapted or used or intended to be used in such reactors as follows: a. Complete nuclear reactors b. Nuclear reactor vessels c. Nuclear reactor fuel charging and discharging machines d. Nuclear reactor control rods and equipment e. Nuclear reactor pressure tubes f. Zirconium tubes and assemblies of tubes in which hafnium to zirconium ratio is 1:500 or less g. Primary coolant pumps h. Nuclear reactor internals i. Heat exchangers ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... de remote actions in radiochemical separation operations or hot cells 0B004 Plants for treatment, handling, storage and transportation of radioactive wastes from nuclear reactors or from plants for processing Source Materials or Special Fissionable Materials or from nuclear reprocessing plants; irradiated nuclear fuel; Special Fissionable Materials, and equipment specially designed, prepared, adapted, or intended to be used therefor. 0B005 All systems, associated equipment, components for separation or enrichment of isotopes of uranium, plutonium, lithium or boron, other than analytical instruments, specially designed, prepared, adapted, used or intended to be used therefor as follows: a. Gas centrifuges and assemblies and components specially designed or prepared for use in gas Centrifuges b. Specially designed or prepared auxiliary systems, equipment and components for gas centrifuge enrichment plants c. Specially designed or prepared assemblies and components for use in gaseous diffusion enrichment d. Specially designed or prepared auxiliary systems, equipment and components for use in gaseous diffusion enrichment e. Specially designed or prepared systems, equipment and ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... O-Alkyl, ( e.g. Tabun: O-Ethyl N,N,-dimethyl phosphoramidocyanidate (3). O-Alkyl (H or < C10, incl. cycloalkyl) S-2-Dialkyl (Me, Et, n-Pr or i-Pr)-aminoethyl alkyl (Me, Et, n-Pr or i-Pr) phosphonothiolates and corresponding alkylated or protonated salts e.g. VX: O-Ethyl S-2 diisopropylaminoethyl methyl phosphonothiolate (4). Sulphur mustards: 2-Chloroethylchloromethylsulphide Mustard gas: Bis (2-chloroethyl) sulphide Bis (2-chloroethylthio) methane Sesquimustard:1,2-Bis (2-chloroethylthio) ethane 1,3-Bis (2-chloroethylthio)-n-propane 1,4-Bis (2-chloroethylthio)-n-butane 1,5-Bis (2-chloroethylthio)-n-Pentane Bis (2-Chloroethylthiomethyl) ether O-Mustard: Bis (2-Chloroethylthiomethyl) ether (5). Lewisites: Lewisite 1: 2-Chlorovinyldichloroarsine Lewisite 2: Bis (2-Chlorovinyl) chloroarsine Lewisite 3: Tris (2-Chlorovinyl) arsine (6). Nitrogen mustards: HN1: Bis (2-chloroethyl) ethylamine HN2: Bis (2-chloroethyl) Chloroarsine HN3: Tris (2-chloroethyl) amine (7). Saxitoxin (8). Ricin (9). Alkyl (Me, Et, n-Pr or I-Pr) phosphonyldifluorides e.g. DF: Methyl phosphonyldifluoride (10).O-Alkyl (H or < C10, incl. cycloalkyl) O-2 dialkyl (Me, Et, n-Pr or i-Pr)-aminoe ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... hyl-2 -chlorides and corresponding protonated salts 11. N, N-Dialkyl (Me, Et, n-Pr or i-Pr) aminoethane-2-ols and corresponding protonated salts Exemptions: N,N-Dimethylaminoethanol and corresponding protonated salts N,N-Diethylaminoethanol and corresponding protonated salts 12. N, N-Dialkyl (Me, Et, n-Pr or i-Pr) aminoethane-2-thiols and corresponding protonated salts 13. Thiodiglycol: Bis(2-hydroxyethyl) sulphide 14. Pinacolyl alcohol: 3,3-Dimethylbutane-2-ol A List of commercially important Schedule-2 Chemicals of CWC is given below : Sl. No. Name of Chemical Entry into Schedule CAS (Chemical Abstract Service) Numbers ITC(HS) codes 1. 2-Chloro N, N-Di-isopropyl ethylamine 2B10 4261-68-1 29211911 2. Diethyl amino Ethanethiol 2B12 100-38-9 29221910 3. O, O, Dimethyl Methyl Phosphonate 2B04 756-79-6 29209045 4. 