9911796707
TMI BlogEffective rates of duty on various iron and steel productsX X X X Extracts X X X X X X X X Extracts X X X X ..... and falling under the heading Nos. or sub-heading Nos. of the Schedule to the Central Excise Tariff Act, 1985 (5 of 1986) as are specified in the corresponding entry in column (2) of the said Table, from so much of the duty of excise leviable thereon which is specified in the said Schedule, as is in excess of the amount calculated at the rate specified in the corresponding entry in column (4) of the said Table. TABLE S. No. Heading No./Sub-heading No. Description of goods Rate (1) (2) (3) (4) 01. 72.01 Pig iron and spiegeleisen in pigs, blocks or other primary forms Rs. 200 per tonne 02. 72.03 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iro ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ) other Rs. 700 per tonne 7208.40 (iv) skelp Rs. 700 per tonne (v) other flat products - 7208.91 (a) exceeding 5 mm in thickness Rs. 500 per tonne 7208.99 (b) other Rs. 700 per tonne 08. Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated - 7209.10 (i) plates Rs. 600 per tonne 7209.20 (ii) sheets Rs. 900 per tonne 7209.30 (iii) strips Rs. 900 per tonne 7209.90 (iv) other Rs. 900 per tonne 09. Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated - (i) plated or coated with zinc - 7210.11 (a) corrugated Rs. 1200 per tonne 7210.19 (b) other Rs. 1200 per tonne 7210.20 (ii) ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... , not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - 7214.10 (i) forged Rs. 800 per tonne 7214.20 (ii) of free-cutting steel Rs. 500 per tonne 7214.90 (iii) other Rs. 500 per tonne 14. other bars and rods of iron or non-alloy steel - 7215.10 (i) of free-cutting steel not further worked than cold-formed or cold-finished Rs. 500 per tonne 7215.20 (ii) other, not further worked than cold-formed or cold-finished Rs. 500 per tonne 7215.30 (iii) plated or coated with zinc Rs. 1200 per tonne 7215.40 (iv) plated or coated with other base metals Rs. 1200 per tonne 7215.90 (v) other Rs. 500 per tonne 15. Angles, shapes and sections of iron or non-alloy ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... angles, shapes and sections of stainless steel - 7222.10 (i) forged bars and rods Rs. 1500 per tonne 7222.10 (ii) bars and rods, not further worked than hot-rolled, hot-drawn or extruded Rs. 1000 per tonne 7222.20 (iii) bars and rods, not further worked than cold-formed or cold-finished Rs. 1000 per tonne 7222.30 (iv) other bars and rods Rs. 1000 per tonne 7222.40 (v) angles, shapes and sections, forged Rs. 1500 per tonne 7222.40 (vi) other angles, shapes and sections Rs. 1000 per tonne 22. 72.23 Wire of stainless steel Rs. 1000 per tonne 23. Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel - 72.24 (i) forged Rs. 800 per tonne 72.24 (ii) other Rs. 500 per ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... l Rs. 500 per tonne 7228.20 (ii) bars and rods of silico-manganese steel Rs. 500 per tonne 7228.30 (iii) other bars and rods, not further worked than hot-rolled, hot-drawn or extruded Rs. 500 per tonne 7228.40 (iv) other bars and rods, not further worked than forged Rs. 800 per tonne 7228.50 (v) other bars and rods, not further worked than cold-formed or cold-finished Rs. 500 per tonne 7228.60 (vi) other bars and rods Rs. 500 per tonne (vii) angles, shapes and sections - 7228.71, 7228.72 and 7228.79 (a) forged Rs. 800 per tonne 7228.71 (b) not further worked than hot-rolled, hot-drawn or extruded Rs. 500 per tonne 7228.72 (c) not further worked than cold-formed or cold-finished Rs. 500 per tonne 7228.79 ( ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... s-sections, the external diameter of which exceeds 406.4 mm, of iron. Rs. 200 per tonne 35. 7306.10 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed of iron. Rs. 200 per tonne 36. 73.27 Goods and materials of Chapter 73 obtained by breaking up of ships, boats and other floating structures manufactured in India. Rs. 1115 per tonne Explanation - For the purposes of this notification, - (1) "plates" means a hot or cold-rolled flat product, rolled from an ingot or slab or sheet bar or produced by cold reduction of coils, in rectangular cross-section of thickness exceeding 5 mm but not exceeding 100 mm and width of 600 mm and above, and supplied in straight lengths; (2) "unive ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
