9911796707
TMI BlogEffective rates of excise duty on iron and steel and products thereonX X X X Extracts X X X X X X X X Extracts X X X X ..... ate specified in the corresponding entry in column (3) of the said Table. THE TABLE S. No. Description of goods Rate (1) (2) (3) 01. Pig iron and spiegeleisen in pigs, blocks or other primary forms Rs. 80 per tonne 02. Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms Rs. 80 per tonne 03. Ferrous waste and scrap; remelting scrap ingots of iron or steel - (i) of iron Rs. 80 per tonne (ii) of alloy steel Rs. 365 per tonne (iii) of stainless steel Rs. 365 per tonne (iv) other Rs. 365 per tonne 04. Granules and powders, of pig iron, spiegeleisen, iron or ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... tonne (b) other Rs. 935 per tonne (ii) plated or coated with tin Rs. 970 per tonne 10. Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated - (i) flats - (a) cold-rolled (cold reduced) Rs. 715 per tonne (b) hot-rolled, exceeding 5 mm in thickness Rs. 365 per tonne (c) other Rs. 500 per tonne (ii) universal plates Rs. 385 per tonne (iii) hoops Rs. 500 per tonne (iv) sheets - (a) cold-rolled (cold reduced) Rs. 715 per tonne (b) hot-rolled, exceeding 5 mm in thickness Rs. 365 per tonne (c) other Rs. 500 per tonne (v) strips - (a) cold-rolled (cold reduced) Rs. 715 per tonne (b) hot-rolled, exceeding 5 mm in thickness Rs. 365 per tonne (c) ot ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... cold-finished Rs. 365 per tonne (iii) plated or coated with zinc Rs. 935 per tonne (iv) plated or coated with other base metals Rs. 970 per tonne (v) other Rs. 365 per tonne 16. Wire of iron or non-alloy steel other than electric resistance wire (including electric resistance heating wire). Rs. 365 per tonne 17. Stainless steel in ingots or other primary forms; semi-finished products of stainless steel - (i) forged Rs. 550 per tonne (ii) other Rs. 365 per tonne 18. Flat-rolled products of stainless steel, of a width of 600 mm or more - (i) not further worked than hot-rolled, whether or not in coils - (a) of a thickness exceeding 5 mm Rs. 365 per tonne (b) Other Rs. 500 per tonne (ii) not further worked that ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... of a thickness exceeding 5 mm Rs. 365 per tonne (b) other Rs. 500 per tonne (iv) other, not further worked than cold-rolled (cold reduced) Rs. 715 per tonne (v) other Rs. 715 per tonne 25. Flat-rolled products of other alloy steel, of a width of less than 600 mm - (i) of silicon-electrical steel Rs. 500 per tonne (ii) of high speed steel Rs. 500 per tonne (iii) other - (a) not further worked than hot-rolled, of a thickness exceeding 5 mm Rs. 365 per tonne (b) not further worked than hot-rolled, of a thickness not exceeding 5 mm Rs. 500 per tonne (c) not further worked than cold-rolled (cold- reduced) Rs. 715 per tonne (d) other Rs. 715 per tonne 26. Bars and rods, hot-rolled, in irregularly wound coils, o ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... tured in India. Rs. 1400 per tonne 30. Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel :- (i) sheet piling Rs. 365 per tonne (ii) angles, shapes and sections Rs. 365 per tonne 31. Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates, base plates, rail clips, bedplates, ties and other material specialized for jointing or fixing rails - (i) rails Rs. 365 per tonne (ii) sleepers (cross-ties) Rs. 365 per tonne 32. Tubes, pipes an ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