2-Hydroxy N, N-Diisopropyl Ethylamine 2B11 96-80-0 29221111 5. N, N-Diethyl Amino ethyl Chloride Hydrochloride 2B10 869-24-9 29221112 6. Di-ethyl Amino ethanethiol Hydrochloride 2B12 1942-52-5 29221113 7. Di-Methyl Amino ethyl chloride Hydrochloride 2B10 4584-46-7 29221114 8. Di-Methyl Amino ethanethiol 2B12 108-02-1 292211 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... rt to the National Authority, Chemicals Weapons Convention, Cabinet Secretariat; the Ministry of External Affairs (D&ISA); the Department of Chemicals & Petro-chemicals, and the DGFT of such exports in the prescribed format ( Aayat Niryat Form ) along with the End-Use Certificate and submit to the DGFT a copy of the bill of entry into the destination State Party within 30 days of delivery. Export of chemicals as specified below to states not party to the Chemical Weapons Convention shall continue to be restricted and will be allowed only against an export licence, and in that case also exporters shall submit to the DGFT a copy of the bill of entry into the destination country within 30 days of export. Sl.No. Name of Chemical Entry into Schedule CAS Numbers ITC (HS) codes 1. Phosgene : ( Carbonyl dichloride) 3A01 75-44-5 28121010 2. Cyanogen chloride [(CN) C1] 3A02 506-77-4 28510091 3. Hydrocyanic acid 3A03 74-90-8 28111910 4. Chloropicrin: Trichloronitro-Methane 3A04 76-06-2 29049080 5. Phosphorus Oxychloride 3B05 10025-87-3 28121030 6. Phosphorus trichloride 3B06 7719-12-2 28121021 7. Phosphorous Pentachloride 3B07 10026-13-8 28121022 8. ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... coli 2C005 Cryptosporidium spp. 2C006 Leishmania species 2C007 Naegleria australiensis 2C008 Naegleria fowleri 2C009 Plasmodium falciparum 2C010 Pneumocystis carinii 2C011 Schistosoma mansoni 2C012 Schistosoma japonicum 2C013 Schistosoma hemotobium 2C014 Toxoplasma gondii 2C015 Trichinella spiralis 2C016 Trypanosoma bruiei 2D Viruses, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following: 2D001 African Horse Sickness virus 2D002 African Swine Fever virus 2D003 Avian influenza virus 2D004 Blue tongue virus 2D005 Camel pox virus 2D006 Chikungunya virus 2D007 Crimean-Congo hemorrhagic fever virus 2D008 Dengue virus 2D009 Eastern equine encephalitis virus 2D010 Ebola fever virus 2D011 Encephalomyocarditis virus (EMC) 2D012 Foot and Mouth Disease virus (all serotypes and subtypes) 2D013 Guanirito virus 2D014 Goatpox virus 2D015 Hantaan virus 2D016 Herpes virus simiae (monkey B virus) 2D017 Herpes ateles, Herpes saimiri 2D018 HIV- 1 & HIV-2 and other strains of ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... clus ulei 2G008 Peronospora hyoscyami de Bary f.sp. tabacina (Adam) skalicky 2G009 Phytophthora infestans 2G010 Puccinia graminis 2G011 Puccinia erianthi 2G012 Puccinia striiformiis (Puccinia glumarum) 2G013 Pyricularia oryzae 2G014 Pseudomonas solanacearum 2G015 Peronospora hyscyami de Bary 2G016 Ralstonia solanacearum 2G017 Sugar cane Fiji disease virus 2G018 Sclerotinia sclerotiorum 2G019 Tilletia indica 2G020 Thrips palmi 2G021 Ustilago Maydis 2G022 Xanthomonas albilineans 2G023 Xanthomonas campestris pv citri 2G024 Xanthomonas campestris pv oryzae 2H Genetically Modified Organisms 2H001 Genetically-modified micro-organisms or genetic elements that contain nucleic acid sequences associated with pathogenicity and are derived from organisms specified above in 2A, 2B, 2C, 2D, 2E and 2H. Genetically-modified micro-organisms or genetic elements that contain nucleic acid sequences coding for any of the toxins specified above in 2F Category 3 Materials, Materials Processing Equipment and related technologies 3A Materials 3A1 Special Materials 3A101 Zirconium, magnesium and alloys of these in particle size less than 60 µm 3A102 Maraging ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ures thereof, including resin impregnated fibre prepregs and metal coated fibre preforms made either with an organic matrix or metal matrix utilizing fibrous or filamentary reinforcements, specially designed for use in rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets), unmanned aerial vehicles and cruise missiles and subsystems thereof; b. Resaturated pyrolized (i.e. Carbon-Carbon) materials specially designed for rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets), unmanned aerial vehicles and cruise missiles; c. Fine grain re-crystalised bulk graphites and pyrolytic or fibrous reinforced graphites for rocket nozzles and re-entry vehicles nose tips; d. Ceramic composite materials(dielectric constant less than 6 at any frequency from 100 MHz to 100 GHz) for use in missile radomes and nose tips; e. Structured materials and coatings for reduced radar reflectivity; f. Bulk machinable silicon-carbide reinforced unfired ceramic usable in re-entry vehicles nose tips. 3A3 Rocket propellants and constituent chemicals: 3A301 Propulsive substances - Hydrazine, Monomethylhydrazine (MMH), Unsym ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ); c. Triaminotrinitrobenzene (TATB); d. Hexanitrostilbene (HNS). License applications for the export of items at 3A401a and 3A401b will normally be denied. 3A5 Stealth materials 3A501 Materials (and devices therefrom) for reduced observables such as radar reflectivity, ultraviolet/infrared signatures and acoustic signatures; 3A502 Structural materials and coatings (including paints) specially designed for reduced or tailored reflectivity or emissivity in the microwave, infrared or ultraviolet spectra other than coatings (including paints) when specially used for thermal control of satellites. 3A503 "Technology" related to the production or use of items in 3A. 3B Materials processing and production equipment, and related technology 3B001 Remote manipulators that provide mechanical translation of human operator actions by electrical, hydraulic or mechanical means and operating arm and terminal fixture that can be used to provide remote actions; 3B002 Multidirectional, multidimensional weaving and interlacing machines, including adapters and modification kits for weaving, interlacing or braiding fibres to fabricate composite structures except textile machinery which ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... with organisation of the process in an argon-water environment. 3B017 Sputter ion pumps 3B018 Technical data (including processing conditions) and procedures for the regulation of temperature, pressure or atmosphere in autoclaves or hydroclaves when used for the production of composites or partially processed composites. 3B019 "Software" specially designed or modified for the use of equipment for the production and handling of materials specified in 3A 3B020 "Technology" related to the development, production or use of items in 3B 3C [Reserved] 3D Chemical and biomaterial manufacturing and handling equipment and facilities: 3D001 Reaction vessels, reactors or agitators, storage tanks, containers or receivers, heat exchangers or condensers, distillation or absorption columns, valves, remotely operated filling equipment, multi-walled piping, bellows, diaphragm pumps, vacuum pumps, fans, compressors, blowers, gas (including air) handling or other substance-transfer equipment wholly or partly made from any of the following materials; a. Nickel or alloys with more than 40% nickel by weight b. Alloys with more than 25% nickel and 20% chromium by weight (e.g. 'Hastello ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... numerical control' units or a computer control. c. Rotor-forming mandrels designed to form cylindrical rotors of inside diameter between 75 and 400 mm. Note: Item 4A001a and 4A001b include machines which have only a single roller designed to deform metal plus two auxiliary rollers which support the mandrel, but do not participate directly in the deformation process. 4A002 - Machine tools, as follows, for removing or cutting metals, ceramics, or composites, which, according to the manufacturer's technical specifications, can be equipped with electronic devices for simultaneous "contouring control" in two or more axes: a. Machine tools for turning, that have "positioning accuracies" with all compensations available better (less) than 6 µm along any linear axis (overall positioning) for machines capable of machining diameters greater than 35mm; Note: Item 4A002a does not control bar machines, limited to machining only bar feed through, if maximum bar diameter is equal to or less than 42 mm and there is no capability of mounting chucks. Machines may have drilling and/or milling capabilities for machining parts with diameters less than 42 mm. b. Machine tools for milling, having an ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 4A002 refers to each linear axis, there will be as many stated "positioning accuracy" values as there are linear axes; 6. If any axis of a machine tool not controlled by Items 4A002a, 4A002b, or 4A002c has a stated "positioning accuracy" of 6 µm or better (less) for grinding machines, and 8 µm or better (less) for milling and turning machines, both according to ISO 230/2 (1988), then the builder should be required to reaffirm the accuracy level once every eighteen months. Technical Notes 1. Axis nomenclature shall be in accordance with International Standard ISO 841, "Numerical Control Machines Axis and Motion Nomenclature". 2. Not counted in the total number of contouring rotary axes are secondary parallel contouring rotary axes the centre line of which is parallel to the primary rotary axis. 3. Rotary axes do not necessarily have to rotate over 360 degrees. A rotary axis can be driven by a linear device, e.g., a screw or a rack and-pinion. 4A003 - Dimensional inspection machines, instruments, or systems, as follows: a. Computer controlled or numerically controlled dimensional inspection machines having both of the following characteristics: 1. Two or more axes; and 2. A ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ues in this item represent plus/minus, i.e., not total band. 4A004 - Controlled atmosphere (vacuum or inert gas) induction furnaces, and power supplies therefor, as follows: a. Furnaces having all of the following characteristics: 1. Capable of operation at temperatures above 1123 K (850 °C); 2. Induction coils 600 mm or less in diameter; and 3. Designed for power inputs of 5 kW or more; Note: Item 4A004a does not control furnaces designed for the processing of semiconductor wafers. b. Power supplies, with a specified output power of 5 kW or more, specially designed for furnaces specified in Item 4A004a. 4A005 - 'Isostatic presses', and related equipment, as follows: a. 'Isostatic presses' as specified in 5A208; b. Dies, moulds, and controls specially designed for the 'isostatic presses' specified in Item 4A005a. Technical Notes: 1. In Item 4A005 ´Isostatic presses' means equipment capable of pressurizing a closed cavity through various media (gas, liquid, solid particles, etc.) to create equal pressure in all directions within the cavity upon a work piece or material. 2. In Item 4A005 the inside chamber dimension is that of the chamber in which both the working temperat ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... litres); and 2. Made of or coated with any of the following materials, having a purity of 98% or greater by weight: a. Calcium fluoride (CaF2); b. Calcium zirconate (metazirconate) (CaZrO3); c. Cerium sulphide (Ce2S3); d. Erbium oxide (erbia) (Er2O3); e. Hafnium oxide (hafnia) (HfO2); f. Magnesium oxide (MgO); g. Nitrided niobium-titanium-tungsten alloy (approximately 50% Nb, 30% Ti, 20% W); h. Yttrium oxide (yttria) (Y2O3); or i. Zirconium oxide (zirconia) (ZrO2); b. Crucibles having both of the following characteristics: 1. A volume of between 50 cm3 (50 ml) and 2000 cm3 (2 litres); and 2. Made of or lined with tantalum, having a purity of 99.9% or greater by weight; c. Crucibles having all of the following characteristics: 1. A volume of between 50 cm3 (50 ml) and 2000 cm3 (2 litres); 2. Made of or lined with tantalum, having a purity of 98% or greater by weight; and 3. Coated with tantalum carbide, nitride, boride, or any combination thereof. 4A009 - Platinized catalysts specially designed or prepared for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from heavy water or for the production of heavy wate ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... illators. f. Alexandrite lasers having all of the following characteristics: 1. Operating at wavelengths between 720 and 800 nm; 2. A bandwidth of 0.005 nm or less; 3. A repetition rate greater than 125 Hz; and 4. An average output power greater than 30 W; g. Pulsed carbon dioxide lasers having all of the following characteristics: 1. Operating at wavelengths between 9000 and 11000 nm; 2. A repetition rate greater than 250 Hz; 3. An average output power greater than 500 W; and 4. Pulse width of less than 200 ns; Note: Item 4A012g does not control the higher power (typically 1 to 5 kW) industrial CO2 lasers used in applications such as cutting and welding, as these latter lasers are either continuous wave or are pulsed with a pulse width greater than 200 ns. h. Pulsed excimer lasers (XeF, XeCl, KrF) having all of the following characteristics: 1. Operating at wavelengths between 240 and 360 nm; 2. A repetition rate greater than 250 Hz; and 3. An average output power greater than 500 W; i. Para-hydrogen Raman shifters designed to operate at 16 µm output wavelength and at a repetition rate greater than 250 Hz. 4A013 - Valves having all of the following characteristics ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... atability at ambient temperature. 4A018 - Vacuum pumps having all of the following characteristics: a. Input throat size equal to or greater than 380 mm; b. Pumping speed equal to or greater than 15 m3/s; and c. Capable of producing an ultimate vacuum better than 13.3 mPa. Technical Notes: 1. The pumping speed is determined at the measurement point with nitrogen gas or air. 2. The ultimate vacuum is determined at the input of the pump with the input of the pump blocked off. 4A019 - Electrolytic cells for fluorine production with an output capacity greater than 250 g of fluorine per hour. 4A020 - Rotor fabrication or assembly equipment, rotor straightening equipment, bellows-forming mandrels and dies, as follows: a. Rotor assembly equipment for assembly of gas centrifuge rotor tube sections, baffles, and end caps; Note: Item 4A020a includes precision mandrels, clamps, and shrink fit machines. b. Rotor straightening equipment for alignment of gas centrifuge rotor tube sections to a common axis; Technical Note: In Item 4A020b such equipment normally consists of precision measuring probes linked to a computer that subsequently controls the action of, for example, pneumatic ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Item 4A023 includes separators with the ion sources and collectors both in the magnetic field and those configurations in which they are external to the field. Technical Note: A single 50 mA ion source cannot produce more than 3 g of separated highly enriched uranium (HEU) per year from natural abundance feed. 4A024 - Mass spectrometers capable of measuring ions of 230 atomic mass units or greater and having a resolution of better than 2 parts in 230, as follows, and ion sources therefor: a. Inductively coupled plasma mass spectrometers (ICP/MS); b. Glow discharge mass spectrometers (GDMS); c. Thermal ionisation mass spectrometers (TIMS); d. Electron bombardment mass spectrometers which have a source chamber constructed from, lined with or plated with materials resistant to UF6; e. Molecular beam mass spectrometers having either of the following characteristics: 1. A source chamber constructed from, lined with or plated with stainless steel or molybdenum, and equipped with a cold trap capable of cooling to 193 K (-80 °C) or less; or 2. A source chamber constructed from, lined with or plated with materials resistant to UF6; f. Mass spectrometers equipped with a micro-fluor ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... of 35 K (-238 ºC) or less; b. Designed for operation at internal pressures of 0.5 to 5 MPa; c. Constructed of either: 1. Stainless steel of the 300 series with low sulphur content and with an austenitic ASTM (or equivalent standard) grain size number of 5 or greater; or 2. Equivalent materials which are both cryogenic and H2-compatible; and d. With internal diameters of 1 m or greater and effective lengths of 5 m or greater. 4A030 - Ammonia synthesis converters or synthesis units, in which the synthesis gas (nitrogen and hydrogen) is withdrawn from an ammonia/hydrogen high-pressure exchange column and the synthesized ammonia is returned to said column. 4B - Equipment, assemblies and components, including test and measurement equipment usable in development of nuclear explosive devices 4B001 - Photomultiplier tubes having both of the following characteristics: a. Photocathode area of greater than 20 cm2; and b. Anode pulse rise time of less than 1 ns. 4B002 - Flash X-ray generators or pulsed electron accelerators having either of the following sets of characteristics: a. An accelerator peak electron energy of 500 keV or greater but less than 25 MeV; and b. With a figure ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 1. Proximity focused image intensifier tubes having the photocathode deposited on a transparent conductive coating to decrease photocathode sheet resistance; 2. Gate silicon intensifier target (SIT) vidicon tubes, where a fast system allows gating the photoelectrons from the photocathode before they impinge on the SIT plate; 3. Kerr or Pockels cell electro-optical shuttering; 4. Other framing tubes and solid-state imaging devices having a fast image gating time of less than 50 ns specially designed for cameras specified in Item 4B005c. 4B006 - Specialized instrumentation for hydrodynamic experiments, as follows: a. Velocity interferometers for measuring velocities exceeding 1 km/s during time intervals of less than 10 µs; b. Manganin gauges for pressures greater than 10 GPa; c. Quartz pressure transducers for pressures greater than 10 GPa. Note: Item 4B006a includes velocity interferometers such as VISARs (Velocity interferometer systems for any reflector) and DLIs (Doppler laser interferometers). 4B007 - High-speed pulse generators having both of the following characteristics: a. Output voltage greater than 6 V into a resistive load of less than 55 ohms; and b. 'Pulse t ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 009b5 'rise time' is defined as the time interval from 10% to 90% current amplitude when driving a resistive load. 4B010 - Switching devices as follows: a. Cold-cathode tubes, whether gas filled or not, operating similarly to a spark gap, having all of the following characteristics: 1. Containing three or more electrodes; 2. Anode peak voltage rating of 2.5 kV or more; 3. Anode peak current rating of 100 A or more; and 4. Anode delay time of 10 µs or less; Note: Item 4B010a includes gas krytron tubes and vacuum sprytron tubes. b. Triggered spark-gaps having both of the following characteristics: 1. Anode delay time of 15 µs or less; and 2. Rated for a peak current of 500 A or more; c. Modules or assemblies with a fast switching function having all of the following characteristics: 1. Anode peak voltage rating greater than 2 kV; 2. Anode peak current rating of 500 A or more; and 3. Turn-on time of 1 µs or less. 4B011 - Pulse discharge capacitors having either of the following sets of characteristics: a. 1. Voltage rating greater than 1.4 kV; 2. Energy storage greater than 10 J; 3. Capacitance greater than 0.5 µF; and 4. Series inductance less than 50 nH; or b. 1. ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ls; gun tunnels; aeroballistic ranges. 5A202 Test and production facilities designed to handle solid or liquid fuel rockets, rocket stages, re-entry vehicles. 5A203 Test benches/stands, usable for complete rocket systems and subsystems (including ballistic missile systems, space launch vehicles and sounding rockets) which have the capacity to handle solid or liquid propellant rockets, motors or engines, or which are capable of simultaneously measuring the three axial thrust components. 5A204 Vibration test equipment (vibration test systems and vibration thrusters) and components using digital control techniques and feedback or closed loop test equipment and software thereof (Refer 4A006). 5A205 Flow-forming machines and specially designed components thereof which, according to the manufacturers technical specification, 1. can be equipped with numerical control units or a computer control, even when not equipped with such units at delivery; and 2. have more than two axes which can be coordinated simultaneously for contouring control. Note: Item 5A205 includes machines which have only a single roller designed to deform metal plus two auxiliary rollers which support the ma ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ollows:- a. apparatus, devices and vehicles, designed or modified for the transport, handling, control, activation and launching of the systems. b. gravity meters (gravimeters), gravity gradiometers, and specially designed components thereof, designed or modified for airborne or marine use usable for complete rocket systems and for complete unmanned aerial vehicle systems (including cruise missile systems target drones and reconnaissance drones) c. telemetry and tele-command equipment, including ground equipment, designed or modified for complete rocket systems and complete unmanned aerial vehicle systems and cruise missiles but not control equipment designed or modified for manned aircraft or satellites, control ground based equipment designed or modified for terrestrial or marine application, control equipment designed for commercial, civil or 'safety of life' (e.g. data integrity, flight safety) GNSS services d. radomes designed to withstand a combined thermal and pressure shock usable in protecting rocket systems, unmanned aerial vehicles and cruise missiles against nuclear effects (eg. electro-magnetic pulse (EMP), X-rays, combined blast and thermal effects). 5A3 Technol ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... as follows: a. Hydraulic, mechanical, electro-optical or electro-mechanical flight control systems (including fly-by-wire systems); b. Attitude control equipment; c. Design technology for integration of flight control, guidance, and propulsion data into a flight management system for optimization of rocket system trajectory. d. Specially designed test, calibration, and alignment thereof. e. "Software" specially designed or modified for the "use" of systems specified above. 5C007 Integrated navigation system incorporating an inertial measurement device (example: an attitude and heading reference system, inertial reference unit, or inertial navigation system); one or more external sensor used to update the position and/or velocity, either periodically or continuously throughout the flight (example: satellite navigation receiver, radar altimeter and/or Doppler radar); integration hardware and software 5C008 "Production equipment" and other test, calibration and alignment equipment, designed or modified to be used with equipment specified in 5C001 - 5C004 and 5C007. 5C009 Equipment used to characterize mirrors for laser gyros such as scatterometer, reflectometer and profilom ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... /infrared trackers and related software. 5C015 Balancing machines capable of balancing rotors/assemblies and correcting unbalance in two planes or more. 5C016 Indicator heads or balancing instrumentation designed or modified for use with balancing machines 5C017 Motion simulators/rate tables (equipment capable of simulating motion) having all of the following characteristics two axes or more slip rings capable of transmitting electrical power and/or signal information 5C018 Position tables (equipment capable of precise rotary positioning in any axes) having two axes or more and a position accuracy equal to or better than 5 arc second 5C019 Centrifuges capable of imparting accelerations and having slip rings capable of transmitting electrical power and signal information 5C020 Design technology for integration of air vehicle fuselage, propulsion system and lifting control surfaces designed or modified for the Unmanned aerial vehicle systems to optimize aerodynamic performance throughout the flight regime of an Unmanned aerial vehicle system 5C021 Design technology for integration of the flight control, guidance, and propulsion data into a flight management system, desi ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... een certified for civil use by the civil aviation authority of India, and 2. Are not configured for military use and are not fitted with equipment or attachments specially designed or modified for military use; Note 2: The control in 5D001b and 5D001c on specially designed components and related equipment for non-military "aircraft" or aero-engines modified for military use applies only to those military components and to military related equipment required for the modification to military use. 5E Microlight aircraft and powered 'hang-gliders' Category 6: [RESERVED] Category 7: Electronics, computers, and information technology including information security 7A Electronics 7A001 High-power microwave devices including tubes, travelling wave tubes (TWT) and phase shifters, and continuous wave and pulsed high power microwave travelling wave tube amplifiers (TWTA) operating at frequencies higher than 31 GHz, and their power supplies. 7A002 Microwave monolithic integrated circuits (MMIC) operating at frequencies above 3 GHz and surface acoustic wave (SAW) devices operating at frequencies above 2.5 GHz. 7A003 Phased array antennas and their elements 7A004 Radiation-ha ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... mputers (individually of any CTP rating) enabling a CTP of more than 75000 Mtops to be achieved by the 'parallelised' configuration" Technical notes: 1. The Composite Theoretical Performance (CTP) rating is to be calculated in accordance with the calculation scheme separately notified in this regard. 2. Individual digital computers each with a CTP rating of 75000 Mtops or less do not require an export license to any destination or end-user, unless supplied with (b) above. 3. "Digital Computers' includes (1) hybrid computers incorporating 'digital computers' or specified in (a) above, systolic array computers, neural computers, optical computers, vector processors, digital signal processors, logical processors (2) digital electronic equipment designed for 'image enhancement' or signal processing other than when supplied as integral adjuncts to medical imaging (eg CAT-scanning) equipment. 7C002 Specially designed software, and/or related specially designed analogue or hybrid computers, digital differential analysers for modelling, simulation, or design integration of rocket systems, unmanned aerial vehicles and cruise missiles. 7D Information technology including information ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
